新型整体-局部高阶剪切变形理论及层合板精化三角形单元

基于整体-局部位移方法,建立了一种高阶剪切变形理论。整体位移部分采用的是Reddy理论的位移模式（1984）,局部位移为LIXY等（1997）建立的1,2-3理论的局部函数。这一理论使满足自由表面条件的Red@理论进一步满足层间位移、应力连续,同时有效减少了1,2—3理论的未知数个数。基于此理论深入开展了有限元法研究,建立了满足C^1连续条件的精化三节点三角形单元（每个节点参数为9个）。计算结果表明：建立的精化单元能准确计算整体位移和层间应力。     

基于位移型控制方程的圆板热后屈曲分析

本文推导了圆板位移型热后屈曲方程，在设定挠度试函数后，由微分方程精确求出径向位移，然后用Galerkin法消去另一方程的残差，试函数由Legendre多项式构成，结果表明：本文方法是有效的，有关结果可供设计圆板时参考。     

剪切变形对FGM圆板轴对称屈曲的影响

基于一阶剪切变形板理论，推导了功能梯度材料圆形板在边界面内均布压力作用下的轴对称屈曲方程。在推导过程中，忽略了前屈曲耦合变形。利用一阶板理论与经典板理论屈曲方程之间在数学形式上的相似性，得到了一阶板理论下功能梯度材料圆板与经典板理论下均匀圆板临界屈曲载荷之间的解析关系。利用这个解析关系，可以直接从已有的较为简单的经典理论的结果，获得一阶板理论下功能梯度材料板的临界屈曲载荷。     

Thermal buckling of functionally graded circular plates based on higher order shear deformation plate theory

In this research, thermal buckling of circular plates compose of functionally graded material (FGM) is considered. Equilibrium and stability equations of a FGM circular plate under thermal loads are derived, based on the higher order shear deformation plate theory (3rd order plate theory). Assuming that the material properties vary as a power form of the thickness coordinate variable z and using the variational method, the system of fundamental partial differential equations is established. A buckling analysis of a functionally graded circular plate (FGCP) under various types of thermal loads is carried out and the result are given in closed-form solutions. The results are compared with the critical buckling temperature obtained for FGCP based on first order (1st order plate theory) and classical plate theory (0 order plate theory) given in the literature. The study concludes that higher order shear deformation theory accurately predicts the behavior of FGCP, whereas the first order and classical plate theory overestimates buckling temperature.     

A nonlinear composite plate theory

A general nonlinear theory for the dynamics of elastic anisotropic plates undergoing moderate-rotation vibrations is presented. The theory fully accounts for geometric nonlinearities (moderate rotations and displacements) by using local stress and strain measures and an exact coordinate transformation, which result in nonlinear curvatures and strain-displacement expressions that contain the von Karman strains as a special case. The theory accounts for transverse shear deformations by using a third-order theory and for extensionality and changes in the configuration due to in-plane and transverse deformations. Five third-order nonlinear partial-differential equations of motion describing the extension-extension-bending-shear-shear vibrations of plates are obtained by an asymptotic analysis, which reveals that laminated plates display linear elastic and nonlinear geometric couplings among all motions.     

Buckling of a sandwich symmetrical circular plate with varying mechanical properties of the core

This paper is devoted to analytical and numerical studies of global buckling of a sandwich circular plate. The mechanical properties of the plate core vary along its thickness, remaining constant in the facings. The middle surface of the plate is its symmetrical plane. The mathematical model of the plate is presented. The field of displacements is formulated using the proposed nonlinear hypothesis that generalizes the classical hypotheses. The equations of equilibrium are formulated based on the principle of stationary total potential energy. The proposed mathematical model of the displacements considers the shear effect. The numerical model of the plate is also formulated with a view to verify the analytical one. Numerical calculations are carried out for the chosen family of plates. The values of the critical load obtained by the analytical and numerical methods are compared. The effects of the material properties of the core and the change of the plate radius on the critical load intensity are presented.     

正交各向异性加筋板屈曲分析方法研究

为简化正交各向异性加筋板屈曲分析,本文将筋条位移场用其所在位置的板的位移表达,建立加筋板总势能,通过离散位移场,利用最小势能原理,推导出基于里兹法的正交各向异性加筋板屈曲分析控制方程,采用Matlab进行求解.基于本文推导的方程对单筋和三筋加筋板在不同压剪比下的屈曲荷载和模态进行分析,得到与Abaqus基本一致的结果....     

薄板结构加筋布局优化设计方法研究

提出一种两步优化策略,以加筋板结构的固有频率最大化为目标函数,以结构所受外载荷作用的最大静变形为约束条件,开展薄板结构加筋构件的布局优化设计研究。为了降低加筋布局优化的难度,提高优化设计的效率,将加筋等效为一系列弹性铰（点）支撑,以便快速获得加筋横向移动的灵敏度信息。在基本不改变结构重量的情形下,通过合理布局加筋位置,能显著改善结构的刚度分布,提高结构的整体承载能力。随后,小幅调整加筋的截面尺寸,以满足对结构最大变形的设计要求。最后,用两个算例验证了所提优化方法的可行性和有效性。     

基于任意四边形单元的约束阻尼板的模态分析

约束层阻尼技术目前广泛应用于薄壁结构的减振降噪中,关于约束阻尼板的有限元分析基本采用矩形或三角形单元,但用于模拟不规则形状结构时,会带来形状拟合上的困难或精度上的不足。基于离散Kirchhoff理论和Layer-wise层合板理论,利用Hamilton原理推导了约束阻尼板的任意四边形单元,并在此基础上考虑粘弹性材料本构的频率相关性,给出了约束阻尼结构复特征值问题的迭代求解算法。数值算例对不同形状的约束阻尼板结构进行了模态分析,通过与解析解、实验结果及有限元结果的对比,表明了本文单元的有效性和对不规则形状结构的适用性。     

Kármán-type equations for a higher-order shear deformation plate theory and its use in the thermal postbuckling analysis

Kármán-type nonlinear large deflection equations are derived occnrding to the Reddy’s higher-order shear deformation plate theory and used in the thermal postbuckling analysis The effects of initial geometric imperfections of the plate areincluded in the present study which also includes th thermal effects.Simply supported,symmetric cross-ply laminated plates subjected to uniform or nomuniform parabolictemperature distribution are considered. The analysis uses a mixed GalerkinGolerkinperlurbation technique to determine thermal buckling louds and postbucklingequilibrium paths.The effects played by transverse shear deformation plate aspeclraio, total number of plies thermal load ratio and initial geometric imperfections arealso studied.     

基于新修正偶应力理论的Mindlin层合板稳定性分析

基于新的各向异性修正偶应力理论提出一个Mindlin复合材料层合板稳定性模型。该理论包含纤维和基体两个不同的材料长度尺度参数。不同于忽略横向剪切应力的修正偶应力Kirchhoff薄板理论,Mindlin层合板考虑横向剪切变形引入两个转角变量。进一步建立了只含一个材料细观参数的偶应力Mindlin层合板工程理论的稳定性模型。计算了正交铺设简支方板Mindlin层合板的临界载荷。计算结果表明该模型可以用于分析细观尺度层合板稳定性的尺寸效应。     

Nonlinear vibration and buckling of circular sandwich plate under complex load

The nonlinear vibration fundamental equation of circular sandwich plate under uniformed load and circumjacent load and the loosely clamped boundary condi- tion were established by von Karman plate theory,and then accordingly exact solution of static load and its numerical results were given.Based on time mode hypothesis and the variational method,the control equation of the space mode was derived,and then the amplitude frequency-load character relation of circular sandwich plate was obtained by the modified iteration method.Consequently the rule of the effect of the two kinds of load on the vibration character of the circular sandwich plate was investigated.When circumjacent load makes the lowest natural frequency zero,critical load is obtained.     

复合材料层合板精化高阶理论及其精化三角形板单元

提出一种新的精化高阶理论，该理论满足层间位移、应力连续条件，由此建立了三角形精化板单元。该单元满足单元间Ｃ１类弱连续条件，其收敛性得到保证，且具有简单、高效率的优点。     

Vibration and stability of hybrid plate based on elasticity theory

The governing equations of elasticity theory for natural vibration and buck- ling of anisotropic plate are derived from Hellinger-Reissner＇s variational principle with nonlinear strain-displacement relations. Simply supported rectangular hybrid plates are studied with a precise integration method. This method, in contrast to the traditional finite difference approximation, gives highly precise numerical results that approach the full computer precision. So the results for natural vibration and stability of hybrid plates presented in the paper can be riewed as approximate analytical solutions. Furthermore, several types of coupling effects such as coupling between bending and twisting, and coupling between extension and bending, when the layer stacking sequence is asymmetric, are considered by only one set of governing equations.     

Benchmark trigonometric and 3-D elasticity solutions for an exponentially graded thick rectangular plate

The bending problem of a transverse load acting on an isotropic inhomogeneous rectangular plate using both two-dimensional (2-D) trigonometric and three-dimensional (3-D) elasticity solutions is considered. In the present 2-D solution, trigonometric terms are used for the displacements in addition to the initial terms of a power series through the thickness. The effects due to transverse shear and normal deformations are both included. The form of the assumed 2-D displacements is simplified by enforcing traction-free boundary conditions at the faces of the plate. No transverse shear correction factors are needed because a correct representation of the transverse shearing strain is given. The plate material is exponentially graded, meaning that Lamé’s coefficients vary exponentially in a given fixed direction (the thickness direction). A wide variety of results for the displacements and stresses of an exponentially graded rectangular plate are presented. The validity of the present 2-D trigonometric solution is demonstrated by comparison with the 3-D elasticity solution. The influence of aspect ratio, side-to-thickness ratio and the exponentially graded parameter on the bending response are investigated.     

功能梯度中厚圆/环板轴对称弯曲问题的解析解

基于一阶剪切变形板理论，导出了热/机载荷作用下，位移形式的功能梯度 中厚圆/环板轴对称弯曲问题的控制方程，获得了问题的位移和内力的一般解析解. 作为特 例，分别研究了边缘径向固定和可动的夹紧和简支的4种实心功能梯度圆板，给出了它们的 解，并分析了热/机载荷作用下解的形态，讨论了横向剪切变形、材料梯度常数和边界条件， 对板的轴对称弯曲行为的影响.     

Geometrically nonlinear isogeometric analysis of laminated composite plates based on higher-order shear deformation theory

In this paper, we present an effectively numerical approach based on isogeometric analysis (IGA) and higher-order shear deformation theory (HSDT) for geometrically nonlinear analysis of laminated composite plates. The HSDT allows us to approximate displacement field that ensures by itself the realistic shear strain energy part without shear correction factors (SCFs). IGA utilizing basis functions namely B-splines or non-uniform rational B-splines (NURBS) enables to satisfy easily the stringent continuity requirement of the HSDT model without any additional variables. The nonlinearity of the plates is formed in the total Lagrange approach based on the small strain assumptions. Numerous numerical validations for the isotropic, orthotropic, cross-ply and angle-ply laminated plates are provided to demonstrate the effectiveness of the proposed method.     

TORSIONAL VIBRATIONS OF RIGID CIRCULAR PLATE ON TRANSVERSELY ISOTROPIC SATURATED SOIL

An analytical method was presented for the torsional vibrations of a rigid disk resting on transversely isotropic saturated soil. By Hankel transform, the dynamic governing differential equations for transversely isotropic saturated poroelastic medium were solved. Considering the mixed boundary-value conditions, the dual integral equations of torsional vibrations of a rigid circular plate resting on transversely isotropic saturated soil were established. By appropriate transform, the dual integral equations were converted into a Fredholm integral equation of the second kind. Subsequently, the dynamic compliance coefficient, the torsional angular amplitude of the foundation and the contact shear stress were expressed explicitly. Selected examples were presented to analyse the influence of saturated soil's anisotropy on the foundation's vibrations.     

含圆孔拉伸板的近场动力学数值模拟

首先推导了非普通状态为基础的近场动力学基本方程,引入损伤理论.在对非普通状态为基础的近场动力学基本方程进行离散化后,编制了非普通状态为基础的近场动力学数值分析程序.利用非普通状态为基础的近场动力学理论对圆孔拉伸板的断裂和非断裂问题进行了数值模拟.数值结果表明近场动力学理论不仅能模拟非断裂问题,也能模拟断裂问题,而且该方法不需要借助任何外部断裂准则就能很好地模拟裂纹的扩展和连接过程,相对于其它的数值模拟方法具有很大的优势,同时它也为材料断裂问题提供了一种新方法和新思路.     

Studies on the dynamic buckling of circular plate irradiated by laser beam

ＩｎｔｒｏｄｕｃｔｉｏｎＤｙｎａｍｉｃｂｕｃｋｌｉｎｇｉｓａｎｉｍｐｏｒｔａｎｔｆａｉｌｕｒｅｐｈｅｎｏｍｅｎｏｎｏｆｔｈｅｓｔｒｕｃｔｕｒｅ ,ｗｈｉｃｈｉｓｉｒｒａｄｉａｔｅｄｂｙｓｔｒｏｎｇｌａｓｅｒｂｅａｍ .Ｂｕｃｋｌｉｎｇｗｉｌｌｒｅｓｕｌｔｉｎｔｈｅｃａｔａｓｔｒｏｐｈｉｃｒｅｄｕｃｔｉｏｎｏｆｅｎｄｕｒｉｎｇｌｏａｄｉｎｇａｂｉｌｉｔｙｏｆｓｔｒｕｃｔｕｒｅｓａｎｄｃａｕｓｅｓｏｍｅｏｔｈｅｒｆａｉｌｕｒｅｓ.Ｉｎｔｈｅｓｏ＿ｃａｌｌｅｄ“ｒｅｖｅｒｓｅｐｌｕｇｇｉｎｇｅｆｆｅｃｔ” …