Determination of thorium with DBF-arsenaz by flow-injection analysis

A sensitive,selective,rapid,simple,and convenient method for the determination of thoriumwas developed.The method was based on the color reaction of thorium with DBF-arsenazo in astrong acidic medium (4 mol/L HCI).The flow-injection technique was used with an automated flow-injection analyzer.Beer's law was obeyed in the range of 0—1.4 μg/mL.The relative standarddeviations were less than 1%.     

A Study on the Interaction of the DAS-K with Bovine Serum Albumin by On-line Ultrafiltration and Chemiluminescence

Potassium dehydroandrographolide succinate （DAS-K） has antibacterial and antiviral effects. It has been used widely for the treatment of virus pneumonia, malaria and respiratory infections. In this work, a novel flow-injection chemiluminescence （CL） method for the determination of DAS-K was proposed. The method is based on the reaction between DAS-K and hexacyanoferrate（III） in alkaline solution to give weak CL signal, which is enhanced by rhodamine B. The experimental conditions for the CL reaction were optimized and the possible reaction mechanism was discussed. Under the optimum conditions, the concentration of DAS-K is proportional to the CL intensity in the range of 0.1-80 μmol·L^-1 with a detection limit of 0.05 μmol·L^-1. The interaction of the DAS-K with bovine serum albumin by on-line ultrafiltration and flow-injection chemiluminescence was studied. The concentrations of unbound DAS-K from ultra filter tube were determined by the flow-injection CL method. The binding parameters were estimated by the Scatchard plot and Klotz plot. The proposed system proved that FIA-CL coupled with on-line ultrafiltration sampling was a fast and simple technique for the study of drug-protein interaction.     

Investigations on the Chemiluminescence Reaction Between Luminol and Reductant

The chemiluminescence reaction between luminol and reductant was investigated by a flow-injection system. The results show that this reaction can be used for the determination of the reductant which is active to chemiluminescence in alkaline lumminol, and of the substance which can, in appropriate manner, be converted into the active reductant. The mechanism of the chemiluminescence reaction may be that the reductant reduces dissolved oxygen to O2 , then O2 reacts with alkaline luminol to generate chemiluminescence.     

Catalytic Oxidation of NO over La_(0.8)Sr_(0.2)MnO_3 Perovskite

Catalytic oxidation of NO by O2 over La0.8Sr0.2MnO3 was tested in a tubular reactor.The reaction temperature ranged from 373 to 473 K,space time from 0.090 to 0.720 s,inlet NO concentration from 300 to 2000μL/L, and O2 volume fraction from 3%to 9%.The steady-state conversion of NO was increased significantly with increasing reaction temperature and the space time,slightly with increasing the O2 concentration but decreased with increasing the inlet NO concentration at a lower temperature.Under the conditions of 0.720 s space time,500μL/L NO concentration, 5%O2 volume fraction and 473 K,NO conversion reached 90%.A kinetic model including a network of 12 elementary reactions with the desorption of NO2 as the rate-limiting step is established and fits the experimental data well.The activation energy of NO2 desorption from the catalyst surface is determined to be 101 kJ/mol.     

Effect of dispersion and distribution of tungsten on W/HZSM-5 for selective catalytic reduction of NO by acetylene

Catalytic performance of W/HZSM-5 in selective catalytic reduction of NO by acetylene was investigated in a reaction system with 1600 ppm of NO, 800 ppm of C2H2, and 9.95% of O2 in He. It was found that promotional effect of tungsten on the reaction is strongly affected by catalyst preparation conditions and Si/Al ratio of the parent zeolite. A better dispersion of tungsten on HZSM-5 and relatively more monomeric tungsten species were found on 8%W/HZSM-5 prepared by impregnation of the zeolite with lower SiO2/A1203 ratio （25） in ammonic ammonium tungstate solution and calcination of the resulting material at higher temperature （550 ℃）. The highest NO conversion to N2 of 86.3% in the reaction system was obtained at 350 ℃ over the catalyst thus prepared. The mechanism of monomeric tungsten species improving the C2H2-SCR can be attributed to accelerating the formation of active nitrate species.     

Effect of montmorillonite on kinetics of polyurethane preparation reaction

The prepolymerization and curing reaction kinetics of polyurethane/montmorillonite have been studied with end group analysis and FTIR respectively. It was found that the prepolymerization and curing reaction followed the 2nd-order kinetics. But the activation energy of prepolymerization increased from 42.7 kJ/mol to 56.5 kJ/rnol after the montmorillonite was added in the reaction system, and activation energy of curing reaction decreased from 64.4 kJ/mol to 17.5 kJ/mol. 2007 Bing Liao. Published by Elsevier B.V. on behalf of Chinese Chemical Society. All rights reserved.     

Protease-catalyzed Synthesis of Bz-Arg-Gly-Asp-OMe in Full Aqueous Medium

Synthesis of N-benzoyl-argininylglycylasparagine methyl ester(Bz-Arg-Gly-Asp-OMe),a precursor tripeptide of Arg-Gly-Asp)was catalyzed by papain under kinetic control,at alkaline pH,in a full aqueous medium.The substrates were N-benzoyl-argininylglycine ethyl ester and asparagine dimethyl ester.An aqueous solution of 0.1 mol/L KCl/NaOH containing 8 mmol/L EDTA and 2 mmol/L DTT was selected as the reaction medium.The synthesized hydrophilic tripeptide was soluble in the reaction medium during the reaction process,however,the secondary hydro-lysis of the tripeptide product was not considerable.The effects of different factors,including water content,temperature,reaction time,and molar ratio of the substrates,on the yield of Bz-Arg-Gly-Asp-OMe were examined.The optimal reaction conditions were 0.05 mol/L Bz-Arg-Gly-OEt and 0.15 mol/L Asp(-OMe)2·HCl in 0.1 mol/L KCl/NaOH solution(pH 8.5),at 40 ℃,and a reaction time of 60 min,with a maximum conversion yield of 62.4%.     

Determination of Melatonin in Rat Pineal Gland and Drug with Flow-Injection Chemiluminescence

A flow-injection chemiluminescence （CL） method for the determination of melatonin based on the CL reaction of melatonin with hydrogen peroxide and sodium hypochlorite （NaOCl） in a basic alkaline solution was developed. The possible CL mechanism has been discussed, and a proposal for the reaction pathway was given that singlet oxygen was clarified to be produced in this reaction system and was responsible for the CL emission. Under the optimized conditions, the linear concentration range of application was 1.0×10^-7-2.5 × 10^-4 moloL-I with a de- tection limit of 5.0 ×10^-8 moloL-1 （S/N= 3）. The relative standard deviation for eight repeated measurements of 1.0×10^-6 mol·L^-1 melatonin was 2.8%. The interferences of several important biological substances, some indole compound, cations and anions were studied. No interference was found for the anions, glucose, starch, most of cations and low concentration （less than 3.0 × 10^-6 mol·L^-1） of some biological substances and indole compound. The method was applied to the determination of melatonin in rat pineal gland and drug with satisfactory results. The sample throughput was 90 injections per hour.     

Synthesis of Ethyl Oleate Catalyzed by Solid Superacid SO4^2-/TiO2/La3＋

Rare-earth compound solid superacid SO42-/TiO2/La3+ was prepared. Its catalytic activity was examined under different synthetic conditions for the esterification of propanoic acid and n-butyl alcohol as probing reaction. The optimum conditions were also found, which were the pH=8, the depositing time was 24 h, the mass fraction of La(NO3)3 used in solid superacid was 5%, the concentration of H2SO4 was 1.25 mol/L, the soaking time in H2SO4 was 16 h and the calcining temperature was 500 °C. The ethyl oleate was synthesized from oleic acid and ethanol in the presence of SO42-/TiO2/La3+. The optimum reaction conditions were obtained which were the reaction time was 6 h, molar ratio of oleic acid to ethanol was 1:4 and the mass fraction of catalyst was 4%.     

Kinetics and Mechanism of Exothermic First-stage Decomposition Reaction of 2,6-Bis （2,2,2-trinitroethyl）glycoluril

The thermal behavior, mechanism and kinetic parameters of the exothermic first-stage decomposition of the title compound in a temperature-programmed mode were investigated by means of DSC, TG-DTG and IR. The reaction mechanism was proposed. The kinetic model function in differential form, apparent activation energy(Ea) and pre-exponential factor(A) of this reaction are (3/2)(1-a)[-ln(1-a)]1/3, 185.52 kJ/mol and 1017.78 s-1, respectively. The critical temperature of the thermal explosion of the compound is 201.30 ℃. The values of ΔS≠, ΔH≠ and ΔG≠ of this reaction are 72.46 J/(mol · K), 175.1 kJ/mol and 141.50 kJ/mol, respectively.     

液相微萃取-离子色谱法测定污水中痕量芳香胺

基于中空纤维液相微萃取技术,建立了河流污水中两种芳香胺类物质（邻甲苯胺和对氯苯胺）的离子色谱分析方法。采用中空纤维液相微萃取和离子色谱联用技术,对中空纤维萃取条件进行优化。优化的萃取条件：萃取溶剂为正辛醇,供体相中NaOH的浓度为0.01mol/L, NaCl的浓度为500g/L,接受相中HCl的浓度为0.1 mol/L,搅拌速度为430r/min,萃取时间为30min,在优化条件下,邻甲苯胺的富集倍数为88倍,对氯苯胺的富集倍数为124倍。供体相中邻甲苯胺和对氯苯胺的浓度在0.005–0.1mg/L范围内成良好线性,相关系数为0.9998-0.9999 ,检出限为0.2-0.5μg /L,相对标准偏差为0.85-3.38 %。结论：这种方法操作简单,环境友好,提高了离子色谱检测芳香胺类物质的灵敏度。     

KBrO3-KBr紫外分光光度法测定痕量苯酚

研究了在盐酸介质中以 KBrO3-KBr 紫外分光光度法测定痕量苯酚的条件,在浓度为 0.6mol/L HCl,3×10-5mol/L KBrO3,5×10-4mol/L KBr,6×10-4mol/L KI 溶液中测定苯酚时,线性范围为 0.10～2.5mg/L,表观摩尔吸光系数为 1.89×104L·mol-1·cm-1,Sandell 指数为 4.98μg/cm2.本法已用于测定废水中苯酚.     

纳米SiO_2分离富集-火焰原子吸收法测定水中痕量银

研究了纳米SiO_2分离富集-火焰原子吸收法测定水中痕量银的新方法.考察了溶液pH、吸附时间、洗脱条件和干扰离子等因素对Ag~+分离富集的影响,确定了纳米SiO_2对Ag~+吸附的最佳条件.结果表明:在pH 4.1时,纳米SiO_2能定量吸附银,吸附在纳米SiO_2上的Ag~+可用0.5 mol/L HCl+0.5 mol/L硫脲定量洗脱.该法对银的检出限为0.77 ng/mL(3σ,n=11);线性范围为0.005～1.5μg/mL,对0.5μg/mL的Ag~+标液进行7次测定,RSD为3.6%,回收率在94.0%～101.5%之间;方法可用于环境水样中痕量银的测定.     

Flow-injection chemiluminescence determination of chlorinated isocyanuric acids

A rapid and sensitive flow-injection chemiluminescence method is described for the determination of dichloro- and trichloroisocyanuric acids based on the chemiluminescence produced during their reaction with luminol in alkaline medium. The effects of analytical and flow-injection variables on these chemiluminescence systems and determination of both oxidants are discussed. The optimized method yielded 3sigma detection limits of 8x10(-8) and 5x10(-8) mol L(-1) for the sodium dichloroisocyanurate and trichloroisocyanuric acid, respectively. The optimum conditions were found to be as follows: NaOH, 1x10(-1) mol L(-1); luminol, 5x10(-3) mol L(-1); KI, 2x10(-3) mol L(-1) and flow rate, 3.5 mL min(-1).     

Determination of Trace Tin by Anodic Stripping Voltammetry at a Carbon Paste Electrode

A sensitive and selective procedure for the determination of trace tin at a carbon paste electrode was described. Each measurement cycle consisted of three steps: accumulation, reduction and stripping. The tin complex with bromopyrogallol red (BPR) was accumulated on the electrode surface in 0.10 mol/L acetate buffer (pH 4.5). After electrochemical reduction of Sn(II) had been carried out, the reoxidation wave of Sn(0) appeared at ?0.69 V (vs. SCE) on scanning the potential in the positive direction in 4.0 mol/L HCl. For a preconcentration time of 2 min, the detection limit was 0.06 μg/L (5×10^?10 mol/L ) and the linear range was from 0.1 to 50 μg/L. The proposed method was applied to the determination of tin in canned food and waste water samples with satisfactory results.     

三相中空纤维膜液相微萃取-高效液相色谱法测定水中痕量双酚A

建立了三相中空纤维膜液相微萃取-高效液相色谱(HF-LPME-HPLC)方法,用于分析测定水中痕量双酚A的含量.设计了三相中空纤维膜液相微萃取系统,优化的HP-LPME最佳萃取条件为:萃取剂为正辛醇,接受相NaOH浓度为0.09 mol/L,样品溶液pH=4.0,NaC1加入量为30 g/L,搅拌速度为900 r/min,萃取时间为60 min.萃取后取20 μL接受相进行色谱分析.在最佳萃取条件下,方法的线性范围为0.5～200 μg/L(r＞ 0.999),检出限(信噪比为3)为0.2 μg/L;富集因子为241;方法RSD＜3.2％ (n=3).在实际环境水样中添加5,20和50μg/L的双酚A标准物质,加标平均回收率为92.8％～101.9％.表明本方法可用于水中痕量双酚A的快速准确测定.     

KBrO3—KBr紫外分光光度法测定痕量水杨酸

研究了ＨＣｌ溶液中ＫＢｒＯ３－ＫＢｒ紫外分光光度法测定水杨酸的条件,建立了测定痕量水杨酸的新方法。结果表明,在０．６ｍｏｌ／ＬＨＣｌ,３＊１０＾－５ｍｏｌ／ＬＫＢｒＯ３,５＊１０＾－４ｍｏｌ／ＬＫＢｒ,６＊１０＾－４ｍｏｌ／ｌＫＩ溶中测定水杨酸,其线性范围为０．２－４．０ｍｇ／Ｌ,表观摩尔吸光系数为１．９＊１０＾－４Ｌ．ｍｏｌ＾－１．ｃｍ＾－１,Ｓａｎｄｅｌｌ为７．３μｇ／ｃｍ＾２。ｓｇ ｉｆ ｅ     

KBrO3氧化甲基紫褪色动力学光度法测定食品中痕量钒

基于0.004 mol/L的柠檬酸介质中,痕量V(Ⅴ)催化KBrO3氧化甲基紫的褪色反应,建立了测定痕量V(Ⅴ)的动力学光度法。方法的检出限为1.23μg/L,线性范围为0～0.16μg/mL。讨论了酸度、反应物浓度、温度、反应时间、干扰离子等因素的影响,确定了该体系反应的最佳条件。在25 mL溶液中,测定2.0μg V(Ⅴ)的RSD为1.9%(n=11)。方法可用于测定小麦和苹果中的痕量V(Ⅴ),RSD为1.1%～2.7%,标准加入回收率为97.6%～99.0%。     

高碘酸钾氧化中性红褪色催化动力学光度法测定痕量硒(Ⅳ)

基于3.2×10-4mol/LH2SO4介质中,痕量硒(Ⅳ)催化KIO4氧化中性红的褪色反应,建立了测定痕量硒(Ⅳ)的动力学光度法。在固定加热时间段(6min)后,于530nm处测定中性红的吸光度降低值监控反应速率。方法检出限为0.36μg/L,校准曲线的质量浓度线性范围为0～8.0μg/L。实验了酸度、反应物浓度、温度、反应时间、干扰离子等因素的影响。研究了反应的最佳条件,并测定了一些动力学参数,催化反应的表观活化能为81.60kJ/mol。11次重复测定0.1μg/25mL和0.2μg/25mLSe(Ⅳ)的相对标准偏差分别为2.1%和1.9%。方法用于食品和人发样品中痕量硒(Ⅳ)的测定,相对标准偏差为0.33%～3.8%,加标回收率为96.0%～103.0%。