Mechanistic aspects of the solid-state transformation of ammonium cyanate to urea at high pressure

The chemical transformation of ammonium cyanate into urea has been of interest to many generations of scientists since its discovery by Friedrich W?hler in 1828. Although widely studied both experimentally and theoretically, several mechanistic aspects of this reaction remain to be understood. In this paper, we apply computational methods to investigate the behavior of ammonium cyanate in the solid state under high pressure, employing a theoretical approach based on the self-consistent-charges density-functional tight-binding method (SCC-DFTB). The ammonium cyanate crystal structure was relaxed under external pressure ranging from 0 to 700 GPa, leading to the identification of five structural phases. Significantly, the phase at highest pressure (above 535 GPa) corresponds to the formation of urea molecules. At ca. 25 GPa, there is a phase transition of ammonium cyanate (from tetragonal P4/nmm to monoclinic P21/m) involving a rearrangement of the ammonium cyanate molecules. This transformation is critical for the subsequent transformation to urea. The crystalline phase of urea obtained above 535 GPa also has P21/m symmetry (Z = 2). This polymorph of urea has never been reported previously. Comparisons to the known (tetragonal) polymorph of urea found experimentally at ambient pressure suggests that the new polymorph is more stable above ca. 8 GPa. Our computational studies show that the transformation of ammonium cyanate into urea is strongly exothermic (enthalpy change -170 kJ mol-1 per formula unit between 530 and 535 GPa). The proposed mechanism for this transformation involves the transfer of two hydrogen atoms of the ammonium cation toward nitrogen atoms of neighboring cyanate anions, and the remaining NH2 group creates a C-NH2 bond with the cyanate unit.     

Pressure-induced phase transitions on a liquid crystalline europium(III) complex

The effect of pressure on the phase behavior of the liquid crystalline complex [Eu(bta)(3)L(2)] (bta is benzoyltrifluoroacetonate, and L is the Schiff base 2-hydroxy-N-octadecyl-4-tetradecyloxybenzaldimine) was studied by X-ray diffraction, Raman spectroscopy, and luminescence spectroscopy. The pressure was varied between ambient pressure and 8.0 GPa. [Eu(bta)(3)L(2)] exhibits a smectic A (SmA) phase at room temperature. The complex undergoes a transition from the SmA phase to a solid lamellar structure around 0.22 GPa and another transition from the solid lamellar phase to an amorphous state from 1.6 to 3.5 GPa. At low pressures, the smectic layer spacing increases, and the intermolecular distance decreases. Above 3.5 GPa, both the interlamellar and the intermolecular spacings hardly change, but the intensity of X-ray reflections exhibits a remarkable decrease and eventually vanishes. An interpretation of the changes in the molecular structure is given. It was found that less interdigitation of the alkyl chains situated in adjacent layers and/or a full extension of the alkyl chains occurred at low pressures and that the second phase transition was accompanied by a transfer of the hydrogen atom from the nitrogen atom of the imine group to the oxygen atom of the Schiff base ligand. The effect of applying pressure equals that of the lanthanide contraction on the phase behavior.     

Polymerization of nitrogen in sodium azide

The high-pressure behavior of nitrogen in NaN(3) was studied to 160 GPa at 120-3300 K using Raman spectroscopy, electrical conductivity, laser heating, and shear deformation methods. Nitrogen in sodium azide is in a molecularlike form; azide ions N(3-) are straight chains of three atoms linked with covalent bonds and weakly interact with each other. By application of high pressures we strongly increased interaction between ions. We found that at pressures above 19 GPa a new phase appeared, indicating a strong coupling between the azide ions. Another transformation occurs at about 50 GPa, accompanied by the appearance of new Raman peaks and a darkening of the sample. With increasing pressure, the sample becomes completely opaque above 120 GPa, and the azide molecular vibron disappears, evidencing completion of the transformation to a nonmolecular nitrogen state with amorphouslike structure which crystallizes after laser heating up to 3300 K. Laser heating and the application of shear stress accelerates the transformation and causes the transformations to occur at lower pressures. These changes can be interpreted in terms of a transformation of the azide ions to larger nitrogen clusters and then polymeric nitrogen net. The polymeric forms can be preserved on decompression in the diamond anvil cell but transform back to the starting azide and other new phases under ambient conditions.     

Pressure-induced phase transitions in LiNH2

In situ high-pressure Raman spectroscopy studies on LiNH2 (lithium amide) have been performed at pressures up to 25 GPa. The pressure-induced changes in the Raman spectra of LiNH2 indicates a phase transition that begins at approximately 12 GPa is complete at approximately 14 GPa from ambient-pressure alpha-LiNH2 (tetragonal, I) to a high-pressure phase denoted here as beta-LiNH2. This phase transition is reversible upon decompression with the recovery of the alpha-LiNH2 phase at approximately 8 GPa. The N-H internal stretching modes (nu([NH2]-)) display an increase in frequency with pressure, and a new stretching mode corresponding to high-pressure beta-LiNH2 phase appears at approximately 12.5 GPa. Beyond approximately 14 GPa, the N-H stretching modes settle into two shouldered peaks at lower frequencies. The lattice modes show rich pressure dependence exhibiting multiple splitting and become well-resolved at pressures above approximately 14 GPa. This is indicative of orientational ordering [NH2]- ions in the lattice of the high-pressure beta-LiNH2 phase.     

New observations on the pressure dependence of luminescence from Eu2+-doped MF2 (M = Ca, Sr, Ba) fluorides

The luminescence from Eu(2+) ions in MF2 (M = Ca, Sr, Ba) fluorides has been investigated under the pressure range of 0-8 GPa. The emission band originating from the 4f(6)5d(1) --> 4f(7) transition of Eu(2+) ions in CaF2 and SrF2 shows the red-shift as increasing pressure with pressure coefficients of -17 meV/GPa for CaF2 and -18 meV/GPa for SrF2. At atmospheric pressure, the emission spectrum of BaF2:Eu(2+) comprises two peaks at 2.20 and 2.75 eV from the impurity trapped exciton (ITE) and the self-trapped exciton (STE), respectively. As the pressure is increased, both emission peaks shift to higher energies, and the shifting rate is slowed by the phase transition from the cubic to orthorhombic phase at 4 GPa. Due to the phase transition at 4-5 GPa pressure, the ITE emission disappears gradually, and the STE emission is gradually replaced by the 4f(6)5d(1) --> 4f(7) transition of Eu(2+). Above 5 GPa, the pressure behavior of the 4f(6)5d(1) --> 4f(7) transition of Eu(2+) in BaF2:Eu(2+) is the same as the normal emission of Eu(2+) in CaF2 and SrF2 phosphors.     

Lattice dynamics of single-bonded cubic nitrogen

The first principle calculations of the lattice dynamical properties of the single-bonded cubic nitrogen were performed using the density-functional perturbation theory together with plane-wave expansion and nonlocal pseudopotentials. The equilibrium structure of the single-bonded cubic nitrogen was first evaluated via the minimization of the total energy. Then, the harmonic phonon dispersion curves and the density of phonon states of the single-bonded cubic nitrogen have been evaluated within the linear-response framework. Furthermore, the heat capacity, enthalpy, free energy, entropy and velocity of sound of the single-bonded cubic nitrogen were calculated.     

The ternary system propyl propanoate+ hexane+chlorobenzene at 298.15 k

Differential thermal analysis shows many interesting properties that allow for prompt finding the place (p,T) and characteristics (endothermic, exothermic) of a phase transition or chemical reaction. In application to reactive sintering under active gas atmosphere at high pressure despite of numerous technical problems encountered during DTA measurements we found its unique possibilities. That allows for quantitative estimation of nitrogen involved in reaction of phase transition from the hexagonal phase to the cubic phase of MoN, and vice versa, in high gas pressure condition. DTA high gas pressure measurement system has the maximum operate temperature 2000°Cat pressure 2 GPa. This revised version was published online in August 2006 with corrections to the Cover Date.     

Pressure-induced crystal–amorphous transformation in Y2Mo3O12

In this work we investigate the vibrational properties of anhydrous and hydrated yttrium molybdate as a function of hydrostatic pressure. An analysis of vibrational modes suggests that the anhydrous material experiences a phase transformation from orthorhombic to a lower symmetry phase (probably monoclinic) about 0.3 GPa, and to a highly disordered phase above 2.4 GPa. The structural transformation to the high-pressure disordered phase is not reversible and suggests the onset of a pressure-induced amorphization process. The vibrational mode dependence on pressure is discussed considering lattice dynamics calculations.     

The reversible formation of a single-bonded (C(60)(-))(2) dimer in ionic charge transfer complex: Cp*(2)Cr.C(60)(C(6)H(4)Cl(2))(2). The molecular structure of (C(60)(-))(2)

A new ionic complex of C60 with decamethylchromocene, Cp*2Cr.C60(C6H4Cl2)2 (1), has been obtained. The fullerides are monomeric in 1 at room temperature, whereas they form a single-bonded (C60-)2 dimer at low temperatures, the structure of which has been studied by the X-ray diffraction on a single crystal at 100 K. The length of the intercage C-C bond is 1.597(7) A and the interfullerene distance is equal to 9.28 A. A phase transition attributed to the reversible C60*- dimerization is observed in the 220-200 K range. The transition is accompanied by changes in the unit cell parameters, the decrease of the magnetic moment from 4.20 muB (S = 3/2, 1/2) to 3.88 muB (S = 3/2) and the appearance of EPR signal from Cp*2Cr+, simultaneously.     

The ammonia-hydrogen system under pressure

Binary mixtures of hydrogen and ammonia were compressed in diamond anvil cells to 15 GPa at room temperature over a range of compositions. The phase behavior was characterized using optical microscopy, Raman spectroscopy, and synchrotron X-ray diffraction. Below 1.2 GPa we observed two-phase coexistence between liquid ammonia and fluid hydrogen phases with limited solubility of hydrogen within the ammonia-rich phase. Complete immiscibility was observed subsequent to the freezing of ammonia phase III at 1.2 GPa, although hydrogen may become metastably trapped within the disordered face-centered-cubic lattice upon rapid solidification. For all compositions studied, the phase III to phase IV transition of ammonia occurred at ~3.8 GPa and hydrogen solidified at ~5.5 GPa, transition pressures equivalent to those observed for the pure components. A P-x phase diagram for the NH(3)-H(2) system is proposed on the basis of these observations with implications for planetary ices, molecular compound formation, and possible hydrogen storage materials.     

High-pressure effects in pyrene crystals: vibrational spectroscopy

The response of pyrene crystals to high pressure was examined using Raman and FTIR spectroscopies. Raman spectra of external and internal modes were measured up to 11 GPa. Changes in the external modes were observed at approximately 0.3 GPa, indicating the onset of a phase transition. We demonstrated that at this pressure pyrene I (P2(1)/a, 4 mol/unit cell) transforms to pyrene III (P2(1)/a, 2 mol/unit cell). Further increase of pressure produced a gradual broadening of the internal modes and an increase of fluorescence background, indicating the formation of another phase above 2.0 GPa. Irreversible chemical changes were observed upon gradual compression to 40 GPa. FTIR spectroscopy of the recovered product indicated a transformation of pyrene into an amorphous hydrogenated carbon (a-C:H) structure.     

Room-temperature structures of solid hydrogen at high pressures

By employing first-principles metadynamics simulations, we explore the 300 K structures of solid hydrogen over the pressure range 150-300 GPa. At 200 GPa, we find the ambient-pressure disordered hexagonal close-packed (hcp) phase transited into an insulating partially ordered hcp phase (po-hcp), a mixture of ordered graphene-like H(2) layers and the other layers of weakly coupled, disordered H(2) molecules. Within this phase, hydrogen remains in paired states with creation of shorter intra-molecular bonds, which are responsible for the very high experimental Raman peak above 4000 cm(-1). At 275 GPa, our simulations predicted a transformation from po-hcp into the ordered molecular metallic Cmca phase (4 molecules∕cell) that was previously proposed to be stable only above 400 GPa. Gibbs free energy calculations at 300 K confirmed the energetic stabilities of the po-hcp and metallic Cmca phases over all known structures at 220-242 GPa and >242 GPa, respectively. Our simulations highlighted the major role played by temperature in tuning the phase stabilities and provided theoretical support for claimed metallization of solid hydrogen below 300 GPa at 300 K.     

Pressure-induced structural transition in n-pentane: a Raman study

Pressure-induced Raman spectroscopy studies on n-pentane have been carried out up to 17 GPa at ambient temperature. n-Pentane undergoes a liquid-solid transition around 3.0 GPa and a solid-solid transition around 12.3 GPa. The intensity ratio of the Raman modes related to all-trans conformation (1130 cm-1 and 2850 cm-1) to that of gauche conformation (1090 cm-1 and 2922 cm-1) suggests an increase in the gauche population conformers above 12.3 GPa. This is accompanied with broadening of Raman modes above 12.3 GPa. The high-pressure phase of n-pentane above 12.3 GPa is a disordered phase where the carbon chains are kinked. The pressure-induced order-disorder phase transition is different from the behavior of higher hydrocarbon like n-heptane.     

Amorphous polymerization of nitrogen in compressed cupric azide

Metal azides have attracted increasing attention as precursors for synthesizing polymeric nitrogen. In this article, we report the amorphous polymerization of nitrogen by compressing cupric azide. The ab initio molecular dynamics simulations show that crystalline cupric azide transforms into a disordered network composed of singly bonded nitrogen at a hydrostatic pressure of 40 GPa and room temperature. The transformation manifests the formation of a π delocalization along the disordered Cu-N network, thus resulting in a semiconductor–metal transition. The estimated heat of formation of the amorphous polymeric nitrogen system is comparable to conventional high-energy-density materials. The amorphization provides an alternative route to the polymerization of nitrogen under moderate conditions.     

Pressure-induced metastable phase transition in orthoenstatite (MgSiO3) at room temperature: a Raman spectroscopic study

Phase behavior of a synthetic orthoenstatite in a diamond-anvil cell has been studied up to ∼22 GPa by using Raman spectroscopy at room temperature. Under quasi-hydrostatic conditions, orthoenstatite undergoes a reversible phase transformation at an apparent transition pressure of ∼10 GPa for compression and ∼9.5 GPa for decompression. The 3d transition-metal cations, e.g., Fe²⁺ and Ni²⁺, show only a minor effect on the transition pressure within 10 wt% of addition. All the Raman frequencies in both orthoenstatite and its high-pressure phase increase monotonically with increasing pressure. The amount of forward or backward transition is fixed at a given pressure and forms a hysteresis loop in the transition %-pressure plan. The type for the present metastable phase transition is inferred to be of first order and the high-pressure polymorph may be the intermediate between orthoenstatite and the high-pressure clinoenstatite (i.e., the high-P C2/c phase). A mechanism based on Mnyukh's edgewise model of interface motion has been suggested to account for the observed phenomena.     

Compression of silver sulfide: X-ray diffraction measurements and total-energy calculations

Angle-dispersive X-ray diffraction measurements have been performed in acanthite, Ag(2)S, up to 18 GPa in order to investigate its high-pressure structural behavior. They have been complemented by ab initio electronic structure calculations. From our experimental data, we have determined that two different high-pressure phase transitions take place at 5 and 10.5 GPa. The first pressure-induced transition is from the initial anti-PbCl(2)-like monoclinic structure (space group P2(1)/n) to an orthorhombic Ag(2)Se-type structure (space group P2(1)2(1)2(1)). The compressibility of the lattice parameters and the equation of state of both phases have been determined. A second phase transition to a P2(1)/n phase has been found, which is a slight modification of the low-pressure structure (Co(2)Si-related structure). The initial monoclinic phase was fully recovered after decompression. Density functional and, in particular, GGA+U calculations present an overall good agreement with the experimental results in terms of the high-pressure sequence, cell parameters, and their evolution with pressure.     

Structural and chemical properties of the nitrogen-rich energetic material triaminoguanidinium 1-methyl-5-nitriminotetrazolate under pressure

The structural and chemical properties of the bi-molecular, hydrogen-bonded, nitrogen-rich energetic material triaminoguanidinium 1-methyl-5-nitriminotetrazolate C(3)H(12)N(12)O(2) (TAG-MNT) have been investigated at room pressure and under high pressure isothermal compression using powder x-ray diffraction and Raman and infrared spectroscopy. A stiffening of the equation of state and concomitant structural relaxation between 6 and 14 GPa are found to correlate with Raman mode disappearances, frequency discontinuities, and changes in the pressure dependence of modes. These observations manifest the occurrence of a reversible martensitic structural transformation to a new crystalline phase. The onset and vanishing of Fermi resonance in the nitrimine group correlate with the stiffening of the equation of state and phase transition, suggesting a possible connection between these phenomena. Beyond 15 GPa, pressure induces irreversible chemical reactions, culminating in the formation of a polymeric phase by 60 GPa.     

X‐Ray Diffraction and Mössbauer Spectroscopy Studies of Pressure‐Induced Phase Transitions in a Mixed‐Valence Trinuclear Iron Complex

The mixed‐valence complex Fe₃O(cyanoacetate)₆(H₂O)₃ ( 1 ) has been studied by single‐crystal X‐ray diffraction analysis at pressures up to 5.3(1) GPa and by (synchrotron) Mössbauer spectroscopy at pressures up to 8(1) GPa. Crystal structure refinements were possible up to 4.0(1) GPa. In this pressure range, 1 undergoes two pressure‐induced phase transitions. The first phase transition at around 3 GPa is isosymmetric and involves a 60° rotation of 50 % of the cyanoacetate ligands. The second phase transition at around 4 GPa reduces the symmetry from rhombohedral to triclinic. Mössbauer spectra show that the complex becomes partially valence‐trapped after the second phase transition. This sluggish pressure‐induced valence‐trapping is in contrast to the very abrupt valence‐trapping observed when compound 1 is cooled from 130 to 120 K at ambient pressure.     

高压下两种8-羟基喹啉络合物的发光行为和结构变化

测定了在高压条件下两种金属（钙和锌）的8 羟基喹啉络合物的晶体粉末样品的发光行为和原位X光衍射光谱.结果表明,压力对其发光性质产生极大的影响.随着压力的增加,8 羟基喹啉钙的发光强度在3 GPa以内时大大增加,随后发光强度快速下降,到7 GPa左右时几乎为零.而8 羟基喹啉锌的发光强度随压力的增加而逐渐降低,到7 GPa左右时约为常压的10％.高压下的原位X光衍射结果表明,8 羟基喹啉钙的晶体在3～4 GPa开始 发生非晶化相变,在7 GPa时该非晶化相变完成,样品的X光衍射完全消失.而8 羟基喹啉锌在压力的作用下（至16 GPa）没有发生明显的相变.     

High-pressure anisotropic distortion of Pb3Bi2S6: a pressure-induced, reversible phase transition with migration of chemical bonds

The compound Pb 3Bi 2S 6 is investigated by X-ray diffraction on single crystals in a diamond-anvil cell between 0.0001 and 10.5 GPa. It undergoes a first-order phase transition at hydrostatic pressure between 3.7 and 4.9 GPa. The space group symmetry changes from Bbmm to Pbnm, and the unit-cell volume decreases by 4%. The transition is strongly anisotropic, with a contraction along one of the crystal axes by 16% and expansion along another one by 14%. This is a piezoplastic phase transition, a displacive pressure-induced phase transition with systematic shearing of atomic planes and a migration of chemical bonds in the structure. In the case of Pb 3Bi 2S 6 the transition is achieved by the change of the archetypal architecture of the structure-building modules from a PbS-like to a SnS-like arrangement and a loss of mirror planes on the contact surfaces of modules. The phase transition is reversible with a preservation of the single crystal, which is a result of the stereochemical influence and migration of the s (2) lone electron pairs of Pb (II) and Bi (III).