Voltammetric determination of ethinylestradiol at a carbon paste electrode in the presence of cetyl pyridine bromine

Electrochemical behaviors of ethinylestradiol at a carbon paste electrode (CPE) in the presence of cetyl pyridine bromide (CPB) are investigated by electrochemical techniques. Compared with that at a CPE without CPB, the oxidation peak potential of ethinylestradiol shifts negatively and the peak current is increased significantly, due to the enhanced accumulation of ethinylestradiol via electrostatic interaction with CPB at the hydrophobic electrode surface. It is verified by the influences of different kinds of surfactants on the electrochemical signals of ethinylestradiol. Some parameters such as pH, scan rate, accumulation potential and accumulation time on the oxidation of ethinylestradiol are optimized. Under optimal conditions, the oxidation peak current is proportional to ethinylestradiol concentration in the range of 5.0 x 10(-8) to 2.0 x 10(-5) mol L(-1) with a detection limit of 3.0 x 10(-8) mol L(-1) for 150 s accumulation by linear sweep voltammetry (LSV). The proposed procedure is successfully applied to determine ethinylestradiol in pharmaceutical formulation (Levonorgestrel and Etinylestradiol tablets) and the results are satisfying compared with that of high-performance liquid chromatography (HPLC).     

Electrochemical behaviors of adrenaline at acetylene black electrode in the presence of sodium dodecyl sulfate

The electrochemical behaviors of adrenaline at the acetylene black electrode in the presence of sodium dodecyl sulfate (SDS) were investigated by cyclic voltammetry and electrochemical impedance spectroscopy (EIS). The results indicated that the electrochemical responses of adrenaline were apparently improved by SDS, due to the enhanced accumulation of protonated adrenaline via electrostatic interaction with negatively charged SDS at the hydrophobic electrode surface. This was verified by the influences of different kinds of surfactants on the electrochemical signals of adrenaline. The electrochemical parameters of the adrenaline oxidation were explored by chronocoulometry. Under optimal working conditions, the oxidation peak current at 0.57 V was proportional to adrenaline concentration in the range of 5.0x10(-8) to 7.0x10(-6) mol/L, with a low detection limit of 1.0x10(-8)mol/L for 70s accumulation by differential pulse voltammetry (DPV). This method was applied to determine adrenaline in the hydrochloride injection sample. The results are satisfying compared with that by the standardized method of high performance liquid chromatography (HPLC).     

Carbon paste electrode based on surface activation for trace adriamycin determination by a preconcentration and voltammetric method.

A voltammetric determination of adriamycin (ADM) at a carbon paste electrode (CPE) in the presence of cetyltrimethylammonium bromide (CTAB) is described. ADM strongly adsorbs on the surface of the electrode by the adsorption of CTAB, thereby affecting the reduction current. This method provides a detection limit below 10(-10) mol/L for ADM. The experimental parameters, which influence the voltammetric responses of ADM, e.g. the pH value, variety and concentration of surfactants and the scan rate, were optimized. The reduction peak current changes linearly with the ADM concentration over the range from 2.5 x 10(-8) mol/L to 5 x 10(-6) mol/L. The detection limit is 4 x 10(-10) mol/L for an accumulation time of 3 min. The coefficient of variation, determined at 4 x 10(-6) mol/L ADM, is 3.0% (n = 8). Using this method, ADM in the patient's urine samples, which undergoes active ADM chemotherapy, was determined.     

Cathodic adsorptive stripping square-wave voltammetric determination of nifedipine drug in bulk,pharmaceutical formulation and human serum

Nifedipine is a calcium-channel antagonist drug used in the management of angina pectoris and hypertension through inhibition of calcium influx. A fully validated sensitive cathodic adsorptive stripping square-wave voltammetry procedure was optimized for the determination of the drug at trace levels. The procedure was based on the reduction of the nitrophenyl group after the interfacial accumulation of the drug onto a hanging mercury drop electrode in Britton-Robinson buffer of pH 11.0. The optimal conditions of the procedure were found to be: accumulation potential=-0.9 V vs. Ag/AgCl/KCl(s)), accumulation time=30 s, scan increment=10 mV, pulse amplitude=50 mV and frequency=120 Hz. Under these conditions, a well-defined peak was obtained; its peak current showed a linear dependence on drug concentration in the range of 2x10(-9)-2x10(-7) mol L(-1) bulk nifedipine. The mean recoveries based on eight replicate measurements for 1x10(-8) and 5x10(-8) mol L(-1) bulk nifedipine solutions were 98.46+/-0.86% and 98.23+/-0.92%, respectively. A detection limit of 3.42x10(-10) mol L(-1) bulk nifedipine was achieved. The procedure was successfully applied for assay of the drug in tablets and spiked human serum with mean recoveries of 101.95+/-1.42% and 98.70+/-0.63%, respectively. The limit of detection of the drug in spiked human serum was found to be 3.90x10(-10) mol L(-1).     

Simultaneous electrochemical determination of xanthine and uric acid at a nanoparticle film electrode

A sensitive electrochemical method was developed for simultaneous determination of uric acid (UA) and xanthine (XA) at a glassy carbon electrode modified with multi-wall carbon nanotubes (MWNTs) film. The oxidation peak currents of UA and XA were increased at the MWNTs film electrode significantly. The experimental parameters, which influence the peak currents of UA and XA, such as the amount of MWNTs on the glassy carbon electrode, the pH of the solution, accumulation time, and scan rate, were optimized. Under optimum conditions, the peak currents were linear to the concentration of UA over the wide range from 1 x 10(-7) mol L(-1) to 1 x 10(-4) mol L(-1) and to that of XA over the wide range from 2 x 10(-8) mol L(-1) to 2 x 10(-5) mol L(-1). The interferences studies showed that the MWNTs-modified electrode exhibited excellent selectivity in the presence of ascorbic acid, dopamine, and hypoxanthine. The proposed procedure was successfully applied to detect UA and XA in human serum without any preliminary treatment.     

美洛昔康的单扫示波极谱法

在ＨＡｃ－ＮａＡｃ（ｐＨ４．７６）底液中,用单扫示波极谱法可以得到一个灵敏的美洛昔康二阶导数还原峰,其峰电位Ｅｎｐ＝－１．２８Ｖ（ｖｓ．ＳＣＥ）。峰电流与美洛昔康 度在９．０＊１０＾－８－６．０＊１０＾－６ｍｏｌ／Ｌ范围内呈线性关系（ｒ＝０．９９９４）检出限为３．０＊１０＾－８ｍｏｌ／Ｌ。该法应用于片剂中美洛昔康含量的测定,结果令人满意。     

2,4,6-tri(3,5-Dimethylpyrazoyl)-1,3,5-triazine modified carbon paste electrode for trace Cobalt(II) determination by differential pulse anodic stripping voltammetry

A differential pulse anodic stripping voltammetry was developed for the sensitive and selective determination of Co(II) at 2,4,6-tri(3,5-dimethylpyrazoyl)-1,3,5-triazine modified carbon paste electrode in 0.1 mol l(-1) NH(4)Cl solution (pH 4.95). The oxidation peak of Co(II) was observed at 0.03 V(vs. Ag/AgCl) by scanning the potential in a positive direction. The analysis procedure consisted of an open circuit accumulation step in stirred sample solution. This was followed by medium exchange to a clean solution and subsequently an anodic potential scan was effect to obtain the voltammetric peak. The current was proportional to the concentration of the Co(II) ion in a range of 1x10(-8)-1x10(-6) mol l(-1) for 3 min accumulation and in the range of 1x10(-9)-1x10(-8) mol l(-1) for 5 min accumulation; most of metal ions do not interfere with the determination. The developed method was applied to Co(II) determination in potable water.     

A multi-wall carbon nanotubes-dicetyl phosphate electrode for the determination of hypoxanthine in fish.

An enzymeless sensor based on a multi-walled carbon nanotubes-dicetyl phosphate (MWCNT-DCP) film modified vitreous carbon electrode was developed for the determination of hypoxanthine. The MWCNT-DCP film modified electrode showed a remarkable enhancement effect on the oxidation peak current of hypoxanthine. Under the optimized conditions, the oxidation peak current is proportional to the concentration of hypoxanthine over the range from 5.0 x 10(-7) to 2.0 x 10(-4) mol L(-1) with a detection limit (S/N = 3) of 2.0 x 10(-7) mol L(-1). The MWCNT-DCP film modified electrode has been successfully used to detect hypoxanthine in fish samples.     

Anodic stripping voltammetric determination of mercury by use of a sodium montmorillonite-modified carbon-paste electrode

A sodium montmorillonite (SWy-2)-modified carbon-paste electrode has been examined for determination of trace levels of mercury. Because of its strong cation-exchange and adsorptive characteristics, SWy-2 greatly improves the sensitivity of determination of Hg(2+). Hg(2+) is preconcentrated and reduced on the modified electrode surface at -0.40 V and then stripped from the electrode surface during the positive potential sweep. The conditions used for determination, e.g. supporting electrolyte, pH, amount of SWy-2, accumulation potential, and accumulation time, were optimized. The peak current was linearly dependent on the concentration of mercury from 1 x 10(-9) to 5 x 10(-7) mol L(-1). The detection limit (signal-to-noise ratio=3) was 1 x 10(-10) mol L(-1) after accumulation for 6 min. When the SWy-2-modified carbon-paste electrode was used to detect mercury in water samples the average recovery was 101.11%.     

A multiwall carbon nanotubes film-modified carbon fiber ultramicroelectrode for the determination of nitric oxide radical in liver mitochondria

A novel chemically modified electrode based on the multiwall carbon nanotubes (MWNTs) film-coated carbon fiber ultramicroelectrode (CFUE) has been described for the determination of nitric oxide radical (.NO). The electrochemical behaviors of MWNTs-modified CFUE have been characterized in 0.2 mmol L(-1) K(4)Fe(CN)(6) and 0.1 mol L(-1) KCl solution. The Nafion film was used to avoid some electroactive interferences. The amount of Nafion was optimized, and some possible interferents [such as nitrite (NO(2)(-)), nitrate (NO(3)(-)), ascorbate, dopamine (DA), l-arginine (l-Arg), etc.] were tested and evaluated. The oxidation peak current of .NO increases significantly at the MWNT/Nafion-modified CFUE, in contrast to that at the bare and the Nafion-modified CFUE, and the oxidation peak potential is at 0.78 V (vs. SCE), which can be used for the detection of .NO. The oxidation peak current is linearly with the concentration of .NO from 2x10(-7) to 8.6x10(-5) mol L(-1), and the detection limit is 2x10(-8) mol L(-1). The liver mitochondria in Carassius auratus were isolated and .NO release from mitochondria was monitored by using this ultramicroelectrode system.     

Simultaneous determination of 2-nitrophenol and 4-nitrophenol based on the multi-wall carbon nanotubes Nafion-modified electrode

In this work, multi-wall carbon nanotubes (MWNT) were conveniently dispersed into Nafion-ethanol solution, and the MWNT-Nafion-modified glassy carbon electrode (GCE) was described for the simultaneous determination of 2-nitrophenol and 4-nitrophenol. At pH 4.0 phosphate buffer, the reduction peak currents of 2-nitrophenol (at -0.8 V) and 4-nitrophenol (at -1.0 V) increase significantly at the MWNT-Nafion-modified GCE, in comparison with that at the Nafion-modified GCE and the bare GCE. The experimental parameters, such as solution pH of phosphate buffer, accumulation potential and time, and the amounts of MWNT-Nafion onto the GCE surface, were optimized. The reduction peak currents are linear with the concentration of 2-nitrophenol from 5 x 10(-8) to 1 x 10(-5) mol L(-1) and with that of 4-nitrophenol from 1 x 10(-7) to 1 x 10(-5) mol L(-1). The detection limits after 3-min accumulation are 1 x 10(-8) mol L(-1) for 2-nitrophenol and for 4 x 10(-8) mol L(-1) for 4-nitrophenol. This modified electrode was applied to direct determination of 2-nitrophenol and 4-nitrophenol in lake water samples.     

Voltammetric method based on an ion-pairing reaction for the determination of trace amount of iodide at carbon-paste electrodes.

Carbon-paste electrodes (CPEs) were studied to elucidate the cathodic stripping voltammetric determination of iodine. At an accumulation potential of 1.0 V (vs. SCE), iodide was preconcentrated on CPEs via an ion-pairing reaction, followed by oxidation to iodine. Then a linear scan voltammogram was recorded after 10 s of quiescent time by a cathodic potential scan from 0.7 V to 0.1 V at a scan rate of 100 mV s(-1). A cathodic peak current was obtained at about 0.38 V. Various experiment parameters such as the acidity, chloride concentration, accumulation potential, accumulation time, concentration of cetyltrimethylammonium bromide (CTAB) and scan rate, were optimized to analyze the iodide by employing linear-scan stripping voltammetry. Under the optimal conditions, calibration curves were obtained over a wide concentration range of the iodide ion from 8 x 10(-9) mol L(-1) to 5 x 10(-6) mol L(-1) with a detection limit of 2 x 10(-9) mol L(-1) at an accumulation time of 3 min. The effect of interfering species was evaluated and the procedure was applied to an iodide analysis in table salt, with good results.     

The effect of cetyltrimethyl ammonium bromide on the electrochemical determination of thyroxine

Electrochemical behavior of thyroxine at a polyvinylpyrrolidone modified carbon paste electrode in the presence of cetyltrimethyl ammonium bromide was described. Thyroxine underwent totally irreversible oxidation at this system and a well-defined peak at 0.42 V was obtained. The influence of various surfactants on the oxidation of thyroxine was examined by cyclic voltammetry. Chronocoulometry was also used to investigate the electrode process. In the range 2 x 10(-7) to 9 x 10(-6)mol/l, the thyroxine concentration was linear with the oxidation peak current and a low detection limit of 8 x 10(-8) mol/l was obtained for 5 min accumulation.     

碳糊电极阳极吸附伏安法测定环丙沙星

报道了用碳糊电极阳极吸附伏安法测定环丙沙星的新方法.在 0. 40mol/L的NH4Ac HAc(pH4. 30)缓冲液中,使用JP 303极谱分析仪,环丙沙星在碳糊电极 (CPE)上有一灵敏的吸附伏安氧化峰,峰电位为1. 12V(vs.SCE).该氧化峰的二阶导数峰电流与环丙沙星的浓度在 8. 0×10-9 ~8. 0×10-7 mol/L(富集 90s)范围内成良好的线性关系,相关系数为 0. 998 8,检出限为 4. 0×10-9 mol/L(S/N=3,富集 110s).探讨了环丙沙星在碳糊电极上的伏安性质和电极反应机理,并且成功应用于人体尿样中环丙沙星含量的测定.加入回收实验,回收率在95. 5%至 103. 9%之间.     

Determination of nicotinamide (NA) using its polarographic catalytic wave in the presence of KIO3

Nicotinamide (NA) yields a polarographic catalytic wave with a peak potential -1.38 V (vs. SCE) in 0.1 mol/L HAc-NaAc (pH 4.7)/4 x 10(-3) mol/L KIO3 buffer solution. The sensitivity of the catalytic wave increased in one order of magnitude as compared to that of the responding reduction wave without KIO3. Based on this observation, a new method for the determination of NA was recommended. The second order derivative peak current was proportional to the NA concentration in the range of 5 x 10(-8)- 6 x 10(-7) mol/L. 0.11-fold vitamin B1, 0.13-fold B2, 0.14-fold B6 and 8-fold nicotinic acid amounts do not interfere the determination of 1 x 10(-6) mol/L NA. The proposed method was used to determine the NA content in multivitamin tablets, with good agreement to the declared amount.     

秋水仙碱与牛血清白蛋白相互作用的电化学研究

以电化学方法对秋水仙碱与牛血清白蛋白的相互作用进行了研究。在0.3 mol/L H2SO4底液中,秋水仙碱在玻碳电极上产生一不可逆的氧化峰,峰电位为1.18 V(vs.SCE),加入表面活性剂四丁基氯化铵后,秋水仙碱的峰信号得到明显提高。在上述条件下,加入BSA后秋水仙碱的氧化峰电位正移,峰电流下降,峰电流下降值与BSA加入的浓度在1.5×10-7～2×10-6mol/L(r=0.9978)范围内有良好的线性关系,检出限达4.0×10-8mol/L。进一步探讨了秋水仙碱与BSA的结合数和结合常数,得到结合数为1,结合常数为2.40×105L/mol。     

多壁碳纳米管修饰玻碳电极测定乙炔雌二醇

多壁碳纳米管修饰玻碳电极测定乙炔雌二醇;多壁碳纳米管;乙炔雌二醇;化学修饰电极;电化学测定     

黄嘌呤在离子液体-纳米金-碳纳米管复合物修饰电极上的电化学行为

研究了黄嘌呤在离子液体-纳米金-碳纳米管修饰玻碳电极上的电化学行为。结果表明,在0.1mol/L磷酸盐(pH=4.4)介质中,修饰电极对黄嘌呤氧化具有强的电催化作用,黄嘌呤在0.9V(vs.SCE)左右产生一灵敏的氧化峰。在优化的实验条件下,用此峰测定黄嘌呤的线性范围为1.5×10-7～1.0×10-5mol/L,检出限为3.5×10-8mol/L。该修饰电极具有良好的重现性和稳定性。     

Voltammetric determination of tyrosine based on an L-serine polymer film electrode

A novel film electrode for the voltammetric determination of tyrosine has been constructed based on electropolymerization of L-serine on a glassy carbon electrode. Voltammetric behaviour of tyrosine on the poly-L-serine film electrode was investigated with cyclic voltammetry and linear sweep voltammetry, and electrochemical parameters were calculated from chronocoulometry. In optimal conditions, the oxidation peak current of tyrosine on the poly-L-serine film electrode was enhanced greatly. A sensitive oxidation peak at 0.90 V was employed to determine tyrosine. A linearity between the oxidation peak current and the tyrosine concentration was obtained in the range of 3.0 x 10(-7) to 1.0 x 10(-4) mol L(-1) with a detection limit of 1.0 x 10(-7)mol L(-1). The practical application of the film electrode in the determination of tyrosine in a commercial amino acid oral solution demonstrated that it has good selectivity and high sensitivity.     

水杨酸在改性钠基蒙脱土修饰电极上的电化学行为及测定

用十六烷基三甲基溴化铵(CTAB)对钠基蒙脱土进行改性,并用红外光谱、X衍射对CTAB-NaMMT进行表征,制备了改性钠基蒙脱土修饰电极(CTAB-NaMMT-CMC/GCE),研究了水杨酸在该修饰电极上的循环伏安行为.结果表明,在pH 0.8的H_2SO_4-Na_2SO_4电解质溶液中,SA在1.19 V出现一明显的氧化峰,在40 ～400 mV/s范围内,其氧化峰电流与扫描速率的平方根(v~(1/2))呈良好线性关系,表明电极过程为受扩散控制不可逆过程.测得SA在该修饰电极上的反应电子数、质子数、传递系数及扩散系数分别为2、2、0.389、1.275×10~(-6) cm~2/s.方波溶出伏安法的氧化峰电流(I_(pa))与SA浓度在8.0×10~(-7) ～1.25×10~(-4) mol/L范围内呈良好的线性关系(r=-0.999 6),检出限为2.27×10~(-7) mol/L,加标回收率为96% ～101%.