A mixed anionic lead(II) N-Oxide coordination polymer containing nitrato and benzoate ligands

The structures of two forms of a mixed anionic one-dimensional coordination polymers of lead(II) nitrate derived from benzoate and 2,2’-bipyridyl N-oxide are reported. The X-ray crystal structures show subtle differences in the two binding modes of nitrate in the coordination polymers obtained from two independent solvents. The solid state UV–Vis spectra show differences in the absorption pattern of the crystalline solids obtained from different solvents. The solid state UV–Vis spectra as well as the solution spectra are compared.     

Preparation and electrochemical study of manganese(II) macrocycles containing terpyridine

The macrocycle, L, prepared by template condensation of bis-6,6-(-methylhydrazino)-4-phenyl-2,2:6,2-terpyridine with glyoxal, forms a stable crystalline Mn^II complex, [Mn(L)(H₂O)₂][PF₆]₂, which has been used as a starting material for electrochemical studies on a series of seven coordinate Mn^II complexes [Mn(L)X₂]²⁺ (X = pyridine, 4-cyanopyridine, 4-aminopyridine, 4-dimethylaminopyridine, pyrazine, imidazole 1-methylimidazole, 2-dimethylimidazole or Ph₃P). Cyclic voltammetry of the complexes in MeCN shows a reversible one electron reduction wave in the range –1.32 to –1.42 V versus the Ag/AgBF₄ reference electrode.     

Kinetics study of selective removal of lead(II) in an aqueous solution containing lead(II), copper(II) and cadmium(II) across bulk liquid membrane

Transport of Pb(II) ion from equimolar aqueous solutions of Pb(II), Cu(II) and Cd(II) as well as from aqueous solutions containing only Pb(II) source phase (C_metal = 1.0 × 10^?4 mol L^?1) through bulk liquid membranes containing crown ether and oleic acid as carrier has been investigated. The initial fluxes of transported metal ions depend on the hydrophile–lipophile balance (HLB) and molar volumes (Vx) of crown ethers. The initial fluxes of Pb(II), Cu(II), and Cd(II) decrease with increase of HLB value for azacrown ether, i.e., tetraaza-14-crown-4 (A₄14C4), L1 > benzo-15-crown-5 (B15C5), L2 > 4′-Aminobenzo-15C5, L3 > nitrobenzo-15-crown-5 (NB15C5), L4. The selectivity of the metal ions showed the following separation factors (SF): SF_Pb–Cu = 2.15, SF_Cu–Cd = 2.10, SF_Pb–Cd = 4.52. The highest transport recovery for Pb(II) was observed for L1 (99.3 %).     

Tetracyanoquinodimethane complexes of nickel(II) with an N,O-donor macrocycle

A nickel(II) chelate, NiL¹Cl₂, has been obtained by reaction of nickel(II) chloride with a 15-membered N,O-donor macrocyclic ligand. Single-crystal X-ray studies reveal an octahedral environment around nickel(II). 7,7′,8,8′-Tetracyanoquinodimethane (tcnq) derivatives of the nickel(II) chelate were prepared by reaction with Litcnq and Et₃N(tcnq)₂. Spectroscopic measurements show the presence of only anionic tcnq in [NiL₁(tcnq)₂]·4H₂O and a mixture of non-coordinating anionic and neutral tcnq species in [NiL₁](tcnq)₄·H₂O.     

(p-Cymene)thioglycollatoruthenium(II) dimer; a complex with an ambi-basic S,O-donor ligand

The title compound was prepared from the (p-cymene)ruthenium chloride dimer and thioglycollic acid. The structure is a centrosymmetric dimer bridged by the soft-base S atoms, with the hard-base O atoms of the carboxylate group chelating to form a five-membered twisted-ring. The coordination of the ruthenium atoms is completed by a η⁶-p-cymene ligand, giving an 18-electron count. The Ru–S bonds are essentially equal at 2.396(1) Å.     

Synthesis of nickel(II) triazolenaphthalocyanine and related macrocycles.

The synthesis of novel monbenzotriazolephthalocyanines (3-6), low-symmetry phthalocyanine analogues, is described for the first time using a novel and simple stepwise strategy which involves the use of substituted naphthalodinitriles 8-11 and appropriately substituted three-unit compounds such as 7. Belonging to the same family, compound 1, which we have called triazolenaphthalocyanine, has been prepared by a statistical method from compound 2 and 3,5-diamino-1,2,4-triazole. Compound 1 shows a bathochromic shift of the Q-band in UV-vis spectrum due to the fusing of benzene rings to the triazolephthalocyanine core.     

Ceria nanoparticles deposited on graphene nanosheets for adsorption of copper(II) and lead(II) ions and of anionic species of arsenic and selenium

A nanocomposite prepared from graphene nanosheets and cerium nanoparticles (G/CeO₂) was applied to the extraction of Se(IV), As(V), As(III), Cu(II) and Pb(II). The structure of G/CeO₂ was investigated by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. The optimal pH values for extraction are 4.0 for As(V), 3.0 for Se(IV), and 6.0 for both Cu(II) and Pb(II). The maximum adsorption capacity of G/CeO₂ (expressed as mg·g^?1) were calculated by the Langmuir model and are found to be 8.4 for As(V), 14.1 for Se(IV), 50.0 for Cu(II) and 75.6 for Pb(II). The sorbent was applied to dispersive solid phase microextraction prior to direct quantitation by energy-dispersive X-ray fluorescence spectrometry without the need for prior elution. The limits of detection (in ng·mL^?1 units) are 0.10 for As(V), 0.11 for Se(IV), 0.19 for Cu(II) and 0.21 for Pb(II). The precisions (RSDs) are <4.5%. The accuracy of the method (1 - 4%) was verified by analysis of the certified reference material (CRM 1640a - natural water). The method was successfully applied in ultratrace element determination and to the speciation of selenium in environmental waters.

Open image in new window

Graphical abstract The method gives possibility of simultaneous preconcentration and determination in environmental waters of both anionic (As(V) and Se(IV)) and cationic (Cu(II) and Pb(II)) forms of selected metals using graphene nanosheets and cerium nanoparticles. Se(IV) can be selective determined in the presence of Se(VI).

     

Potentiometric carbon paste sensors for lead(II) based on dithiodibenzoic and mercaptobenzoic acids.

Dithiodibenzoic (DTB) acid and mercaptobenzoic (MB) acid were studied to characterize their abilities as modifier agents for lead(II) sensors. For both sensors, the best results were obtained with modified carbon paste electrodes with 24.1% of ligand. The pH influence on the potentiometric response was studied. The selectivity coefficients for both modified electrodes were tabulated. A potentiometric sensor based on DTB acid exhibited a more sensitive and selective response to lead ions than an MB electrode. The limits of detection for the DTB and MB electrodes were very similar, 5.01 x 10(-8) M and 3.98 x 10(-8) M, respectively, for lead(II) activity. The DTB sensor was applied to lead(II) ion determination in real samples and as an indicator electrode in potentiometric titrations. Natural and commercial humic acids were titrated using the DTB electrode to estimate the stability constant between these organic compounds and the lead(II) ions with successful results.     

Coulometric determination of lead(II) and lead(IV) in high-T c superconductors containing copper and bismuth

The behavior of Pb(II) and Pb(IV) was studied by voltammetry in supporting electrolytes containing 0.1 M NaOH or 0.1 M NaOH + 0.1 M Na₃Cit at a graphite and a mercury thin-film electrodes. The best conditions were found for the coulometric determination of Pb by the oxidation of Pb(0) to Pb(II) in the presence of 5- to 20-fold amounts of Bi(III) and Cu(II) within the range 0.2–2 mg Pb(II) with an error and a relative standard deviation of less than 0.5%. Along with the procedure proposed previously for the determination of Pb(II) and Pb(IV) present simultaneously using a platinum gauze electrode, this procedure was applied to the determination of Pb(II) and Pb(IV) in samples of high-T_c. Cu-Bi superconductors. For samples of high-T_c. Bi-Pb-A-Cu-0 superconductors (A = Ba or Sr-Ca) containing from 2 to 12% Pb(II), the relative standard deviation was less than 0.5%; for 0.6–7% Pb(IV), it was 1-0.2%.     

Association behavior of a nitrilotriacetic-acid-modified dye in a poly(vinyl alcohol) film containing Ni(II)-adsorbed gold nanoparticles.

The association behavior of the dyes 5(6)-carboxyfluorescein and nitrilotriacetic acid (NTA)-modified 5(6)-carboxyfluorescein (F-NTA) in a poly(vinyl alcohol) (PVA) film and in a PVA film containing metal nanoparticles is investigated. Well-dispersed gold nanoparticles (AuNps) and Ni(II)-adsorbed AuNps are formed in the PVA film using in situ photochemical fabrication method. 5(6)-carboxyfluorescein and F-NTA are doped into the films. The F-NTA forms an H-aggregate in the PVA film containing Ni(II)-adsorbed AuNps. It is suggested that the interaction between NTA and Ni(II) adsorbed on the AuNps promotes the formation of the H-aggregate.     

Novel palladium(II) complex containing a chelating anionic N-O ligand: efficient carbonylation catalyst

[reaction: see text] A novel palladium(II) complex containing chelating anionic pyridine-2-carboxylato and labile tosylato ligands is a highly efficient catalyst for the carbonylation of organic alcohols and olefins to carboxylic acids/esters. Carbonylation of primary, secondary, and tertiary alcohols as well as linear and functionalized terminal olefins was studied. In all cases remarkable activity and selectivity were observed. The catalyst is stable under reaction conditions even in the absence of excess phosphine ligands.     

Carboxylic solvents and O-donor ligand effects on CH activation by Pt(II)

We report on the design of more efficient C-H activation catalysts based on DFT calculations. The first examples of well-defined, N,O-donor ligated platinum complexes that are competent for fast C-H activation are detailed. These complexes exhibit thermal and protic stability and are efficient catalysts for H/D exchange reactions with benzene. The C-H activation is shown to benefit from design elements that (A) reduce the barrier for substrate coordination and (B) retain a low barrier for CH cleavage via a novel six-membered transition state involving the carboxylate group of the solvent.     

Copper(II) and lead(II) complexes based on 2,3,5,6-tetrakis(2-pyridyl)pyrazine as a polydentate ligand

The Cu(II) complexes [Cu(Tppz)(Dipic)] · 8H₂O (I) and [Pb₂(Tppz)Cl₄] _n (II), where Tppz, H2Dipic are 2,3,5,6-tetrakis(2-pyridyl)pyrazine, dipicolinic acid, respectively, have been synthesized and characterized by elemental analyses, IR, cyclic voltammetry, and electronic spectral studies. Solid state structures of both complexes have been determined by single crystal X-ray crystallography. An ORTEP drawing of two complexes shows that the coordination geometry around the metal center is a distorted octahedron. There are extensive conventional intermolecular O-H…O, N-H…O, and weaker C-H…O and C-H…Cl non-classical hydrogen bonds, which cause the stability of the crystal structure. Crystal data for I: monoclinic, space group: C2/c, a = 35.421(3), b = 8.422(6), c = 22.824(8) Å, β = 101.69(2)°, V = 6668(5) ų, Z = 8. Crystal data for II: triclinic, space group P \(\bar 1\) , a = 7.9534(4), b = 8.8682(5), c = 9.4245(5) Å, β = 95.086(2)°, V = 655.93(6) ų, Z = 2.     

Synthesis of colorimetric receptors for dicarboxylate anions: a unique color change for malonate

Three new chromogenic receptors (1, 2, and 3) containing p-nitrophenyl or p-nitronaphthyl or methyl groups appended to the thiourea groups were synthesized and characterized. Upon addition of a series of dicarboxylate anions to receptor 1 in DMSO, only the appearance of the solution of receptor 1 with malonate showed a color change from blue to yellow which can be detected by the naked eye at parts per million. With the addition of the series of dicarboxylate anions to receptor 2, the solutions showed an indistinct intense dark-red color. Whereas the addition of the same dicarboxylate anions to receptor 3, the solutions did not induce any color change. Thus, for the unique color change, the receptor 1 can act as an optical chemosensor for the malonate anion even in the presence of other dicarboxylate anions.     

Complexation kinetics of copper(II) and nickel(II) with macrocycles: identification of an outer-sphere chelate effect

Ligand-protonation constants and complexation kinetics of differently protonated forms of 10-methyl-1,4,8,12-tetraazacyclopentadecan-10-amine, 1,4,8,12-tetraazacyclopentadecane, and 1,4,8,12-tetraazacyclopentadecan-10-carboxylic acid with Cu(II) and Ni(II) in aqueous solution have been determined. These results are combined with a wide range of published complexation rate constants of partially protonated macrocyclic ligands with the same metal ions. Insight is gained into the electrostatic effects and the outer-sphere interaction of partially protonated ligands with aquated metal ions. An outer-sphere chelate effect has been ascertained.     

Nickel(II) and copper(II) complexes of aza macrocycles derived from trichloromethane

Syntheses of nickel(II) complexes of the tetraaza macrocycles 2,7-dichloro-1,3,6,8-tetraazacyclodecane (DCCD) and 2,8-dichloro-1,3,7,9-tetraazacyclododecane (DICD) and a copper(II) complex of 2,6,8,12,13,17-hexaazabicyclo[5.5.5]heptadecane (HBCH) are reported in the template condensation of trichloromethane with 1,2-diaminoethane or 1,3-diaminopropane. Formulation of the synthesized products [Ni(DCCD)(H₂O)₂]Cl₂, [Ni(DICD)(H₂O)₂]Cl₂?·?H₂O, and [Cu₃(HBCH)(H₂O)₆]Cl₆, and the metal-free ligand hydrochloride HBCH?·?6HCl has been confirmed by elemental analyses, conductivity measurements, and spectral studies. Potentiometric studies of nickel(II) and copper(II) complexes of HBCH and structurally similar 2,5,8,10,13,16,17,20,23-nonaazabicyclo[7.7.7]tricosane (NACT, earlier derived from trichloromethane and diethylenetriamine) have also been performed in the structural support of HBCH. In 1?:?1, metal?:?HBCH solution, copper(II) is coordinated to four N-donors of two-HN(CH₂)₃NH– groups of the ligand in a non-planar tetraaza cavity. The equilibrium constant value (log?K?=?15.41) for the reaction Cu^2+?+?A???CuA²⁺ (A?=?HBCH) is in favor of the cyclic structure of the ligand. A high value (log?K?=?23.27) for corresponding reaction in the NACT system is due to conformational change in the ligand, where copper(II) organizes the macrocycle to form a nearly planar cavity in which the cation fits well.     

Structure and properties of heterocomplex compounds based on lead(II) hexafluoroacetylacetonate and copper(II) β-diketonates

Single crystal X-ray diffraction study has been performed for heterometallic complexes based on lead(II) hexafluoroacetylacetonate and copper(II) β-diketonates. Crystal data for Cu(aa)₂·Pb(hfa)₂: a = 8.741(2) Å, b = 12.124(2) Å, c = 13.741(3) Å, α = 89.70(3)°, β = 89.50(3)°, γ = 75.06(3)°, space group P-1, Z = 2, d _calc = 2.084 g/cm³; for Cu(hfa)₂ Pb(hfa)₂: a = 9.334(2) Å, b = 14.584(3) Å, c = 23.102(5) Å, β = 96.82(3)°, space group P2₁/c, Z = 4, d _calc = 2.338 g/cm³. It is demonstrated that the principal structural motif for these compounds is a chain coordination polymer, which consists of alternating molecules of the complexes. The results of a thermogravimetric study for the compounds are reported.     

Fibre-optic potassium ion sensors based on a neutral ionophore and a novel lipophilic anionic dye

A novel lipophilic anionic dye, N-2,4-dinitro-6-octyloxyphenyl-2′,4′-dinitro-6′-trifluoromethylphenylamine (LAD), was synthesized. On deprotonation at neutral Ph it forms anions and brings about a change in the absorption spectrum in the visible region. This anionic dye was incorporated into a poly(vinyl chloride) matrix membrane with dibenzo-18-crown-6 (DB18C6) or valinomycin, which are K⁺-selective neutral ionophores. An optical K⁺ sensor was prepared using the polymeric membrane set 1 mm apart from the tip of a bifurcated optical fibre with a cylindrical plastic support. This sensor could detect a wide range of K⁺ concentrations (10^?6?1 M K⁺ for the DB18C6-based sensor, 10^?8?10^?2 M K⁺ for the valinomycin-based sensor) at Ph 7.0 by measuring the absorbance change at 513 nm. The factors that influence the response sensitivity of the sensor are discussed theoretically.     

Stereochemistry of lead(II) complexes containing sulfur and selenium donor atom ligands

The stereochemistry of lead(II) complexes with S- and Se-donor atom ligands, including mixed ligand complexes is reviewed with respect to the geometry of the first coordination sphere of the Pb(II) atom in these compounds and rationalized in terms of the valence shell electron-pair repulsion (VSEPR) model. The most comprehensively structurally characterized classes of lead(II) thio and seleno complexes are discussed, including monothio-, dithio(seleno)-, trithio- and tetrathio-complexes, as well as Pb(II) dialkyldithio(seleno)carbamates, alkylxanthates and dialkyl(aryl) phosphorodithio(seleno)lates. Data about the polyhedral shape of the primary coordination sphere, coordination number (CN), bond lengths (primary and secondary) and bond angles of the Pb(II) atom in the compounds under investigation are systematized in comprehensive tables. The particularities of the stereochemistry of Pb(II) complexes with S(Se)-donor atom ligands are comparatively discussed with the stereochemistry of lead(II) complexes with oxygen donor ligands.     

Nitrate-selective membrane electrode based on bis(2-hydroxyanil)acetylacetone lead(II) neutral carrier.

A nitrate-selective electrode based on a recently synthesized bis(2-hydroxyanil)acetylacetone lead(II) complex [(haacac)Pb] has been developed. Among different compositions studied, a membrane containing 30.7% poly(vinyl chloride) (PVC), 61.3% dibutyl phthalate (DBP) as a plasticizer, 3% methyltrioctylammonium chloride (MTOAC) as a cationic additive and 5% ionophore (all w/w) exhibited the best potentiometric response toward nitrate ion in aqueous solutions. The potentiometric response of the electrode was linear with a Nernstian slope of -58.8 mV decade(-1) within the NO3- concentration range of 2 x 10(-5)-1 x 10(-1) mol dm(-3). The response time of the electrode was < or =10 s over the entire linear concentration range of the calibration plot. The electrode is suitable for use within the pH range of 5.3-11. The selectivity coefficients for the proposed electrode were improved for some interferences, when compared with those of commercially available nitrate-selective electrodes.