Analysis of conjugated linoleic acids as 9-anthrylmethyl esters by reversed-phase high-performance liquid chromatography with fluorescence detection

A simple and highly sensitive method for determining the fatty acid composition of food lipids containing conjugated linoleic acid (CLA) is described. The method is based on the separation of the 9-anthrylmethyl ester derivatives of saturated and unsaturated (conjugated and non-conjugated) fatty acids by reversed-phase high-performance liquid chromatography with fluorescence detection. Just like the other fatty acids, CLA reacts readily with 9-anthryldiazomethane at room temperature to produce 9-anthrylmethyl esters without isomerization and decomposition of the conjugated double bonds. Clear resolution of the individual fatty acids as their 9-anthrylmethyl esters is achieved on a highly efficient octadecylsilylated silica column (150- x 3-mm i.d., 3-microm particle size) using a stepwise gradient elution with methanol-water. The method is standardized with commercially available CLA isomers (cis-9, trans-11 and trans-10, cis-12-octadecadienoic acids, and their cis,cis and trans,trans isomers) and applied for determination of the fatty acid compositions of milk and sdairy products.     

四甲基二硅桥连二（环己基环戊二烯基）四羰基二铁的合成、结构及热量排反应研究

1，2－二（环己基环戊二烯基）四甲基二硅烷与Fe(CO)_5在二甲苯中加热回流 生成二铁化合物(Me_2SiSiMe_2)[(c-C_6H_(11)-C_5H_3)Fe(CO)]_2(μ-CO)_2 （ 2）。通过柱层析分离到2的顺反两种异构体2c和2t，并分别进行热重排反应，发现 顺式底物2c重排生成反式重排产物[Me_2Si(c-C_6H_(11)C_5H_3)Fe(CO)_2]_2 （ 3t），而反式底物2t重排则生成顺式重排产物3c。这表明重排反应是立体专一性的 。通过X射线衍射分析测定了化合物2c和3t的晶体结构。     

苯并芘DNA加合物anti-BPDE-N^2-dG四种立体异构体的合成及色谱分离

体外合成了苯并芘DNA加合物-邻二醇环氧苯并芘-脱氧鸟苷加合物(anti-BPDE-N2-dG)四种立体异构体(两对手性异构体)。通过优化体外反应条件,anti-BPDE-N2-dG四种异构体的合成产量较现有合成方法提高了2倍多,为定量检测生物体中anti-BPDE-N2-dG提供了标准品。并首次将五氟苯基色谱柱应用于该立体异构体的色谱分离提纯,通过优化色谱条件,采用常规的五氟苯基色谱柱(250 mm×4.6 mm,5μm),以乙腈-0.1%甲酸水(22.5∶77.5)为流动相,流速1.2 mL/min条件下,45 min内即可分离提纯四种立体异构体。该方法与常规C18柱(250 mm×4.6 mm,5μm)需要160 min,苯基柱(250 mm×4.6 mm,5μm)需要85~100 min才能将四种立体异构体实现色谱分离相比,缩短了分离时间,提高了提纯效率。通过紫外吸收光谱、质谱、圆二色谱对四种立体异构体进行表征,确定出峰顺序为trans(-)、trans(+)、cis(+)、cis(-)-anti-BPDE-N2-dG。此外,利用高效液相色谱-串联质谱(HPLC-MS/MS)检测anti-BPDE-N2-dG四种立体异构体标准品时,使用常规的五氟苯基色谱柱可在30 min内完成分离检测,与相同规格的苯基柱需要60 min相比提高了检测效率。     

Separation of isomers of dienoic acids by electromigration techniques

Different capillary electromigration techniques were employed to resolve geometrical isomers of sorbic acid, decadienoic acid, and ethyl sorbate. Since these substances differ in their polarity, shape, and size, various electromigration approaches were investigated to separate the four geometrical isomers of each compound. With capillary electrophoresis (CE) modified with a cyclodextrin (β‐CD) the four isomers of sorbic acid were separated using a buffer that consists of 60 mM tetraborate and 8 mg/mL β‐CD. The separation of decadienoic acid geometrical isomers was not possible, even at elevated tetraborate and cyclodextrin concentrations. The four isomers of decadienoic acid were successfully separated using micellar electrokinetic chromatography (MEKC) with a buffer consisting of 30 mM tetraborate and 100 mM SDS and microemulsion electrokinetic chromatography (MEEKC). Ethyl sorbate is the least polar of all the studied substances and its isomers could not be separated by MEKC or MEEKC. The resolution was improved and isomers were fully separated using capillary electrochromatography (CEC) with ODS stationary phase and a mobile phase consisting of 10 mM boric acid in 50% acetonitrile. Minor differences in the polarity and the shape of isomers and high resolving power of the applied techniques were sufficient for separation of very similar compounds. We have shown that versatile electromigration techniques can be applied for separation of geometrical isomers of dienoic acids and their esters.     

Separation characteristics of fatty acid methyl esters using SLB-IL111, a new ionic liquid coated capillary gas chromatographic column

The ionic liquid SLB-IL111 column, available from Supelco Inc., is a novel fused capillary gas chromatography (GC) column capable of providing enhanced separations of fatty acid methyl esters (FAMEs) compared to the highly polar cyanopropyl siloxane columns currently recommended for the separation of cis- and trans isomers of fatty acids (FAs), and marketed as SP-2560 and CP-Sil 88. The SLB-IL111 column was operated isothermal at 168°C, with hydrogen as carrier gas at 1.0 mL/min, and the elution profile was characterized using authentic GC standards and synthetic mono-unsaturated fatty acids (MUFAs) and conjugated linoleic acid (CLA) isomers as test mixtures. The SLB-IL111 column provided an improved separation of cis- and trans-18:1 and cis/trans CLA isomers. This is the first direct GC separation of c9,t11- from t7,c9-CLA, and t15-18:1 from c9-18:1, both of which previously required complimentary techniques for their analysis using cyanopropyl siloxane columns. The SLB-IL111 column also provided partial resolution of t13/t14-18:1, c8- from c6/c7-18:1, and for several t,t-CLA isomer pairs. This column also provided elution profiles of the geometric and positional isomers of the 16:1, 20:1 and 18:3 FAMEs that were complementary to those obtained using the cyanopropyl siloxane columns. However, on the SLB-IL111 column the saturated FAs eluted between the cis- and trans MUFAs unlike cyanopropyl siloxane columns that gave a clear separation of most saturated FAs. These differences in elution pattern can be exploited to obtain a more complete analysis of complex lipid mixtures present in ruminant fats.     

Improved identification of conjugated linoleic acid isomers using silver-ion HPLC separations

Silver-ion high-performance liquid chromatography (Ag+-HPLC) has been shown to be effective in the resolution of most of the isomers of conjugated octadecadienoic acids (18:2), also known as conjugated linoleic acid (CLA). The CLA isomers identified in natural fats from ruminants are a mixture of numerous positional and geometric isomers from 7,9- to 12,14-18:2. Ag+-HPLC separates both geometric (trans,trans < cis/trans < cis,cis) and positional CLA isomers using the mobile phase hexane/acetonitrile (99.9:0.1). The elution volumes for the CLA isomers were not only affected by the concentration of acetonitrile (in the prepared mobile phase) but also with successive runs during the day using a prepared mobile phase batch, due to the partial solubility of acetonitrile in hexane. However, this drift does not affect the relative resolution of the CLA isomers. The addition of diethyl ether to the mobile phase partly stabilizes the solvent mixture. In order to facilitate the interpretation of Ag-+HPLC chromatograms, the relative retention volumes (RRV) were calculated for each CLA isomer. Toluene was added to all the test portions and served as an estimator of dead volume, whereas the elution of the ubiquitous 9c,11t-CLA isomer was chosen as unity (1.00). Expressing the elution of all the CLA isomers as their RRV greatly helped to standardize each CLA isomer, resulting in relatively small coefficients of variation (% CV) for the trans,trans (<1.5%) and cis/trans (<0.5%) CLA isomers. The identification of the CLA isomers was further facilitated by synthesis of authentic CLA isomers. All the geometric CLA fatty acid methyl esters (FAME) from positions 6,8- to 13,15-CLA were commercially available or synthesized by a combination of partial hydrazine reduction of known polyunsaturated fatty acids followed by alkali isomerization, isolation of products, and further iodine-catalyzed geometric isomerization. Based on expressing the elution volume as RRV and the availability of the synthetic CLA isomers, a unique reversal of the elution order of the c/t CLA isomers was found. It is also proposed that the retention times of CLA isomers by gas chromatography (GC) should be expressed as their relative retention times (RRT) relative to methyl gamma-linoleneate. The availability of CLA reference materials and the application of RRV and RRT to Ag+-HPLC and GC separations, respectively, will greatly improve in the identifications of CLA isomers.     

Preparative separation of isomeric and stereoisomeric dicarboxylic acids by pH-zone-refining counter-current chromatography

This work involves the preparative separation of some isomeric dicarboxylic acids using pH-zone-refining counter-current chromatography (CCC), a relatively new preparative technique for the separation of ionizable compounds. The paper concentrates especially on the separation of a synthetic mixture of closely related cis and trans pairs of 1-methyl- and 1,3-dimethyl-1,3-cyclohexanedicarboxylic acids. The elution sequence of the isomers is discussed in terms of their relative acidities (pK(a) values) in solution and gas phase, hydrophobicities, and steric configuration. Two possible explanations are suggested for the mechanism of separation. They both involve the amount of retainer acid used, as it affects the separation and plays a role in the chemohydrodynamic equilibrium of the dicarboxylic acids in the column.     

Synthesis and separation of substituted cyclopropane carboxylic acid amide isomers

The phase-transfer-catalyzed cyclization of optically active malonic acid allylic ester amides yields bicyclic cyclopropane carboxamide lactone derivatives. The two diastereomers obtained could be separated in some cases by simple column chromatography yielding the pure isomers.     

Counter-current chromatographic estimation of hydrophobicity of Z-(cis) and E-(trans) enalapril and kinetics of cis/trans isomerization

The kinetics of Z-(cis)/E-(trans) isomerization of enalapril was investigated by reversed phase high-performance liquid chromatography (RP-HPLC) using a monolith ODS column under a series of different temperature and pH conditions. At a neutral pH 7, the rate (k(obs)) of Z-(cis)/E-(trans) isomerization of enalapril at 4 degrees C (9.4 x 10(-3)min(-1)) is much lower than at 23 degrees C (1.8 x 10(-1)min(-1)), while the fractional concentration of Z-(cis) isomer is always higher than that of E-(trans) isomer in the pH range 2-7. The fractional concentration of the E-(trans) isomer becomes a maximum (about 40%) in the pH range 3-6, where enalapril exists as a zwitterion. The hydrophobicity (logP(O/W)) of both isomers was estimated by high-speed counter-current chromatography (HSCCC). Normal phase HSCCC separation using a tert-butyl methyl ether-acetonitrile-20mM potassium phosphate buffer (pH 5) two-phase solvent system (2:2:3, v/v/v) at 4 degrees C was effective in partially separating the isomers, and the partition coefficient (K) of each isomer was directly calculated from the retention volume (V(R)). The logP(O/W) values of Z-(cis) and E-(trans) isomers were -0.46 and -0.65, respectively.     

Rapid, Direct Quantitation of the Preservatives Benzoic and Sorbic Acid (and Salts) Plus Caffeine in Foods and Aqueous Beverages Using Supercritical Fluid Chromatography

The preservatives benzoate and sorbate, plus caffeine were rapidly separated and quantified, in just over 2 min, in a wide range of beverages and foods, using supercritical fluid chromatography (SFC). Fifteen beverages and 10 semi-liquid foods were evaluated. The benzoate and sorbate were originally present in the samples as the acid, or the sodium, or potassium salt. The aqueous samples were diluted 3:1 with acidified methanol, to insure the acids were protonated, then directly injected. The solutes were isocratically eluted from a 4 × 250 mm, 5 μm Diol column with 3.5 mL min^?1 of 8.5 % methanol containing 0.3 % acetic acid at 50 °C and a column outlet pressure of 150 bar. The real samples exhibited remarkably little interference. All the beverages were accurately labeled. However, many of the foods, such as salad dressings, mustard, etc., were mislabeled. The method was linear over a wide range with correlation coefficients for all three solutes >0.999. RSD’s were generally less than 1 %. The results agreed with the caffeine content on the labels within a few percent. Surprisingly, this appears to be the first published separation of benzoic and sorbic acid preservatives in food, and beverages using SFC, and one of a very few SFC applications where aqueous samples were simply diluted and injected. Compared to published references, the SFC method was found to be up to 7 times faster than HPLC, and eliminated the use of acetonitrile.     

Spectroscopic Characterization of the Geminal Isomer of Lewisite

Abstract

Lewisite is generally a mixture of several components with the trans isomer of lewisite being the predominant compound. A geminal isomer has not been previously reported as one of the components of the mixture. In the lewisite samples we examined, the geminal isomer, dichloro(l-chlorovinyl)arsine, comprised 2.7 per cent of the total material compared to 95.2 and less than 1 per cent, respectively, for the trans and cis isomers. The remaining fraction was not identified. The geminal isomer of lewisite has been characterized along with the trans and cis isomers using several spectroscopic techniques. Proton NMR of the geminal isomer produced a coupling constant consistent with vinylic protons in a geminal configuration. Mass spectrometry and infrared spectroscopy characterizations were based on an ethanedithiol derivative of the lewisite isomers with gas chromatography used to first separate the derivatized isomers. The electron ionization massspectra of the trans and cis derivatives were very similar, but significant differences were observed in the mass spectrum of the geminal form. Infrared absorption spectra were obtained for the trans and geminal derivatives with significant differences observed between the two, but the method was not sensitive enough to detect the cis isomer.

     

Procedure for determination of trace ions in boric acid by matrix volatilization-ion chromatography

A method for determination of anions and cations in boric acid is proposed by matrix volatilization. The boric acid matrix was eliminated as trimethyl borate ester in a vapour phase matrix elimination (VPME) system using a mixture of glycerol-methanol. In this VPME system, in situ reagent purification, sample decomposition and digest evaporation were achieved in a single step. Trace anions were separated on anion-exchange column (IonPac AS17) by an isocratic elution with 15 mM sodium hydroxide and the cations on a cation-exchange column (IonPac CS12) by 20 mM hydrochloric acid as eluents. Method detection limits (3sigma) for most ions ranged from 0.3 to 8 ng/g (ppb). Recovery experiments combined with comparison of data obtained by other methods were employed to verify the accuracy of the proposed method. Application of the method to determine trace levels of anions like acetate, oxalate, sulfate, phosphate and cations such as lithium, sodium, potassium, magnesium and calcium in two highly pure grades of boric acid using ion chromatography is demonstrated.     

Optimization of the selectivity of a cyanopropyl stationary phase for the gas chromatographic analysis of trans fatty acids

The quantification of monounsaturated and polyunsaturated trans fatty acids in partially hydrogenated fats by gas-liquid chromatography on a CP-Select CB-FAME capillary column was optimized using equivalent chain length values of fatty acids methyl esters that could coelute in the temperature range from 155 to 200 degrees C. The most appropriate temperature for the simultaneous determination of these trans isomers is around 197 degrees C. It is proposed a system to discriminate trans from cis octadecenoic fatty acid methyl esters based on the angular coefficient values of the equivalent chain length curves. The limits of detection and quantification were 0.28 and 0.93 mg g(-1). Quantification was performed in the range from 0.93 to 280 mg g(-1). Quantification accuracy was estimated by spike recovery of elaidic and trans-13-octadecenoic acids in hydrogenated fat samples. The obtained levels were from 97.60 to 103.28% for elaidic acid and from 98.12 to 99.27% for trans-13-octadecenoic acid. These results indicate that the accuracy of the methodology proposed for the quantification of monounsaturated and polyunsaturated trans fatty acids in hydrogenated fats is adequate.     

Two methods for the separation of monounsaturated octadecenoic acid isomers

The identification and quantification of complex mixtures of cis and trans octadecenoic (18:1) fatty acid isomers presents a major challenge for conventional one-dimensional GC/FID analysis of their methyl esters. We have compared the use of two methods to achieve optimized separations of positional and geometrical octadecenoic fatty acid isomers—comprehensive two-dimensional gas chromatography (GC × GC), and silver ion high performance liquid chromatography interfaced to atmospheric pressure photoionization (APPI) mass spectrometry. Nine isomers of octadecenoic acid methyl ester were well separated on a single silver ion column with a mobile phase of 0.018% acetonitrile and 0.18% isopropanol in hexane. Reproducible retention times were obtained with relative standard deviations of around 1% over 5 injections. The extra selectivity and reproducibility afforded by APPI-MS, together with the wide separation of cis and trans isomers by silver ion chromatography, resulted in a promising method for measurement of octadecenoic acid FAME. The GC × GC separation was performed using various column combinations, and optimal separation was obtained by coupling an ionic liquid column (Supelco SLB-IL100 [1,9-di(3-vinyl-imidazolium) nonane bis(trifluoromethyl) sulfonyl imidate]) in the first dimension with a SGE BPX50 (50% phenyl polysilphenylene-siloxane) in the second dimension. These methods have been applied to the analysis of octadecenoic acid in milk and beef fat.     

用反相高效液相色谱法分离和测定丁烯二酸的顺反异构体

建立了分离和测定丁烯二酸的２个异构体－顺丁烯二酸和反丁烯二酸的反相高效液相色谱法。以Ｓｈｉｍ－ｐａｃｋ ＣＬＣ－ＯＤＳ柱为分析柱,以甲醇－水（体积比５：２）,用磷酸调至ｐＨ３．０）为流动相,流速０．７ｍＬ／ｍｉｎ,检测波长为２２０ｎｍ,外标法定量。顺、反丁烯二酸的检出限分别为０．１０和０．０７５ｍｇ／Ｌ（Ｓ／Ｎ＝２）;相对标准偏差分别为０．４７％和０．５４％（ｎ＝３）。二者的线性范围均为１０～６０     

四甲基二硅桥连二(1-苯基环己基环戊二烯基)四羰基二铁的合成、结构及热重排反应研究

1,2-二(1-苯基环己基环戊二烯基)四甲基二硅烷与Fe(CO)₅在二甲苯中加热回流生成二铁化合物(Me₂SiSiMe₂)[(1-Ph-c-C₆H₁₀C₅H₃)Fe(CO)]₂(μ-CO)₂(2).通过柱层析分离到化合物2的顺反异构体2c和2t,并分别进行热重排反应,发现顺式底物2c重排生成反式重排产物[Me₂Si(c-C₆H₁₀PhC₅H₃)Fe(CO)₂]₂(3t),而反式底物2t重排则生成顺式重排产物3c.这表明重排反应是立体专一性的.通过X射线衍射分析测定了化合物2c和3t的晶体结构.     

Rapid high-performance liquid chromatography method for the analysis of sodium benzoate and potassium sorbate in foods

A rapid and reliable method is presented for the determination of the preservatives sodium benzoate and potassium sorbate in fruit juices, sodas, soy sauce, ketchup, peanut butter, cream cheese, and other foods. The procedure utilizes high-performance liquid chromatography (HPLC) followed by UV diode array detection for identification and quantitation of the two preservatives. Liquid samples were prepared by diluting 1 ml of the sample with 10 ml of an acetonitrile/ammonium acetate buffer solution. Samples of viscous or solid foods were prepared by blending the sample with the same buffer solution in a 1:5 ratio followed by a dilution identical to liquid samples. All samples were filtered to remove particulate matter prior to analysis. The HPLC determination of the preservatives was performed using a reversed-phase C18 column and UV detection at 225 nm for sodium benzoate and 255 nm potassium sorbate. The percentage of preservative in the sample was calculated by external standard using authentic sodium benzoate and potassium sorbate. Apple juice, apple sauce, soy sauce, and peanut butter, spiked at 0.10 and 0.050% for both sodium benzoate and potassium sorbate, yielded recoveries ranging from 82 to 96%. The method can detect 0.0010% (10 mg/l) of either preservative in a juice matrix.     

Overview of methods for the determination of trans fatty acids by gas chromatography, silver-ion thin-layer chromatography, silver-ion liquid chromatography, and gas chromatography/mass spectrometry

trans Isomers of naturally occurring cis-unsaturated fatty acids are produced when liquid vegetable oils or marine oils are partially hydrogenated to produce margarine, shortenings, and other hardened-fat products. Isomeric trans fatty acids are also formed in the intestinal tract of ruminants, and they appear in small amounts in dairy products and ruminant meat. Currently, satisfactory analyses for the fatty acid profiles of fats containing trans fatty acids are obtained by gas chromatography (GC) using capillary columns coated with highly polar cyanosilicone stationary phases. In capillary GC methods, the key limitation has been the incomplete separation of trans-monoenoic acid isomers from their cis isomers; however, recent reports have demonstrated that improvements in separation are attainable with the use of 100 m columns. In these columns, there is very little overlap of cis and trans isomers. More accurate trans fatty acid analyses can be obtained by coupling GC with either silver-nitrate thin-layer chromatography or silver-nitrate liquid chromatography.     

Stereoselective synthesis of unnatural spiroisoxazolinoproline-based amino acids and derivatives

A route to spiroisoxazolinoproline-based amino acid derivatives is reported in which exo-methyleneprolinate 4 (tert-butyl ester) reacts as a dipolarophile with nitrile oxides to generate spiroisoxazolinoprolinates 7/10/11 in good yields (70-75%) and with ca. 1:4 cis:trans diastereoselectivity. tert-Butyl spiroisoxazolinoprolinates were separable by column chromatography and amenable to scale-up leading to single diastereoisomers of N-Boc and N-Fmoc protected spiroisoxazolinoproline amino acids.