Electrocatalytic Determination of Ascorbic Acid Using a Palladium Coated Nanoporous Gold Film Electrode

Cyclic voltammetry and differential pulse voltammetry were used to investigate the electrochemical behavior of ascorbic acid (AA) on palladium coated nanoporous gold film (PdNPGF) electrode. The deposition of palladium was done through oxidation of copper UPD layer by palladium ions. This low Pd‐loading electrode behaved as the nanostructured Pd for electrocatalytic reaction. The PdNPGF electrode exhibits excellent electrocatalytic behavior by enhancing the AA oxidation peak current due to synergistic influence of the Pd film and NPGF. The kinetic parameters such as electron transfer coefficient, α, was 0.47 and the voltammetric responses of the PdNPGF electrode were linear against concentration of AA in the ranges of 2.50–33.75 mM and 0.10–0.50 mM with CV and DPV respectively.     

Electrocatalytic Response of a Glassy-Carbon Electrode Modified with a Polyvinylpyridine Film with Electrodeposited Palladium in the Oxidation of Oxalic Acid

The electrochemical properties of a glassy-carbon electrode modified with a polyvinylpyridine film with electrodeposited palladium were studied. Conditions were selected for preparing a composite film on a glassy-carbon surface. It was found that palladium particles deposited on the polyvinylpyridine film exhibited electrocatalytic activity in the oxidation of H₂C₂O₄. Compared to an unmodified electrode, the oxidation potential of oxalic acid decreased and the current of its oxidation multiply increased. The catalytic current of oxalic acid oxidation was a linear function of its concentration in the range from 1 × 10^–2 to 1 × 10^–6 M.     

掺铁氰根聚吡咯修饰电极测定抗坏血酸的研究

本文对掺铁氰根聚吡咯电极的聚合、伏安行为、电催化效应及其在抗坏血酸测定中的应用进行了研究。该膜电极性能稳定，对抗坏血酸催化效果好，抗坏血酸浓度在５×１０－６～６×１０－３ｍｏｌ／Ｌ范围内有很好的线性关系，用于测定果汁饮料中抗坏血酸获得满意结果。     

铁氰化镍修饰电极对抗坏血酸电催化氧化的研究

抗坏血酸(AH_2)在玻碳和铂电极上的过电位较大,其电极反应不可逆.有关AH_2在碳及其它修饰电极上的电催化氧化已有一些报道,如减压热处理、Al_2O_3微粒研磨、普鲁士蓝修饰膜和聚乙烯二茂铁修饰膜等.本文研究了铁氰化镍修饰膜电极催化AH_2氧化的电化学行为.发现其阳极峰电流与AH_2浓度呈线性关系,可测定1×10~(-7)mol/L的AH_2,其灵敏度比聚乙烯二茂铁修饰电极提高一个数量级.用于蔬菜、水果中AH_2的测定,结果满意.     

钛钼氧化物负载硅钨酸盐聚苯胺膜修饰电极制备及对抗坏血酸的电催化

用循环伏安法研究了金属氧化物(TiO2-MoO3)负载硅钨酸盐聚苯胺膜电极的制备,优化了聚合条件,并对该化学修饰电极的电化学行为,包括溶液的pH的影响等进行了研究,同时研究了抗坏血酸在此修饰电极上的电化学行为。该修饰膜对抗坏血酸有良好的电催化氧化作用。用计时电流法及伏安法研究了抗坏血酸在此修饰电极上的电化学行为,计算出抗坏血酸在修饰电极膜内的表观扩散系数为1.88×10-7cm2/s;抗坏血酸浓度在5.0×10-5-6.9×10-3mol/L范围内呈线性关系,相关系数为0.9961,检出限为1.2×10-6mol/L。可用于测定西红柿、橙汁中的抗坏血酸,结果令人满意。     

聚对苯二酚修饰玻碳电极的制备及其对抗坏血酸的催化氧化作用

采用循环伏安(CV)法制备了聚对苯二酚薄膜修饰玻碳电极,利用其电催化氧化作用建立了抗坏血酸的定量分析方法,探讨了其催化氧化机理。研究发现:在0.2 mol/L Na2HPO4-NaH2PO4(PBS,pH 7.0)缓冲溶液中,以0.1 mol/L KC l作支持电解质,聚对苯二酚修饰电极(PHQ/CME)对抗坏血酸(AA)存在灵敏的催化氧化作用,氧化峰电位负移177 mV。应用微分脉冲伏安法(DPV)对AA进行定量分析,其氧化峰电流与AA浓度在3.3×10-5~1.7×10-2mol/L和1.7×10-2~1.2×10-1mol/L范围内呈良好的线性关系,检出限为3.3×10-6mol/L。机理研究结果表明:PHQ/CME上带有的酚羟基与脱氢抗坏血酸自由基之间形成的氢键是电催化氧化的主要原因。     

聚乙烯二茂铁修饰电极测定抗坏血酸

化学修饰电极是近几年来活跃于电化学及电分析化学领域的一个新的研究课题,成功地应用于表面配位化学、光电转化、表面催化反应及痕量元素检测等方面。具有电活性的聚乙烯二茂铁修饰电极对抗坏血酸的氧化有催化作用。     

Amperometric Determination of Ascorbic Acid at an Electrodeposited Redox Polymer Film Modified Gold Electrode

A sensitive and selective electrochemical method for the determination of ascorbic acid was developed. It was shown that a hydrated osmium complex‐containing redox polymer film can be electrodeposited at the gold electrode and it exhibits excellent electrocatalytic activity towards the oxidation of ascorbic acid. In contrast to a bare gold electrode, the oxidation current of ascorbic acid increased greatly and the oxidation peak potential shifted negatively to about 0.01 V (vs. SCE) at the modified electrode. Amperometric measurements were performed at an applied potential of 0.01 V and a linear response was obtained in the range of 2–400 μM with a limit of detection (LOD) of 0.6 μM (S/N=3). The interference studies showed that the modified electrode exhibits excellent selectivity in the presence of large excess of uric acid and dopamine. The proposed procedure was successfully applied to the determination of ascorbic acid in human urine samples.     

基于溶胶-凝胶普鲁士蓝膜修饰玻碳电极电催化氧化测定水果中抗坏血酸

制备了一种溶胶-凝胶普鲁士蓝膜修饰玻碳电极,研究了抗坏血酸在该电极上的电催化氧化作用,建立了测定抗坏血酸的方法。在磷酸缓冲溶液(pH 5.0)中,在2.5×10-5-3.2×10-3mol.L-1范围内,抗坏血酸的浓度与氧化峰电流呈线性关系,相关系数为0.999 5,检出限为7×10-6mol.L-1。该修饰电极具有制备简单、灵敏度高、响应速度快、稳定性和重现性好等特点。方法已用于水果中抗坏血酸的测定,所得结果与药典法测得结果一致。     

掺磷钼杂多酸聚吡咯修饰铂微电极对抗坏血酸的电催化氧化

本文报道了掺磷钼杂多酸的聚吡咯修饰电极的制备方法，伏安行为及其对抗坏血酸的电催化效应，该膜电极性能稳定，对抗坏血酸的电催化效果好，抗坏血酸浓度在５×１０＾－７－１．０×１０＾－４范围内与峰电流有良好的线性关系，用于测定和蔬菜和水果中抗坏血酸获得满意结果。     

应用锑膜修饰电极示差脉冲伏安法同时测定多巴胺和抗坏血酸

应用电化学还原法自制的锑膜修饰玻碳电极(GCE)研究了多巴胺(DA)和抗坏血酸(AA)在此修饰电极上的电化学性质.DA和AA在此修饰电极上的氧化电位依次为0.676 V和0.360 V,两者相差316 mV.此电位差值远大于两者在裸GCE电极上的差值(136 mV).据此,可用锑膜修饰的GCE,用示差脉冲伏安法同时测定DA和AA.测定DA和AA的线性范围分别为6.80×10-7～1.33×10-2,2.60×10-6～1.20×10-3mol·L-1,方法的检出限依次为1.50×10-7,6.70×10-7mol·L-1.应用所提出的方法分析了DA的针剂和AA的片剂样品,所得结果与标示值相符,并测得方法的回收率在97.9%～99.3%之间.     

Determination of Ascorbic Acid by a Composite-Modified Platinum Electrode

Thin composite layers of poly(3,4-ethylenedioxythiophene) and poly(4-lithium styrene sulfonic acid) were formed on a platinum surface. The modified electrode platinum/polyethylenedioxythiophene:poly(4-lithium styrene sulfonic acid) was characterized by cyclic voltammetry, chronocoulometry, and electrochemical impedance spectroscopy. The results showed that the electrode may be used as a working electrode for electroanalytical methods. This electrode was used for the determination of ascorbic acid. The effect of composite layer thickness on the functionality of the electrode was characterized for ascorbic acid determination. Another investigated aspect was the process of ascorbic acid oxidation in solutions of various pH values. The results showed that the modified electrode was suitable for the determination of ascorbic acid in various electrolytes from pH 2 to 7.6 in the presence and absence of buffer solutions. The linear dynamic range of ascorbic acid concentrations corresponded to its concentrations in physiological fluids.     

L-半胱氨酸自组装膜修饰金电极对抗坏血酸的电催化作用及其测定

金电极表面对L 半胱氨酸 (L Cys)有特性吸附 ,而L Cys分子在等电点pH附近因静电引力和氢键作用形成分子对 ,从而在电极表面自组装形成L Cys双层膜。L Cys修饰金电极对抗坏血酸 (AA)具有良好的电催化作用。用示差脉冲伏安法对AA进行了测定 ,氧化电流与AA的浓度在 1.0× 10 -3 ～ 4× 10 -6mol/L范围内呈良好的线性关系 ,线性相关系数为 0 .9981;检出限为 4× 10 -7mol/L。用于药片中AA含量的测定 ,结果令人满意。     

还原聚苯胺插层氧化石墨纳米材料修饰电极用于抗坏血酸测定的研究

本文研制成还原聚苯胺插层氧化石墨纳米材料(R-(PAI/GO))修饰电极,并用于测定抗坏血酸(AA)。在pH5.02的Brinton-Robinson(B-R)缓冲溶液中,AA可在R-(PAI/GO)修饰电极上产生一对氧化还原峰,该峰的峰电流与AA浓度的对数在1.0×10-9~4.24×10-2mol/L范围呈良好的线性关系,相关系数为0.9910。多巴胺(DA)等物质对AA的测定无干扰。该电极制作简单,有良好的稳定性和重现性,用于实际试样中AA的测定,结果满意。     

聚伊文思蓝修饰电极对多巴胺和抗坏血酸的电分离及同时测定

研究多巴胺(DA)和抗坏血酸(AA)在聚伊文思蓝(Evans Blue)修饰电极上的伏安行为,建立差示脉冲伏安测定法.在pH4.5磷酸盐缓冲液中,聚伊文思蓝修饰电极对DA和AA有显著的增敏和电分离作用.DA和AA氧化峰电流与浓度分别在1.0×10-6~3.0×10-5mol/L和5.0×10-6~1.05×10-4mol/L范围内呈良好的线性关系,检测限分别为2.5×10-7mol/L和3.0×10-7mol/L.当DA与AA共存时,由该修饰电极检测的二者氧化峰电位差达184 mV,故可同时测定DA和AA,并有效消除其它组分对DA测定的干扰,已用于实际样品中DA和AA含量的测定,结果令人满意.     

聚色氨酸／镍复合膜修饰电极测定抗坏血酸的研究

采用电化学聚合法制备了聚色氨酸／镍复合膜修饰玻碳电极,研究了抗坏血酸在该修饰电极上的电化学行为,建立了测定痕量抗坏血酸的新方法。在pH6．2的磷酸盐缓冲溶液中,抗坏血酸在修饰电极上产生一个灵敏的氧化峰,采用线性扫描伏安法测定,其氧化峰电流与抗坏血酸浓度在2．0×10^-6 -1．0×10^-3mol／L范围内呈良好的线性关系,检出限为5．0×10^-7mol／L。对1．0×10^-4mol／L抗坏血酸溶液平行测定6次,测定结果的相对标准偏差为1．9％。该法用于片剂中抗坏血酸含量的测定,加标回收率为97．8％～101．2％。     

Ag-AgI电极测定药物、果蔬中抗坏血酸

报道了电解Ag-AgI电极测定药物和果蔬中微量抗坏血酸。并研究了Ag-AgI电极性能、测定条件及干扰物质的影响,方法测定抗环血酸的线性范围为1.00×10-2~1.00×10-6mol/L,回收率96%~102%。     

纳米铁氰化镍修饰铝电极对抗坏血酸的电催化氧化

利用多孔阳极氧化铝作模板,用化学修饰方法在铝基体上制备了纳米铁氰化镍修饰电极。研究了修饰电极的电化学特征及其电催化氧化抗坏血酸的行为。结果表明,纳米铁氰化镍修饰铝电极的循环伏安图上呈现一对可逆氧化还原峰。检测抗坏血酸,纳米铁氰化镍修饰铝电极比铁氰化镍修饰铝电极有更高的灵敏度。用安培法测定抗坏血酸,线性范围为1×10-6～1.5×10-2mol/L,检出限为2.4×10-7mol/L。本方法应用于实际样品中抗坏血酸的检测,结果令人满意。     

抗坏血酸在多壁碳纳米管修饰玻碳电极上的催化氧化

多壁碳纳米管;抗坏血酸;修饰电极;电催化;伏安法