蛋氨酸亚砜还原酶及其在白内障发生发展中的作用

蛋氨酸(Met)是生物体内很容易被氧化的氨基酸之一,氧化应激条件下,生成S型和R型蛋氨酸亚砜(MetO), 晶状体蛋白中MetO的增加与晶状体老化和白内障形成相关。生物体内存在着两种不同的蛋氨酸亚砜还原酶(Msr),即MsrA和B,分别能特异性地作用于自由或结合在蛋白质中的S-MetO和R-MetO,将MetO修复为Met,从而避免了蛋白质结构和功能的改变。在哺乳动物中,MsrA以单基因形式存在,而MsrB有3种异构体,分别为MsrB1,MsrB2和MsrB3,其中MsrB1是一个硒蛋白,又被称为硒蛋白R(SelR)。本文介绍了Msrs的基因表达、分布和亚细胞定位,比较了MsrA和MsrBs蛋白结构和催化机制的异同,讨论了晶状体蛋白Met残基的氧化与白内障形成和发展的关系。现有的这些研究结果表明Msrs作为一类特异性的抗氧化还原酶,通过对MetO的修复,在抑制晶状体的损伤方面发挥重要作用。此外,MsrB1作为一个硒蛋白受机体硒水平的调节,因此,通过补硒保持晶状体适当的硒浓度以维持MsrB1的活性,对白内障的形成和发展可能具有一定的预防作用。     

A Facile Method for the Separation of Methionine Sulfoxide Diastereomers,Structural Assignment,and DFT Analysis

Methionine (Met) oxidation is an important biological redox node, with hundreds if not thousands of protein targets. The process yields methionine oxide (MetO). It renders the sulfur chiral, producing two distinct, diastereomerically related products. Despite the biological significance of Met oxidation, a reliable protocol to separate the resultant MetO diastereomers is currently lacking. This hampers our ability to make peptides and proteins that contain stereochemically defined MetO to then study their structural and functional properties. We have developed a facile method that uses supercritical CO₂ chromatography and allows obtaining both diastereomers in purities exceeding 99 %. ¹H NMR spectra were correlated with X-ray structural information. The stereochemical interconversion barrier at sulfur was calculated as 45.2 kcal mol⁻¹, highlighting the remarkable stereochemical stability of MetO sulfur chirality. Our protocol should open the road to synthesis and study of a wide variety of stereochemically defined MetO-containing proteins and peptides.     

Type I Photosensitized Oxidation of Methionine†

Methionine (Met) is an essential sulfur‐containing amino acid, sensitive to oxidation. The oxidation of Met can occur by numerous pathways, including enzymatic modifications and oxidative stress, being able to cause relevant alterations in protein functionality. Under UV radiation, Met may be oxidized by direct absorption (below 250 nm) or by photosensitized reactions. Herein, kinetics of the reaction and identification of products during photosensitized oxidation were analyzed to elucidate the mechanism for the degradation of Met under UV‐A irradiation using pterins, pterin (Ptr) and 6‐methylpterin (Mep), as sensitizers. The process begins with an electron transfer from Met to the triplet‐excited state of the photosensitizer (Ptr or Mep), to yield the corresponding pair of radicals, Met radical cation (Met^?+) and the radical anion of the sensitizer (Sens^??). In air‐equilibrated solutions, Met^?+ incorporates one or two atoms of oxygen to yield methionine sulfoxide (MetO) and methionine sulfone (MetO₂), whereas Sens^?? reacts with O₂ to recover the photosensitizer and generate superoxide anion (O₂^??). In anaerobic conditions, further free‐radical reactions lead to the formation of the corresponding dihydropterin derivatives (H₂Ptr or H₂Mep).     

Electron Transfer Reactions of Photochemically Generated Ruthenium(III)–Polypyridyl Complexes with Methionines

The oxidation of methionine (Met) plays an important role during biological conditions of oxidative stress as well as for protein stability. Ruthenium(III)–polypyridyl complexes, [Ru(NN)₃]³⁺, generated from the photochemical oxidation of the corresponding Ru(II) complexes with molecular oxygen, undergo a facile electron transfer reaction with Met to form methionine sulfoxide (MetO) as the final product. Interaction of [Ru(NN)₃]³⁺ with methionine leads to the formation of >S^+● and (>S∴S<)⁺ species as intermediates during the course of the reaction. The interesting spectral, kinetic, and mechanistic study of the electron transfer reaction of four substituted methionines with six [Ru(NN)₃]³⁺ ions carried out in aqueous CH₃CN (1:1, v/v) by a spectrophotometric technique shows that the reaction rate is susceptible to the nature of the ligand in [Ru(NN)₃]³⁺ and the structure of methionine. The rate constants calculated by the application of Marcus semiclassical theory to these redox reactions are in close agreement with the experimental values.     

CHEMISTRY OF SINGLET OXYGEN—XXV. PHOTOOXYGENATION OF METHIONINE*

Abstract— Methionine (Met) photooxidation sensitized by rose bengal has been studied as a function of pH and other variables. At pH ≤ 6, the reaction is a simple one, 2 Met + O₂→ 2 Methionine sulfoxide (MetO). At pH 6–10, another mechanism becomes important, leading to dehydromethionine; the structure of this compound was correctly assigned by Lavine (1945) as the heterocyclic N-S compound 2. One mole of H₂O₂ is also produced in this process. Dehydromethionine hydrolyzes slowly to MetO. Above pH9, a process leading directly to MetO + H₂O₂ becomes important. The stoichiometry of the latter two processes are Met + O₂+ H₂O → MetO + H₂O₂; competition among these three processes accounts for the puzzling variations in O₂ uptake. N-Formylated derivatives of methionine undergo only the first and third processes. Substantial catalytic effects of buffers complicate the picture. All the reactions appear to involve singlet oxygen, since there is the predicted effect of D₂O vs H₂O on the rate of reaction, although the situation is complicated by apparent aggregation of Met above 5 mM.     

An effective and rapid determination by MALDI/TOF/TOF of methionine sulphoxide content of ApoA‐I in type 2 diabetic patients

Increased oxidation of low density lipoprotein (LDL) is characteristic of atherosclerosis. In this frame, high density lipoproteins (HDL) play an important role, being able to remove lipid peroxides (LPOs) and cholesterol from oxidized LDL, so exhibiting a protective role against atherosclerosis. A wide range of reactive compounds lead to the oxidation of methionine (Met) residues with the formation of methionine sulphoxide (MetO) in apolipoprotein A‐I (ApoA‐I). Consequently, the determination of MetO level can give both an evaluation of oxidative stress and the reduced capability of ApoA‐I in LPOs and cholesterol transport. For these reasons, the development of analytical methods able to determine the MetO level is surely of interest, and we report here the results obtained by MALDI mass spectrometry. Copyright © 2013 John Wiley & Sons, Ltd.     

Rapid method for quantifying the extent of methionine oxidation in intact calmodulin

We have developed a method for rapidly quantifying the extent to which the functionally important Met¹⁴⁴ and Met¹⁴⁵ residues near the C-terminus of calmodulin (CaM) are converted to the corresponding sulfoxides, Met(O). The method utilizes a whole protein collision-induced dissociation (CID) approach on an electrospray ionization quadrupole time-of-flight (ESI-Q-TOF) mass spectrometer. Using standards of CaM oxidized by hydrogen peroxide (H₂O₂) or peroxynitrite (ONOO⁻), we demonstrated that CID fragmentation of the protein ions resulted in a series of C-terminal singly charged y₁–y₁₅ ions. Fragments larger than y₄ exhibited mass shifts of +16 or +32 Da, corresponding to oxidation of one or two methionines, respectively. To assess the extent of oxidative modification for Met¹⁴⁴ and Met¹⁴⁵ to Met(O), we averaged the ratio of intensities for y _n , y _n + 16, and y _n + 32 ions, where n = 6–9. By alternating MS and CID scans at low and high collision energies, this technique allowed us to rapidly determine both the distribution of intact CaM oxiforms and the extent of oxidative modification in the C-terminal region of the protein in a single run. We have applied the method to studies of the repair of fully oxidized CaM by methionine sulfoxide reductases (MsrA and MsrB), which normally function in concert to reduce the S and R stereoisomers of methionine sulfoxide. We found that repair of Met(O)¹⁴⁴ and Met(O)¹⁴⁵ did not go to completion, but was more efficient than average Met repair. Absence of complete repair is consistent with previous studies showing that accumulation of methionine sulfoxide in CaM can occur during aging (Gao, J.; Yin, D.; Yao, Y.; Williams, T. D.; Squier, T. C. Biochemistry 1998, 37, 9536–9548).     

Fifty-gigahertz Microwave Exposure Effect of Radiations on Rat Brain

The object of this study is to investigate the effects of 50-GHz microwave radiation on the brain of Wistar rats. Male rats of the Wistar strain were used in the study. Animals of 60-day age were divided into two groups—group 1, sham-exposed, and group 2, experimental (microwave-exposed). The rats were housed in a temperature-controlled room (25 °C) with constant humidity (40–50%) and received food and water ad libitum. During exposure, rats were placed in Plexiglas cages with drilled ventilation holes and kept in an anechoic chamber. The animals were exposed for 2 h a day for 45 days continuously at a power level of 0.86 μW/cm² with nominal specific absorption rate 8.0 × 10⁻⁴ w/kg. After the exposure period, the rats were killed and homogenized, and protein kinase C (PKC), DNA double-strand break, and antioxidant enzyme activity [superoxides dismutase (SOD), catalase, and glutathione peroxidase (GPx)] were estimated in the whole brain. Result shows that the chronic exposure to these radiations causes DNA double-strand break (head and tail length, intensity and tail migration) and a significant decrease in GPx and SOD activity (p = <0.05) in brain cells, whereas catalase activity shows significant increase in the exposed group of brain samples as compared with control (p = <0.001). In addition to these, PKC decreased significantly in whole brain and hippocampus (p < 0.05). All data are expressed as mean ± standard deviation. We conclude that these radiations can have a significant effect on the whole brain.     

Combined Raman and IR spectroscopic study on the radical-based modifications of methionine

Among damages reported to occur on proteins, radical-based changes of methionine (Met) residues are one of the most important convalent post-translational modifications. The combined application of Raman and infrared (IR) spectroscopies for the characterisation of the radical-induced modifications of Met is described here. Gamma-irradiation was used to simulate the endogenous formation of reactive species such as hydrogen atoms (^•H), hydroxyl radicals (^•OH) and hydrogen peroxide (H₂O₂). These spectroscopic techniques coupled to mass experiments are suitable tools in detecting almost all the main radical-induced degradation products of Met that depend on the nature of the reactive species. In particular, Raman spectroscopy is useful in revealing the radical-induced modifications in the sulphur-containing moiety, whereas the IR spectra allow decarboxylation and deamination processes to be detected, as well as the formation of other degradation products. Thus, some band patterns useful for building a library of spectra–structure correlation for radical-based degradation of Met were identified. In particular, the bands due to the formation of methionine sulfoxide, the main oxidation product of Met, have been identified. All together, these results combine to produce a set of spectroscopic markers of the main processes occurring as a consequence of radical stress exposure, which can be used in a spectroscopic protocol for providing a first assessment of Met modifications in more complex systems such as peptides and proteins, and monitoring their impact on protein structure.     

Changes of mechanical properties in cold-crystallized syndiotactic polypropylene during aging

Many semicrystalline polymers undergo a process of aging when they are stored at temperatures higher than their glass-transition temperature (T _g). Syndiotactic polypropylene was quenched from the melt to −40 °C, crystallized from the glassy state at 20 or 40 °C and stored at the respective temperature for different aging times up to 7200 h. A significant increase in the tensile modulus and stress at yield and a decrease in strain at yield were observed for both aging temperatures. Differential scanning calorimetry (DSC) scans of aged material showed an endothermic annealing peak 15–30 °C above the previous aging temperature, the maximum temperature and enthalpic content of which increased with aging time. The position and the shape of the melting peak were not affected by aging. Scans of the storage modulus obtained from dynamic mechanical analyser measurements indicated a softening process starting at about 20 °C above the aging temperature and correlating with the annealing peak detected by DSC. Density measurements and wide-angle X-ray scattering investigations revealed that neither the crystallinity increased significantly nor did the crystal structure change. So the observed property changes induced by aging are attributed to microstructural changes within the amorphous phase. Furthermore, it could be shown by annealing experiments carried out at 60 °C, that aging above T _g is, analogous to aging below T _g (physical aging), a thermoreversible process. Received: 18 September 2000 Accepted: 2 January 2001     

Anodic oxidation of 2-aminofluorene in CH2Cl2 + 0.2 M Bu4NBF4: electrochemical behaviour of the derived oxidation products

The physicochemical properties and electrochemical behaviour of products obtained by anodic oxidation of 2-aminofluorene in CH₂Cl₂ + 0.2 M Bu₄NBF₄ are presented together with the oxidation conditions. Received: 8 January 1998 / Accepted: 21 September 1998     

Analysis of oxidation process of cholecystokinin octapeptide with reactive oxygen species by high‐performance liquid chromatography and subsequent electrospray ionization mass spectrometry

The C‐terminal octapeptide of cholecystokinin (CCK8) includes some easily oxidizable amino acids. The oxidation of CCK8 by reactive oxygen species (ROS) such as hydrogen peroxide (H₂O₂) and hydroxyl radicals (OH^?) was investigated using reversed‐phase high performance liquid chromatography (RP‐HPLC) and subsequent electrospray ionization mass spectrometry. The mechanism of oxidation of CCK8 in the H₂O₂ system differed from that of CCK8 in the Fenton system, in which OH^? are produced. In the H₂O₂ system, ²⁸Met and ³¹Met were oxidized to methionine sulfoxide, and no further oxidation or degradation/hydrolysis occurred. On the other hand, in the Fenton system, ²⁸Met and ³¹Met residues were oxidized to methionine sulfone via the formation of methionine sulfoxide. In addition, the oxidized product was observed at the Trp residue but not at the Tyr residue, and small peptide fragments from CCK8 were observed in the Fenton system. From these results, it was concluded that ²⁸Met and ³¹Met residues of CCK8 are susceptible to oxidation by ROS. Copyright © 2009 John Wiley & Sons, Ltd.     

New noncellular fluorescence microplate screening assay for scavenging activity against singlet oxygen

In the present study, a new fluorescence microplate screening assay for evaluating scavenging activity against singlet oxygen (¹O₂) was implemented. The chemical generation of ¹O₂ was promoted using the thermodissociable endoperoxide of disodium 3,3′-(1,4-naphthalene)bispropionate (NDPO₂). The detection of ¹O₂ was achieved using dihydrorhodamine 123 (DHR), a nonfluorescent molecule that is oxidizable to the fluorescent form rhodamine 123 (RH). The combined use of a ¹O₂-selective generator and a highly sensitive probe (DHR) was then successfully applied to perform a screening assay of the ¹O₂ scavenging activities of ascorbic acid, penicillamine, cysteine, N-acetylcysteine (NAC), methionine, reduced glutathione (GSH), dihydrolipoic acid, lipoic acid, and sodium azide. All of these antioxidants exhibited concentration-dependent ¹O₂ scavenging capacities. They could be ranked according to observed activity: ascorbic acid> cysteine> penicillamine> dihydrolipoic acid > GSH> NAC> sodium azide> lipoic acid (IC₅₀ values of 3.0 ± 0.2, 8.0 ± 0.7, 10.9 ± 0.8, 25.2 ± 4.5, 57.4 ± 5.9, 138 ± 13, 1124 ± 128, 2775 ± 359 μM, mean±SEM, respectively) > methionine (35% of scavenging effect at 10 mM). In conclusion, the use of NDPO₂ as a selective generator for ¹O₂ and its fluorescence detection by the highly sensitive probe DHR is shown to be a reliable and resourceful analytical alternative means to implement a microplate screening assay for scavenging activity against ¹O₂. Generation and detection of singlet oxygen     

Electrochemical determination of uric acid using a mesoporous SiO2-modified electrode

A mesoporous SiO₂-modified carbon paste electrode for the determination of uric acid is described. Owing to the regular and specific mesoporous channels, numerous active sites and a large surface area, the mesoporous SiO₂-modified electrode greatly increases the oxidation peak current of uric acid. Based on this, a highly sensitive, rapid and convenient electrochemical method was developed for the determination of uric acid after optimizing the experimental parameters (supporting electrolyte, content of mesoporous SiO₂, accumulation potential and time). The linear range is from 2.5 × 10⁻⁷ to 2.0 × 10⁻⁵ mol L⁻¹, and the limit of detection is estimated to be 8.0 × 10⁻⁸ mol L⁻¹. The relative standard deviation for 10 mesoporous SiO₂-modified electrodes is 5.8%. The method was used to determine uric acid in human serum samples. Correspondence: Kangbing Wu, Department of Chemistry, Huazhong University of Science and Technology, Wuhan 430074, P.R. China     

Polygermanosilyne Calcium Hydroxide Intercalation Compounds Formed by Topotactic Transformation of Ca(Si 1 − x Ge x )2 Alloy Zintl Phases in Ambient Atmosphere

Summary.   Epitaxial thin films of Ca(Si _1 − x Ge _x )₂ with 0 < x ≤ 1 are found to react with the moisture of ambient atmosphere to form new Ca-Si-Ge-O-H compounds which were studied by X-ray diffraction, energy dispersive X-ray analysis, infrared absorption, and thermally induced hydrogen desorption measurements. Pure CaGe₂ forms the polygermyne calcium hydroxide intercalation compound Ca(OH)₂(GeH)₂ upon exposure to humidity, with a trigonal tr6 crystal lattice with a = 4.00(1) and c = 65.3(1)?. In mixed Ca(Si _1 − x Ge _x )₂ with smaller Ge content, the group-14 layers are subject to intense oxidation leading to decreased crystallinity. The products exhibit characteristic colours and intense photoluminescence, the peak luminescence varying from 1.35 eV for the reaction product of Ca(Si_0.3Ge_0.7)₂ to 2.6 eV for that of Ca(Si_0.5Ge_0.5)₂. Received March 12, 2001. Accepted (revised) May 2, 2001     

Microwave Exposure Affecting Reproductive System in Male Rats

The object of present study is to investigate the effects of 50 GHz microwave frequency electromagnetic fields on reproductive system of male rats. Male rats of Wistar strain were used in the study. Animals 60 days old were divided into two groups—group I sham exposed and group II experimental (microwave exposed). During exposure, rats were confined in Plexiglas cages with drilled ventilation holes for 2 h a day for 45 days continuously at a specified specific absorption rate of 8.0 × 10⁻⁴ W/kg. After the last exposure, the rats were sacrificed immediately and sperms were collected. Antioxidant enzyme (superoxide dismutase (SOD), glutathione peroxidase (GPx), and catalase), histone kinase, apoptosis, and cell cycle were analyzed in sperm cells. Result shows a significant decrease in the level of sperm GPx and SOD activity (p ≤ 0.05), whereas catalase shows significant increase in exposed group of sperm samples as compared with control (p < 0.02). We observed a statistically significant decrease in mean activity of histone kinase as compared to the control (p < 0.016). The percentage of cells dividing in a spermatogenesis was estimated by analyzing DNA per cell by flow cytometry. The percentage of apoptosis in electromagnetic field exposed group shows increased ratio as compared to sham exposed (p < 0.004). There were no significant differences in the G₀/G₁ phase; however, a significant decrease (p < 0.026) in S phase was obtained. Results also indicate a decrease in percentage of G₂/M transition phase of cell cycle in exposed group as compared to sham exposed (p < 0.019). We conclude that these radiations may have a significant effect on reproductive system of male rats, which may be an indication of male infertility.     

Electrochemistry and electrocatalytic activity of polypyrrole/ferrocyanide films on a glassy carbon electrode

Functionalized polypyrrole films were prepared by incorporation of Fe(CN)₆ ³⁻ as doping anion during the electropolymerization of pyrrole at a glassy carbon electrode from aqueous solution. The electrochemical behavior of the Fe(CN)₆ ³⁻/Fe(CN)₆ ⁴⁻ redox couple in polypyrrole was studied by cyclic voltammetry. An obvious surface redox reaction was observed and dependence of this reaction on the solution pH was illustrated. The electrocatalytic ability of polypyrrole film with ferrocyanide incorporated was demonstrated by oxidation of ascorbic acid at the optimized pH of 4 in a glycine buffer. The catalytic effect for mediated oxidation of ascorbic acid was 300 mV and the bimolecular rate constant determined for surface coverage of 4.5 × 10⁻⁸ M cm⁻² using rotating disk electrode voltammetry was 86 M⁻¹ s⁻¹. Furthermore, the catalytic oxidation current was linearly dependent on ascorbic acid concentration in the range 5 × 10⁻⁴–1.6 × 10⁻² M with a correlation coefficient of 0.996. The plot of i _p versus v ^1/2 confirms the diffusion nature of the peak current i _p. Received: 12 April 1999 / Accepted: 25 May 1999     

Kinetics for the Oxygen Evolution Reaction and Application of the Ti/SnO<Subscript>2</Subscript> + RuO<Subscript>2</Subscript> + MnO<Subscript>2</Subscript> Electrode

A Ti/SnO₂ + RuO₂ + MnO₂ electrode was prepared by thermal decomposition of their salts. Results from SEM and XPS analyses, respectively, indicate that the coating layer exhibits a compact structure and the oxidation state of Mn in the coating layer is +IV. The experimental activation energy for the oxygen evolution reaction, which increased linearly with increasing overpotential, is about 8 kJ⋅mol⁻¹ at the equilibrium potential (η=0). The electrocatalytic characteristics of the anode are discussed in terms of ligand substitution reaction mechanisms (Sn1 and Sn2). It was found that the transition state for oxygen evolution at the anode in acidic solution follows a dissociative mechanism (Sn1 reaction). The Ti/SnO₂ + RuO₂ + MnO₂ anode in conjunction with UV illumination was used to degrade phenol solutions, where the concentration of phenol remaining was determined by high-performance liquid chromatography (HPLC). The results indicate that the degradation efficiency of phenol on the anode can reach 96.3% after photoelectrocatalytic oxidation for 3 h.     

Catalytic Spectrophotometric Determination of Molybdenum

Summary.  A highly selective, sensitive, and simple catalytic method for the determination of molybdenum in natural and waste waters was developed. It is based on the catalytic effect of Mo(VI) on the oxidation of 2-aminophenol with H₂O₂. The reaction is monitored spectrophotometrically by tracing the oxidation product at 430 nm after 10 min of mixing the reagents. Addition of 800 μg · cm⁻³ EDTA conferred high selectivity; however, interfering effects of Au(III), Cr(III), Cr(VI), and Fe(III) had to be eliminated by a reduction and co-precipitation procedure with SnCl₂ and Al(OH)₃. Mo(VI) shows a linear calibration graph up to 11.0 ng · cm⁻³; the detection limit, based on the 3S _b-criterion, is 0.10 ng · cm⁻³. The unique selectivity and sensitivity of the new method allowed its direct application to the determination of Mo(VI) in natural and waste waters. Received April 11, 2001. Accepted (revised) June 18, 2001     

Electrocatalytic oxidation of quinine sulfate at a multiwall carbon nanotubes-ionic liquid modified glassy carbon electrode and its electrochemical determination

The electrocatalytic oxidation of quinine sulfate (QS) was investigated at a glassy carbon electrode, modified by a gel containing multiwall carbon nanotubes (MWCNTs) and room-temperature ionic liquid of 1-Butyl-3-methylimidazolium hexafluorophate (BMIMPF₆) in 0.10 M of phosphate buffer solution (PBS, pH 6.8). It was found that an irreversible anodic oxidation peak of QS with E _pa as 0.99 V appeared at MWCNTs-RTIL/glassy carbon electrode (GCE). The electrode reaction process was a diffusion-controlled one and the electrochemical oxidation involved two electrons transferring and two protons participation. Furthermore, the charge-transfer coefficient (α), diffusion coefficient (D), and electrode reaction rate constant (k _f) of QS were found to be 0.87, 7.89 × 10⁻³ cm²⋅s⁻¹ and 3.43 × 10⁻² s⁻¹, respectively. Under optimized conditions, linear calibration curves were obtained over the QS concentration range 3.0 × 10⁻⁶ to 1.0 × 10⁻⁴ M by square wave voltammetry, and the detection limit was found to be 0.44 μM based on the signal-to-noise ratio of 3. In addition, the novel MWCNTs-RTIL/GCE was characterized by the electrochemical impedance spectroscopy and the proposed method has been successfully applied in the electrochemical quantitative determination of quinine content in commercial injection samples and the determination results could meet the requirement.