Understanding the synthesis of DEGVE pulsed plasmas for application to ultra thin biocompatible interfaces

There is interest in the development of novel surface treatments for biocompatibility and non-fouling behaviors on various surfaces of in vivo devices. Polyethylene glycol thin films have shown promise as non-fouling passivation layers for such devices. Studies of the surface chemistry and non-fouling effectiveness of plasma deposited di(ethylene glycol) vinyl ether (DEGVE) films have observed that non-fouling performance is maximized when plasma deposition occurs at low values of average power, (<5 W). [Y.J. Wu, R.B. Timmons, J.S. Jen, Frank E. Molock, Non-fouling surfaces produced by gas phase pulsed plasma polymerization of an ultra low molecular weight ethylene oxide containing monomer, Colloids and Surfaces B: Biointerfaces 18 (2000) 235–248.] Chemical properties of plasma deposited films were directly attributed to the complex interactions occurring within the gas phase. In order to better understand the deposition process, as well as the significance of the conclusions drawn by Wu et al. [Y.J. Wu, R.B. Timmons, J.S. Jen, Frank E. Molock, Non-fouling surfaces produced by gas phase pulsed plasma polymerization of an ultra low molecular weight ethylene oxide containing monomer, Colloids and Surfaces B: Biointerfaces 18 (2000) 235–248.] an investigation of the gas phase behavior in DEGVE pulsed plasma discharges was performed. Infrared spectra were used to characterize the chemical composition and dissociative behavior of DEGVE plasmas across a range of average powers. This allowed for the construction of a dissociative model of the DEGVE monomer in the plasma discharge. Analysis of the observed dissociative pattern demonstrates the presence of key daughter species which would account for the observations made on deposited DEGVE films by Wu et al. [Y.J. Wu, R.B. Timmons, J.S. Jen, Frank E. Molock, Non-fouling surfaces produced by gas phase pulsed plasma polymerization of an ultra low molecular weight ethylene oxide containing monomer, Colloids and Surfaces B: Biointerfaces 18 (2000) 235–248.].     

Colloid probe AFM investigation of interactions between fibrinogen and PEG-like plasma polymer surfaces

Interaction forces between surfaces designed to be protein resistant and fibrinogen (Fg) were investigated in phosphate-buffered saline with colloid probe atomic force microscopy. The surfaces of the silica probes were coated with a layer of fibrinogen molecules by adsorption from the buffer. The technique of low-power, pulsed AC plasma polymerization was used to make poly(ethylene glycol) (PEG)-like coatings on poly(ethylene teraphthalate) by using diethylene glycol vinyl ether as the monomer gas. The degree of PEG-like nature of the films was controlled by use of a different effective plasma power in the chamber for each coating, ranging from 0.6 to 3.6 W. This produced a series of thin films with a different number of ether carbons, as assessed by X-ray photoelectron spectroscopy. The interaction force measurements are discussed in relation to trends observed in the reduction of fibrinogen adsorption, as determined quantitatively by (125)I radio-labeling. The plasma polymer coatings with the greatest protein-repelling properties were the most PEG-like in nature and showed the strongest repulsion in interaction force measurements with the fibrinogen-coated probe. Once forced into contact, all the surfaces showed increased adhesion with the protein layer on the probe, and the strength and extension length of adhesion was dependent on both the applied load and the plasma polymer surface chemistry. When the medium was changed from buffer to water, the adhesion after contact was eliminated and only appeared at much higher loads. This indicates that the structure of the fibrinogen molecules on the probe is changed from an extended conformation in buffer to a flat conformation in water, with the former state allowing for stronger interaction with the polymer chains on the surface. These experiments underline the utility of aqueous surface force measurements toward understanding protein-surface interactions, and developing nonfouling surfaces that confer a steric barrier against protein adsorption.     

Oligo(ethylene glycol) containing polymer brushes as bioselective surfaces

The nitroxide-mediated polymerization of styrenic monomers containing oligo(ethylene glycol) (OEGn) moieties was chosen for the preparation of biocompatible polymer brushes tethered to silicon oxide surfaces due to the broad range of monomer structures available and the use of a nonmetallic initiator. These surfaces were characterized by near-edge X-ray absorption fine structure and water contact angle measurements. The biocompatibility of these grown polymer brushes was studied and compared with deposited assemblies of surface-bound OEGn-terminated silanes with selected chain lengths. Grown polymer brushes with short OEGn side chains suppressed protein adsorption significantly more than the deposited assemblies of short OEGn chains, and this was attributed to higher surface coverage by the brushes. Cell adhesion studies confirmed that OEGn-containing polymer brushes are particularly effective in preventing nonspecific adhesion. Studies of protein adsorption and cell localization carried out with specific ligands on surfaces patterned demonstrated the potential of these surface-tethered polymer brushes for the formation of micro- and nanoscale devices.     

Characterization of low-fouling ethylene glycol containing plasma polymer films

Low-protein-fouling poly(ethylene glycol) (PEG-like) plasma polymer films were prepared using radio frequency glow discharge polymerization of diethylene glycol dimethyl ether (DGpp) on top of a heptylamine plasma polymer primer layer. By varying the plasma deposition conditions, the chemistry of the DGpp film was influenced, especially in regard to the level of ether content, which in turn influenced the relative levels of bovine serum albumin and lysozyme protein fouling. Surface potential measurements indicated that these surfaces carried a net negative charge. While protein fouling remained low ( approximately 10 ng/cm2), there was a slightly higher level of the positively charged protein adsorbed on these films than the negative protein. The interaction forces measured between a silica spherical surface on both "high"- and "low"-protein-fouling DGpp films were all repulsive and short ranged (2-3 nm). There was no correlation between the surface forces measured for high- and low-protein-fouling DGpp films. Thus, it appears that enthalpic effects are very important in reducing protein adsorption. We therefore conclude that it is the concentration of residual, ethylene glycol containing species that are the crucial parameter determining protein resistance due to a combination of both entropic and enthalpic effects.     

Gas permeation and positron annihilation lifetime spectroscopy of poly(ether imides) containing main chain ethylene oxide segments

This article reports a study of four poly(ether imide)s with varying ethylene oxide (EO) segments lengths using positron annihilation lifetimes spectroscopy, wide angle X‐ray diffraction, and gas transport measurements. The measured properties change with the length of the EO segment. Comparison of the poly(ether imide) containing a single ether linkage with those containing one and three EO units, show progressive changes of the permeability and diffusion coefficient with void size. However, when six EO units are incorporated into the polymer backbone certain of the observed trends are reversed. Incorporation of flexible EO segments in the polymer backbone allows changes in the chain–chain interactions which increases the packing density and changes the void size and influences the solubility coefficients leading to variation of the gas transport characteristics. Differences in the measured solubility parameters reflect the extent to which the gases molecules are able to interact with the polymer matrix. The highest values obtained for the gas separation for carbon dioxide and nitrogen is observed when EO has a value of three. Further increasing of the length of the EO segments in the poly(ether imide) leads to a reduction the gas transport properties and hence the extent to which gas separation would be achieved. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1654–1662     

Synthesis of amphiphilic copolymer brushes: Poly(ethylene oxide)‐graft‐polystyrene

A well‐defined amphiphilic copolymer brush with poly(ethylene oxide) as the main chain and polystyrene as the side chain was successfully prepared by a combination of anionic polymerization and atom transfer radical polymerization (ATRP). The glycidol was first protected by ethyl vinyl ether to form 2,3‐epoxypropyl‐1‐ethoxyethyl ether and then copolymerized with ethylene oxide by the initiation of a mixture of diphenylmethylpotassium and triethylene glycol to give the well‐defined polymer poly(ethylene oxide‐co‐2,3‐epoxypropyl‐1‐ethoxyethyl ether); the latter was hydrolyzed under acidic conditions, and then the recovered copolymer of ethylene oxide and glycidol {poly(ethylene oxide‐co‐glycidol) [poly(EO‐co‐Gly)]} with multiple pending hydroxymethyl groups was esterified with 2‐bromoisobutyryl bromide to produce the macro‐ATRP initiator [poly(EO‐co‐Gly)_(ATRP). The latter was used to initiate the polymerization of styrene to form the amphiphilic copolymer brushes. The object products and intermediates were characterized with ¹H NMR, matrix‐assisted laser desorption/ionization time‐of‐flight mass spectrometry, Fourier transform infrared, and size exclusion chromatography in detail. In all cases, the molecular weight distribution of the copolymer brushes was rather narrow (weight‐average molecular weight/number‐average molecular weight < 1.2), and the linear dependence of ln[M₀]/[M] (where [M₀] is the initial monomer concentration and [M] is the monomer concentration at a certain time) on time demonstrated that the styrene polymerization was well controlled. This method has universal significance for the preparation of copolymer brushes with hydrophilic poly(ethylene oxide) as the main chain. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4361–4371, 2006     

A general approach to controlling the surface composition of poly(ethylene oxide)-based block copolymers for antifouling coatings

To control the surface properties of a polystyrene-block-poly(ethylene oxide) diblock copolymer, perfluorinated chemical moieties were specifically incorporated into the block copolymer backbone. A polystyrene-block-poly[(ethylene oxide)-stat-(allyl glycidyl ether)] [PS-b-P(EO-stat-AGE)] statistical diblock terpolymer was synthesized with varying incorporations of allyl glycidyl ether (AGE) in the poly(ethylene oxide) block from 0 to 17 mol %. The pendant alkenes of the AGE repeat units were subsequently functionalized by thiol-ene chemistry with 1H,1H,2H,2H-perfluorooctanethiol, yielding fluorocarbon-functionalized AGE (fAGE) repeat units. (1)H NMR spectroscopy and size-exclusion chromatography indicated well-defined structures with complete functionalization of the pendant alkenes. The surfaces of the polymer films were characterized after spray coating by X-ray photoelectron spectroscopy (XPS) and near-edge X-ray absorption fine structure spectroscopy (NEXAFS), showing that the P(EO-stat-fAGE) block starts to compete with polystyrene to populate the surface after only 1 mol % incorporation of fAGE. Increasing the incorporation of fAGE led to an increased amount of perfluorocarbons on the surface and a decrease in the concentration of PS. At a fAGE incorporation of 8 mol %, PS was not detected at the surface, as measured by NEXAFS spectroscopy. Water contact angles measured by the captive-air-bubble technique showed the underwater surfaces to be dynamic, with advancing and receding contact angles varying by >20°. Protein adsorption studies demonstrated that the fluorinated surfaces effectively prevent nonspecific binding of proteins relative to an unmodified PS-b-PEO diblock copolymer. In biological systems, settlement of spores of the green macroalga Ulva was significantly lower for the fAGE-incorporated polymers compared to the unmodified diblock and a polydimethylsiloxane elastomer standard. Furthermore, the attachment strength of sporelings (young plants) of Ulva was also reduced for the fAGE-containing polymers, affirming their potential as fouling-release coatings.     

Photocrosslinkable second-order nonlinear optical polymers synthesized by cationic copolymerization

Photocrosslinkable second-order nonlinear optical (NLO) polymers were synthesized from cationic copolymerization of a vinyl ether monomer bearing 4′-nitrobiphenyl-4-oxy group as the NLO chromophore with a vinyl ether monomer bearing cinnamoyl group as the photoreactive moiety. To obtain a suitable poling method involving photocrosslinking, which is capable of inducing a higher and more stable second-order nonlinear coefficient, d₃₃, for NLO polymer films, some poling procedures were investigated. An optimized poling method was as follows. Ultraviolet (UV) irradiation is performed for 90 sec during poling at 50°C for 20 min, followed by poling at 150°C for 20 min. By using this poling method NLO polymer films exhibited a higher and considerably stable d₃₃ value at room temperature, even though they had rather lower glass transition temperatures before photocrosslinking. Some photocrosslinking mechanism for NLO polymers investigated here were considered.     

Poly(vinyl chloride)–poly(ethylene oxide) block copolymers: Synthesis and characterization

Poly(vinyl chloride)-poly(ethylene oxide) block copolymers have been synthesized in solution and emulsion. The polymers were made by first synthesizing macroazonitriles through the reaction of 4,4′-azobis-4-cyanovleryl chloride with hydroxy-terminated poly(ethylene oxide) of varying molecular weights. These macroazonitriles had molecular weights in the range of 3000–88,000 and degrees of polymerization from 5 to 24. Thermal decomposition of the azolinkages in the presence of vinyl chloride monomer yielded block copolymers containing form 2 to 20 wt % poly(ethylene oxide). The structures of the block copolymers were characterized by spectrometric, elemental and molecular weight analyses. The possibility of some graft polymerization occurring via free-radical extraction of a methylene hydrogen from the poly(ethylene oxide) was considered. Polymerization of vinyl chloride with an azonitrile initiator in the presence of a poly(ethylene oxide) yielded predominately homopolymer with some grafted poly(vinyl chloride).     

Synthesis and characterization of novel alternating fluorinated copolymers bearing oligo(ethylene oxide) side chains

The synthesis and characterization of novel poly(CTFE‐g‐oligoEO) graft copolymers [chlorotrifluoroethylene (CTFE) and ethylene oxide (EO)] are presented. First, vinyl ether monomers bearing oligo(EO) were prepared by transetherification of ω‐hydroxyoligo(EO) with ethyl vinyl ether catalyzed by a palladium complex in 70–84% yields. Two vinyl ethers of different molecular weights (three and 10 EO units) were thus obtained. Then, radical copolymerization of the above vinyl ethers with CTFE led to alternating poly(CTFE‐alt‐VE) copolymers that bore oligo(OE) side chains in satisfactory yields (65%). These original poly(CTFE‐g‐oligoEO) graft copolymers were characterized by ¹H, ¹⁹F, and ¹³C NMR spectroscopy. Their molecular weights reached 19,000 g mol^?1, and their thermal properties were investigated while their glass transition temperatures ranged between ?42 and ?36 °C. Their thermogravimetric analyses under air showed decomposition temperatures of 270 °C with 10% weight loss (T_d,10%). These novel copolymers are of potential interest as polymer electrolytes in lithium ion batteries, showing room temperature conductivities ranging from 4.49 × 10^?7 to 1.45 × 10^?6 S cm^?1 for unplasticized material. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Synthesis and characterization of new semifluorinated linear and hyperbranched poly(arylene ether phosphine oxide)s through B2 + A2 and AB2 approaches

A new phosphorus containing trifluoromethyl-activated bisfluoro B₂ monomer has been synthesized successfully by coupling reaction of 4-methoxyphenylphosphonic dichloride and the Grignard salt of 5-bromo-2-fluorobenzotrifluoride. This monomer was converted to linear poly(arylene ether phosphine oxide)s by nucleophilic displacement of the fluorine atom on the benzene ring with several diphenols. The B₂ monomer was further demethylated to form an AB₂ monomer which on self condensation yielded hyperbranched poly(arylene ether phosphine oxide) with identical phosphorous containing moiety. The products obtained exhibit weight-average molecular weights as high as 600,000 g mol⁻¹ in SEC. These linear and hyperbranched poly(arylene ether phosphine oxide)s showed thermal stability as high as 516 °C for 10% weight loss in TGA in nitrogen and showed glass transition temperatures up to 253 °C in DSC. All the polymers were soluble in a wide range of organic solvents, e.g., CHCl₃, THF, NMP and DMF, however, the hb sample showed a significant lower solution viscosity compared to linear samples of similar molar mass. Transparent thin films of linear poly(arylene ether phosphine oxide)s casted from dichloromethane exhibited tensile strengths up to 50 MPa, a modulus of elasticity up to 0.95 GPa and elongation at break up to 36% depending on their exact repeating unit structures. No free standing films could be prepared from the hb analogue due to the missing entanglements, but stable thin polymer films on silicon wafers with high hydrophobicity were formed which showed water contact angles as high as 91°.     

Synthesis and cationic photocuring of new carbazole monomers

New carbazole monomers were synthesized and their cationic photopolymerization investigated. The monomers contain in each molecule two pendant carbazole groups and two functional groups reactive towards cationic photopolymerization. The investigated reactive groups were epoxy, oxetane or vinyl ether. Each type of monomer contains a spacer group namely ethylene oxide segment. The UV curing kinetics of the different monomers was monitored by real time FT-IR (RT-FTIR) analysis and the thermal properties evaluated by DSC.     

Synthesis of amphiphilic block copolymer from optically active N-benzylprolinol acrylate

A vinyl monomer N-benzylprolinol acrylate has been synthesized from the available amino acid enantiomer L-proline via four stages. An optically active amphiphilic block copolymer capable of phase microsegregation in aqueous solutions has been synthesized through controlled free-radial polymerization of this monomer using poly(ethylene oxide) containing terminal 2-bromoisobutyrate groups as a macroinitiator.     

γ-Ray-induced copolymerization of carbon monoxide with cyclic ethers

The γ-ray copolymerization of carbon monoxide with cyclic ethers, such as ethylene oxide, phenyl glycidyl ether, 1,3-dioxolane, 2-vinyl-1,3-dioxolane, terahydrofuran, 1,4-dioxane, and acetaldehyde was studied. A yellowish or brownish powdery copolymer was obtained in most of the cases examined. The infrared spectra showed that copolymers containing the ester structural unit were produced in the copolymerization with cyclic ethers which have no vinyl groups, and that a copolymer containing a ketone structure was produced from cyclic ether having vinyl group. It was found that the copolymer with ethylene oxide also had a β-propiolactone ring structure at the chain end or the side chain. The copolymers were confirmed to be partially crystalline from the x-ray diffraction diagrams. Further, a ring-opening polymerizability of the cyclic ether by γ-radiation was discussed. And it was found that as the bond dissociation energy between the carbon–oxygen linkage of the cyclic ether is small, the polymer yield both in the homopolymerization and copolymerization with carbon monoxide is high. A mechanism for the copolymerization is proposed on the basis of the results.     

From an Epoxide Monomer Toolkit to Functional PEG Copolymers With Adjustable LCST Behavior

The lower critical solution temperature (LCST) behavior of novel poly(ethylene glycol) (PEG)‐based copolymers bearing multiple functional groups, obtained by anionic ring‐opening (co)polymerization (AROP), has been investigated. Variable comonomer ratios of ethylene oxide (EO) and the corresponding oxiranes isopropylidene glyceryl glycidyl ether (IGG), ethoxyl vinyl glycidyl ether (EVGE), allyl glycidyl ether (AGE), or N,N‐dibenzyl amino glycidyl (DBAG), particularly designed to implement functional groups at the PEG backbone, were found to influence the LCST behavior. Sharp transitions from translucent to opaque solutions, comparable to other well‐established stimuli‐responsive polymers, were observed at temperatures ranging from 9 to 82 °C. The influence of the side group hydrophobicity could be quantified by the comparison of the different copolymer systems observed.     

Synthesis and characterization of amphiphilic diblock copolymers of methyl tri(ethylene glycol) vinyl ether and isobutyl vinyl ether

Water-soluble diblock copolymers of methyl tri(ethylene glycol) vinyl ether (hydrophilic block) and isobutyl vinyl ether (hydrophobic block) of different molecular weights and composition were synthesized by living cationic polymerization. The molecular weight and comonomer composition of these copolymers were determined by GPC and ¹H NMR spectroscopy, respectively. Aqueous solutions of the copolymers were characterized in terms of their micellar behavior using dynamic light scattering, aqueous GPC, and dye solubilization. All the copolymers formed aggregates with the exception of a diblock copolymer with only two hydrophobic monomer units. The micellar hydrodynamic size scaled with the 0.61 power of the number of hydrophobic units, in good agreement with a theoretical exponent of 0.73. An increase in the length of the hydrophobic block at constant hydrophilic block length or an increase in the overall polymer size at constant block length ratio both resulted in lower critical micelle concentrations (cmcs). The cloud points of 1% w/w aqueous solutions of the polymers were determined by turbidimetry. An increase in the length of the hydrophobic block at constant hydrophilic block length caused a decrease in the cloud points of the copolymers. However, an increase in the overall polymer size at constant block length ratio led to an increase in the cloud point. © 1996 John Wiley & Sons, Inc.     

Polyether nanoparticles from covalently crosslinked copolymer micelles

Double hydrophilic block copolymers poly(ethylene oxide)-b-polyglycidol were synthesized using living anionic polymerization. The polyglycidol blocks were made hydrophobic by the esterification of a part of hydroxyl groups with cinnamic acid, thus simultaneously attaching UV-sensitive double bonds to the polymer backbone. The block copolymers were found to spontaneously associate in aqueous solution forming well-defined micelles, where the corona of the micelles was formed of EO units and the cores consisted of hydrophobic glycidyl cinnanamate units. The critical micelle concentration was determined by light-scattering measurements and fluorescence spectroscopy. Stabilization of micelles was obtained by covalently crosslinking the cores of polyether micelles formed from amphiphilic block copolymers of the type poly(ethylene oxide)-b-poly(glycidol-co-glycidyl cinnamate) (denoted EO(113)-b-(Gl(33)-co-GlCA(33-x))). To obtain stable nanoparticles double bonds of cinnamate units contained in core were crosslinked under UV irradiation. The kinetics of the stabilization process was investigated using SEC-MALLS and UV spectroscopy. The parameters of the micelles and nanogels were calculated from the light-scattering data.     

Ion‐Conductive Properties of a Polymer Electrolyte Based on Ethylene Carbonate/Ethylene Oxide Random Copolymer

A random copolymer of ethylene oxide with CO₂, namely, poly(ethylene carbonate/ethylene oxide) (P(EC/EO)), has been synthesized as a novel candidate for polymer electrolytes. Electrolyte composed of P(EC/EO) and lithium bis(fluorosulfonyl)imide has an ionic conductivity of 0.48 mS cm⁻¹ and a Li transference number (t ₊) of 0.66 at 60 °C. To study ion‐conductive behavior of P(EC/EO)‐based electrolytes, the Fourier transform infrared (FT‐IR) technique is used to analyze the interactions between Li⁺ and functional groups of the copolymer. The carbonate groups may interact preferentially with Li⁺ rather than the ether groups in P(EC/EO). This study suggests that copolymerization of carbonate and flexible ether units can realize both high conductivity and t ₊ for polymer electrolytes. High‐performance P(EC/EO) electrolyte is expected to be a candidate material for use in all‐solid‐state batteries.

     

Pulsed Plasma Polymerization of Cyclic Ethers: Production of Biologically Nonfouling Surfaces

Polymerization of low molecular weight cyclic ethers was investigated under pulsed plasma conditions. Film formation conditions were adjusted to optimize retention of ethylene oxide (EO) content of the monomers in the resultant plasma generated polymers. To a large extent this goal was achieved with the 12-crown-4 and 15-crown-5 monomers, but not with dioxane. Films obtained from the 12-crown-4 monomer under ultra low power inputs are shown to be highly resistant to protein adsorption, while exhibiting good chemical compositional stability and adhesion during prolonged immersion in aqueous solutions. The dramatic differences observed in contrasting polymer film compositions from 12-crown-4 and dioxane are believed to arise from distinctive differences in the low electron impact fragmentation patterns of these two compounds, as discussed in this report.     

Alternating copolymerization of 2,3-dichloro-5,6-dicyano-p-benzoquinone with styrene and polymerization behavior with vinyloxy compounds

2,3-Dichloro-5,6-dicyano-p-benzoquinone (DDQ) was found to copolymerize alternatingly with styrene (St). DDQ–isobutyl vinyl ether and DDQ–2-chloroethyl vinyl ether systems gave homopolymers of vinyl ethers, while DDQ–phenyl vinyl ether and DDQ–vinyl acetate systems gave oligomers containing both monomer units. In the terpolymerization of DDQ, p-chloranil (pCA), and St, terpolymers obtained were found to have about 50 mole % of St units regardless of monomer feed ratio and DDQ was incorporated much more rapidly into the terpolymer than pCA. The difference in the reactivity of the acceptor monomers could be attributed to that in their electron-accepting character.