一种新的催化方法：微波辐射-酶耦合成催化有机合成

微波辐射和酶催化是现代有机合成化学中两种强有力的催化手段。目前一种新 的研究动向是将两者结合起来用于催化有机合成反应,这种新型催化方法可以被称 作微波辐射-酶耦合催化（MIECC）。由MIECC方法催化的有机合成反应可以被分为 湿法和干法两大类型。介绍了这一新型耦合催化方法的研究进展以及一些典型 MIECC反应。对MIECC反应中可能存在的耦合催化机理,即微波在生物催化体系中的 “非热效应“进行了初步理论探讨,同时展望了这种新的耦合催化方法的前景。     

微波加热和常规加热下功能化离子液体催化合成丁二酸二辛酯

分别在微波辐射和常规加热下,以具有丙烷磺酸基功能基团的离子液体为催化剂催化丁二酸和正辛醇 合成丁二酸二辛酯,考察了其阴、阳离子对催化剂活性的影响.相比常规加热,微波加热提高了反应效率,缩短了反应时间.以[ PyPS]HSO4为催化剂,研究了催化剂用量、醇酸比和反应时间对酯化率的影响.结果表明:当催化剂用量为丁二酸的3wt％,酸醇比(丁二酸∶正辛醇)1∶4,反应温度150℃,反应时间15 min,功率400W时,酯化率达到95.74％.此外,微波辐射下[PyPS]HSO4催化剂重复使用6次后活性没有明显降低,酯化率仍有93.58％.     

微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果.本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响.在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论.     

微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果.本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响.在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论.     

微波辐射-酶耦合催化(MIECC)反应

将微波辐射用于非水相酶催化可以获得很多有别于常规加热下的反应结果。本文讨论了微波的非热效应在酶促反应中的表现,探讨了微波辐射对酶的结构、构象、活性及酶催化反应动力学的影响,以及微波辐射-酶耦合催化对反应的对映选择性、底物专一性、前手性选择性和区域选择性的影响。在大多数场合,适当的微波辐射不会损伤酶活而且可以提高反应速率,而对酶特异性的影响则不一而论。     

微波促进酸性离子液体催化水杨酸酯化

用自制的硫酸氢1-甲基-3-(3-磺酸基丙基)咪唑([MIMPS]HSO4)酸性离子液体作为水杨酸与醇的酯化反应催化剂,考察了温度、时间、物料配比和离子液体用量等因素对酯化反应的影响,优化的最佳反应条件为: 微波辐射时间20 min,反应温度95 ℃,醇与酸摩尔比3∶1(水杨酸的量为0.02 mol),[MIMPS]HSO4用量10 mmol,水杨酸甲酯的产率和选择性分别为91.9%和99.0%。 离子液体回收循环使用4次,催化效率不变。 与热催化酯化反应相比,微波辐射可缩短反应时间;水杨酸与不同碳链醇的酯化产率随着碳链的增加而降低,同碳链的伯醇酯化率比仲醇高。     

微波辐射固体酸催化合成马来酸双酯

首次在微波辐射下，用活性炭固载对甲苯磺酸催化合成了马来酸双酯．当微波辐射功率为150W．正辛醇：酸酐＝3：1，催化剂用量为2．5g时，反应20min后，马来酸酐转化率达89．8％，产物的选择性为99．5％．同时，也发现随着醇的炭数增多，反应温度和反应速率增加；在微波辐射条件下，酯化反应速率、产物选择性都高于常规加热方式下的反应结果．     

微波辐射下纳米CeO2催化合成氯乙酸乙酯

微波辐射下,纳米CeO2催化氯乙酸和无水乙醇反应合成了氯乙酸乙酯.经正交试验优选出的最佳反应条件为:氯乙酸200 mmol,n(元水乙醇):n(氯乙酸)=2:1,w(CeO2)=1.0%,500 W微波辐射下反应8 min,酯化率98%.     

微波辐射对酶促合成甘油酯位置选择性的影响

研究了微波辐射和常规加热下脂肪酶Novozyme 435催化甘油与n-辛酸的反应。在2种加热模式下,n-辛酸与甘油反应的初速度随着反应温度(50~75℃)的升高而加快;同样条件下,微波辐射下的反应初速度略高于常规加热条件下的。微波辐射的产物中的2-单甘酯和1,2-二甘酯的含量增加,但仍明显低于1-单甘酯和1,3-二甘酯的含量,即微波辐射并未根本改变脂肪酶的1,3-专一性;但实验条件下微波辐射均削弱了Novozyme 435的1,3-专一性:微波辐射反应产物中1-单甘酯与2-单甘酯的量比由常规加热下的26.9~43.4下降为16.2~40.4,其中1,3-二甘酯与1,2-二甘酯的量比亦由10.5~19.6降为7.6~15.3。     

有机相中固定化脂肪酶催化合成植物甾醇酯

酶法合成植物甾醇酯具有反应条件温和、产物纯度和产量高等优点,但非水相酶催化的活性和稳定性普遍较低.本文以大孔树脂固定化脂肪酶为催化剂,并在催化过程中添加乳糖的类似物,构建了有机相高效合成植物甾醇酯的工艺过程.以酯化率为考察指标,对脂肪酶和反应溶剂进行筛选,对酯化条件进行优化,同时考察了糖的种类及添加量对酶催化性能的影响.结果表明,大孔树脂NKA吸附固定化的褶皱假丝酵母(Candida rugosa)脂肪酶(NKA-CRL)为最适宜的催化剂,以正己烷为反应介质,在酸醇摩尔比为2和添加酶蛋白质量7.5%的海藻糖的条件下,40°C反应10 h,酯化率达到96.6%.连续6次催化后,植物甾醇的酯化率仍维持在85.0%以上.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.