Charge transfer complexes as dual thermal/photo initiators for free-radical frontal polymerization

Frontal polymerization is a process in which a localized reaction zone propagates from the coupling of thermal transport and the Arrhenius rate dependence of an exothermic polymerization; monomer is converted into polymer as the front passes through an unstirred medium. Herein we report the first study of charge transfer complexes (CTCs) as photo/thermal initiators for free-radical frontal polymerization. Front velocity was studied as a function of mole ratio between an aromatic amine, such as dimethyl-p-toluidine or dimethylaniline, and an iodonium salt. It was found that the front velocity reached a maximum at a certain mole ratio of amine to iodonium salt. The velocity remained constant upon increasing the ratio of amine to iodonium salt past this critical ratio. Fronts were also studied using N-phenyl glycine as an electron donor, but its utility was limited by low solubility. Lastly, the steric and electronic effects of the iodonium salt and counter anion were explored. It was found that CTCs using iodonium salts with less nucleophilic anions gave higher front velocities. In terms of intrinsic reactivity, the CTC composed of N,N-dimethyl-p-toluidine and bis[4-(tert-butyl)phenyl]iodonium tetra(nonafluoro-tert-butoxy)aluminate gave the highest front velocity per molal of iodonium salt.     

A Selective C−H Deprotonation Strategy to Access Functionalized Arynes by Using Hypervalent Iodine

Described here is an efficient method to access highly functionalized arynes from unsymmetrical aryl(mesityl)iodonium tosylate salts. The iodonium salts are prepared in a single pot from either commercially available aryl iodides or arylboronic acids. The aryne intermediates are generated by ortho‐C?H deprotonation of aryl(mesityl)iodonium salt with a commercially available amide base and trapped in a cycloaddition reaction with furan in moderate to good yields. Coupling partners for the aryne intermediates beyond furan are also described, including benzyl azide and alicyclic amine nucleophiles. The regio‐ and chemoselectivity of this reaction is discussed and evidence for the spectator aryl ligand of the iodonium salt as a critical control element in selectivity is presented.     

Reactions of cyclohexenyl iodonium tetrafluoroborate with bromide ion: retardation due to the formation of lambda3-bromoiodane

The reaction of 4-tert-butylcyclohex-1-enyl(phenyl)iodonium tetrafluoroborate (1a) and the 4-chlorophenyl derivative (1b) with bromide ion was examined in methanol, acetonitrile, and chloroform. Products include those derived from the intermediate cyclohexenyl cation as well as 1-bromocyclohexene. Kinetic measurements show that the reaction of 1 is strongly retarded by the added bromide. The curved dependence of the observed rate constant on the bromide concentration is typical of a pre-equilibrium formation of the intermediate adduct with a fast bromide-independent reaction (solvolysis of the iodonium ion). The formation of the adduct, lambda3-bromoiodane, was also confirmed by the UV spectral change. The relative reactivity of the iodonium ion and lambda3-bromoiodane is evaluated to be on the order of 10(2). The bromide substitution product forms both via the S(N)1 reaction of the free iodonium ion and via the ligand coupling of the iodane.     

Michael addition-elimination mechanism for nucleophilic substitution reaction of cycloalkenyl iodonium salts and selectivity of 1,2-hydrogen shift in cycloalkylidene intermediate

Reactions of cyclohexenyl and cyclopentenyl iodonium salts with cyanide ion in chloroform give cyanide substitution products of allylic and vinylic forms. Deuterium-labeling experiments show that the allylic product is formed via the Michael addition of cyanide to the vinylic iodonium salt, followed by elimination of the iodonio group and 1,2-hydrogen shift in the 2-cyanocycloalkylidene intermediate. The hydrogen shift preferentially occurs from the methylene rather than the methine beta-position of the carbene, and the selectivity is rationalized by the DFT calculations. The Michael reaction was also observed in the reaction of cyclopentenyliodonium salt with acetate ion in chloroform. The vinylic substitution products are ascribed to the ligand-coupling (via lambda3-iodane) and elimination-addition (via cyclohexyne) pathways.     

Stereoselective synthesis of (Z)-2-fluoro-1-alkenyl(phenyl)iodonium tetrafluoroborates

[reaction: see text] (Z)-2-Fluoro-1-alkenyl(phenyl)iodonium salts were stereoselectively prepared by the reaction of alkynyl(phenyl)iodonium salts with aqueous HF in good yields. The method is applicable to the synthesis of fluoroalkenyliodonium salts having functional groups such as ketone, ester, and chloride. (Z)-2-Fluoro-1-alkene, (Z)-2-fluoro-2-alkenoate, and (Z)-beta-fluoroenyne could be stereoselectively prepared from the fluoroalkenyliodonium salt.     

Conversion of Ca2+ salt of an organic compound to its Li+ salt to simplify the fast atom bombardment mass spectrum

The FAB mass spectrum of the Ca(2+) salt of RK-682 (1, MW 368), a potent protein tyrosine phosphatase inhibitor, shows a complex pattern due to Ca(2+) adduct ions with multimers of 1 and their decomposition ions. Addition of LiCl greatly simplified the FAB mass spectrum, providing a prominent Li(+) adduct ion of 1 at m/z 381 [M+2Li-H](+). The addition of LiCl also greatly simplified the FAB mass spectrum of calcium pantothenate. This approach may be generally useful for molecular weight determination of multivalent metal salts of organic compounds, or organic compounds that can form Li salts, by FAB mass spectrometry.     

Alkynylation of benzotriazole with silylethynyliodonium triflates. Regioselective synthesis of 2-ethynyl-2H-benzotriazole derivatives

Phenyl(trimethylsilylethynyl)iodonium and tert-butyldimethylsilylethynyl(phenyl)iodonium triflates were applied to alkynylation of benzotriazole. Treatment of the silylethynyliodonium triflates with the potassium salt of benzotriazole ion in (t)BuOH and CH(2)Cl(2) gave 2-(trimethylsilylethynyl)-2H-1,2,3-benzotriazole and 2-(tert-butyldimethylsilylethynyl)-2H-1,2,3-benzotriazole in 74% and 76% yields, respectively. The regioisomers, 1-silylethynyl-1H-1,2,3-benzotriazole derivatives, were minor. In both cases of the silyl-substitued ethynyliodonium salts, novel regioselective alkynylation of benzotriazole at the 2 position was observed.     

香豆素酮类化合物的瞬态研究——Ⅲ.香豆素酮和碘鎓盐间的电子转移

本工作采用激光闪光光解法对香豆素酮类化合物敏化碘鎓盐化合物问题进行了研究。结果表明:碘鎓盐化合物能通过电子转移机理猝灭香豆素酮的激发三重态。工作中还用甲基紫精(PQ²⁺)为模型化物,观察到它也能使香豆素酮的三重态猝灭,同时可看到在位于610nm处的PQ⁺生成。这些结果说明,在发生电子转移的反应中香豆素酮是电子给体,按Weller公式的计算结果也表明它们之间可发生电子转移反应。     

Interactions of inorganic salts with poly(ethylene oxide)

Evidence is presented for the interaction of metal salts such as potassium iodide with polyethers such as poly(ethylene oxide). This interaction is sufficiently marked that the incorporation of 10–30% of the salt in the bulk polymer markedly reduces crystallinity while retaining compatibility. Examination of electroviscous effects in methanol demonstrates that the salt–polymer adduct behaves as a typical polyelectrolyte at low salt concentrations, while the polymer in absence of salt is essentially insoluble in methanol at room temperature. Measurements of the equilibrium between salt and polymer along with a study of various molecular weight polymers strongly suggest that one salt molecule associates with about nine ethylene oxide units. It is proposed that the association is due to an ion–dipole interaction, and the anion is tentatively postulated as the species directly associating with the polymer. The association of other metal salts and other polymers are interpreted in this light. The significance of these results in interpreting salting-in phenomena is also discussed.     

Laser desorption mass spectrometry of squaric acid and its salts

The laser desorption mass spectrometry of the oxocarbon squaric acid (3,4-dihydroxy-3-cyclobutene-1,2-dione) and its salts of the form A₂C₄O₄ (A = cation) is described. Both positive and negative ion spectra were obtained. The positive ion spectrum of the acid is characterized by an ion corresponding to loss of CO from [M + H]⁺. The negative ion spectrum shows an intense [M ? H]^? peak in addition to a dimer species. The alkali salt spectra contain [M + A]⁺ in the positive mode and [M ? A]^? and an intense [C₄HO₄]^? in the negative mode. The smaller alkali salts also have an [M + H]⁺ adduct ion. Unlike the alkali squarates, the ammonium salt shows ions corresponding to losses of neutrals from the molecular adduct in the positive ion spectrum and a dimer species in the negative ion spectrum. Molecular weight information was obtained in all cases. A (bis) dicyanomethylene derivative of potassium squarate was also studied. Some field desorption mass spectrometry results are presented for comparison.     

Click maltose as an alternative to reverse phase material for desalting glycopeptides

Desalting peptides before mass spectrometry analysis is important because salts lead to adduct formation, increased chemical noise and ion suppression effect. A high concentration of salt can clog nanoelectrospray ionization (ESI) emitters. The reverse phase C18 material is commonly used to desalt peptides because of its high binding capacity. However, peptides with high hydrophilicity, such as glycopeptides, are not retained well on this material, resulting in the loss of peptide information. To improve the efficiency of glycopeptide desalting, we introduced a hydrophilic interaction chromatography (HILIC)-based material named click maltose. Four glycoproteins, horseradish peroxidase (HRP), human serum immunoglobulin G (IgG), bovine ribonuclease B (RNase B), and α-1 acid glycoprotein (AGP) were chosen as models and their glycopeptides were desalted with click maltose, AQ C18, Empore C18 and ZipTip C18. Click maltose as a HILIC material exhibited better performance than the other three C18 materials for both number of targeted glycopeptides and their corresponding intensities. In addition, accurate glycopeptide profiling was achieved with click maltose desalting regardless of peptide lengths and glycan types.     

呫吨染料－双(二苯基碘鎓盐)在高分子膜中的光谱和光化学特性

近年来,在迅速发展的新材料中,许多品种是与激光技术和光化学反应密切相关的。而目前使用最多的光源为氩离子激光,He-Ne激光和半导体激光,因此开发可见光和近红外区有灵敏响应的光敏体系已成为十分迫切的问题。由于染料品种多,易得到,具有广泛的可选择性,因而染料光敏化反应体系再度引起人们的重视。     

荧烷染料/二芳基碘鎓盐同步光生色和光聚合体系

荧烷染料(FR)和二芳基碘盐(On⁺X^-)组成的体系,在光作用下,通过激发态的荧烷染料与碘盐之间发生电子转移反应,生成开环结构的荧烷染料有色体,伴随发生盐的光解反应,生成活性引发自由基碎片。该体系不仅可有效地引发烯类单体的聚合反应,也可同步发生光生色作用,产生较高的色密度。进一步研究了二芳基碘盐的取代基不同碳链长度和不同对离子及浓度诸因素,在光固化体系中对生色反应的影响。同时FR/On⁺X^-体系引发光交联形成的有色薄膜具有良好的色稳定性。     

Methacrylic silicon-containing tercopolymers for chemically amplified resists

Tercopolymers of methyl methacrylate with methacrylic acid and dimethylphenyl (methyldiphenyl)silyl methacrylates are synthesized and investigated as components of chemically amplified resistive formulations with sulfonium and iodonium salts as photoacid generators for UV lithography in the 254-nm range. The surface behavior and the kinetics of dissolution of resistive films in an aqueous solution of tetraethylammonium hydroxide in relation to the concentration of onium salts and the temperatures of postapply and postexposure bakes are studied. The introduction of sulfonium salt into the resistive formulation brings about an increase in the solubility of unexposed films, thereby erasing the difference in dissolution rates of exposed and unexposed areas of a resist and preventing image formation. The iodonium salt plays the role of an inhibitor for dissolution of unexposed films of both copolymers, which makes it possible to obtain a high-contrast positive image in resists.     

Synthesis and study of iodonium borate salts as photoinitiators

Iodonium butyltriphenylborate salts (A I⁺ Ar′Ph₃B⁻ R), (Bu) were found to be more efficient than iodonium tetraphenylborate salts (RPh) when used as photoinitiators for the polymerization of acrylates. Relative photodecomposition rates were also different. It was found from a study of the photoreaction of iodonium borate salts with a model monomer, methyl methacrylate, that iodonium butyltriphenylborate salts simultaneously produce a butyl radical from the borate anion and an aryl radical from the iodonium cation upon irradiation. Both radicals initiate polymerization. Iodonium tetraphenylborate salts were found to release an aryl radical, but only from the iodonium cation. Iodonium borate salts exhibit strong absorption below 300 nm with a tail absorption above 400 nm. Thus, iodonium butyltriphenyl borate salts are efficient photoinitiators even when used with visible light. When a photosensitizer such as 5,7-diiodo-3-butoxy-6-fluorone is employed, iodonium butyltriphenylborate salts are rendered much more efficient for visible light photopolymerization. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1667–1677, 1998     

Type I and type II sensitizers based on Rose Bengal onium salts

Abstract— New Rose Bengal oniurn salts containing one or two iodonium, sulfonium, phosphonium, and pyrylium ions have been prepared as part of a program to develop sensitizers which can function as Type I radical photoinitiators and Type II energy transfer donors depending on experimental conditions. The absorption spectra of the onium salts in different solvents indicate an equilibrium between tight and loose ion pairs which depends on the solvent polarity, the cation and concentration. Typical Rose Bengal photochemistry requires the structure be that of the loose ion pair in the solvent of choice. Similar factors also influence bleaching behavior, and bleaching is the result of electron transfer processes. The quantum yields of singlet oxygen production from the onium salts in polar solvents are similar to that of the parent, Rose Bengal disodium salt.     

Measuring salty samples without adducts with MALDI MS

Matrix-assisted laser desorption/ionization (MALDI) mass spectrometry (MS) has been used for the discovery of hundreds of novel cell to cell signaling peptides. Beyond its advantages of sensitivity and minimal sample preparation requirements, MALDI MS is attractive for biological analyses as high quality mass spectra may be obtained directly from specific locations within prepared tissue sections. However, due to the large quantity of salts present in physiological tissues, these mass spectra often contain many adducts of cationic salts such as sodium and potassium, in addition to the molecular ion [M + H]⁺. To reduce the presence of cation adducts in MALDI mass spectra obtained directly from tissues, we present a methodology that uses a slow condensation procedure to enable the formation of distinct regions of matrix/analyte crystals and cation (salt) crystals. Secondary ion mass spectrometric imaging suggests that the salts and MALDI matrix undergo a mutually exclusive crystallization process that results in the separation of the salts and matrix in the sample.     

The participation of the anion and alkyl substituent of diaryliodonium salts in photo‐initiated cationic polymerization reactions

The photo‐initiated cationic polymerization (PCP) of epoxides using diaryliodonium salt photoacid generators (PAGs) bearing alkyl groups and anions was investigated. The properties and reactivities of a series of iodonium salts containing various cations and anions were compared in the context of a PCP reaction. The products from the decomposition of the cations of these salts were analyzed using gas chromatography‐mass spectrometry (GC‐MS) spectra. The relationship between the molecular structure of the salts and their reaction mechanism in the PCP reaction was investigated. Based on the results of the investigation, it was concluded that the structures of the cations and anions of theiodonium salts affect the PCP reaction rate, which was controlled by the products from the diaryliodonium salts. As part of an additional investigation, the diaryliodonium salts‐epoxide materials were applied to 254 nm‐photo‐patterning. Copyright © 2006 John Wiley & Sons, Ltd.     

The Competition of Charge Remote and Charge Directed Fragmentation Mechanisms in Quaternary Ammonium Salt Derivatized Peptides—An Isotopic Exchange Study

Derivatization of peptides as quaternary ammonium salts (QAS) is a promising method for sensitive detection by electrospray ionization tandem mass spectrometry (Cydzik et al. J. Pept. Sci. 2011, 17, 445–453). The peptides derivatized by QAS at their N-termini undergo fragmentation according to the two competing mechanisms – charge remote (ChR) and charge directed (ChD). The absence of mobile proton in the quaternary salt ion results in ChR dissociation of a peptide bond. However, Hofmann elimination of quaternary salt creates an ion with one mobile proton leading to the ChD fragmentation. The experiments on the quaternary ammonium salts with deuterated N-alkyl groups or amide NH bonds revealed that QAS derivatized peptides dissociate according to the mixed ChR-ChD mechanism. The isotopic labeling allows differentiation of fragments formed according to ChR and ChD mechanisms.     

含无机盐和尿素的直链烷基苯磺酸钠浓溶液的粘度性质

含无机盐和尿素的直链烷基苯磺酸钠浓溶液的粘度性质王镜和（汕头大学化学系,汕头,５１５０６３）关键词无机盐,尿素,直链烷基苯磺酸钠,粘度性质低切速下的粘度是洗涤液的重要技术指标。常见此类制品是直链烷基苯磺酸钠（ＳＬＡＢＳ）浓溶液,通常以无机盐为增粘剂,...