Ligand exchange reactions on Au(38) and Au(40) clusters: a combined circular dichroism and mass spectrometry study

The thiolate-for-thiolate ligand exchange reaction between the stable Au(38)(2-PET)(24) and Au(40)(2-PET)(24) (2-PET: 2-phenylethanethiol) clusters and enantiopure BINAS (BINAS: 1,1'-binaphthyl-2,2'-dithiol) was investigated by circular dichroism (CD) spectroscopy in the UV/vis and MALDI mass spectrometry (MS). The ligand exchange reaction is incomplete, although a strong optical activity is induced to the resulting clusters. The clusters are found to be relatively stable, in contrast to similar reactions on [Au(25)(2-PET)(18)](-) clusters. Maximum anisotropy factors of 6.6 × 10(-4) are found after 150 h of reaction time. During the reaction, a varying ratio between Au(38) and Au(40) clusters is found, which significantly differs from the starting material. As compared to Au(38), Au(40) is more favorable to incorporate BINAS into its ligand shell. After 150 h of reaction time, an average of 1.5 and 4.5 BINAS ligands is found for Au(38) and Au(40) clusters, respectively. This corresponds to exchange of 3 and 9 monodentate 2-PET ligands. To show that the limited exchange with BINAS is due to the bidentate nature of the ligand, exchange with thiophenol was performed. The monodentate thiophenol exchange was found to be faster, and more ligands were exchanged when compared to BINAS.     

Magic-numbered Au(n) clusters protected by glutathione monolayers (n = 18, 21, 25, 28, 32, 39): isolation and spectroscopic characterization

Small gold clusters (<1 nm) protected by a glutathione (GSH) monolayer were fractionated into six components by polyacrylamide gel electrophoresis, and their chemical compositions were investigated by electrospray ionization mass spectroscopy. The results demonstrate isolation of a series of magic-numbered gold clusters, Au18(SG)11, Au21(SG)12, Au25+/-1(SG)14+/-1, Au28(SG)16, Au32(SG)18, and Au39(SG)23. Their optical absorption spectra are highly structured with clear absorption onsets, which shift toward higher energies with reduction of the core size. These molecular-like gold clusters exhibit visible photoluminescence. The results reported herein provide helpful guidelines or starting points for further experimental and theoretical studies on structures, stabilities, and optical properties of monolayer-protected gold clusters.     

Synthesis and electrochemical and spectroscopic characterization of biicosahedral Au25 clusters

The synthesis and electrochemical and spectroscopic characterization of biicosahedral Au(25) clusters with a composition of [Au(25)(PPh(3))(10)(thiolate)(5)Cl(2)](2+) are described. The biicosahedral Au(25) clusters protected with various types of thiol ligands including alkanethiols, 2-phenylethanethiol, 11-mercaptoundecanoic acid, and 11-mercapto-1-undecanol were synthesized in high yields using a one-step, one-phase procedure in which Au(PPh(3))Cl is reduced with tert-butylamine-borane in the presence of the thiol ligand in a 3:1 v/v chloroform/ethanol solution. All biicosahedral Au(25) clusters prepared exhibit characteristic optical absorption and photoluminescence properties. The emission energy is found to be substantially smaller than the optical absorption energy gap of 1.82 eV, indicating a subgap energy luminescence. The electrochemical HOMO-LUMO gap (~1.54 eV) of the clusters is also substantially smaller than the optical absorption energy gap but rather similar to the emission energy. These electrochemical and optical properties of the biicosahedral Au(25) clusters are distinctly different from those of the Au(25)(thiolate)(18) clusters.     

Glutathione-protected gold clusters revisited: bridging the gap between gold(I)-thiolate complexes and thiolate-protected gold nanocrystals

Small gold clusters (approximately 1 nm) protected by molecules of a tripeptide, glutathione (GSH), were prepared by reductive decomposition of Au(I)-SG polymers at a low temperature and separated into a number of fractions by polyacrylamide gel electrophoresis (PAGE). Chemical compositions of the fractionated clusters determined previously by electrospray ionization (ESI) mass spectrometry (Negishi, Y. et al. J.Am. Chem. Soc. 2004, 126, 6518) were reassessed by taking advantage of freshly prepared samples, higher mass resolution, and more accurate mass calibration; the nine smallest components are reassigned to Au10(SG)10, Au15(SG)13, Au18(SG)14, Au22(SG)16, Au22(SG)17, Au25(SG)18, Au29(SG)20, Au33(SG)22, and Au39(SG)24. These assignments were further confirmed by measuring the mass spectra of the isolated Au:S(h-G) clusters, where h-GSH is a homoglutathione. It is proposed that a series of the isolated Au:SG clusters corresponds to kinetically trapped intermediates of the growing Au cores. The relative abundance of the isolated clusters was correlated well with the thermodynamic stabilities against unimolecular decomposition. The electronic structures of the isolated Au:SG clusters were probed by X-ray photoelectron spectroscopy (XPS) and optical spectroscopy. The Au(4f) XPS spectra illustrate substantial electron donation from the gold cores to the GS ligands in the Au:SG clusters. The optical absorption and photoluminescence spectra indicate that the electronic structures of the Au:SG clusters are well quantized; embryos of the sp band of the bulk gold evolve remarkably depending on the number of the gold atoms and GS ligands. The comparison of these spectral data with those of sodium Au(I) thiomalate and 1.8 nm Au:SG nanocrystals (NCs) reveals that the subnanometer-sized Au clusters thiolated constitute a distinct class of binary system which lies between the Au(I)-thiolate complexes and thiolate-protected Au NCs.     

Organic-soluble fluorescent Au8 clusters generated from heterophase ligand-exchange induced etching of gold nanoparticles and their electrochemiluminescence

A unique heterophase ligand exchange induced etching process was used to transform gold nanoparticles into organic-soluble fluorescent gold clusters which were assigned to Au(8) by optical spectroscopy and MALDI-TOF mass spectrometry. Both the annihilation electrochemiluminescence of fluorescent Au(8) clusters in organic solution and the coreactant electrochemiluminescence of Au(8) cluster film in aqueous solution were studied.     

Chromatographic isolation of "missing" Au55 clusters protected by alkanethiolates

We report on the first synthesis of alkanethiolate-protected Au55 (11 kDa), which has been a "missing" counterpart of Schmid's Au55(PR3)12Cl6. Au:SCx clusters (x = 12, 18) were prepared by the reaction of alkanethiol (CxSH) with polymer-stabilized Au clusters ( approximately 1.3 nm) and subsequently incubated in neat CxSH. The resulting clusters were successfully fractionated by recycling gel permeation chromatography into Au approximately 38:SCx and Au approximately 55:SCx and identified by laser-desorption ionization mass spectrometry. The Au approximately 55:SCx clusters exhibited structured optical spectra, suggesting molecular-like properties. The thiolate monolayers were found to be liquid-like on the basis of the IR spectrum and the monolayer thickness, which was estimated from the hydrodynamic diameter.     

Facile syntheses of monodisperse ultrasmall Au clusters

During our effort to synthesize the tetrahedral Au20 cluster, we found a facile synthetic route to prepare monodisperse suspensions of ultrasmall Au clusters AuN (N < 12) using diphosphine ligands. In our monophasic and single-pot synthesis, a Au precursor ClAu(I)PPh3 (Ph = phenyl) and a bidentate phosphine ligand P(Ph)2(CH2)(M)P(Ph)2 are dissolved in an organic solvent. Au(I) is reduced slowly by a borane-tert-butylamine complex to form Au clusters coordinated by the diphosphine ligand. The Au clusters are characterized by both high-resolution mass spectrometry and UV-vis absorption spectroscopy. We found that the mean cluster size obtained depends on the chain length M of the ligand. In particular, a single monodispersed Au11 cluster is obtained with the P(Ph)2(CH2)3P(Ph)2 ligand, whereas P(Ph)2(CH2)(M)P(Ph)2 ligands with M = 5 and 6 yield Au10 and Au8 clusters. The simplicity of our synthetic method makes it suitable for large-scale production of nearly monodisperse ultrasmall Au clusters. It is suggested that diphosphines provide a set of flexible ligands to allow size-controlled synthesis of Au nanoparticles.     

Interstaple dithiol cross-linking in Au25(SR)18 nanomolecules: a combined mass spectrometric and computational study

A systematic study of cross-linking chemistry of the Au(25)(SR)(18) nanomolecule by dithiols of varying chain length, HS-(CH(2))(n)-SH where n = 2, 3, 4, 5, and 6, is presented here. Monothiolated Au(25) has six [RSAuSRAuSR] staple motifs on its surface, and MALDI mass spectrometry data of the ligand exchanged clusters show that propane (C3) and butane (C4) dithiols have ideal chain lengths for interstaple cross-linking and that up to six C3 or C4 dithiols can be facilely exchanged onto the cluster surface. Propanedithiol predominately exchanges with two monothiols at a time, making cross-linking bridges, while butanedithiol can exchange with either one or two monothiols at a time. The extent of cross-linking can be controlled by the Au(25)(SR)(18) to dithiol ratio, the reaction time of ligand exchange, or the addition of a hydrophobic tail to the dithiol. MALDI MS suggests that during ethane (C2) dithiol exchange, two ethanedithiols become connected by a disulfide bond; this result is supported by density functional theory (DFT) prediction of the optimal chain length for the intrastaple coupling. Both optical absorption spectroscopy and DFT computations show that the electronic structure of the Au(25) nanomolecule retains its main features after exchange of up to eight monothiol ligands.     

Synthesis, characterization, and testing of supported Au catalysts prepared from atomically-tailored Au38(SC12H25)24 clusters

Nearly monodispersed Au(38)(SC(12)H(25))(24) clusters (1.7 ± 0.2 nm) were synthesized using a modified Brust process while utilizing a "thiol etching" approach for the ligand exchange. HRTEM, MALDI, FTIR, and XAS analysis confirmed the formation of the 38-atom clusters in solution. This solution was used to impregnate a microporous TiO(2) support to give 0.7% Au(38)/TiO(2) catalyst. Subsequent drying in air and treatment with H(2)/He at 400 °C removed most of the sulfur ligands, and also increased the Au cluster size to 3.9 ± 0.96 nm. XPS and EXAFS analysis of this supported catalyst showed trace levels of residual sulfides, apparently located at the Au-TiO(2) interface. CO oxidation tests on these supported clusters show an activation energy and range of TOFs comparable to those reported by others. These results suggest that supported Au clusters of controllable size can be prepared with this thiol-ligated solution-based method, providing a new approach to the synthesis of these catalysts.     

Electrospray ionization mass spectrometry of uniform and mixed monolayer nanoparticles: Au25[S(CH2)2Ph]18 and Au25[S(CH2)2Ph]18-x(SR)x

New approaches to electrospray ionization mass spectrometry (ESI-MS)-with exact compositional assignments-of small (Au25) nanoparticles with uniform and mixed protecting organothiolate monolayers are described. The results expand the scope of analysis and reveal a rich chemistry of ionization behavior. ESI-MS of solutions of phenylethanethiolate monolayer-protected gold clusters (MPCs), Au25(SC2Ph)18, containing alkali metal acetate salts (MOAc) produce spectra in which, for Na+, K+, Rb+, and Cs+ acetates, the dominant species are MAu25(SC2Ph)182+ and M2Au25(SC2Ph)182+. Li+ acetates caused ligand loss. This method was extended to the analysis of Au25 MPCs with mixed monolayers, where thiophenolate (-SPh), hexanethiolate (-SC6), or biotinylated (-S-PEG-biotin) ligands had been introduced by ligand exchange. In negative-mode ESI-MS, no added reagents were needed in order to observe Au25(SC2Ph)18- and to analyze mixed monolayer Au25 MPCs prepared by ligand exchange with 4-mercaptobenzoic acid, HSPhCOOH, which gave spectra through deprotonation of the carboxylic acids. Adducts of tetraoctylammonium (Oct4N+) with -SPhCOO- sites were also observed. Mass spectrometry is the only method that has demonstrated capacity for measuring the exact distribution of ligand-exchange products. The possible origins of the different Au25 core charges (1-, 0, 1+, 2+) observed during electrospray ionization are discussed.     

The Au25(pMBA)17Diglyme Cluster

A modification of Au₂₅(pMBA)₁₈ that incorporates one diglyme ligand as a direct synthetic product is reported. Notably the expected statistical production of clusters containing other ligand stoichiometries is not observed. This Au₂₅(pMBA)₁₇diglyme product is characterized by electrospray ionization mass spectrometry (ESI-MS) and optical spectroscopy. Thiolate for thiolate ligand exchange proceeds on this cluster, whereas thiolate for diglyme ligand exchange does not.     

Thermally-induced formation of atomic Au clusters and conversion into nanocubes

A thermal method for converting Au colloids into atomic Au clusters and subsequent growth of Au nanocubes from clusters is reported. Mass spectral analysis shows that these clusters are Au trimers. The Au clusters show distinct optical absorption at 305 and 250 nm and have extraordinary stability under ambient conditions.     

Template synthesis of subnanometer gold clusters in interfacially cross-linked reverse micelles mediated by confined counterions

A cationic surfactant with a triallylammonium headgroup was cross-linked photochemically in the presence of a hydrophilic dithiol in the reverse micelle (RM) configuration. The interfacially cross-linked reverse micelles (ICRMs) are unusual templates for nanomaterials synthesis. Our previous work indicated that the ICRMs could extract anionic metal salts such as tetracholoroaurate into the hydrophilic interior, and the entrapped aurate was reduced without externally added reducing agent to form subnanometer luminescent gold clusters [Zhang, S.; Zhao, Y. ACS Nano 2011, 5, 2637-2646]. In this work, the bromide counterions were established as the reducing agent in the template synthesis. The reduction of tetrachloroaurate was proposed to happen through ligand exchange on the aurate by the bromide ions, reductive elimination of halogen, and disproportionation of the Au(I) intermediate. The size of the gold clusters could be tuned rationally by the water-to-surfactant ratio (W(0)) and the reducing agent. Monodisperse Au(4) and Au(9-10) clusters as well as larger Au(18) and Au(23) clusters were obtained from the ICRM templates. The as-prepared, metastable gold clusters were subject to reconstruction triggered by ligand exchange on the surface but could be stabilized through proper surface protection using a chelating dithiol.     

Synthesis and stability of monolayer-protected Au38 clusters

A synthesis strategy to obtain monodisperse hexanethiolate-protected Au38 clusters based on their resistance to etching upon exposure to a hyperexcess of thiol is reported. The reduction time in the standard Brust-Schiffrin two-phase synthesis was optimized such that Au38 were the only clusters that were fully passivated by the thiol monolayer which leaves larger particles vulnerable to etching by excess thiol. The isolated Au38 was characterized by mass spectrometry, thermogravimetric analysis, optical spectroscopy, and electrochemical techniques giving Au38(SC6)22 as the molecular formula for the cluster. These ultrasmall Au clusters behave analogously to molecules with a wide energy gap between occupied (HOMO) and unoccupied levels (LUMO) and undergo single-electron charging at room temperature in electrochemical experiments. Electrochemistry provides an elegant means to study the electronic structure and the chemical stability of the clusters at different charge states. We used cyclic voltammetry and scanning electrochemical microscopy to unequivocally demonstrate that Au38 can be reversibly oxidized to charge states z = +1 or +2; however, reduction to z = -1 leads to desorption of the protecting thiolate monolayer. Although this reductive desorption of thiol from the cluster surface is superficially analogous to electrochemical desorption of planar self-assembled monolayers (SAMs) from macroscopic electrodes, the molecular details of the process are likely to be complicated based on the current view that the thiolate monolayer in clusters is in fact composed of polymeric Au-S complexes.     

X-ray magnetic circular dichroism of size-selected, thiolated gold clusters

We report herein the X-ray magnetic circular dichroism (XMCD) at the Au L2,3 edges of a series of Au clusters protected by glutathione (GSH). The samples used here included AuN(SG)M with (N, M) = (10, 10), (15, 13), (18, 14), (22, 16), (25, 18), (29, 20), (39, 24) and a sodium gold(I) thiomalate (SGT) as a reference. Magnetic moments per cluster were found to be increased with size, whereas those per Au-S bond were nearly constant. This finding suggests that a localized hole created by Au-S bonding at the gold/glutathione interface, rather than the quantum size effect, is responsible for the spin polarization of gold clusters.     

On the structure of the Au18(SR)14 cluster

First principles calculations are used for a systematic search of the lowest-energy (most-stable) structure of the recently synthesized Au(18)(SR)(14) cluster. A comparison of the calculated optical absorption and electronic circular dichroism spectra, which are highly sensitive to the cluster structure and chirality, with the experimental spectra of the glutathione-protected gold cluster, Au(18)(SG)(14), is used to discriminate between low-energy isomers of the Au(18)(SR)(14) (R = CH(3)) cluster. From the good agreement between calculated and measured spectra, it is predicted that the structure of the Au(18)(SR)(14) cluster consists of a prolate Au(8) core covered with two dimer (SR-Au-SR-Au-SR) and two trimer (SR-Au-SR-Au-SR-Au-SR) motifs. These results provide additional evidence on the existence of longer trimer motifs as protecting units of small thiolated gold clusters.     

Heterophase ligand exchange and metal transfer between monolayer protected clusters

This paper describes reactions in which ligands are exchanged and metals are transferred between monolayer-protected metal clusters (MPCs) that are in different phases (heterophase exchange) or are in the same phase. For example, contact of toluene solutions of alkanethiolate-coated gold MPCs with aqueous solutions of tiopronin-coated gold MPCs yields toluene-phase MPCs that have some tiopronin ligands and aqueous-phase MPCs that have some alkanethiolate ligands. In a second example, heterophase transfer reactions occur between toluene solutions of alkanethiolate-coated gold MPCs and aqueous solutions of tiopronin-coated silver MPCs, in which tiopronin ligands are transferred to the former and gold metal to the latter phase. These ligand and metal exchange reactions are inhibited when conducted under N(2). The results implicate participation of an oxidized form of Au (such as a Au(I) thiolate, Au(I)-SR) as both a ligand and metal carrier in the exchange reactions. Au(I)-SR is demonstrated to be an exchange catalyst.     

Sub-nanometer Au monolayer-protected clusters exhibiting molecule-like electronic behavior: quantitative high-angle annular dark-field scanning transmission electron microscopy and electrochemical characterization of clusters with precise atomic stoichiometry

The synthesis and characterization of the clusters Au13[PPh3]4[S(CH2)11CH3]2Cl2 (1) and Au13[PPh3]4[S(CH2)11CH3]4 (2) are described. These mixed-ligand, sub-nanometer clusters, prepared via exchange of dodecanethiol onto phosphine-halide gold clusters, show enhanced stability relative to the parent. The characterization of these clusters features the precise determination of the number of gold atoms in the cluster cores using high-angle annular dark-field scanning transmission electron microscopy, allowing the assignment of 13 gold atoms (+/-3 atoms) to the composition of both cluster molecules. Electrochemical and optical measurements reveal discrete molecular orbital levels and apparent energy gaps of 1.6-1.7 eV for the two cluster molecules. The electrochemical measurements further indicate that the Au13[PPh3]4[S(CH2)11CH3]2Cl2 cluster undergoes an overall two-electron reduction. The electrochemical and spectroscopic properties of the two Au13 cluster molecules are compared with those of a secondary synthetic product, which proved to be larger Au thiolate-derivatized monolayer-protected clusters with an average core of Au180. The latter shows behavior fully consistent with the adoption of metallic-like properties.     

The relevance of shape and size of Au55 clusters

This critical review deals with the history of Au(55)(PPh(3))(12)Cl(6) and its derivatives from the very beginning in 1981 to date. Au(55) clusters obtain their special interest from their ultimate size and their ideal cuboctahedral structure. They are part of the family of so-called full-shell clusters, particles with perfectly completed geometries, also represented by icosahedral Au(13) clusters. Bare as well as ligand protected Au(55) clusters not only exhibit special chemical and physical stability, but draw their attention particularly from their unique electronic properties. Single electron switching at room temperature becomes possible, giving rise for development of applications in future nanoelectronic devices. A predominantly size-determined property of the 1.4 nm particles becomes obvious with respect of biological response. Au(55) clusters indicate an unusual cytotoxicity which seems to be caused by the unusually strong interaction between the 1.4 nm particles and the major grooves of DNA. Only marginally smaller or larger particles show drastically reduced toxicity, whereas significantly larger gold nanoparticles are completely non-toxic. Both, the electronic perspectives as well as the relevance in toxicology are at very early stages of development (75 references).     

Adsorption energies of molecular oxygen on Au clusters

The adsorption properties of O(2) molecules on anionic, cationic, and neutral Au(n) clusters (n=1-6) are studied using the density functional theory (DFT) with the generalized gradient approximation (GGA), and with the hybrid functional. The results show that the GGA calculations with the PW91 functional systemically overestimate the adsorption energy by 0.2-0.4 eV than the DFT ones with the hybrid functional, resulting in the failure of GGA with the PW91 functional for predicting the adsorption behavior of molecular oxygen on Au clusters. Our DFT calculations with the hybrid functional give the same adsorption behavior of molecular oxygen on Au cluster anions and cations as the experimental measurements. For the neutral Au clusters, the hybrid DFT predicts that only Au(3) and Au(5) clusters can adsorb one O(2) molecule.