苯胺链段为侧基的聚酰胺酸的合成及性质

采用三元共聚法制备了苯胺齐聚物为侧链的接枝型聚酰胺酸. 通过红外光谱、核磁共振谱及高效凝胶渗透色谱等技术对聚合物结构进行了表征. 该材料亚胺化后具有十分优异的热稳定性. 紫外-可见光谱和电化学测试结果表明, 该聚合物具有独特的光谱性质和可逆的电化学活性. 聚酰胺酸/ITO电致变色电极具有颜色变化明显, 响应速度较快, 着色效率高等优点, 是一种综合性能较好的电致变色聚合物材料.     

接枝树形支化分子双亲性嵌段共聚肽的合成及性能研究

分别以叠氮丙胺和丙炔胺为引发剂,采用氨基酸环内酸酐开环聚合法(NCA-ROP),引发L-谷氨酸-γ-苄酯-N-羧基-环内酸酐和L-谷氨酸-γ-氯乙醇酯-N-羧基-环内酸酐聚合得到链端基为叠氮基的聚(L-谷氨酸-γ-苄酯)(PBLG)和链端基为炔基的聚(L-谷氨酸-γ-氯乙醇酯)(PCELG)均聚物.联合点击化学法(click chemistry)制备了一系列聚(L-谷氨酸-γ-苄酯)-b-聚(L-谷氨酸-γ-氯乙醇酯)(PBLG-b-PCELG),再通过对嵌段共聚物侧基氯进行化学修饰,将二代的甲基烷氧醚类亲水性树形枝化分子(G2)接枝到侧链上,形成一系列树形支化分子接枝聚肽双亲性嵌段共聚物,通过核磁(NMR)、红外光谱(IR)和凝胶渗透色谱(GPC)对其化学结构进行了表征,并采用紫外-可见光谱(UV-Vis)研究了聚合物结构及其溶液浓度对其温敏行为的影响规律.     

苯胺四聚体与聚乙二醇嵌段及星型共聚物的合成及表征

以氨基封端的苯胺四聚体为基础, 通过将端氨基取代为不同数量的羧基, 得到了一系列连接臂数不同的苯胺四聚体-聚乙二醇共聚物, 对反应历程中的各阶段产物进行了结构表征, 并对苯胺四聚体及最终产物进行了电化学性能测试. 结构表征证明反应按照设计路线成功进行并得到了理想的产物; 循环伏安特性曲线表明, 共聚物基本保留了苯胺四聚体的电化学性能, 可以发生从还原态到中间态再到氧化态的转变.     

含苯胺低聚物侧链的导电共聚物的合成与性能研究

通过高分子反应合成了含有不同长度苯胺链段的聚甲基丙烯酸类接枝聚合物 ,研究结果发现 ,当苯胺链段达到一定长度时 ,经质子酸掺杂后的聚合物具有一定的电导性 ,其中 ,接枝苯胺八聚体的共聚物经质子酸掺杂后其电导率可以达到 10 - 5S cm .     

结构明确的梳形支化聚合物的合成与表征

通过活性聚苯乙烯(PS)和聚异戊二烯(PI)负离子与含1,1-二苯基乙烯(DPE)侧基的聚苯乙烯(PSe)的偶联反应合成了结构明确的每个重复单元含一条侧链的梳形支化聚合物,其中,PSe是通过Sc单体的原子转移自由基聚合(ATRP)和Wittig反应制得的.用IR1、H-NMR、GPC和SLS等测试方法对所得梳形支化聚合物进行了详细表征,讨论了活性负离子链与PSe的DPE基团的配比对接枝率的影响.结果表明,活性负离子链与DPE基团的偶联反应是高效的,可以通过调节活性负离子链与DPE基团的加料比来控制接枝率.另外,还讨论了PSe和活性负离子链的分子量对接枝率的影响.结果表明,在实验范围内当活性负离子链过量时可获得几乎定量的接枝率.     

电活性聚芳醚酮类环状分子的合成和性质

将电活性苯胺四聚体链段引入聚芳醚酮类刚性大环分子中, 得到了含电活性苯胺链段的聚芳醚酮类大环状分子低聚物C-1, 并通过循环伏安和紫外滴定法证明了这种新型环状分子具有电活性.     

侧链为端羧基聚乙二醇的梳形聚氨酯的合成与表征

以L-赖氨酸、乙二胺和端羧基聚乙二醇(PEG)为原料合成一种带聚乙二醇侧链的二元胺扩链剂(Lys-NH-PEG),然后以4,4'-二苯基甲烷二异氰酸酯(MDI)和Lys-NH-PEG为硬段,聚碳酸酯二醇(PCD)为软段,制备一种含端羧基聚乙二醇侧链的梳形聚氨酯.对所合成聚氨酯材料进行傅立叶变换红外光谱(FTIR)、氢核磁共振谱(1H-NMR)、凝胶渗透色谱(GPC)测试,测试结果表明得到了目标聚合物.该聚合物能在水中形成胶体,并能化学接枝白蛋白,表明所合成的聚氨酯的PEG侧链端羧基具有反应活性.这种具有可反应性的聚氨酯为进一步接枝生物分子以提高生物相容性提供了广阔的空间.     

生物可降解电活性苯胺聚合物

导电聚合物通过其独特的电活性或导电性,可智能地传递或控制细胞电化学信号,从而定向诱导组织器官的再生修复,已成为神经和组织工程领域研究的热点.本文主要介绍了我们实验室生物可降解电活性苯胺聚合物的相关工作,介绍了以苯胺齐聚物与可降解高分子接枝或嵌段制备具有电活性、可生物降解的新型导电聚合物及其在细胞培养和组织工程方面的研究.介绍了静电纺丝制备电活性纳米纤维的概况.苯胺齐聚物与可降解聚合物的接枝和嵌段可同时赋予其电活性、生物相容性和生物可降解性.可生物降解的电活性聚合物是未来生物组织工程领域的发展趋势之一,具有广阔的应用前景.     

接枝改性PVDF基含氟聚合物

聚偏氟乙烯(PVDF基)含氟聚合物由于其独特的性能受到了广泛的关注。将功能化链段引入PVDF基含氟聚合物可以进一步提升其性能并拓展其应用领域。相较于物理共混法和直接共聚改性法,通过接枝改性法将功能化单体引入含氟聚合物的侧链具有更显著的优势,可便捷、高效地得到组成精确,结构可控的接枝共聚物。本文综述了通过活性自由基聚合(包括ATRP、SET-LRP、有机催化原子转移自由基聚合(O-ATRP)、光诱导Cu(Ⅱ)介导RDRP)和高能射线辐射(γ射线,紫外,电子束)等对PVDF基含氟聚合物功能化接枝改性的方法,并对其发展趋势以及改性聚合物的应用前景进行了展望。     

侧链接枝低聚对亚苯基亚乙烯基聚芴衍生物的合成及其电致发光性能

采用Wittig-Horner反应,将少量端基为磷脂的黄光发射客体低聚对亚苯基亚乙烯基链段(MOPV)接枝到含有醛基单体的蓝光发射主体材料聚芴的侧链上,合成了一种新型的接枝聚芴衍生物PF-g-MOPV.这种接枝聚合物具有很好的热稳定性,可溶于常用的有机溶剂.以接枝共聚物PF-g-MOPV为发光层的单层器件发射出黄绿光,色坐标为(0.30,0.57),最大发光亮度达到1550cm/m2,这说明蓝光聚芴主链向侧链MOPV进行了有效地能量转移.     

苯胺四聚体-PEG两亲性嵌段共聚物的合成、表征及自组装行为

以二环己基碳二亚胺（DCC）为缩合剂与聚乙二醇单甲基醚（mPEG）反应的产物再与苯胺四聚体（AT）反应得到了两嵌段共聚物. 采用1H-NMR和FTIR分析方法确认了共聚物的结构,UV-Vis及CV的测试结果表明该共聚物具有良好的电活性特征. 用扫描电镜与光散射的方法对粒径大小进行了测量,共聚物在水溶液中可形成直径125 nm左右的均匀球形组装体,并通过透射电镜确定了组装体的实心结构. 当嵌段共聚物处于中间氧化态时,组装体的尺寸会随着溶液pH值的不同而变化. 对组装体的形成及pH敏感性的可能机理进行了讨论.     

聚乙二醇-聚谷氨酸-聚丙氨酸三嵌段共聚物的合成及其胶束的pH-响应性药物控制释放

通过大分子引发剂ω-胺基-α-甲氧基聚乙二醇引发N-羧基-α-氨基环内酸酐开环聚合和酸性水解制备了一种具有pH-响应性的三嵌段共聚物聚乙二醇-聚谷氨酸-聚丙氨酸(mPEG-PLGA-PLAA).通过核磁共振、ζ-电势、动态光散射、电子显微镜等手段表征了此类三嵌段共聚物的自组装过程及所形成胶束的pH-响应性.使用圆二色谱和红外光谱,分析了胶束结构随环境pH值转变过程中聚氨基酸链段二级结构的变化.以阿霉素作为模型药物,研究了三嵌段共聚物的载药能力和在不同pH条件下的药物释放能力.在碱性条件下,PLGA链段去质子化,链段从疏水性变为亲水性,胶束中间层由于水合作用变得松散,药物释放速率增加;在酸性条件下,PLGA链段质子化,不带电荷,与阿霉素药物分子间的静电相互作用消失.同时,PLGA链段α-螺旋含量增加,形成由链内氢键维持的刚性棒状结构,将链段周围包埋的药物分子"挤出",加速了药物的释放.     

Chemical and electrochemical grafting of polyaniline onto poly(vinyl chloride): synthesis,characterization, and materials properties

We have designed and developed a new strategy for the chemical and electrochemical graft copolymerization of aniline onto poly(vinyl chloride). For this purpose, first phenylamine groups were incorporated into poly(vinyl chloride) via a nucleophilic substitution reaction in the presence of a solvent composed of 4‐aminophenol, potassium carbonate, and dry N,N‐dimethylformamide at room temperature, in order to avoid cross‐linking. The macromonomer obtained was used in chemical and electrochemical oxidation copolymerization with aniline monomer to yield a poly(vinyl chloride)‐g‐polyaniline (PVC‐g‐PANI) graft copolymer. The chemical structures of samples as representatives were characterized by means of Fourier transform infrared and ¹H nuclear magnetic resonance spectroscopies. The electroactivity behaviors of the synthesized samples were verified under cyclic voltammetric conditions. The electrical conductivity and electroactivity measurements showed that the PVC‐g‐PANI graft copolymer has lower electrical conductivity as well as electroactivity than those of the pure PANI. However, the lower electrical conductivity and electroactivity levels in this material can be improved at the price of solubility and processability. Moreover, the thermal behavior and chemical composition of the synthesized graft copolymer were investigated. Copyright © 2016 John Wiley & Sons, Ltd.     

Novel electroactive poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups: Synthesis and properties

We present a series of novel poly(arylene ether sulfone) copolymers containing pendant oligoaniline groups. A novel monomer containing oligoaniline, 2,6‐difluorobenzoyl aniline tetramer (DFAT), was synthesized by reaction of 2,6‐difluorobenzoyl chloride and parent aniline tetramer and incorporated into the aforementioned copolymers via direct copolymerization with 4,4′‐dichlorodiphenyl sulfone (DCDPS), and 4,4′‐isopropylidene diphenol (BPA) using N,N′‐dimethylacetamide as solvent. The structures of these copolymers were confirmed by FTIR, ¹H NMR, and GPC. Spectral analysis of the copolymers in different oxidation states was investigated via UV‐visible spectra. The copolymers exhibited outstanding thermal stability and good solubility in various organic solvents. Their electroactivity, explored with cyclic voltammetry, was found to increase as the content of oligoaniline in the polymer increased. The electric and dielectric properties of the copolymers were also studied in detail. The electrochromic performance of the copolymers was investigated by electrochromic photographs and transmittance spectra; the color of the copolymer thin films changes from grey (at 0.0 V), to green (at 0.4 V), to blue (at 0.6 V) and to pearl blue (at 1.0 V) and the maximum transmittance change (ΔT) at 700 nm is 42.6% (90.7% ? 48.1%). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

氧化偶联聚合的方法合成新型电活性聚醚砜及其结构表征

通过氧化偶联聚合的方法我们制备了一种新型电活性聚芳醚砜,这种聚合物主链上含有苯基封端的苯胺四聚体齐聚物单元。我们通红外、核磁和XRD对其结构进行了表征。在1.0M的硫酸水溶液介质中我们对其电活性进行了研究,聚合物展现出两对氧化还原峰。此外,我们使用TGA测试手段对其热稳定性也做了研究。在室温质子酸掺杂的条件下聚合物的导电率为1.37 × 10-7 S·cm-1。     

固相法合成苯胺与邻甲氧基苯胺共聚物及其性能

以苯胺和邻甲氧基苯胺为单体,甲磺酸为掺杂酸,用固相法合成了甲磺酸掺杂苯胺与邻甲氧基苯胺共聚物。 通过红外光谱、紫外可见吸收光谱、X射线衍射、透射电子显微镜、循环伏安和电导率等对共聚物进行了结构表征和性能测试。 结果表明,不同摩尔比的苯胺与邻甲氧基苯胺共聚物处于中间氧化态,随邻甲氧基苯胺含量的增大,共聚物的掺杂率降低。 共聚物具有较高的结晶性和纤维状形貌,当苯胺与邻甲氧基苯胺摩尔比为1∶1时,具有较高的电化学活性,其导电率为1.65 S/cm。     

氧化偶联聚合方法合成电活性聚芳醚酮

通过氧化偶联聚合方法成功地合成出电活性聚芳醚酮. 该反应条件温和, 操作简单, 室温下即可进行. 用红外光谱、核磁共振谱、高效凝胶渗透色谱、循环伏安、热失重、X射线衍射等技术对所合成的聚合物进行了表征, 并探讨了聚合物的性能.     

Amphiphilic PEG‐grafted poly(ester‐carbonate)s: Synthesis and diverse nanostructures in water

Novel biodegradable amphiphilic graft copolymers containing hydrophobic poly(ester‐carbonate) backbone and hydrophilic poly(ethylene glycol) (PEG) side chains were synthesized by a combination of ring‐opening polymerization and “click” chemistry. First, the ring‐opening copolymerization of 5,5‐dibromomethyl trimethylene carbonate (DBTC) and ε‐caprolactone (CL) was performed in the presence of stannous octanoate [Sn(Oct)₂] as catalyst, resulting in poly(DBTC‐co‐CL) with pendant bromo groups. Then the pendant bromo groups were completely converted into azide form, which permitted “click” reaction with alkyne‐terminated PEG by Huisgen 1,3‐dipolar cycloadditions to give amphiphilic biodegradable graft copolymers. The graft copolymers were characterized by proton nuclear magnetic resonance (¹H NMR), Fourier transform infrared spectra and gel permeation chromatography measurements, which confirmed the well‐defined graft architecture. These copolymers could self‐assemble into micelles in aqueous solution. The size and morphologies of the copolymer micelles were measured by transmission electron microscopy and dynamic light scattering, which are influenced by the length of PEG and grafting density. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011.     

电活性可生物降解纳米复合材料PAP/op-HA/PLGA的制备及成骨活性

以苯胺五聚体与聚乳酸（PLA）的三嵌段共聚物（PAP）与表面接枝低聚乳酸的纳米羟基磷灰石（op-HA）和聚丙交酯-乙交酯（PLGA）的复合物共混,制备的电活性可降解纳米复合材料PAP/op-HA/PLGA为研究对象,采用紫外可见光谱、循环伏安扫描和标准四探针法分析其电化学特性及电导率。ESEM观察其膜表面形貌,接触角评价其亲水性。通过在材料膜表面接种兔成骨细胞进行体外培养,采用荧光染色、NIH Image J图像分析和Real-time PCR综合评价细胞在材料表面的粘附、扩展（细胞面积比）和成骨相关基因的表达水平,以此评价新型电活性纳米复合骨修复材料PAP/op-HA/PLGA的表面性质和生物活性。结果表明,PAP/op-HA/PLGA的电导率较低（~5?10?6 S/cm）但具有良好的电化学氧化还原性能,PAP含量为0.1%时材料的亲水性明显改善,成骨细胞的粘附和扩展明显增强。培养7天时骨形态蛋白- 2（BMP-2）和骨连接蛋白（Osteonectin）的基因表达水平明显提高,而对Ⅰ型胶原蛋白的基因表达没有明显影响。提示PAP/op-HA/PLGA具有良好的细胞相容性和成骨活性。     

Synthesis of Vinyl Polymer—Poly (α-Amino Acid) Block Copolymers by End-Reactive Oligomers

In order to synthesize block copolymers consisting of segments having dissimilar properties, vinyl polymer - poly (α-amino acid) block copolymers were synthesized by two different methods. In the first method, the terminal amino groups of polysarcosine, poly(γ-benzyl L-glutamate), and poly(γ-benzyloxycarbonyl-L-lysine) were haloacetylated. The mixture of the terminally haloacetylated poly (α-amino acid) and styrene or methyl methacrylate was photoirradiated in the presence of Mo (CO)₆ or heated with Mo(CO)₆, yielding A-B-A-type block copolymers consisting of poly(α-amino cid) (the A component) and vinyl polymer(the B component). The characterization of block copolymers revealed that the thermally initiated polymerization of vinyl compounds by the trichloroacetyl poly(α-amino acid)/Mo(CO)₆ system was most suitable for the synthesis of vinyl polymer - poly-(α-amino acid) block copolymers. In the second method, poly (methyl methacrylate) and polystyrene having a terminal amino group were synthesized by the radical polymerization in the presence of 2-mercaptoethylammonium chloride. Using these polymers having a terminal amino group as an initiator, the block polymerizations of γ-benzyl L-glutamate NCA and e-benzyloxycarbonyl-L-lysine NCA were carried out, yielding A-B-type block copolymer. By eliminating the protecting groups of the side chains of poly(α-amino acid) segment, block copolymers such as poly(methyl methacrylate) with poly(L-glutamic acid) or poly(L-lysine) and polystyrene with poly(L-glutamic acid) and poly(L-lysine) were successfully synthesized.