Surface sticking and lateral diffusion of lipids in supported bilayers

The diffusion of fluorescently labeled lipids in supported bilayers is studied using two different methods: Z-scan fluorescence correlation spectroscopy (z-scan FCS) and two-focus fluorescence correlation spectroscopy (2f-FCS). It is found that the data can be fitted consistently only when taking into account partial sticking of the labeled lipids to the supporting glass surface. A kinetic reaction-diffusion model is developed and applied to the data. We find a very slow sticking rate which, however, when neglected, leads to strongly varying estimates of the free diffusion coefficient. The study reveals a strong sensitivity of FCS on even slight binding/unbinding kinetics of the labeled molecules, which has significance for related diffusion measurements in cellular lipid membranes.     

胶原在聚乳酸旋涂膜表面的吸附研究

采用石英晶体微天平(QCM)、原子力显微镜(AFM)研究了胶原在聚乳酸旋涂膜表面的吸附,考察了溶液浓度(0～9.25μg/mL)和温度(10～50℃)对胶原吸附的影响.实验结果表明,随着胶原浓度的增加,胶原在聚乳酸表面的吸附量和吸附初速率都相应增加.采用Langmuir模型和Freundlich模型拟合实验数据得到吸附等温线方程,分别为q=11690.99c1+0.99c和q=610c3.179.实验结果显示,Langmuir模型拟合效果要好于Freundlich模型.采用Lagergren拟一阶吸附速率方程和Lagergren拟二阶速率方程拟合不同浓度下的吸附动力学数据.在低浓度下Lagergren拟一阶速率方程拟合效果比较好,在高浓度下Lagergren拟二阶速率方程拟合效果比较好,说明在低浓度时扩散过程是胶原吸附的控速步骤,高浓度时胶原和聚乳酸表面的相互作用是吸附的控速步骤.原子力显微镜显示,吸附在聚乳酸表面的胶原形成网状结构.胶原的吸附受温度影响显著,说明胶原是一种对温度非常敏感的物质.实验结果表明随着温度的升高,在10～40℃范围内胶原的吸附量逐渐降低,在40～45℃范围内锐减,40℃是本实验条件下胶原的变性温度.     

Simple models of adsorption in nanotubes

We present two very simple models of adsorption in cylindrical pores. It is assumed that a layer-by-layer mechanism occurs similarly to that in the BET theory. The major assumption is that in the pores having an adsorption space with cylindrical geometry, the surface area of the upper surface (in comparison with the bottom surface) should be diminished in proportion to the radii of a cylinder. Two cases are considered: the adsorbate-adsorbate interactions are neglected or they are taken into account according to the lattice model developed by Fowler and Guggenheim. It is shown that the data simulated by Ohba and Kaneko for adsorption of nitrogen in the internal space of carbon nanotubes are successfully described by our models. On the basis of the fitted data we show that the relation between the monolayer capacity in cylindrical pores and on flat surfaces is in excellent agreement with the equation developed recently by Salmas and Androutsopoulos. Moreover, our models are verified for two sets of experimental data reported by Kaneko et al. We obtain excellent agreement between the values of the pore diameters calculated by us and suggested by these authors (from HRTEM, the GCMC simulations, and the IDBdB model). It is concluded that proposed simple and fast models can be applied as a first approximation to the estimation of the internal nanotube diameters if they do not exceed ca. 5 nm and are slightly dispersed.     

Hydrophobic interaction chromatography of proteins. III. Unfolding of proteins upon adsorption

Hydrophobic interaction chromatography (HIC) exploits the hydrophobic properties of protein surfaces for separation and purification by performing interactions with chromatographic sorbents of hydrophobic nature. In contrast to reversed-phase chromatography, this methodology is less detrimental to the protein and is therefore more commonly used in industrial scale as well as in bench scale when the conformational integrity of the protein is important. Hydrophobic interactions are promoted by salt and thus proteins are retained in presence of a cosmotropic salt. When proteins are injected on HIC columns with increasing salt concentrations under isocratic conditions only, a fraction of the applied amount is eluted. The higher the salt concentration, the lower is the amount of eluted protein. The rest can be desorbed with a buffer of low salt concentration or water. It has been proposed that the stronger retained protein fraction has partially changed the conformation upon adsorption. This has been also corroborated by physicochemical measurements. The retention data of 5 different model proteins and 10 different stationary phases were evaluated. Partial unfolding of proteins upon adsorption on surfaces of HIC media were assumed and a model describing the adsorption of native and partial unfolded fraction was developed. Furthermore, we hypothesize that the surface acts as catalyst for partial unfolding, since the fraction of partial unfolded protein is increasing with length of the alkyl chain.     

一个与吸附剂浓度有关的Langmuir等温式

实验测定了不同吸附剂浓度下, 高岭土对Pb(II)和Cu(II)的吸附作用, 结果表明存在明显的吸附剂浓度效应, 即吸附等温线随吸附剂浓度升高而降低. 采用传统的Langmuir 吸附等温式对实验数据进行拟合表明, 此等温式可准确地描述给定吸附剂浓度下的吸附结果, 但不能预测其吸附剂浓度效应. 根据表面组分活度(SCA)模型, 假设吸附剂颗粒间存在相互作用, 吸附剂表面吸附位的活度系数不等于1, 而应为吸附剂浓度的函数, 推导出了一个与吸附剂浓度有关的Langmuir (Langmuir-SCA)方程. 运用高岭土吸附Pb(II)和Cu(II)以及文献中蛭石吸附Zn(II)和Cd(II)、咖啡吸附Pb(II)的实验数据检验方程的适用性, 结果表明Langmuir-SCA方程可准确地描述所观察到的吸附剂浓度效应. 方程的两个内禀参数, 热力学平衡常数(K_eq)和特征饱和吸附量(Γ_m⁰), 与吸附剂浓度无关, 并可由吸附实验数据拟合求得.     

Misleading information on homogeneity and heterogeneity obtained from sorption isotherms

In this paper, the applications and the differences among the widely applied sorption isotherms (Langmuir isotherm for adsorption, competitive adsorption, ion exchange, Freundlich isotherm) are shown. The misleading information obtained by the formal applications of the isotherms is demonstrated using a simple mathematical model of homovalent ion exchange on homogeneous surface. This model calculation clearly reveals that when studying surface accumulation processes, the mechanism of the sorption process has to be determined. The correct thermodynamic interpretation of the data of sorption experiments is possible only if the isotherm is adapted to the sorption mechanism. It is emphasized that the regression values of the applied models themselves provide correct information neither on the surface heterogeneity nor the interactions among the sorbed species. The curved shape of an inadequate applied isotherm gives no information about the heterogeneity. In order to study the energy distribution of surface sites, the thermodynamic equations, including isotherms, has to be selected on the basis of sorption mechanism. All variable quantities involved in the given model (concentrations of the competing substances in all phases) have to be measured experimentally and included into the isotherm.     

Sizes of water-soluble luminescent quantum dots measured by fluorescence correlation spectroscopy

In this paper, fluorescence correlation spectroscopy (FCS) was applied to measure the size of water-soluble quantum dots (QDs). The measurements were performed on a home-built FCS system based on the Stokes-Einstein equation. The obtained results showed that for bare CdTe QDs the sizes from FCS were larger than the ones from transmission electron microscopy (TEM). The brightness of QDs was also evaluated using FCS technique. It was found that the stability of the surface chemistry of QDs would be significantly improved by capping it with hard-core shell. Our data demonstrated that FCS is a simple, fast, and effective method for characterizing the fluorescent quantum dots, and is especially suitable for determining the fluorescent nanoparticles less than 10 nm in water solution.     

Effect of salts and temperature on the adsorption of bovine serum albumin on polypropylene glycol-Sepharose under linear and overloaded chromatographic conditions

The interaction thermodynamics associated with bovine serum albumin (BSA) adsorption on polypropylene glycol (PPG)-Sepharose CL-6B gel, using ammonium and sodium sulfate was studied. Analysis of data under linear conditions was accomplished with the stoichiometric displacement retention model and preferential interaction approach. Preferential interaction analysis indicated a strong entropic driving force due to the release of a large amount of solvent on adsorption. Flow microcalorimetry provided direct heat of adsorption measurements under overloaded conditions and confirmed that the adsorption of BSA on PPG-Sepharose was entropically driven within the range of conditions studied. Using these data in combination with isotherm measurements, it is shown that protein surface coverage, salt concentration, salt type and temperature affect the enthalpic and entropic behavior in hydrophobic interaction chromatography (HIC). This study shows that protein-sorbent interactions can be strongly influenced by the degree of water release, protein-protein interactions on the surface, and the re-orientation and/or reconfiguration of the adsorbed protein.     

Simple model for DNA adsorption onto a mica surface in 1:1 and 2:1 electrolyte solutions

We propose a simple theory of interactions between like-charged polyelectrolyte and a surface based on a mean-field Derjaguin-Landau-Verwey-Overbeek approach. It predicts that the van der Waals attractive interactions are responsible for irreversible physisorption of polyelectrolytes onto charged surfaces. We show that monovalent salts contribute significantly to repulsive interactions, while enhancing the attraction very slightly. The effect of the divalent counterions is reverse. Therefore, to achieve the adsorption, the overall repulsion due to 1:1 electrolyte should be counterbalanced by the stronger van der Waals attraction due to the presence of doubly charged counterions in solution. The theory has been validated experimentally against its ability to predict the minimum polymer/surface interaction energy required for the adsorption using DNA/mica in NaCl, MgCl2, and NiCl2 solutions as a test system. The theory explains the mechanism of linear DNA adsorption to a mica surface for different solvent compositions and can be used as a tool for predicting the optimum conditions for AFM experiments on linear polymer systems. The model can also be used to make general conclusions on the conformation of polymer molecules on a surface. We have shown for the DNA/mica surface system that when the adsorption of DNA is mostly governed by long-range van der Waals forces the molecule adopts an ideal 2D conformation. When the adsorption is mostly due to short-range ion-correlation forces, DNA will appear 3D --> 2D projected in agreement with experimental data.     

Protein adsorption: A quest for a universal mechanism

Recent theoretical and experimental results pertinent to protein adsorption kinetics obtained for well-defined systems using direct experimental techniques are discussed. Attention is focused on albumins and fibrinogen, whose structure and physicochemical characteristic are well-known. It is confirmed that the experimental data obtained by AFM imaging, QCM, OWLS, XPS and electrokinetic techniques (streaming potential) are prone to a quantitative interpretation in terms of the coarse-grained and molecular dynamics modeling. This allows to derive reliable data concerning the mass transfer rates, hydration functions, maximum coverages and adsorption/desorption kinetic constants. These results confirm that the protein adsorption mechanism is governed by electrostatic interactions among heterogeneously distributed charges. The protein substrate interactions promote the molecule transfer through the surface layer, control the free energy and in consequence the residence time of the molecule on substrate surfaces. On the other hand, the interactions among adsorbed molecules control the maximum coverage and the formation of bilayer structures. As a result of this complex electrostatics, one often observes in protein adsorption studies the formation of irreversibly bound fraction of molecules that contact the substrate and a reversibly adsorbed fraction otherwise. This leads to the appearance of anomalous isotherms, characterized by considerable adsorption for negligible bulk protein concentration, which deviate from the Langmuir model.     

Adsorption kinetics of NIPAM-based polymers at the air-water interface as studied by pendant drop and bubble tensiometry

The adsorption of N-isopropylacrylamide (NIPAM) based thermoresponsive polymers at the air-water interface was investigated by using drop and bubble shape tensiometry. The molecular weight dependence of polymer adsorption rate was studied by using narrowly distributed polymer fractions (polydispersity < 1.2) that were prepared by solvent:nonsolvent fractionation. The time-dependent surface tension profiles were fitted to the Hua-Rosen equation and the t values obtained were applied for interpretation of the kinetic data. It was found that the rate of polymer adsorption increased as the molecular weight of the polymer decreased. The relationship between polymer surface concentration and surface tension was determined by applying the pendant drop as a Langmuir-type film balance. From this relationship, the kinetics of polymer adsorption determined experimentally was compared with the adsorption rates predicted by a diffusion-controlled adsorption model based on the Ward-Tordai equation. The predicted adsorption rates were in good agreement with what was found experimentally. The dependence of the adsorption rate on the molecular weight of polymers can be satisfactorily described within the diffusion-controlled model.     

The effects of ligand chain length, salt concentration and temperature on the adsorption of bovine serum albumin onto polypropyleneglycol-Sepharose

The interaction thermodynamics associated with bovine serum albumin adsorption on polypropylene glycol (n=3)-Sepharose CL-6B and polypropylene glycol (n=7)-Sepharose CL-6B, using ammonium sulfate as the modulator was studied. Analysis of data under linear conditions was accomplished with the stoichiometric displacement retention model, preferential interaction approach and van't Hoff plots applied to HIC systems. Preferential interaction analysis indicated a strong entropic driving force under linear conditions, due to the release of a large amount of solvent on adsorption. In contrast, flow microcalorimetry under overloaded conditions showed that the adsorption of bovine serum albumin may be entropically or enthalpically driven. It is postulated that adsorption in the nonlinear region is influenced by the degree of water release, protein-protein interactions on the surface, reorientation of ligand, and conformational changes in the protein.     

New concepts for fluorescence correlation spectroscopy on membranes

Fluorescence correlation spectroscopy (FCS) is a powerful tool to measure useful physical quantities such as concentrations, diffusion coefficients, diffusion modes or binding parameters, both in model and cell membranes. However, it can suffer from severe artifacts, especially in non-ideal systems. Here we assess the potential and limitations of standard confocal FCS on lipid membranes and present recent developments which facilitate accurate and quantitative measurements on such systems. In particular, we discuss calibration-free diffusion and concentration measurements using z-scan FCS and two focus FCS and present several approaches using scanning FCS to accurately measure slow dynamics. We also show how surface confined FCS enables the study of membrane dynamics even in presence of a strong cytosolic background and how FCS with a variable detection area can reveal submicroscopic heterogeneities in cell membranes.     

Adsorption of a diverse set of organic vapors on the bulk water surface

The bulk water surface is of fundamental interest to physical as well as environmental chemistry. As there is a lack of wide-ranging adsorption data from the air to the bulk water surface, a large and diverse data set of adsorption coefficients of nonionic, organic compounds has been produced with inverse gas chromatography. The 61 compounds were chosen to cover a large range of properties, considering the intermolecular interactions between the compounds and the bulk water surface, i.e., van der Waals and electron-donor/acceptor interactions. The data set gained in this work was interpreted with a linear free energy relationship (LFER) based on these intermolecular interactions. From this LFER, a general adsorption model is derived, including compound (i) and surface (surf) properties: log K(i surf/air)(m(3)/m(2)) = 0.135(+/-0.003) log K(i hexadecane/air)(gamma(surf)(vdW))(0.5) + 5.11(+/-0.15)Sigma beta(i2)(H)EA(surf) + 3.60(+/-0.28)Sigma alpha(i2)(H)ED(surf) - 8.47. This adsorption model can be used for the characterization of adsorption to any other surface. The adsorption model for bulk water surface adsorption as well as the general adsorption model can be used as prediction tools in natural or technical systems.     

Modeling of the adsorption kinetics of surfactants at the liquid-fluid interface of a pendant drop

This paper presents a theoretical model for simulating the adsorption kinetics of a surfactant at the liquid-fluid interface of a pendant drop. The diffusion equation is solved numerically by applying the semidiscrete Galerkin finite element method to obtain the time-dependent surfactant concentration distributions inside the pendant drop and inside the syringe needle that is used to form the pendant drop. With the obtained bulk surfactant concentration distributions, the adsorption at the interface is determined by using the conservation law of mass. It should be noted that the theoretical model developed in this study considers the actual geometry of the pendant drop, the depletion process of the surfactant inside the pendant drop, and the mass transfer of the surfactant from the syringe needle to the pendant drop. The present pendant-drop model is applied to study the adsorption kinetics of surfactant C10E8 (octaethylene glycol mono n-decyl ether) at the water-air interface of a pendant drop. The numerical results show that the Ward and Tordai equation, which was derived for adsorption from a semi-infinite surfactant solution to a planar interface, is unsuitable for interpreting the dynamic surface or interfacial tension data measured by using the pendant-drop-shape techniques, especially at low initial surfactant concentrations. The spherical-drop model, which assumes the pendant drop to be a perfectly spherical drop with the same drop volume, can be used to interpret the dynamic surface or interfacial tension data for pendant drops either with high initial surfactant concentrations or with low initial surfactant concentrations in short adsorption durations only. For pendant drops with low initial surfactant concentrations in long adsorption durations, the theoretical model developed in this study is strongly recommended.     

A Film-Pore-Surface Diffusion Model for the Adsorption of Acid Dyes on Activated Carbon

The sorption of acid dyes from aqueous effluents onto activated carbon has been studied. The effects of initial dye concentration and activated carbon mass on the rate of Acid Blue 80, Acid Red 114 and Acid Yellow 117 removal have been investigated. A three-resistance mass transport model based on film, pore and surface diffusion control has been applied to model the concentration decay curves. The model incorporates an effective diffusion coefficient D _eff, which is dependant on the equilibrium solid phase concentration or fractional surface coverage. The results of the film-pore-surface diffusion model are compared with the data obtained from the basic film-pore diffusion model. It has been found that the film-pore-surface diffusion model provides a major improvement over the data correlated by the film-pore diffusion model. Also, the relationship between surface diffusion and fractional surface coverage has been investigated for the adsorption of acid dyes on activated carbon.     

Development of Neuropeptide Y and Cell-Penetrating Peptide MAP Adsorbed onto Lipid Nanoparticle Surface

Functionalization of nanoparticles surfaces have been widely used to improve diagnostic and therapeutic biological outcome. Several methods can be applied to modify nanoparticle surface; however, in this article we focus toward a simple and less time-consuming method. We applied an adsorption method on already formulated nanostructured lipid carriers (NLC) to functionalize these nanoparticles with three distinct peptides sequences. We selected a cell-penetrating peptide (CPP), a lysine modified model amphipathic peptide (Lys(N₃)-MAP), CPP/drug complex, and the neuropeptide Y. The aim of this work is to evaluate the effect of several parameters such as peptide concentration, different types of NLC, different types of peptides, and incubation medium on the physicochemical proprieties of NLC and determine if adsorption occurs. The preliminary results from zeta potential analysis indicate some evidence that this method was successful in adsorbing three types of peptides onto NLC. Several non-covalent interactions appear to be involved in peptide adsorption with the possibility of three adsorption peptide hypothesis that may occur with NLC in solution. Moreover, and for the first time, in silico docking analysis demonstrated strong interaction between CPP MAP and NPY Y1 receptor with high score values when compared to standard antagonist and NPY.     

A Film-Pore-Surface Diffusion Model for the Adsorption of Acid Dyes on Activated Carbon

The sorption of acid dyes from aqueous effluents onto activated carbon has been studied. The effects of initial dye concentration and activated carbon mass on the rate of Acid Blue 80, Acid Red 114 and Acid Yellow 117 removal have been investigated. A three-resistance mass transport model based on film, pore and surface diffusion control has been applied to model the concentration decay curves. The model incorporates an effective diffusion coefficient D _eff, which is dependant on the equilibrium solid phase concentration or fractional surface coverage. The results of the film-pore-surface diffusion model are compared with the data obtained from the basic film-pore diffusion model. It has been found that the film-pore-surface diffusion model provides a major improvement over the data correlated by the film-pore diffusion model. Also, the relationship between surface diffusion and fractional surface coverage has been investigated for the adsorption of acid dyes on activated carbon.     

Contribution of concentration-dependent surface diffusion in ternary adsorption kinetics of ethane, propane and n-butane in activated carbon

The role of concentration-dependent surface diffusion in the adsorption kinetics of a multicomponent system is investigated in this paper. Ethane, propane and n-butane are selected as the model adsorbates and Ajax activated carbon as the model adsorbent. Adsorption equilibrium isotherm and dynamic parameters extracted from single-component systems are used to predict the ternary adsorption equilibria and kinetics. The effect of concentration-dependent surface diffusion on the adsorption kinetics predictions is studied by comparing the results of two mathematical models with the experimental data. Three diffusion mechanisms, macropore, surface and micropore diffusions are incorporated in both models. The distinction between these two models is the use of the chemical potential gradient as the driving force for the diffusion of the adsorbed species in one model and the concentration gradient in the other. It was found that the model using the chemical potential gradient provides a better prediction of the ternary adsorption kinetics data, suggesting the importance of the concentration dependency of the surface diffusion, which is implicitly reflected in the chemical potential gradient. The kinetic model predictions are also affected by the way how single-component adsorption equilibrium isotherm data are fitted.