On some electromagnetic phenomena in the tether magnetoplasma cloud

Summary The tethered satellite system (TSS) will be accompanied by a variety of electromagnetic phenomena. An independent interconnected formation, a ?tethered magnetoplasma cloud? (TMC), moving in space along the orbit of TSS, at an altitude of about 300 km, will be created. This time-dependent cloud will be a very complicated inhomogeneous formation including electromagnetic oscillations and waves of different type. Some of these waves will be observed on the Earth's surface. Rarefiel regions of the magnetoplasma behind, and dense regions in front of the shuttle orbiter (SO) and the subsatellite (SS) will arise. The neutral nitrogen beam ejected by the thruster becomes an ion beam on the day-light part of the orbit. Its energy is much greater than the local thermal energy. Instabilities of different kind as well as diffusion and recombination effects are expected to accompany the interaction of these beams with the surrounding plasma. The electron beams will produce other types of instabilities. By the electrons precessing along the magnetic-field lines, a current (5·10³V, 0.5 A) should be induced in the 20th km length conducting tether. It will be closed at the bottom of the ionosphere. This huge magnetic loop, so-called ?phantom loop? (PL), should accompany the tether system along its orbit. The length of this ?tether electromagnetic tail? (TEMT) is about 200 km, its magnetic moment will be about 10¹³ A·cm². Alfvén waves and nonlinear effects of heating type may be produced by this loop along the magnetic-field lines. ?Strings? of hot plasma may accompany the tether system.     

鄱阳湖总悬浮物浓度高光谱定量模型

以鄱阳湖为研究对象,利用地物波谱仪在湖区进行高光谱测量和同步的水体采样实验,通过研究鄱阳湖水体的光谱反射率特征和实测总悬浮物(TSS)浓度之间的关系,建立了TSS浓度的遥感定量模型.结果表明,由于悬浮物的反射作用出现双峰特征,红光与近红外部分波段是TSS的敏感区域,敏感性红光波段大于近红外波段;一阶微分处理的593nm处一阶导数数据和TSS浓度的一元二次方程为反演的最佳模型.研究成果可为今后卫星遥感大面积监测鄱阳湖TSS浓度奠定基础.     

Thermal Spin Squeezing as a Signature of Thermal Global Entanglement in Heisenberg Models

We study thermal spin squeezing (TSS) and thermal global entanglement (TGE) in a general Heisenberg spin chain, in the presence of Dzyaloshinskii-Moriya interaction and an external magnetic field. We derive an inequality associating the squeezing parameter and the global concurrence, which establishes (TSS) as a signature of (TGE). The inequality reduces to equality for particular symmetric chains which also associates TSS with bipartite entanglement in such systems. We also check the results by presenting two numerical examples.     

CO oxidation facilitated by robust surface states on Au-covered topological insulators

Surface states--the electronic states emerging as a solid material terminates at a surface--are usually vulnerable to contaminations and defects. The robust topological surface state(s) (TSS) on the three-dimensional topological insulators provide a perfect platform for exploiting surface states in less stringent environments. Employing first-principles density functional theory calculations, we demonstrate that the TSS can play a vital role in facilitating surface reactions by serving as an effective electron bath. We use CO oxidation on gold-covered Bi(2)Se(3) as a prototype example, and show that the robust TSS can significantly enhance the adsorption energy of both CO and O(2) molecules, by promoting different directions of static electron transfer. The concept of TSS as an electron bath may lead to new design principles beyond the conventional d-band theory of heterogeneous catalysis.     

Thermal Spin Squeezing as a Signature of Thermal Global Entanglement in Heisenberg Models

We study thermal spin squeezing (TSS) and thermal global entanglement (TGE) in a general Heisenberg spin chain, in the presence of Dzyaloshinskii-Moriya interaction and an external magnetic field. We derive an inequality associating the squeezing parameter and the global concurrence, which establishes (TSS) as a signature of (TGE). The inequality reduces to equality for particular symmetric chains which also associates TSS with bipartite entanglement in such systems. We also check the results by presenting two numerical examples.     

与哈姆林甜橙果实内在品质主要参数同步相关的特征光谱研究

基于光谱分析的甜橙内在品质检测技术近年得到较快发展,但目前采用的大多为单一品质指标的光谱分析,而甜橙果实品质往往取决于果实多项品质指标的共同作用。本研究的目的在于研究甜橙果实反射光谱与果实内在品质的相关性,筛选与哈姆林甜橙果实多个品质指标同步相关的特征光谱,为建立甜橙果实在内品质的实时检测技术提供依据。以哈姆林甜橙(Citrus sinensis (L) cv. Hamlin sweet orange)成熟果实为试材,逐个果实进行果实反射光谱和果实可溶性固形物(TSS)、柠檬酸、维生素C(Vc)含量和固酸比等在内品质主要参数的分析,对所获数据采用Excel,Spss Statg和View SpecPro软件进行统计与分析。结果表明,哈姆林甜橙果实TSS、固酸比和Vc均与波长988 nm近红外光反射光谱呈极显著或显著正相关,相关系数分别为0.387**,0.440**和0.309*,TSS和固酸比与该波长反射率的最佳拟合方程分别为y＝13.957x+5.405和y＝75.120x+37.256;可见光429 nm光谱二阶导数与TSS和Vc呈显著和极显著正相关,相关系数分别为0.350 72*和0.386 9**。波长944 nm近红外光谱倒数对数与固酸比呈显著正相关(r＝0.304*)。试验结果为柑桔果实内在品质主要参数的同步、快速无损检测奠定了基础。     

Gaussian Density Matrices: Quantum Analogs of Classical States

We study quantum analogs of classical situations, i.e. quantum states possessing some specific classical attribute(s). These states seem quite generally, to have the form of gaussian density matrices. Such states can always be parametrized as thermal squeezed states (TSS). We consider the following specific cases: (a) Two beams that are built from initial beams which passed through a beam splitter cannot, classically, be distinguished from (appropriately prepared) two independent beams that did not go through a splitter. The only quantum states possessing this classical attribute are TSS. (b) The classical Cramer's theorem was shown to have a quantum version (Hegerfeldt). Again, the states here are Gaussian density matrices. (c) The special case in the study of the quantum version of Cramer's theorem, viz. when the state obtained after partial tracing is a pure state, leads to the conclusion that all states involved are zero temperature limit TSS. The classical analog here are gaussians of zero width, i.e. all distributions are δ functions in phase space.     

Tethered-Satellite system (TSS): Preliminary results on the active experiment core equipment

Summary The first Tethered-Statellite System (TSS-1) Electrodynamic mission has been launched aboard the Space Shuttle STS-46 on July 31, 1992, as a joint mission between the United States and Italy. A 500 kg spherical Satellite (1.6 m diameter) attached to the Orbiter by a thin (0.24 cm), conducting, insulated wire (Tether), has been reeled upwards from the Orbiter payload bay to a distance of 257 m when the Shuttle was at a projected altitude of 300 km. ASI, the Italian Space Agency, had the responsibility for developing the reusable Satellite, while NASA had the responsibility for developing the Deployer system and the Tether, integrating the payload and providing transportation into space. One of the main scientific goals of this first mission was to demonstrate the possibility of energy conversion from mechanical to electrical by using a long Tether orbiting through the Earth's magnetic field. ASI designed and developed an active experiment, referred to as Core Equipment, in order to carry out this demonstration. The experiment used two Electron Generator Assemblies (EGAs), located on the Orbiter, to re-emit into the ionosphere as an electron beam the electrons collected on the Satellite from the ionosphere. Each EGA had the capability to emit an electron beam with a programmed intensity from 10 mA up to 750 mA with a resolution of 3 mA. The perveance of each EGA was 7.2 microperv, and the beam energy, up to 3 kV, was provided as part of the e.m.f. induced across the TSS due to its motion through the Earth's magnetic field. Other instruments provided current, voltage, and ambient-pressure measurements, and allowed, via a series of switches, different electrical configurations of the TSS. Moreover, the Core Equipment provided a dynamic package, to study the TSS dynamics, as a first goal, and to verify the possibility of using the TSS Satellite as a platform for future experiments in the microgravity field. The expected voltage across the TSS was estimated to be 5 kV for a full Tether deployment of 20 km. During the mission, and due to unforeseenable reasons, the Tether deployment achieved was only of 257 m. Despite this limitation, there is evidence that the experiment was working nominally in the very low-voltage range across the TSS. This result strongly increases the confidence in the possibility of high-voltage operation of the electrodynamic TSS, as the Tether deployment will achieve the 20 km, as expected in the future reflight. The paper describes the experiment, and reports some preliminary results achieved during the first mission. Paper presented at the 6th Cosmic Physics National Conference, Palermo, 3–7 November 1992.     

ITER CTB��������֧�Žṹ�봫����Ϸ���

根据ITER装置对CTB盒技术性能的要求,对CTB盒中冷屏的支撑部件进行了结构和传热的分析和设计。对结构形式的选择、结构强度的理论计算和支撑结构总的热损失进行了设计和计算,用ANSYS软件对该结构的非线性接触结构-热耦合问题进行了仿真分析。研究结果表明,球支撑结构既能够满足系统对支撑的结构安全要求,在有压接触情况下的漏热量符合ITER设计文集的规定。     

Electrical detection of spin-polarized current in topological insulator Bi1.5Sb0.5Te1.7Se1.3

Spin-momentum locked (SML) topological surface state (TSS) provides exotic properties for spintronics applications. The spin-polarized current, which emerges owing to the SML, can be directly detected by performing spin potentiometric measurement. We observed spin-polarized current using a bulk insulating topological insulator (TI), Bi_1.5Sb_0.5Te_1.7Se_1.3, and Co as the ferromagnetic spin probe. The spin voltage was probed with varying the bias current, temperature, and gate voltage. Moreover, we observed non-local spin-polarized current, which is regarded as a distinguishing property of TIs. The spin-polarization ratio of the non-local current was larger than that of the local current. These findings could reveal a more accurate approach to determine spin-polarization ratio at the TSS.     

Detection of quasitrapezoidal frequency and amplitude modulation

It has been proposed that the detection of frequency modulation (FM) of sinusoidal carriers can be mediated by two mechanisms; a place mechanism based on FM-induced amplitude modulation (AM) in the excitation pattern, and a temporal mechanism based on phase locking in the auditory nerve. The temporal mechanism appears to be "sluggish" and does not play a role for FM rates above about 10 Hz. It also does not play a role for high carrier frequencies (above about 5 kHz). This experiment provided a further test of the hypothesis that the effectiveness of the temporal mechanism depends upon the time spent close to frequency extremes during the modulation cycle. Psychometric functions for the detection of AM and FM were measured for two carrier frequencies, 1 and 6 kHz. The modulation waveform was quasitrapezoidal. Within each modulation period, P, a time Tss was spent at each extreme of frequency or amplitude. The transitions between the extremes, with duration Ttrans had the form of a half-cycle of a cosine function. The modulation rate was 2, 5, 10, or 20 Hz, giving values of P of 500, 200, 100, and 50 ms. TSS varied from 0 ms (sinusoidal modulation) up to 160, 80, 40, or 20 ms, for rates of 2, 5, 10, and 20 Hz, respectively. The detectability of AM was not greatly affected by modulation rate or by the value of TSS, except for a slight improvement with increasing TSS for the lowest modulation rates; this was true for both carrier frequencies. For FM of the 6-kHz carrier, the pattern of results was similar to that found for AM, which is consistent with an excitation-pattern model of FM detection. For FM of the 1-kHz carrier, performance improved markedly with increasing TSS, especially for the lower FM rates; there was no change in performance with TSS for the 20-Hz modulation rate. The results are consistent with the idea that detection of FM of a 1-kHz carrier is partly mediated by a sluggish temporal mechanism. That mechanism benefits from greater time spent at frequency extremes of the modulation cycle for rates up to 10 Hz.     

Manipulating Nonlinear Photocurrent from Interlayer Coupling in Bilayer Metamaterials for Polarized Terahertz Generation

Polarized terahertz (THz) wave generation is of great significance for chiral and anisotropic sensing applications. However, how to manipulate amplitude, polarization, and ellipticity of the THz generation is still a fundamental challenge. Herein, polarized THz wave generation is achieved from a bilayer metamaterial consisting of T-shaped structure (TSS) and split resonator rings (SRRs) by combining Maxwell and hydrodynamic equations. The elliptically polarized THz wave can be synthetized directly from horizontally and vertically polarized THz components due to the orthogonal nonlinear photocurrents along the arm-directions of TSS and SRRs, respectively. Besides, the ellipticity and the orientation angle of the THz polarization ellipse can be modulated by the twist angle between the SRRs and TSS layers. The maximum ellipticity can reach 0.34 while the orientation angle is tunable from −0.45 to 0.48π by tuning the twist angle. This work proposes an interlayer coupling method for the polarized THz sources based on metamaterials in potential circular dichroism and chiral sensing applications.     

Social Influence Maximization in Hypergraphs

This work deals with a generalization of the minimum Target Set Selection (TSS) problem, a key algorithmic question in information diffusion research due to its potential commercial value. Firstly proposed by Kempe et al., the TSS problem is based on a linear threshold diffusion model defined on an input graph with node thresholds, quantifying the hardness to influence each node. The goal is to find the smaller set of items that can influence the whole network according to the diffusion model defined. This study generalizes the TSS problem on networks characterized by many-to-many relationships modeled via hypergraphs. Specifically, we introduce a linear threshold diffusion process on such structures, which evolves as follows. Let H=(V,E) be a hypergraph. At the beginning of the process, the nodes in a given set S⊆V are influenced. Then, at each iteration, (i) the influenced hyperedges set is augmented by all edges having a sufficiently large number of influenced nodes; (ii) consequently, the set of influenced nodes is enlarged by all the nodes having a sufficiently large number of already influenced hyperedges. The process ends when no new nodes can be influenced. Exploiting this diffusion model, we define the minimum Target Set Selection problem on hypergraphs (TSSH). Being the problem NP-hard (as it generalizes the TSS problem), we introduce four heuristics and provide an extensive evaluation on real-world networks.     

The RETE experiment for the TSS-1 mission

Summary This paper describes the RETE (Research on Electrodynamic Tether Effects) experiment mounted on board the TSS (Tethered-Satellite System) satellite which was deployed on a cable from the space Shuttle Atlantis during the TSS mission flown in August 1992. The experiment layout and its modes of operation are described in detail. To give an idea of RETE capabilities and actual performance during the mission, samples of measurements are also presented.     

Effects of V2O5 addition on NiZn ferrite synthesized using two-step sintering process

The combined influence of a two-step sintering (TSS) process and addition of V₂O₅ on the microstructure and magnetic properties of NiZn ferrite was investigated. As comparison, samples prepared by the conventional single-step sintering (SSS) procedure were also studied. It was found that with 0.3 wt% V₂O₅ additive, the sample sintered by the two-step sintering process at a high temperature of 1250 °C for 30 min and a lower temperature of 1180 °C for 3 h exhibited more homogeneous microstructure and higher permeability with a high Q-factor. The results showed that the TSS method with suitable additive brought positive improvement of the microstructure and magnetic properties of NiZn ferrite.     

Influence of sintering conditions on the electrical properties of 10% ZrO2–10% Y2O3–CeO2 (mol%)

Yttria–zirconia doped ceria, 10% ZrO₂–10% Y₂O₃–CeO₂ (mol%) (CZY) and 0.5 mol% alumina-doped CZY (CZYA), prepared through oxide mixture process, were sintered by isothermal sintering (IS) and two-step sintering (TSS) having as variable the temperature and soaking time. The electrical conductivity of sintered samples was investigated in the 250 to 600 °C temperature range by impedance spectroscopy in air atmosphere. The microstructure was analyzed by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). Alumina, as additive, improves the grain boundary conductivity of samples sintered at temperatures lower than 1500 °C. Concerning the sintering mode, two-step sintering (TSS) proved to be a good procedure to obtain CZYA samples with high electrical conductivity and density (> 95%) at relatively low sintering temperature and long soaking time.     

Effect of ultrasound and enzymatic pre-treatment on yield and properties of banana juice

Effect of ultrasound and enzymatic pre-treatments with cellulase and pectinase on yield and properties of banana juice were investigated. A two-level full factorial design was employed. The factors selected were ultrasonication time (0 and 30 min), cellulase concentration (0 and 0.2%) and pectinase concentration (0 and 0.2%). The responses studied were yield, viscosity, clarity, total soluble solids (TSS) and pH. It was observed that pectinase was more effective in increasing the yield of juice compared to cellulase. Ultrasonic pre-treatment alone did not significantly increase the yield of juice. When ultrasound was combined with pre-treatment with both the enzymes maximum yield of 89.40% was obtained compared to 47.30% in the control. The viscosity of the juice decreased with addition of enzymes and with application of ultrasound. The clarity of the juice was not affected by cellulase treatment, but improved with pectinase treatment. Ultrasonication alone was found to be more effective than pectinase or cellulase treatment in improving the clarity of the juice. The TSS increased with enzymatic treatment, ultrasonication and their combination. pH was not affected by treatment type, but was found to be lower for the treated juices. Significant correlations were observed between the various responses.     

Acoustic remote sensing of swimbladder orientation and species mix in the oreo population on the Chatham Rise

A method for combining in situ measurements and theoretical swimbladder-derived estimates of target strength of the deep-water fish, black and smooth oreos, is described. The technique uses Monte Carlo simulation and yields fish length-target strength relationships suitable for use in estimating biomass from echo integration acoustic surveys. The relationships are derived from estimates of the mean and standard deviation of the tilt angle distributions of the wild fish generated by the method. The relationships may also be used to estimate proportions of the two oreo species in the wild. The mean tilt angle of black oreos in the wild was about 10 degrees with a standard deviation of 8 degrees. For smooth oreos it was close to zero with a standard deviation of about 4 degrees. The target strength relationships derived for biomass estimation purposes were TSB= -78.05+25.3 log10(L)+1.62 sin(0.0815L+0.238) and TSS = -82.16+24.6 log10(L)+1.03 sin(0.1165L-1.765), where L is the fish length and TSB and TSS are the target strengths of black and smooth oreos respectively.     

Radiation from long conducting tethers moving in the near-earth environment

Summary In connection with the presently developed TSS (tethered satellite system) project, we consider the problem of radiation of electromagnetic waves from a long conducting tether moving in the ionosphere. In particular, we address to radiation of low-frequency plasma modes, from ULF up to the electron cyclotron frequency. Both the case of a passive tether (no generator) and that of a tether driven as an antenna are considered. This work was partially supported by the Consiglio Nazionale delle Ricerche under contract No. 81.00952.     

TSS core equipment I.—Electrodynamic package and rationale for system electrodynamic analysis

Summary The first Tethered-Satellite System (TSS-1) Electrodynamic mission has been launched aboard the Space Shuttle STS-46 on July 31, 1992, as a joint mission between the United States and Italy. A 500 kg, spherical Satellite (1.6 m diameter), attached to the Orbiter by a thin (0.24 cm), conducting, insulated wire (Tether), has been reeled upwards from the Orbiter payload bay to a distance of 256 m, rather than the expected 20 km, when the Shuttle was at a projected altitude of 300 km. ASI, the Italian Space Agency, had the responsibility for developing the reusable Satellite, while NASA had the responsibility for developing the Deployer system and the Tether, integrating the payload and providing transportation into space. One of the main scientific goals of this first mission is to demonstrate the possibility of energy conversion from mechanical to electrical by using a long Tether orbiting through the Earth's magnetic field. ASI designed and developed an active experiment, referred to as Core Equipment, in order to carry out this demonstration, and to support all the scientific investigations related to the study of the TSS electrodynamic interactions with the Earth's ionosphere. The experiment uses two Electron Generator Assemblies (EGAs), located on the Orbiter, to re-emit into the ionosphere, as an electron beam, the electrons collected on the Satellite from the ionosphere. Other instruments provide current, voltage, and ambient pressure measurements, and allow, via a series of switches, different electrical configurations of the TSS. The Core Equipment was innovative for space experiments in general and Shuttle experiments in particular. In fact, it was the first flight in which the Shuttle has been used as an integral part of the experiment and not only as an observing platform. It was the first mission with an integrated approach to science, will all the instrumentation and their operative modes selected to characterize the electric properties of the TSS.