Binding of Ricinus communis agglutinin to a galactose-carrying polymer brush on a colloidal gold monolayer

A polymer with many pendent galactose residues was prepared by atom-transfer radical polymerization (ATRP) of galactose-carrying vinyl monomer, 2-lactobionamidoethyl methacrylate (LAMA), with a disulfide-carrying ATRP initiator, 2-(2'-bromoisobutyroyl)ethyl disulfide (DT-Br). The galactose-carrying polymer obtained (DT-PLAMA) was accumulated as a polymer brush via Au-S bond on a colloidal gold monolayer deposited on a cover glass. For comparison, a disulfide which carried one galactose residue at both ends (2-lactobionamidoethyl disulfide, Cys-Lac) was accumulated as a self-assembled monolayer (SAM) on the colloidal gold monolayer, too. The association and dissociation processes of galactose residues on the colloidal gold with a lectin, Ricinus communis agglutinin (RCA(120)), were observed by the increase and decrease in absorbance at 550nm corresponding to localized surface plasmon resonance (LSPR) phenomena. The Cys-Lac SAM-carrying glass chip showed a strong non-specific adsorption of the lectin, whereas the DT-PLAMA brush-carrying one reversibly associated with the lectin, indicating reusability of the latter device. The apparent association constant of the lectin with the galactose residues in the DT-PLAMA brush was much larger than the association constant for free galactose, and the detection limit of RCA(120) by the glycopolymer brush-modified device was satisfactorily low. Furthermore, a microscopic observation clearly indicated that the DT-PLAMA brush could reversibly associate with a HepG2 cell having galactose receptors, though these processes could not be observed spectrophotometrically due to a gigantic size of the cell.     

Recognition between a divalent sialyl molecule and wheat germ agglutinin

Structural divalency between a designed N-acetyl-neuraminic acid (NeuAc)-containing molecule and lectin wheat germ agglutinin (WGA) is investigated. The sialyl molecule was designed based on the NeuAc-WGA complex in the Protein Data Bank and featured polyethylene glycol linkers connecting to an aromatic scaffold. Our results elucidate the divalent recognition association constant between WGA and the multivalent-NeuAc molecules to be 10⁷ by surface plasmon resonance.     

Voltammetric sensing of sugar by an electrode covered with wheat germ agglutinin/chitin film

The binding between wheat germ agglutinin (WGA) and N-acetylglucosamine at the electrode covered with chitin film was investigated with voltammetry. Chitin, β-1,4-poly-N-acetylglucosamine, is one of the biolpolymers which have a high biocompatibility. WGA is immobilized to the surface of chitin film by the affinity of WGA to N-acetylglucosamine residue of chitin. To investigate the binding event of WGA on the chitin modified electrode, N-acetylglucosamine labeled with an electroactive compound was prepared. The binding causes the changes in the electrode response of labeled sugar. The peak current of labeled sugar decreased due to the specific binding with WGA on the chitin film modified at the electrode. N-Acetylglucosamine was successfully determined by using the competitive reaction with labeled sugar to WGA on the chitin film electrode.     

Efficient wheat germ agglutinin purification with a chitosan‐based affinity chromatographic matrix

An efficient affinity chromatographic matrix based on chitosan for wheat germ agglutinin (WGA) purification was developed. The matrices assayed consisted of chitosan mini‐spheres cross‐linked with epichlorhydrin 45, 250 or 500 mM. The maximum adsorption capacity of pure WGA – calculated from the corresponding isotherms – was between 43.2 and 48.9 mg/g at pH 5.0 and between 16.6 and 27.6 mg/g at pH 8.5. However, the adsorption of agglutinin from wheat germ extract was higher at pH 8.5. In addition, 0.5 g of mini‐spheres cross‐linked with epichlorhydrin 250 mM adsorbed 94.5% of the WGA present in 5 mL of the concentrated extract. Acetic acid was able to elute 100% of the adsorbed WGA. The purity of the WGA obtained was greater than 95% and the purification factor was 56.8. The matrix was able to maintain an efficient performance of the purification process for three consecutive cycles. A new method to monitor the purification process by RP‐HPLC was developed.     

Sensing capabilities of colloidal gold modified with a self-assembled monolayer of a glucose-carrying polymer chain on a glass substrate

A disulfide-carrying polymer with pendent glucose residues (poly(2-methacryloyloxyethyl D-glucopyranoside)) was obtained by using a benzyl N,N-diethyldithiocarbamoyl derivative which shows the abilities of initiation, chain transfer, and termination (iniferter). The disulfide-carrying polymer was accumulated on a colloidal Au-immobilized glass substrate, and the usefulness of the polymer as a sensing element of concanavalin A (Con A) was examined by using a UV-visible spectrophotometer with the help of surface plasmon resonance. The sensor showed a concentration-dependent specific binding of Con A with a detection limit of 1.9 nM, and furthermore, it had a very high stability at high ionic strength. The polymer-coated device examined here was not only useful as a simple biosensor chip but is also expected to expand our knowledge of interfacial phenomena by introducing various functional polymers on colloidal Au.     

Voltammetric evaluation for the binding of wheat germ agglutinin to glucosamine-modified magnetic microbead

Binding of wheat germ agglutinin (WGA) on glucosamine-modified magnetic microbeads was investigated with voltammetry. A magnetic bead was considered as a cell, and the beads with amino groups were modified with the sugar by using a cross-linking reagent. To evaluate the binding, glucose labeled with an electroactive daunomycin was prepared as a probe. After WGA and the beads were mixed in 0.1 M phosphate buffer (pH 7.0), the labeled glucose was added to the solution. The binding was monitored from the changes in the electrode response of labeled glucose because the labeled glucose was held to the binding site of WGA for the sugar. In contrast, other lectin not having the binding site to glucosamine or glucose was incubated with the glucosamine-modified beads. As a result, the change of peak current was not observed. Therefore, it is clear that the binding of WGA to glucosamine moiety on the bead surface selectively takes place. This method would be powerful for evaluation of interaction between protein and sugar chain existing at cell surface.     

麦胚凝集素亲和色谱富集糖肽过程中的肽键裂解

蛋白质的糖基化是最重要的翻译后修饰之一,与蛋白质结构和功能的关系密切。凝集素亲和色谱是蛋白质糖基化研究中很常用的工具,不同的凝集素可以对不同的单糖或寡糖有特异的富集作用。麦胚凝集素（WGA）由于其特异作用的糖型广泛存在而成为使用最多的凝集素之一。在本研究中,发现将WGA用于糖肽亲和富集会导致部分肽段的降解,从而导致后续的肽段序列分析的失败。本文用4种标准蛋白质对这种现象进行了验证,结果表明肽段的降解可以发生在多个位点,其中较多地发生在酪氨酸、苯丙氨酸及亮氨酸的羧基端。这一结果提示：在糖蛋白质组研究中,如果应用WGA富集糖肽并采用质谱进行鉴定,则采用半酶切或非特异性酶切的检索策略更为合适。     

Layer-by-layer immobilization of horseradish peroxidase on a gold electrode modified with colloidal gold nanoparticles

An amperometric biosensor, based on layer-by-layer self-assembly of colloidal gold nanoparticles, cysteine and horseradish peroxidase on Nafion modified electrode surface by electrostatic adsorption, has been used for the determination of hydrogen peroxide. The electrochemical behavior of the multilayer film was studied by cyclic voltammetry, linear sweep voltammetry and chronoamperometry. The step layer-by-layer adsorption interface morphology was further characterized by means of electrochemical impedance spectroscopy and cyclic voltammetry. The performance and factors influencing the resulted biosensor were studied in detail. The sensor displayed an excellent electrocatalytic response to the reduction of H₂O₂ without the aid of an electron transfer mediator. Linear response to H₂O₂ was obtained for the concentration range from 1.6 μM to 2.4 mM under optimized conditions. The detection limit of the biosensor was 0.5 μM (S/N = 3), and the sensor achieved 95% of the steady-state current within 10 s. The sensor exhibited high sensitivity, selectivity and stability. Correspondence: Yan Liu, College of Chemistry, Chongqing Normal University, Chongqing 400047, P.R. China     

Mechanics of nanoindentation on a monolayer of colloidal hollow nanoparticles

We explore the collective mechanical behavior of monolayer assemblies composed of close-packed arrays of hollow silica nanoparticles using a spherical nanoindentor. Seven types of well-defined hollow nanoparticles are studied with their radii ranging from 100 to 300 nm and shell thickness ranging from 14 to 44 nm. Micromechanical models reveal the underlying deformation mechanisms during indentation, where the consecutive contacting of the indentor with an increasing number of nanoparticles results in a nonlinear increase in the indentation force with penetration depth. Each contacted hollow nanoparticle successively locally bends, flattens, and then locally buckles. The effective indentation modulus of the monolayer film, which is obtained by a Hertzian fit to the experimental data, is found to be proportional to the elastic modulus of the nanoparticle shell material and scales exponentially with the ratio of particle shell thickness t to radius R to the power of 2.3. Furthermore, we find that for a constant film density with the same (t)/(R) of the constituent nanoparticles, smaller particles with a thinner shell can provide a higher effective indentation modulus, compared to their larger diameter and thicker shell counterparts. This study provides useful insights and guidance for constructing high-performance lightweight nanoparticle films and coatings with potential applications in tailoring stiffness and mechanical energy absorption.     

Generation of a dynamic combinatorial library using sialic acid aldolase and in situ screening against wheat germ agglutinin

This paper describes the generation of a dynamic combinatorial library of sialic acid analogues using sialic acid aldolase. Addition of wheat germ agglutinin to the equilibrating libraries results in selective amplification of one or more members.     

Enzymatic nanolithography of a self-assembled oligonucleotide monolayer on gold

This paper describes a simple strategy to biochemically manipulate a surface at the nanoscale by enzyme dip-pen nanolithography using an endonuclease (DNase I) that is directly patterned on a self-assembled monolayer presenting a terminal oligonucleotide. Physisorbed nanopatterns of DNase I carried out nanoscale enzymology at the surface creating oligonucleotide patterns with the fidelity of the patterned enzyme because of the affinity of the enzyme for the immobilized, oligonucleotide substrate.     

Electrochemical properties of a gold electrode modified with a mixed monolayer

The electrochemical properties of a gold electrode modified with a mixed thiol monolayer containing both a polar and a non-polar head group have been investigated in aqueous Fe(CN)₆⁴⁻, flavin adenine dinucleotide (FAD) and ubiquinone-0 (2,3-dimethoxy-5-methyl-1,4-benzoquinone, UQ₀) solutions. The cyclic voltammetric current-potential (i-E) response of Fe(CN)₆⁴⁻ was found to be affected considerably by the polarity of the head group contained in the mixed monolayer assembly, as compared with those of FAD and UQ₀. It was also found that in the cases of UQ₀ and FAD the i-E responses for the modified electrode were affected by their own molecular size rather than the polarity of the mixed monolayer head group. Furthermore, compared with Fe(CN)₆⁴⁻ ion, these biologically related molecules are able to permeate readily into the well-organized and hydrophobic alkyl chains of the monolayer assembly. The voltammetric profile of UQ₀ was improved by the modification of aminoethanethiol, as compared with those of bare gold and the electrode modified with other polar thiols. Further, two different permeation paths of the electrode species into the mixed monolayer are suggested from the variation of the i-E response with the cycle of the potential scan.     

Recognition of sugars on surface-bound cap-shaped gold particles modified with a polymer brush

A dithiolated random copolymer with pendent phenylboronic acid residues (Cys-Poly(3-acrylamidophenylboronic acid-co-2-dimethylaminopropyl methacrylamide), Cys-Poly(APBA-co-DMAPMA)) obtained by photo-iniferter method was accumulated as a polymer brush on a cap-shaped gold particles deposited on a vacuum-evaporated gold film, and the usefulness of the polymer brush as a sensing element for glycoprotein, ovalbumin (OVA), was examined by using UV-vis spectroscopy with a help of surface plasmon resonance. A similar system was constructed with a dithiolated mannose-carrying polymer, dithiolated-poly(2-methacryloyloxyethyl-D-mannopyranoside) (DT-PMEMan), prepared by the atom transfer radical polymerization (ATRP). The brush composed of this polymer was examined as a sensing element for lectin, concanavalin A (Con A). The sensor cells modified with Cys-Poly(APBA-co-DMAPMA) and DT-PMEMan showed a concentration-dependent binding of OVA and Con A, respectively, with a comparable detection limit to those with a monolayer of polymer brush-coated gold particle deposited on a glass substrate. Using this system, it can be expected to open a new perspective to various functional polymer brushes fixed to the cap-shaped gold particle on a solid substrate.     

Differences in the redistribution of concanavalin A and wheat germ agglutinin binding sites on mouse neuroblastoma cells.

Concanavalin A (Con A), wheat germ agglutinin (WGA), and Ricinus communis agglutinin (RCA) bound with either 125I, fluorescent dyes, or fluorescent polymeric microspheres were used to quantitate and visualize the distribution of lectin binding sites on mouse neuroblastoma cells. As viewed by fluorescent light and scanning electron microscopy, over 10(7) binding sites for Con A, WGA, and RCA appeared to be distributed randomly over the surface of differentiated and undifferentiated cells. An energy-dependent redistribution of labeled sites into a central spot occurred when the cells were labeled with a saturating dose of fluorescent lectin and maintained at 37 degrees C for 60 min. Reversible labeling using appropriate saccharide inhibitors indicated that the labeled sites had undergone endocytosis by the cell. A difference in the mode of redistribution of WGA or RCA and Con A binding sites was observed in double labeling experiments. When less than 10% of the WGA or RCA lectin binding sites were labeled, only these labeled sites appeared to be removed from the cell surface. In contrast, when less than 10% of the Con A sites were labeled, both labeled and unlabeled Con A binding sites were removed from the cell surface. Cytochalasin B uncoupled the coordinate redistribution of labeled and unlabeled Con A sites, suggesting the involvement of microfilaments. Finally, double labeling experiments employing fluorescein-tagged Con A and rhodamine-tagged WGA indicate that most Con A and WGA binding sites reside on different membrane components and redistribute independenty of each other.     

Voltammetric evaluation of the binding between wheat germ agglutinin and thionine/glucose-modified magnetic microbeads.

The binding between glucose residues and wheat germ agglutinin (WGA) on thionine/glucose-modified magnetic microbeads was evaluated using voltammetry. Thionine is an electroactive compound and has two amino groups. Thionine was immobilized to magnetic beads via cross-linking of the amino groups on the beads with an amino group on thionine. Glucose was bound to the other amino group of thionine via the formation of a Schiff base. The beads were only several micrometers in size the same size, as cells. WGA-binding to glucose on the bead surface blankets the thionine moiety. Thus, WGA-binding could be detected as a decrease in peak current of the thionine moiety.     

Voltammetric investigation of cytochrome c on gold coated with a self-assembled glutathione monolayer

The direct, reversible electrochemistry of horse-heart cytochrome c (cyt. c) was realized on a self-assembled glutathione (GSH) monolayer modified Au electrode. The voltammetric responses of cyt. c on GSH/Au electrode were found to be affected by pH during the electrode modification, metal ions and surfactants. Using potassium ferricyanide [K4Fe(CN)6] as a probe, these effects on the voltammetric responses of cyt. c were characterized by electrochemical methods. It was found that the pH during the electrode modification, metallic ions and surfactants changed GSH monolayer's charge state and the conformation on the electrode surface, and resulted in the influence on the voltammetric responses of cyt. c. The experimental results provided us information to understand the mechanism of the interfacial electron transfer of electrode-protein, as well as the electron transfer of cyt. c in life system.     

Two-dimensional crystal structure of a quaterthiophene-alkanethiol self-assembled monolayer on gold

We investigated the fine structure of a self-assembled monolayer of dodecanethiol functionalized by alpha-quaterthiophene on gold (alpha-4TC 12H 24SH). The molecular orientation, quantified using polarization modulation infrared reflection-absorption spectroscopy, was studied as a function of the adsorption time. The alpha-4T moieties arrange in the upright position on the surface as the adsorption time increases, while the alkyl chain organization remains poor. Here we quantify the orientation of the self-assembled monolayer and, more significantly, reveal through surface X-ray diffraction that after a long incubation period (12 h) the alpha-4T on the gold surface adopts a 2D crystal structure.     

Stereo-electrochemistry by a self-assembled monolayer of sulfur-bridged calixthiophene on gold

Sulfur-bridged calixthiophene formed a self-assembled mono-molecular layer on polycrystalline gold, and it regulated an electrochemical electron transfer by the host–guest interaction between the cavity and reactants. 1,7,13,19,25-Tetrathia[1.₅](2,5)thiophenophane (thiacalix[5]thiophene) perfectly passivated the gold electrode for relatively large reversible metal complexes: [Fe(CN)₆]^4−/3− and [IrCl₆]^3−/2−. However, for mono-atomic ions, such as silver and some of the halogen ions, the electrode behaved reversibly. For copper reduction, a large activation overpotential was observed to induce an initial copper reduction in the cavity.     

Towards "designer" surfaces: functionalisation of self-assembled monolayer (SAM) on colloidal gold by alkene metathesis

A variety of groups like a Fischer carbene complex, an N-hydroxysuccinimide or a ferrocene derivative have been grafted by ruthenium-catalyzed cross-metathesis reaction with terminal alkene groups on monolayer-protected gold clusters as a mild and convenient strategy to anchor functional molecules.     

Underpotential deposition of copper on electrodes modified with colloidal gold

This communication is concerned with the electrochemical addressability of gold colloidal particles deposited on a conducting substrate. Cyclic voltammetry of electrodes modified with gold colloid layers indicates that an underpotential deposition of copper onto the gold surface takes place. Analysis of the charge associated with the underpotential deposition permits the electroactive gold area to be calculated. The total gold area may be determined from transmission electron microscopy (TEM) images. Comparison of the geometric and electroactive areas obtained indicates that electrochemically all the gold particles are addressable and the entire colloid surface is accessible.