Photocatalytic degradation of methyl methacrylate copolymers

The photolytic and photocatalytic degradation of the copolymers poly(methyl methacrylate-co-butyl methacrylate) (MMA-BMA), poly(methyl methacrylate-co-ethyl acrylate) (MMA-EA) and poly(methyl methacrylate-co-methacrylic acid) (MMA-MAA) have been carried out in solution in the presence of solution combustion synthesized TiO₂ (CS TiO₂) and commercial Degussa P-25 TiO₂ (DP 25). The degradation rates of the copolymers were compared with the respective homopolymers. The copolymers and the homopolymers degraded randomly along the chain. The degradation rate was determined using continuous distribution kinetics. For all the polymers, CS TiO₂ exhibited superior photo-activity compared to the uncatalysed and DP 25 systems, owing to its high surface hydroxyl content and high specific surface area. The time evolution of the hydroxyl and hydroperoxide stretching vibration in the Fourier transform-infrared (FT-IR) spectra of the copolymers indicated that the degradation rate follows the order MMA-MAA > MMA-EA > MMA-BMA. The same order is observed for the rate coefficients of photocatalytic degradation. The photodegradation rate coefficients were compared with the activation energy of pyrolytic degradation. In degradation by pyrolysis, it was observed that MMA-BMA was the least stable followed by MMA-EA and MMA-MAA. The observed contrast in the order of thermal stability compared to the photo-stability of these copolymers was attributed to the two different mechanisms governing the scission of the polymer and the evolution of the products.     

Thermal degradation of poly(ethyl methacrylate) and its copolymer with poly(ethyl acrylate)

The thermal degradation behaviour of poly(ethyl methacrylate) homopolymers and poly(ethyl methacrylate) and poly(ethyl acrylate) copolymers synthesized by using the benzoyl peroxide-di-methyl aniline redox pair at different temperatures (18–35C) was investigated. Contrary to some reports in the literature, the thermal degradation of PEMA was observed to take place in multi steps. These are assigned to be loss of labile end groups, side chain scission, anhydride formation and main chain degradation steps. Dominating chemical formations at the end of these steps were characterized by FTIR spectroscopy.The homopolymer samples synthesized at 18C showed a greater thermal stability against degradation. Copolymerization with small amounts of ethyl acrylate was observed to impart thermal stability to PEMA by stabilizing mainly the end groups against degradations.     

Thermal stability of copolymers of vinyl acetate and methyl acrylate

The thermal degradation of a series of copolymers of vinyl acetate and methyl acrylate and the two homopolymers poly(vinyl acetate) and poly(methyl acrylate) obtained using Ce(IV) as initiator has been investigated using differential thermal analysis (DTA) and thermogravimetry (TGA) in dynamic nitrogen. The kinetic parameters E, n, and A have been obtained following several methods of thermogravimetric analyses. The stability increases as the methyl acrylate content in the copolymer composition increases. The incorporation of 5 mol % of vinyl acetate in the copolymer produces a marked decrease in stability compared to the homopolymer poly(methyl acrylate). There is evidence for an intramolecular lactonization process in vinyl acetate—methyl acrylate copolymers.     

Thermal degradation of copolymers of methyl methacrylate and methyl acrylate. I. Products and general characteristics of the reaction

The technique of thermal volatilization analysis (TVA), applied to methyl methacrylate–methyl acrylate copolymers having molar composition ratios 112/1, 26/1, 7.7/1, and 2/1, has demonstrated that the stabilization of poly(methyl methacrylate) by copolymerized methyl acrylate is due to inhibition of the depolymerization initiated at terminally unsaturated structures, probably by direct blockage by methyl acrylate units. The molecular weight of the copolymers decreases rapidly during degradation, suggesting that a random scission process is involved. The products of degradation consist of the monomers, carbon dioxide, chain fragments larger than monomer, and a permanent gas fraction which is principally hydrogen. Infrared and ultraviolet spectral measurements suggest that the residual polymer, which is colored, incorporates carbon–carbon unsaturation. The complete absence of methanol among the products is surprising in view of its abundance among the products of degradation of poly(methyl acrylate). These observations have been accounted for qualitatively in terms of acceptable polymer behavior.     

Thermal degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers

Vinylidene chloride polymers containing comonomer units capable of consuming evolved hydrogen chloride to expose good radical-scavenging sites might be expected to display greater thermal stability than similar polymers containing simple alkyl acrylates as comonomer. Incorporation of a comonomer containing the phenyl t-butyl carbonate moiety into a vinylidene chloride polymer has the potential to afford a polymer with pendant groups which might interact with hydrogen chloride to expose phenolic groups. Copolymers of vinylidene chloride with [4-(t-butoxycarbonyloxy)phenyl]methyl acrylate have been prepared, characterized, and subjected to thermal degradation. The degradation has been characterized by thermal and spectroscopic techniques. The degradation of vinylidene chloride/[4-(t-butoxycarbonyloxy)phenyl]methyl acrylate copolymers is much more facile than the same process for similar copolymers containing either [4-(isobutoxycarbonyloxy)phenyl]methyl acrylate or methyl acrylate, a simple alkyl acrylate, as comonomer. During copolymer degradation, [4-(t-butoxycarbonyloxy) phenylmethyl acrylate units are apparently converted to acrylic acid units by extensive fragmentation of the sidechain. Thus, the phenyl t-butyl carbonate moiety does function as a labile acid-sensitive pendant group but its decomposition in this instance leads to the generation of a phenoxybenzyl carboxylate capable of further fragmentation.     

New initiator system for the anionic polymerization of (meth)acrylates in toluene. IV. Random copolymerization of (meth)acrylates in toluene initiated by s-BuLi ligated by lithium silanolates

Copolymerization of binary mixtures of alkyl (meth)acrylates has been initiated in toluene by a mixed complex of lithium silanolate  (s-BuMe₂SiOLi) and s-BuLi (molar ratio > 21) formed in situ by reaction of s-BuLi with hexamethylcyclotrisiloxane (D₃). Fully acrylate and methacrylate copolymers, i.e., poly(methyl acrylate-co-n-butyl acrylate), poly(methyl methacrylate-co-ethyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(methyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate), poly(isobornyl methacrylate-co-n-butyl methacrylate) of a rather narrow molecular weight distribution have been synthesized. However, copolymerization of alkyl acrylate and methyl methacrylate pairs has completely failed, leading to the selective formation of homopoly(acrylate). As result of the isotactic stereoregulation of the alkyl methacrylate polymerization by the s-BuLi/s-BuMe₂SiOLi initiator, highly isotactic random and block copolymers of (alkyl) methacrylates have been prepared and their thermal behavior analyzed. The structure of isotactic poly(ethyl methacrylate-co-methyl methacrylate) copolymers has been analyzed in more detail by Nuclear Magnetic Resonance (NMR). © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2525–2535, 1999     

Thermal degradation and stability of poly(4-vinylpyridine) homopolymer and copolymers of 4-vinylpyridine with methyl acrylate

The thermal stability and degradation behaviour of poly(4-vinylpyridine) (PVP) homopolymer and copolymers of 4-vinylpyridine and methyl acrylate (VP-MA) have been investigated. The reactivity ratios in the copolymerization were determined using an NMR method. The apparent activation energies of the degradation of the homopolymers and copolymers were calculated using the Arrhenius equation.     

Synthesis and characterizations of the four‐armed amphiphilic block copolymer S[poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate)]4

The polymers poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate] (PDMDMA) and four‐armed PDMDMA with well‐defined structures were prepared by the polymerization of (2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate (DMDMA) in the presence of an atom transfer radical polymerization (ATRP) initiator system. The successive hydrolyses of the polymers obtained produced the corresponding water‐soluble polymers poly(2,3‐dihydroxypropyl acrylate) (PDHPA) and four‐armed PDHPA. The controllable features for the ATRP of DMDMA were studied with kinetic measurements, gel permeation chromatography (GPC), and NMR data. With the macroinitiators PDMDMA–Br and four‐armed PDMDMA–Br in combination with CuBr and 2,2′‐bipyridine, the block polymerizations of methyl acrylate (MA) with PDMDMA were carried out to afford the AB diblock copolymer PDMDMA‐b‐MA and the four‐armed block copolymer S{poly[(2,2‐dimethyl‐1,3‐dioxolane‐4yl) methyl acrylate]‐block‐poly(methyl acrylate)}₄, respectively. The block copolymers were hydrolyzed in an acidic aqueous solution, and the amphiphilic diblock and four‐armed block copolymers poly(2,3‐dihydroxypropyl acrylate)‐block‐poly(methyl acrylate) were prepared successfully. The structures of these block copolymers were verified with NMR and GPC measurements. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3062–3072, 2001     

The thermal degradation of poly(vinyl acetate) and poly(ethylene-co-vinyl acetate), Part I: Experimental study of the degradation mechanism

The thermal degradation mechanism of poly(vinyl acetate) (PVAc) and poly(ethylene-co-vinyl acetate) (EVA) copolymers was investigated with solid-state NMR, thermogravimetry coupled with mass spectrometry and differential thermal analysis. Between 300 and 400 °C acetic acid is eliminated (deacetylation), leaving a highly unsaturated residue or polyene. The deacetylation of PVAc is autocatalytic. Upon incorporation of ethylene entities into the polymer backbone, autocatalysis disappears. Between 400 and 500 °C, the polyene will degrade further by chain scission reactions in inert conditions or aromatise in an oxidative environment into a char, and oxidised eventually into CO₂ beyond 500 °C.In inert conditions, the deacetylation step as well as the chain scission reaction shows endothermic effects. In an oxidative environment, large exothermal effects are found for each degradation step. This indicates the occurrence of additional oxidation reactions during deacetylation, an important reorganisation of the polyene during char formation and oxidation of the latter into CO₂.     

原子转移自由基聚合制备聚(甲基丙烯酸甲酯-b-苯乙烯)时单体聚合顺序对嵌段效率的影响

采用原子转移自由基聚合研究了聚（ 甲基丙烯酸甲酯 ｂ 苯乙烯） 嵌段共聚物的合成,实验结果表明,当先进行甲基丙烯酸甲酯的聚合,然后再进行苯乙烯的聚合时,得到了完全的嵌段共聚物;反之,如果改变单体的聚合顺序,则嵌段效率很低．用聚合物末端Ｃ—Ｘ（Ｘ＝ Ｃｌ,Ｂｒ） 键的断裂能对实验结果进行了解释．     

Thermal degradation of bromine-containing polymers. Part 3—Blends of poly(2-bromoethyl methacrylate) and poly(methyl acrylate)

Films of a blend of equal weights of poly(2-bromoethyl methacrylate) (P2BEM) and poly(methyl acrylate) (PMA) were prepared by evaporation of a solution in acetone. The principal characteristics and products of the thermal degradation of the blend were established by the application of thermal analysis and infra-red and mass spectrometric techniques. Similarities to the degradation behaviour of copolymers of 2-bromoethyl methacrylate (2BEM) and methyl acrylate (MA) were noted.     

Thermal degradation of copolymers of methyl methacrylate and methyl acrylate. II. Chain scission and the mechanism of the reaction

It has been established that one molecule of carbon dioxide is produced for each chain scission during degradation of methyl methacrylate–methyl acrylate copolymers with molar compositions in the ratios 112/1, 26/1, 7.7/1, and 2/1. Thus the relatively simple measurement of the production of carbon dioxide can be used to determine the extent of chain scission. In this way the relationships between chain scission and volatilization, zip length, copolymer composition, and the production of permanent gases have been established. The rate of chain scission is proportional to a power of the methyl acrylate content of the copolymer less than 0.5, from which it has been concluded that a significant proportion of the initial production of radicals and the subsequent attack of these radicals on the polymer chains is at random and not specifically associated with the methyl acrylate units. A mechanism for the overall thermal degradation process in this copolymer system is presented in the light of these observations.     

Biosourced All-Acrylic ABA Block Copolymers with Lactic Acid-Based Soft Phase

Lactic acid is one of the key biobased chemical building blocks, given its readily availability from sugars through fermentation and facile conversion into a range of important chemical intermediates and polymers. Herein, well-defined rubbery polymers derived from butyl lactate solvent were successfully prepared by reversible addition–fragmentation chain transfer (RAFT) polymerization of the corresponding monomeric acrylic derivative. Good control over molecular weight and molecular weight distribution was achieved in bulk using either monofunctional or bifunctional trithiocarbonate-type chain transfer agents. Subsequently, poly(butyl lactate acrylate), with a relative low T_g (−20 °C), good thermal stability (5% wt. loss at 340 °C) and low toxicity was evaluated as a sustainable middle block in all-acrylic ABA copolymers using isosorbide and vanillin-derived glassy polyacrylates as representative end blocks. Thermal, morphological and mechanical properties of copolymers containing hard segment contents of <20 wt% were evaluated to demonstrate the suitability of rubbery poly(alkyl lactate) building blocks for developing functional sustainable materials. Noteworthy, 180° peel adhesion measurements showed that the synthesized biosourced all-acrylic ABA copolymers possess competitive performance when compared with commercial pressure-sensitive tapes.     

Photodegradation of poly(methyl methacrylate)

The vacuum photodegradation at 30°C. of poly(methyl methacrylate) and copolymers with acrylaldehyde, methacrylaldehyde, and methyl acrylate has been studied. The polymers were examined in the form of expanded films as produced by a freeze-drying technique. At least one molecule of carbon monoxide is evolved for each chain scission. It is concluded that chain scission in poly(methyl methacrylate) is primarily the result of photoinduced aldehyde groups.     

Thermal Degradation Behavior of Vinyl Ketone Polymers and Copolymers with Styrene

Thermal degradation behavior of six alkyl vinyl ketone (RVK) polymers and copolymers with styrene was investigated by means of infrared spectrometry (IR), thermogravimetry (TG), derivative TG (DTG), and differential scanning calorimetry (DSC). The observed TG curves of the RVK polymers changed with both structure of their substituents and initiators used, and the temperature of the beginning of weight loss for the radical polymers increased in the order: poly(methyl isopro-penyl ketone) < poly(methyl vinyl ketone) < poly(ethyl vinyl ketone) < poly(isopropyl vinyl ketone) < poly(tert-butyl vinyl ketone). From the infrared spectral determination of thermally degraded polymers, the formation of a cyclized structure was observed. It was also found from the results of thermal degradation of the RVK copolymers with styrene at 210° C that the formation of such a cyclized unit tended to increase in the order: tert-butyl vinyl ketone < isopropyl vinyl ketone < ethyl vinyl ketone < methyl vinyl ketone.     

Pyrolysis of poly(2-propylheptyl acrylate)

The thermal destruction processes of poly(2-propylheptyl acrylate) take place at the range of temperature 250–950 °C was investigated using pyrolysis–gas chromatography. Knowledge of the types and amounts of pyrolysis products will provide important information about the thermal degradation of homopolymer poly(2-propylheptyl acrylate) and the mechanisms involved. Unsaturated monomers 2-propylheptyl acrylate and 2-propylheptyl methacrylate, according to by-product alkyl alcohol 2-propylheptylalcohol, alkene 2-propylheptene-1, carbon dioxide, carbon monoxide, methane, and ethane were formed during thermal degradation of poly(2-propylheptyl acrylate).     

Thermal-, photothermal- and photodegradation of copolymers of methyl methacrylate and maleic anhydride

Rates of volatilisation and chain scission have been measured in the thermal degradation, photodegradation in solution, photodegradation in thin films and photothermal degradation of poly(methyl methacrylate) and a series of copolymers of methyl methacrylate with maleic anhydride. In each case the rate of volatilisation is depressed by the maleic anhydride units. On the other hand, rates of chain scission are accelerated by maleic anhydride except in the case of photothermal degradation. These results are discussed from a mechanistic point of view.     

Thermogravimetric analysis of poly(alkyl methacrylates) and poly(methylmethacrylate-g-dimethyl siloxane) graft copolymers

The thermal stabilities of various poly(alkyl methacrylate) homopolymers and poly(methyl methacrylate-g-dimethyl siloxane) (PMMA-g-PSX) graft copolymers have been determined by thermogravimetric analysis (TGA). As expected, the thermal stabilities of poly(alkyl methacrylates) were a function of the ester alkyl group, and polymerization mechanism. In particular, thermally labile linkages, which result from termination during free radical or nonliving polymerization mechanisms, decrease the ultimate thermal stabilities of the polymers. However, graft copolymers, which were prepared by the macromonomer technique with free radical initiators, exhibited enhanced thermal stability compared to homopolymer controls. A more complex free radical polymerization mechanism for the macromonomer modified polymerization may account for this result. © 1994 John Wiley & Sons, Inc.     

Synthesis of phenyl-s-triazine-based copoly(aryl ether)s derived from hydroquinone and resorcinol

A novel series of soluble and heat-resistant copoly(arylene ether phenyl-s-triazine)s (PAEPs) have been prepared for their potent utilities as structural coatings, high-temperature membranes or adhesives. The copolymers have been synthesized via the nucleophilic displacement polymerization of 2,4-bis(4-fluorophenyl)-6-phenyl-1,3,5-triazine (BFPT) with various ratios of hydroquinone (HQ) and resorcinol (RS). A key feature of these copolymers is the incorporation of multiply meta-ether linkages in the polymer chain, which results in an improvement in the solubility of poly(arylene ether phenyl-s-triazine)s in common organic solvents (e.g., N,N’-dimethylacetamide, N,N’-dimethylformamide, N-methyl-2-pyrrolidinone). The new random copolymers exhibit high glass transitions exceeding 241 °C and excellent thermal and thermo-oxidative stabilities associating with decomposition temperatures for 5% mass-loss in excess of 531 °C. These copolymers can be easily cast into tough, clear and creasable films and exhibit good mechanical properties. All copolymers are amorphous except PAEP9010 as evidenced by WAXD. Their solubility increases with an increase in meta-ether linkage content in the polymer backbone, while the crystallinity and the overall thermal stability appear to decrease slightly. This kind of phenyl-s-triazine-based poly(arylene ether) copolymers may be considered a good candidate for using as high-performance polymeric materials.     

Block Copolymerization of Vinyl Monomers with Macroiniferer

Abstract

Block copolymers composed of a polyether, such as poly(oxytetra-methylene), and vinyl polymers, such as polystyrene, poly(methyl methacrylate), poly(butyl acrylate), and poly(vinyl acetate), were prepared by photopolymerizations of vinyl monomers initiated with a polyether macroiniferter, α - (diethyldithiocarbamylacetyl) - ω - (diethyldithiocar-bamylacetoxy)-poly(oxytetramethylene). ESR spectroscopy and end-group analysis of diethyldithiocarbamyl indicated that block copolymers should be predominantly ABA-type copolymers. The block copolymers were characterized in detail by NMR, GPC, and DSC analysis.