Hydrothermal treatment of fused silica capillary columns

The activity of fused silica capillary tubing has been shown to vary considerably, which severely influences the reproducibility of column deactivation and inertness. Methods for producing a reproducible, high activity surface with maximum hydroxylation by various hydrothermal treatments were evaluated. Columns pretreated with 20% nitric acid at 200°C for 10 hours, deactivated with D₄, coated with OV-73, and crosslinked with azo-tert-butane were found to possess excellent inertness for sensitive analytes such as alcohols, amines, and alkaloid drugs.     

Hydrothermal preparation of hybrid carbon/silica monolithic capillary column for liquid chromatography

A simple, easy and economical approach for the preparation of a hybrid carbon/silica monolithic capillary column was described for the first time by using silica monolith as framework in combination with hydrothermal carbonization at 180°C. During the preparation process, formamide was introduced to the reaction solutions to reduce the dissolution rate of monolithic silica skeleton and its optimal concentration was 1.5 M. Fourier transform infrared spectrometry, scanning electron microscopy, energy dispersive X‐ray spectrometry, and inverse size exclusion chromatography were carried out to characterize the as‐prepared column. The results demonstrated that carbon spheres ranging from 150 to 1000 nm were successfully attached to the surface of silica skeleton. The prepared hybrid carbon/silica column had a permeability of 4.4 × 10^?14 m². Chromatographic performance of the column was evaluated by separation of various compounds including alkylbenzenes, nucleosides and bases, and aromatic acids. The column exhibited an efficiency of 75 000 plates/m for butylbenzene at the optimal linear velocity of 0.23 mm/s. The successful separation of these compounds and the study on mechanism indicated that the column can be applied in mixed‐mode chromatography.     

Endcapping of high performance liquid chromatography packings derived from silica gel

The effect of endcapping a reversed phase chromatographic packing material derived from silica gel depends on the degree of derivatization of the phase. The effect can be dramatic for phases with low loading. Whether an octadecylated silica gel has been endcapped or not can be ascertained by chromatographing the pair naphthalene/1-nitronaphthalene with a water/methanol eluent producing at least k' ≈ 10 for naphthalene. The ratio of the two k' values is 1.4 or higher for an endcapped material, while it is only 1.1 -1.2 for a non-endcapped phase. A similar approach fails to give conclusions of similar utility for octylated silica gels.     

The hydroxyl content of silica gel

Thermogravimetric analysis of silica gel has shown that the loss in weight between 30° and 910°C can be quantitatively explained on the basis of water being lost from three distinct and different populations of sites on the silica gel surface. The results indicate that the site energies of the three different populations are randomly distributed and, consequently, the resulting weight loss steps from each population can be described by the integral of a simple normal distribution with temperature. The calculated weight loss obtained by assuming three different site-groups having randomly distributed adsorption energies is, within experimental error, coincident with the experimental data. It is also shown that the water evolved from the second population of sites originates from strongly bound water and may also contain water generated by the condensation of (geminal) silanol groups contained in the overlapping and neighbouring population.     

硅胶的表面硅烷化处理及其吸附性能研究

为研究改性硅胶对挥发性有机废气的吸附性能,分别采用十六烷基三甲氧基硅烷、辛基三乙氧基硅烷、苯基三甲氧基硅烷、一甲基三乙氧基硅烷对硅胶进行气相改性处理,试验研究了不同改性剂、改性时间对硅胶饱和吸附率的影响,考察了改性硅胶对甲苯、水二组分体系的吸附选择性.结果表明,硅胶对甲苯的吸附主要为物理吸附,长链的硅烷改性剂在60℃、...     

Liquid chromatography of macromolecules at the critical adsorption point. II. Role of column packing: Bare silica gel

Liquid chromatography of macromolecules at the critical adsorption point (LC CAP) presents a potentially very powerful method for molecular characterization of complex polymers. However, LC CAP applicability is limited due to various experimental problems. The pore sizes and surface chemistry of the column packings belong to the most important weak points of the method. The LC CAP behavior of poly(methyl methacrylate)s was investigated using bare silica gels of 6, 12, and 100 nm pore sizes and with various amounts of surface silanols. Tetrahydrofuran as the adsorption suppressing liquid and toluene as the adsorption promoting liquid were mixed to form the “nearly critical” eluents. Both pore size and surface chemistry of silica were found to strongly influence the retentive characteristics of the system in the critical adsorption area. Macromolecules that were large enough to be excluded from the packing pores hardly followed the LC CAP rules: their retention volumes changed irregularly with the polymer molar mass and their recovery dropped sharply. The narrow pore silica gel-packed column governed the elution patterns of the whole column set composed of silica gels with different pore sizes. This makes the conventional LC CAP characterization of common polymers with broader molar mass distribution impractical and even not feasible. A hybrid column system was proposed containing narrow pore nonadsorptive column added in series to the meso- and macroporous LC CAP silica gels. This narrow pore column would allow separation of gas, impurities, and system peaks from the polymer peaks. The possible successive changes of the surface of silica gel, e.g., due to formation of silanols by hydrolysis or due to irreversible adsorption of some admixtures from the sample or eluent may make the LC CAP irrepeatable. Pronounced peak broadening was observed in the critical adsorption area and this effect increased strongly with the polymer molar mass. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1363–1371, 1998     

Pentacyanoferrates(II) on the surface of organomodified silica gel: The matrix effect

Pentacyanoferrate(II) absorbed on a silica gel surface previously modified with 3-aminopropyl and 3-imidazolylpropyl groups were characterized by¹³C MAS/NMR, FT-IR, Mössbauer spectroscopy, and cyclic voltammetry. FT-IR and¹³C MAS/NMR data indicated that the pentacyanoferrate(II) complex is bonded to the surface by the nitrogen atom of the functional group. The differences in the isomeric shifts, the quandrupole splittings and the midpoint potentials of the adsorbed complexes in comparison with the model complexes were attributed to the matrix polar effect—i.e., the interaction of the complex with polar groups on the silica surface.     

Selectivity of liquid-adsorption chromatography on hydroxylated silica gel with nonpolar and polar eluents

Summary The effect of nonpolar (hexane, decane, benzene) and polar (water, isopropanol, water+isopropanol) eluents on separation of aromatic hydrocarbons and their derivatives in liquid-adsorption chromatography on hydroxylated silica gel columns has been studied. The work has revealed that the traditional application areas of hydroxylated silica gel in liquid chromatography may be extended. In particular it has been shown that, first, polar compounds may be separated on hydroxylated silica gel with nonpolar eluents at high temperatures (100–150°C) and that polar and nonpolar compounds may be separated using pure water as eluent. The effect of adsorbed moisture on retention behaviour of silica gel with nonpolar eluents has also been investigated.Presented at the 14th International Symposium on Chromatography London, September, 1982     

Study of silica gel and copper silicate gel solubilities in high performance liquid chromatography

Summary After summarizing published results on silica gel and alkyl-bonded silica gel solubilities, the experimental solubility of unmodified silica and copper silicate gel (used in ligand exchange chromatography) in watermethanol-ammonia and water-acetonitrile-ammonia mixtures are given. These results demonstrate that silica gel solubility, measured by a static method, varies greatly with the water volume fraction of a ternary mixture. Curiously, no influence from the organic nature of the solvent was demonstrated. This observation is inconsistent with the fact that the copper silicate gel used in ligand-exchange chromatography with water-methanol-ammonia as mobile phase is attacked more rapidly than with water-acetonitrile-ammonia.An explanation based upon the variations of acid-base properties of silicic acid versus mobile phase dielectric constant values in conjunction with the methanol protophilic properties is proposed. Finally, it is shown that chromatographic columns filled with copper silicate gel have lifetimes of several months, if they are used with a procolumn (of copper silicate gel) and with acetonitrile as organic solvent with a volume fraction greater than 0.5 in the mobile phase.     

Solvent-free cyclopalladation on silica gel

Tertiary, secondary and primary benzylamines, as well as structurally different oxazolines readily reacted with Pd(OAc)₂ on silica gel to form cyclopalladated complexes containing a five or six-membered palladacycle with a (sp²)C-Pd or (sp³)C-Pd bond. The complexes were obtained in 45-98% yield, which is comparable with or exceeds the yields reported for preparation of the same compounds in solution. Aliphatic (sp³)C-H bond activation took place in the cyclopalladation of (S)-2-tert-butyl-4-phenyl-2-oxazoline on SiO₂ leading to the exclusive formation of the corresponding endo palladacycle, whereas two products were reported for the same reaction performed in AcOH.     

HPLC on pentalfuoroanilinopropyl silica gel

Summary The preparation of a new pentafluoroanilino-phase for HPLC is described. The retention times (t_r) of about twenty aromatic hydrocarbons have been determinated. It has been shown that the aromatics were eluted according to the number of rings. The influence of water content in the mobile phase is commented.     

凝胶法制备条件对载体硅胶孔结构的影响

以水玻璃、硫酸为原料采用凝胶法制备了烯烃环氧化催化剂载体硅胶,为探讨制备条件对硅胶孔结构的影响,采用物理吸附仪对不同条件下制备的硅胶进行了表征,结果表明:溶胶pH值、老化温度和老化时间、氨水pH值对硅胶孔结构影响显著,当溶胶pH值为1.5,在80℃下用pH 10.5的氨水浸泡老化凝胶2 h,所得硅胶的比表面积在300 m2.g-1左右,孔径和孔容分别在9.71 nm和0.92 cm3.g-1以上,以此硅胶为载体制得的非均相催化剂Ti/SiO2对于氯丙烯和环己基过氧化氢的环氧化反应具有明显的催化活性。     

The influence of an acid treatment on the surface charge density of silica gel

The influence of an acid treatment on the pore structure as well as on the surface charge density of porous silica was investigated. It is shown that this treatment causes only small changes of the pore structure. Positive values of the surface charge density at pH>4 are interpreted in terms of surface impurities consisting of Na⁺ ions resulting from the synthesis of the gel from sodium silicate solution. This effect is strongly influenced by the acid treatment. The surface charge density parameters were evaluated on the basis of the triple-layer model for the electrical double layer. Here two different mechanisms of counterion attachment in the inner Helmholtz plane are discussed.     

Novel one-pot synthesis of 4H-chromene derivatives using amino functionalized silica gel catalyst

A simple, efficient, and environmentally benign method for the synthesis of 4H-chromene derivatives was developed using well ordered and recoverable amino functionalized silica gel as a base catalyst. The 4H-chromene derivatives were obtained in short time and excellent yield(87%–96%) by three component reaction of aldehydes, malononitrile and cyclic 1,3-diketones in water at 70 8C.     

大黄素键合硅胶高效液相色谱柱的制备和应用

采用中间体法,先将大黄素配体与γ-[（2,3）-环氧丙氧]丙基三甲氧基硅烷（KH-560）偶联剂反应制备含配体的硅氧烷试剂,然后再与硅胶键合,最终制得大黄素键合硅胶液相色谱固定相（以下简称ESP）。通过红外光谱、元素分析和热重分析表征固定相的结构。以萘作为溶质探针,甲醇-水（60：40,v/v）为流动相,流速为0.8 mL/min,测得ESP柱的柱效。采用传统的反相C₁₈和苯基柱作参比,将ESP应用于系列中性、碱性和酸性芳香族化合物以及实际样品风油精的分离分析,并探讨相关的色谱分离机理。结果表明,配体大黄素被成功地键合到球形硅胶表面,测得配体键合量为0.23 mmol/g,ESP柱理论塔板数约为19874 N/m。ESP的偶联剂链和蒽醌环提供了疏水性的结构基础,大黄素配体还能为溶质提供π-π或p-π、电荷转移、氢键、偶极-偶极等作用点。多位点的协同作用使得ESP柱具有独特和优秀的色谱分离选择性,并且无需调节pH值,采用简单而廉价的甲醇-水流动相就能实现胺类、酚类等极性样品的基线分离,实验条件简单、方便。