Synthese des (R)-trans-11-Hydroxy-8-dodecensäure-lactons (Recieifeiolid)

Synthesis of Recifeiolide The synthesis of the mould metabolite recifeiolide (VIII), a 12-membered ring lactone, is described. 1,3-Butandiol was resolved with (?)-camphanic acid via (R)-1-iodo-3-butanol (II) into (R)-3-hydroxybutyl triphenyl phosphonium iodide (III). Wittig condensation of the phosphorane derived from III with methyl 8-oxo-octanoate (V) led to the methyl trans-11-hydroxy-8-dodecenoate (VI). The corresponding hydroxy acid VII was transformed into the S-(2-pyridyl) carbothioate which cyclizes under the influence of silver ion to the lactone VIII. With (?)-(R)-1,3-butandiol (I) as starting material the naturally occurring (+)-(R)-recifeiolide (VIII) is produced in 70% yield from VII.     

The very low-pressure pyrolysis of phenyl methyl sulfide and benzyl methyl sulfide. The enthalpy of formation of the methylthio and phenylthio radicals

The kinetics and mechanisms of the unimolecular decompositions of phenyl methyl sulfide (PhSCH₃) and benzyl methyl sulfide (PhCH₂SCH₃) have been studied at very low pressures (VLPP). Both reactions essentially proceed by simple carbon-sulfur bond fission into the stabilized phenylthio (PhS·) and benzyl (PhCH₂·) radicals, respectively. The bond dissociation energies BDE(PhS-CH₃) = 67.5 ± 2.0 kcal/mol and BDE(PhCH₂-SCH₃) = 59.4 ± 2 kcal/mol, and the enthalpies of formation of the phenylthio and methylthio radicals ΔH° _,298K(PhS·, g) = 56.8 ± 2.0 kcal/mol and ΔH°_{f, 298K}(CH₃S·, g) = 34.2 ± 2.0 kcal/mol have been derived from the kinetic data, and the results are compared with earlier work on the same systems. The present values reveal that the stabilization energy of the phenylthio radical (9.6 kcal/mol) is considerably smaller than that observed for the related benzyl (13.2 kcal/mol) and phenoxy (17.5 kcal/mol) radicals.     

Synthese von zwei natürlich vorkommenden Lactonen mit 10gliedrigen Ringen: (±)-Phoracantholid J und I

Synthesis of Two Naturally Occurring 10-Membered Ring Lactones: (±)-Phoracantholide J and I Two 10-membered ring lactones 7 and 11 from the metasternal secretion of the eucalypt longicorn Phoracantha synonyma have been synthesized by the following method. Reaction of the dilithium derivative of 4-pentynoic acid ( 3 ) with 4-tetrahydropyranyloxy-1-pentylbromide ( 2 ), followed by removal of the protecting group and by esterification with diazomethane, gave methyl 9-hydroxy-4-decynoate ( 4 ; s. Scheme 1). Partial hydrogenation of the triple bond in 4 with Lindlar palladium catalyst, followed by saponification lead to cis-9-hydroxy-4-decenoic acid ( 6 ). The 9-hydroxydecanoic acid ( 9 ) was synthesized by addition of methyl magnesium iodide to methyl 8-formyloctanoate ( 8 ) followed by saponification (s. Scheme 2). The hydroxy acids 6 and 9 were converted into the S-(2-pyridyl) thioesters and cyclized in dilute benzene solution under the influence of silver ions to yield (±)-phoracantholide J ( 7 ) and I ( 11 ) in 74 and 71% yield, respectively.     

Eine neue Synthese von (±)-Pyrenophorin

A new Synthesis of (±)-Pyrenophorin The synthesis of pyrenophorin (I), a 16-membered dilactone metabolite of plant pathogenic fungi is described. Reaction of the Grignard reagent II with the activated succinic acid ester III gave the methyl (t-butyl)dimethylsilyloxy-oxo-octanoate IV which was converted into the corresponding ethylene acetal. Dehydrogenation via the benzeneselenenyl derivative lead to pyrenophorinic acid V with protected functional groups. Selective removal of silyl group followed by saponification of the ester group provided the ethylene acetal-hydroxy acid VI suitable for the cyclodimerisation reaction. This was effected with azodicarbonic acid ester and triphenylphosphine at ?40° in a dilute toluene solution. The 16-membered dilactones VII with protected carbonyl groups were isolated in 24% yield. Silver-ion induced cyclodimerisation of the S-2-pyridyl carbothioate of VI gave much lower yields. Removal of the acetal groups lead to (±)-pyrenophorin (I) and meso-pyrenophorin in about equal amounts.     

A Short and Elegant Synthesis of (±)‐Streptopyrrolidine

A brief and efficient approach for the synthesis of (±)‐5‐benzyl‐4‐hydroxy‐2‐pyrrolidine ( 1 ) from phenylalanine racemate is described. The key step is the stereocontrolled reduction of the keto functionality of benzylated pyrrolidinone intermediate ( 6 ) via sodium borohydride in carboxylic acid medium furnishing both (R,R)‐ and (S,S)‐configured diastereomers. The natural (R,R) enantiomer ( 2 ), however, crystallized out from its racemic mixture. Structure of 2 was confirmed by NMR, IR, elemental analyzer, and single crystal X‐ray crystallographic techniques.     

Synthesis of optically active copoly(vinylamine–vinylalcohol) containing a pair of adeninyl and thyminyl pendant groups

Preparation of novel model polymers of polynucleotides with copoly(vinylamine–vinylalcohol) [P(Vam–Val)] backbone and a pair of adeninyl and thyminyl pendant groups is described. At first, direct, low temperature esterification was used to attach (?) and (±)-2-(thymin-1-yl)propionic acid [(?)TPA and (±)TPA], to the N–Cbz protected hydroxy polymer P(Vamz–Val) which was prepared by selective N-protection of N-benzyloxycarbonyloxy-5-norbornene-2,3-dicarboximide (CbzONB) with P(Vam–Val), at the hydroxy group via an ester bond. Two novel precursors P(Vamz–Ve(?)T) and P(Vamz–Ve(±)T) were obtained. Then the Cbz protecting group of P(Vamz–Ve(?)T) and P(Vamz–Ve(±)T) were removed by hydrobromic acid to give the hydrobromide salt of P(Vam–Ve(?)T) and P(Vam–Ve(±)T), respectively. Finally, the attachment of (±)-2-(adenine-9-yl)propionic acid [(±)APA] to linear P(Vam–Ve(?)T) and P(Vam–Ve(±)T) by selective N-acylation with N-hydroxy-5-norbornene-2,3-dicarboximide (HONB). This procedure gave the corresponding P(Vam–Val) having a pair of adeninyl and thyminyl pendant groups, such as P(Va(±)Ad–Ve(?)T) and P(Va(±)Ad–Ve(±)T). In contrast to the corresponding polymer models, the related segment model compounds were also prepared from threo-2-amino-4-pentanol without N-blocking-deblocking operations. The segment model compounds including four stereoisomers of highly optical purities, were separated and purified by reverse phase HPLC technique.     

Use of MEKC for the analysis of reactant and product of Baylis–Hillman reaction

A facile, fast and high efficiency micellar EKC has been explored for the analysis and UV detection of p‐nitrobenzaldehyde and 2‐[hydroxy(4‐nitrophenyl)methyl]‐2‐cyclopenten‐1‐one with a buffer electrolyte of 30.0 mM tetraborate and 50.0 mM sodium taurodeoxycholate at pH 9.3. Under the optimal conditions, a linear range from 7.8×10^–2 to 5.0×10² mM for those analytes (r² > 0.99) was achieved. The LOD was 3.9 μM for 2‐[hydroxy(4‐nitrophenyl)methyl]‐2‐cyclopenten‐1‐one and 7.8 μM for p‐nitrobenzaldehyde, respectively (S/N = 3). The applicability of this new method for the analysis of reactants (p‐nitrobenzaldehyde and cyclopent‐2‐enone), catalysts (imidazole or N‐methyl imidazole or 1‐benzyl‐imidazole) and product (2‐[hydroxy(4‐nitrophenyl)methyl]‐2‐cyclopenten‐1‐one) on offline Baylis–Hillman reaction was examined. The relationship between the reaction time and the amount of product has been studied. Meanwhile, three different kinds of catalysts were investigated for getting the desired moderate to good amount products. It was found that comparing with N‐methyl imidazole or 1‐benzyl‐imidazole catalyst, imidazole‐catalyzed reaction could produce more products within the same reaction time. Furthermore, the results indicated that the rate law for the investigated Baylis–Hillman reaction was second‐order reaction. The rate constant for the reaction is 1.34 (±0.01)×10^–3 mol^–1 m³/s.     

Metabolism of Deuterated erythro‐Dihydroxy Fatty Acids in Saccharomyces cerevisiae: Enantioselective Formation and Characterization of Hydroxylactones

Epoxides of fatty acids are hydrolyzed by epoxide hydrolases (EHs) into dihydroxy fatty acids which are of particular interest in the mammalian leukotriene pathway. In the present report, the analysis of the configuration of dihydroxy fatty acids via their respective hydroxylactones is described. In addition, the biotransformation of (±)‐erythro‐7,8‐ and ‐3,4‐dihydroxy fatty acids in the yeast Saccharomyces cerevisiae was characterized by GC/EI‐MS analysis. Biotransformation of chemically synthesized (±)‐erythro‐7,8‐dihydroxy(7,8‐²H₂)tetradecanoic acid ((±)‐erythro‐ 1 ) in the yeast S. cerevisiae resulted in the formation of 5,6‐dihydroxy(5,6‐²H₂)dodecanoic acid ( 6 ), which was lactonized into (5S,6R)‐6‐hydroxy(5,6‐²H₂)dodecano‐5‐lactone ((5S,6R)‐ 4 ) with 86% ee and into erythro‐5‐hydroxy(5,6‐²H₂)dodecano‐6‐lactone (erythro‐ 8 ). Additionally, the α‐ketols 7‐hydroxy‐8‐oxo(7‐²H₁)tetradecanoic acid ( 9a ) and 8‐hydroxy‐7‐oxo(8‐²H₁)tetradecanoic acid ( 9b ) were detected as intermediates. Further metabolism of 6 led to 3,4‐dihydroxy(3,4‐²H₂)decanoic acid ( 2 ) which was lactonized into 3‐hydroxy(3,4‐²H₂)decano‐4‐lactone ( 5 ) with (3R,4S)‐ 5 =88% ee. Chemical synthesis and incubation of (±)‐erythro‐3,4‐dihydroxy(3,4‐²H₂)decanoic acid ((±)‐erythro‐ 2 ) in yeast led to (3S,4R)‐ 5 with 10% ee. No decano‐4‐lactone was formed from the precursors 1 or 2 by yeast. The enantiomers (3S,4R)‐ and (3R,4S)‐3,4‐dihydroxy(3‐²H₁)nonanoic acid ((3S,4R)‐ and (3R,4S)‐ 3 ) were chemically synthesized and comparably degraded by yeast without formation of nonano‐4‐lactone. The major products of the transformation of (3S,4R)‐ and (3R,4S)‐ 3 were (3S,4R)‐ and (3R,4S)‐3‐hydroxy(3‐²H₁)nonano‐4‐lactones ((3S,4R)‐ and (3R,4S)‐ 7 ), respectively. The enantiomers of the hydroxylactones 4, 5 , and 7 were chemically synthesized and their GC‐elution sequence on Lipodex^® E chiral phase was determined.     

2‐{[Tris(hydroxymethyl)methyl]aminomethylene}cyclohexa‐3,5‐dien‐1(2H)‐one and its 6‐hydroxy and 6‐methoxy derivatives

The title compounds, 2‐{[tris­(hydroxy­methyl)­methyl]­amino­methyl­ene}cyclo­hexa‐3,5‐dien‐1(2H)‐one, C₁₁H₁₅NO₄, (I), 6‐hydroxy‐2‐{[tris­(hydroxy­methyl)­methyl]­amino­methyl­ene}­cyclo­hexa‐3,5‐dien‐1(2H)‐one, C₁₁H₁₅NO₅, (II), and 6‐methoxy‐2‐{[tris­(hydroxy­methyl)­methyl]­amino­methyl­ene}­cyclo­hexa‐3,5‐dien‐1(2H)‐one, C₁₂H₁₇NO₅, (III), adopt the keto–amine tautomeric form, with the formal hydroxy H atom located on the N atom, and the NH group and oxo O atom display a strong intramolecular N—H⋯O hydrogen bond. The N—H⋯O hydrogen‐bonded rings are almost planar and coupled with the cyclo­hexa­diene rings. The carbonyl O atoms accept two other H atoms from the alcohol groups of adjacent mol­ecules in (I), and one from the alcohol and one from the phenol group in (II), but from only one alcohol H atom in (III).     

Extensive hydrogen and halogen bonding,and absence of intramolecular hydrogen bonding between alcohol and nitro groups in a series of endo‐nitronorbornanol compounds

The influence of the substituent at the C2 position on the hydrogen‐bonding patterns is compared for a series of five related compounds, namely (±)‐3‐exo,6‐exo‐dibromo‐5‐endo‐hydroxy‐3‐endo‐nitrobicyclo[2.2.1]heptane‐2‐exo‐carbonitrile, C₈H₈Br₂N₂O₃, (II), (±)‐3‐exo,6‐exo‐dibromo‐6‐endo‐nitro‐5‐exo‐phenylbicyclo[2.2.1]heptan‐2‐endo‐ol, C₁₃H₁₃Br₂NO₃, (III), (±)‐methyl 3‐exo,6‐exo‐dibromo‐5‐endo‐hydroxy‐3‐endo‐nitrobicyclo[2.2.1]heptane‐2‐exo‐carboxylate, C₉H₁₁Br₂NO₅, (IV), (±)‐methyl 3‐exo,6‐exo‐dibromo‐7‐diphenylmethylidene‐5‐endo‐hydroxy‐3‐endo‐nitrobicyclo[2.2.1]heptane‐2‐exo‐carboxylate, C₂₂H₁₉Br₂NO₅, (V), and (±)‐methyl 3‐exo,6‐exo‐dibromo‐5‐endo‐hydroxy‐3‐endo‐nitro‐7‐oxabicyclo[2.2.1]heptane‐2‐exo‐carboxylate, C₈H₉Br₂NO₆, (VI). The hydrogen‐bonding motif in all five compounds is a chain, formed by O—H...O hydrogen bonds in (III), (IV), (V) and (VI), and by O—H...N hydrogen bonds in (II). All compounds except (III) contain a number of Br...Br and Br...O halogen bonds that connect the chains to each other to form two‐dimensional sheets or three‐dimensional networks. None of the compounds features intramolecular hydrogen bonding between the alcohol and nitro functional groups, as was found in the related compound (±)‐methyl 3‐exo,6‐exo‐dichloro‐5‐endo‐hydroxy‐3‐endo‐nitrobicyclo[2.2.1]heptane‐2‐exo‐carboxylate, (I) [Boeyens, Denner & Michael (1984b). J. Chem. Soc. Perkin Trans. 2, pp. 767–770]. The crystal structure of (V) exhibits whole‐molecule disorder.     

Stereo‐Inversion in the (4R)‐γ‐Decanolactone Synthesis by Saccharomyces cerevisiae: (2E,4S)‐4‐Hydroxydec‐2‐enoic Acid Acts as a Key Intermediate

Methyl (2E,4R)‐4‐hydroxydec‐2‐enoate, methyl (2E,4S)‐4‐hydroxydec‐2‐enoate, and ethyl (±)‐(2E)‐4‐hydroxy[4‐²H]dec‐2‐enoate were chemically synthesized and incubated in the yeast Saccharomyces cerevisiae. Initial C‐chain elongation of these substrates to C₁₂ and, to a lesser extent, C₁₄ fatty acids was observed, followed by γ‐decanolactone formation. Metabolic conversion of methyl (2E,4R)‐4‐hydroxydec‐2‐enoate and methyl (2E,4S)‐4‐hydroxydec‐2‐enoate both led to (4R)‐γ‐decanolactone with >99% ee and 80% ee, respectively. Biotransformation of ethyl (±)‐(2E)‐4‐hydroxy(4‐²H)dec‐2‐enoate yielded (4R)‐γ‐[²H]decanolactone with 61% of the ²H label maintained and in 90% ee indicating a stereoinversion pathway. Electron‐impact mass spectrometry analysis (Fig. 4) of 4‐hydroxydecanoic acid indicated a partial C(4)→C(2) ²H shift. The formation of erythro‐3,4‐dihydroxydecanoic acid and erythro‐3‐hydroxy‐γ‐decanolactone from methyl (2E,4S)‐4‐hydroxydec‐2‐enoate supports a net inversion to (4R)‐γ‐decanolactone via 4‐oxodecanoic acid. As postulated in a previous work, (2E,4S)‐4‐hydroxydec‐2‐enoic acid was shown to be a key intermediate during (4R)‐γ‐decanolactone formation via degradation of (3S,4S)‐dihydroxy fatty acids and precursors by Saccharomyces cerevisiae.     

A New Approach to Sesquiterpene Arenes of the 9,11‐Drimenyl Type (= [(1E,2RS,4aRS,8aRS)‐Octahydro‐2,5,5,8a‐tetramethylnaphthalen‐1(2H)‐ylidene] methyl Type)

A new reaction sequence for the synthesis of the sesquiterpene arenes (±)‐wiedendiol B ((±)‐ 1 ) and the siphonodictyal B derivative (±)‐ 21 consists in the coupling of (±)‐drimanoyl chloride ((±)‐ 3 ) with lithiated and appropriately substituted aromatic synthons to furnish the ketones (±)‐ 7 and (±)‐ 17 which were reduced to the benzyl alcohols (±)‐ 8a,b and (±)‐ 18a,b , respectively (Schemes 5, 4, and 12). The 9,11‐double bond of the drimenes (±)‐ 9 and (±)‐ 19 was formed by elimination of H₂O from the benzyl alcohols (±)‐ 8a,b and (±)‐ 18a,b (Schemes 6 and 12). New alternatives were applied to this elimination reaction involving either the pyridine ? SO₃ complex or chloral as reagents.     

Relative configuration,absolute configuration and absolute structure of three isomeric 8‐benzyl‐2‐[(4‐bromophenyl)(hydroxy)methyl]‐8‐azabicyclo[3.2.1]octan‐3‐ones

The title compounds, C₂₁H₂₂BrNO₂, are isomeric 8‐benzyl‐2‐[(4‐bromophenyl)(hydroxy)methyl]‐8‐azabicyclo[3.2.1]octan‐3‐ones. Compound (I), the (±)‐exo,syn‐(1RS,2SR,5SR,9SR) isomer, crystallizes in the hexagonal space group R, while compounds (II) [the (+)‐exo,anti‐(1R,2S,5S,9R) isomer] and (III) [the (±)‐exo,anti‐(1RS,2SR,5SR,9RS) isomer] crystallize in the orthorhombic space groups P2₁2₁2₁ and Pna2₁, respectively. The absolute configuration was determined for enantiomerically pure (II). For the noncentrosymmetric crystal of (III), its absolute structure was established. In the crystal structures of (I) and (II), an intramolecular hydrogen bond is formed between the hydroxy group and the heterocyclic N atom. In the crystal structure of racemic (III), hydrogen‐bonded chains of molecules are formed via intermolecular O—H...O interactions. Additionally, face‐to‐edge π–π interactions are present in the crystal structures of (I) and (II). In all three structures, the piperidinone rings adopt chair conformations and the N‐benzyl substituents occupy the equatorial positions.     

2, 3-Alkadiensäureester als Dienophile; Anwendung bei der Synthese von (+)-(R)-Lasiodiplodin

2,3-Alkadienoates as Dienophiles, Application in the Synthesis of (+)-(R)-Lasiodiplodin Methyl 2, 3-alkadienoates 2 are shown to react at 80° with l, 1-dimethoxy-3trimethylsilyloxy-l, 3-butadiene (1) to give the adducts 3 in good yields. Rearrangement of 3 , catalyzed by p-toluenesulfonic acid or by sodium methoxide, affords the 6-substituted methyl 4-hydroxy-2-methoxybenzoates 4 (R ? H, CH₃, C₆H₅). An analogous reaction sequence starting with (-)-(11 R)-dodeca-2, 3-dien-11-olide ((-) -6 ) and 1 leads, via the adduct (R)-7 , to (+)-( R )-lasiodiplodin ((+) ?8 ) with properties identical to those of the natural product. The allene lactone (-) -6 was prepared by an intramolecular Wittig condensation of (R) ?5 , produced from (–)-(R)-9-hydroxydecanoic acid.     

Synthesis of polyamide containing optically active thymine derivative as a grafted pendant

A new route to polyamides containing optically active thymine groups as pendants has been established. The method is based on the grafting of (–) and (±)-2-(thymin-1-yl)propionic acid [(–) and (±) TPA] onto a polyamide containing hydroxyl groups. The hydroxy polyamide was prepared by selective N-acylation of an active diester of N-hydroxy-5-norborene-2,3-dicarboxamide (HONB), N,N'-(isophthaloyl-dioxy)-bis(5-norbornene-2,3-dicarboximide) (IPBONB), with 1,3-diamino-2-hydroxypropane (AHP). Model compounds (?) and (±)-(1,3-dibenzoylamino-2-propyl)2-(thymin-1-yl)propionate[(?) and (±) (BAPTP)] were prepared by direct, low-temperature esterification before synthesizing the polymer.     

Isolierung,Konstitution und Synthese der (R)-(−)-Eucominsäure

From the bulbs of Eucomis punctata L'Hérit. (Liliaceae) and of a hitherto undefined species of Eucomis a new optically active phenolic carboxylic acid, eucomic acid, was isolated. Structure 1 was assigned on the basis of chemical and spectral evidence. The absolute configuration of eucomic acid was determined by its correlation with piscidic acid ((2 R, 3 S)-2-(4′-hydroxybenzyl)-tartaric acid) ( 8 ). Consequently, eucomic acid is (R)-(?)-2-(4′-hydroxybenzyl)-malic acid ( 1 ). For the stereospecific synthesis, methyl cis-p-methoxybenzylidene-succinic acid ( 22 ) was transformed into the γ-lactone 24 which, by catalytic hydrogenolysis, yielded (±)-2-(4′-hydroxybenzyl)-malic acid 1-methyl ester ( 27 ). Resolution with (?)-quinine led to the enantiomeric acids 29 and 30 . The methyl ester of the levorotatory enantiomer 30 was identical with the dimethyl ester 3 of 4′-O-methyl-eucomic acid.     

PPA-SiO2 Catalyzed Multi-component Synthesis of N-[α-(β-Hydroxy-α-naphthyl)(benzyl)] O-Alkyl Carbamate Derivatives

Silica-supported polyphosphoric acid (PPA-SiO2) was found to be an efficient catalyst for the multi-component condensation reaction of benzaldehydes, 2-naphthol, and methyl/benzyl carbamate to afford the corresponding N-[α-(β-hydroxy-α-naphthyl)(benzyl)] O-alkyl carbamate derivatives in good to excellent yields. This new approach consistently has the advantage of short reaction time, high conversions, clean reaction profiles, and simple experimental and work-up procedures.     

A concise and versatile route to tetrahydro‐1‐benzazepines carrying [a]‐fused heterocyclic units: synthetic sequence and spectroscopic characterization,and the molecular and supramolecular structures of one intermediate and two products

A concise, efficient and versatile route from simple starting materials to tricyclic tetrahydro‐1‐benzazepines carrying [a]‐fused heterocyclic units is reported. Thus, the easily accessible methyl 2‐[(2‐allyl‐4‐chlorophenyl)amino]acetate, (I), was converted, via (2RS,4SR)‐7‐chloro‐2,3,4,5‐tetrahydro‐1,4‐epoxy‐1‐benzo[b]azepine‐2‐carboxylate, (II), to the key intermediate methyl (2RS,4SR)‐7‐chloro‐4‐hydroxy‐2,3,4,5‐tetrahydro‐1H‐benzo[b]azepine‐2‐carboxylate, (III). Chloroacetylation of (III) provided the two regioisomers methyl (2RS,4SR)‐7‐chloro‐1‐(2‐chloroacetyl)‐4‐hydroxy‐2,3,4,5‐tetrahydro‐1H‐benzo[b]azepine‐2‐carboxylate, (IVa), and methyl (2RS,4SR)‐7‐chloro‐4‐(2‐chloroacetoxy)‐2,3,4,5‐tetrahydro‐1H‐benzo[b]azepine‐2‐carboxylate, C₁₄H₁₅Cl₂NO₄, (IVb), as the major and minor products, respectively, and further reaction of (IVa) with aminoethanol gave the tricyclic target compound (4aRS,6SR)‐9‐chloro‐6‐hydroxy‐3‐(2‐hydroxyethyl)‐2,3,4a,5,6,7‐hexahydrobenzo[f]pyrazino[1,2‐a]azepine‐1,4‐dione, C₁₅H₁₇ClN₂O₄, (V). Reaction of ester (III) with hydrazine hydrate gave the corresponding carbohydrazide (VI), which, with trimethoxymethane, gave a second tricyclic target product, (4aRS,6SR)‐9‐chloro‐6‐hydroxy‐4a,5,6,7‐tetrahydrobenzo[f][1,2,4]triazino[4,5‐a]azepin‐4(3H)‐one, C₁₂H₁₂ClN₃O₂, (VII). Full spectroscopic characterization (IR, ¹H and ¹³C NMR, and mass spectrometry) is reported for each of compounds (I)–(III), (IVa), (IVb) and (V)–(VII), along with the molecular and supramolecular structures of (IVb), (V) and (VII). In each of (IVb), (V) and (VII), the azepine ring adopts a chair conformation and the six‐membered heterocyclic rings in (V) and (VII) adopt approximate boat forms. The molecules in (IVb), (V) and (VII) are linked, in each case, into complex hydrogen‐bonded sheets, but these sheets all contain a different range of hydrogen‐bond types: N—H…O, C—H…O, C—H…N and C—H…π(arene) in (IVb), multiple C—H…O hydrogen bonds in (V), and N—H…N, O—H…O, C—H…N, C—H…O and C—H…π(arene) in (VII).     

Channel‐forming solvate crystals and isostructural solvent‐free powder of 5‐hydroxy‐6‐methyl‐2‐pyridone

Crystals of 5‐hydroxy‐6‐methyl‐2‐pyridone, (I), grown from a variety of solvents, are invariably trigonal (space group R); these are 5‐hydroxy‐6‐methyl‐2‐pyridone acetone 0.1667‐solvate, C₆H₇NO₂·0.1667C₃H₆O, (Ia), and 6‐methyl‐5‐hydroxy‐2‐pyridone propan‐2‐ol 0.1667‐solvate, C₆H₇NO₂·0.1667C₃H₈O, (Ib), and the forms from methanol, (Ic), water, (Id), benzonitrile, (Ie), and benzyl alcohol, (If). They incorporate channels running the length of the c axis that contain extensively disordered solvent molecules. A solvent‐free sublimed powder of 5‐hydroxy‐6‐methyl‐2‐pyridone microcrystals is essentially isostructural. Inversion‐related host molecules interact via pairs of N—H...O hydrogen bonds to form R₂²(8) dimers. Six of these dimers form large R₁₂⁶(42) puckered rings, in which the O atom of each N—H...O hydrogen bond is also the acceptor in an O—H...O hydrogen bond that involves the 5‐hydroxy group. The large R₁₂⁶(42) rings straddle the axes and form stacked columns viaπ–π interactions between inversion‐related molecules of (I) [mean interplanar spacing = 3.254 Å and ring centroid–centroid distance = 3.688 (2) Å]. The channels are lined by methyl groups, which all point inwards to the centre of the channels.     

2-(Trimethylsilyl)äthylester als Carboxylschutzgruppe; Anwendung bei der Synthese des (−)-(S)-Curvularins

2-(Trimethylsilyl)ethyl Esters as Carboxyl Protecting Group; Application in the Synthesis of (?)-(S)-Curvularin The mould metabolite curvularin (VIII) has been synthesized with the help of a new carboxyl protecting group that can be removed selectively with fluoride ions. 2-(Trimethylsilyl)ethyl 7-hydroxy-octanoate (III) was acylated with 3,5-dibenzyloxy-phenacetyl chloride (IV) to form V with two different ester groups. Tetrabutyl-ammonium fluoride in tetrahydrofuran cleaved the 2-(trimethylsilyl)ethyl ester in V selectively to form the carboxylate anion of VI together with ethylene and trimethylsilyl fluoride. Curvularin dibenzyl ether (VII) was formed by intramolecular acylation of VI. Removal of the benzyl ether groups in VII by hydrogenolysis led to (±)-curvularin (VIII). The naturally occurring (?)-enantiomer was formed when (+)-(S)-III served as starting material.