Sulfonated poly(aryl ether ether ketone ketone)s containing fluorinated moieties as proton exchange membrane materials

A series of sulfonated poly(aryl ether ether ketone ketone)s statistical copolymers with high molecular weights were synthesized via an aromatic nucleophilic substitution polymerization. The sulfonation content (SC), defined as the number of sulfonic acid groups contained in an average repeat unit, could be controlled by the feed ratios of monomers. Flexible and strong membranes in sodium sulfonate form could be prepared by the solution casting method, and readily transformed to their proton forms by treating them in 2 N sulfuric acid. The polymers showed high T_gs, which increased with an increase in SC. Membranes prepared from the present sulfonated poly(ether ether ketone ketone) copolymers containing the hexafluoroisopropylidene moiety (SPEEKK‐6F) and copolymers containing the pendant 3,5‐ditrifluoromethylphenyl moiety (SPEEKK‐6FP) had lower water uptakes and lower swelling ratios in comparison with previously prepared copolymers containing 6F units. All of the polymers possessed proton conductivities higher than 1 × 10^?2 S/cm at room temperature, and proton conductivity values of several polymers were comparable to that of Nafion at high relative humidity. Their thermal stability, oxidative stability, and mechanical properties were also evaluated. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2299–2310, 2006     

Characterization and performance of proton exchange membranes for direct methanol fuel cell: Blending of sulfonated poly(ether ether ketone) with charged surface modifying macromolecule

Modification of sulfonated poly(ether ether ketone) (SPEEK) membrane was attempted by blending charged surface modifying macromolecule (cSMM). The modified membrane was tested for direct methanol fuel cell (DMFC) application; i.e. a SPEEK/cSMM blend membrane was compared to a SPEEK membrane and a Nafion 112 membrane for the thermal and mechanical stability, methanol permeability, and proton conductivity. Thermal and mechanical stability of the blended membrane were slightly reduced from the SPEEK membrane but still higher than the Nafion 112 membrane. The blend membrane was found to be promising for DMFC applications because of its lower methanol diffusivity (2.75 × 10⁻⁷ cm² s⁻¹) and higher proton conductivity (6.4 × 10⁻³ S cm⁻¹), than the SPEEK membrane. A plausible explanation was given for the favorable effect of cSMM blending.     

Proton conductive membranes of sulfonated poly(ether ketone ketone)

Poly(ether ketone ketone) was sulfonated using fumic sulfuric acid and used for preparation of proton conductive membranes. The sulfonation degree was evaluated by elemental and thermal analysis and the IEC values were determined by titration. The proton conductivity of membranes with sulfonation degrees up to 70% was determined as a function of temperature by impedance spectroscopy. Membranes with sulfonation degree 38–70% were tested in DMFC experiments. Their performance was comparable to Nafion^® with the same pretreatment and clearly better than sulfonated poly(ether ether ketone) membranes with similar functionalization. The methanol crossover was lower than that of Nafion^® in the same conditions.     

Sulfonated Poly(ether ether ketone) and Poly(ethylene glycol) Diacrylate Based Semi-Interpenetrating Network Membranes for Fuel Cells

Polymer electrolyte membranes are prepared from novel semi-interpenetrating polymer network material where the sulfonated poly (ether ether ketone) (SPEEK) is the linear polymer and the poly (ethylene glycol) diacrylate (PEGDA) is the cross-linking constituent. The semi-IPN is prepared by in situ polymerization of PEGDA in the presence of sulfonated poly (ether ether ketone). SPEEK is prepared by direct sulfonation of commercial PEEK (Gatone? 1100) by reported procedures. SPEEK with degree of sulfonation 63% (calculated from FT-NMR) is selected as the base membrane and different semi-IPN membranes were prepared by varying the PEGDA and SPEEK ratio. The degree of sulfonation of SPEEK and the formation of semi-IPN were confirmed by spectroscopy studies. The various semi-IPN membranes were characterized for ion-exchange capacity, water uptake, hydrolytic stability, proton conductivity and thermal stability for evaluating the suitability of these membranes for fuel cells. The proton conductivity of the membranes decreased with increasing PEGDA content. The Semi-IPN membranes exhibited conductivities (30°C) from 0.018 S/cm to 0.006 S/cm. These interpenetrating network membranes showed higher hydrolytic stability than the pure SPEEK membrane. This study shows that semi-IPN membranes based on PEGDA and SPEEK can be viable candidates for electrolyte membranes.     

自交联型磺化聚醚醚酮质子交换膜的合成

以含3,3'-二烯丙基双酚 A 结构单元的聚醚醚酮为基膜材料, 通过自由基加成反应在取代基上引入磺酸基团, 合成侧链型磺化聚醚醚酮(SPEEK)质子交换膜. 用傅里叶变换红外(FTIR)光谱、 核磁共振氢谱(¹H NMR)、 热重分析(TG)和扫描电子显微镜(SEM)等方法对 SPEEK 的结构进行表征. 实验结果表明, 巯基丙磺酸被接枝在聚醚醚酮侧基上, SPEEK 膜具有明显的亲水疏水微相分离形貌, 磺酸基团相互聚集形成离子通道. SPEEK 膜离子交换容量为 2.12 mmol/g, 钒离子渗透率为 1.54×10^-6 cm²/min, 低于Nafion117 膜的钒离子渗透率, 阻钒能力优于 Nafion117 膜. 以 SPEEK-4 膜组装电池的自放电时间约为130 h, 长于 Nafion117 膜的 66 h. 电池充放电循环 50 次, SPEEK-4 膜的库仑效率、 电压效率和能量效率没有明显降低, 显示出良好的稳定性.     

侧链型磺化聚芳醚酮质子交换膜材料的制备

本文通过对聚合物的结构设计, 采用均聚的途径将柔顺的大侧基(甲氧基苯基)引入聚芳醚酮侧链, 然后通过室温后磺化的方法成功制备出侧链型磺化聚芳醚酮材料. 此类材料表现出较好的热稳定性; 力学性能优异; 聚合物的质子传导率比报道过的类似材料有较大程度的提高; 于80 ℃时的质子传导率在0.190 S/cm以上, 超过了Nafion 117 薄膜的传导率(0.175 S/cm). 因此这类材料有望在质子交换膜领域得到应用.     

Morphology control of sulfonated poly(ether ketone ketone) poly(ether imide) blends and their use in proton-exchange membranes

Polymer blends based on sulfonated poly(ether ketone ketone) (SPEKK) as the proton-conducting component and poly(ether imide) (PEI) as the second component were considered for proton-exchange membranes (PEMs). The PEI was added to improve the mechanical stability and lower the water swelling in the fuel cell environment. Membranes were cast from solution using N-methyl-2-pyrrolidone (NMP) and dimethylacetamide (DMAc). The ternary, polymer/polymer/solvent, phase diagram was determined to provide guidance on how to control the morphology during solvent casting of blend membranes.

For blends of SPEKK (ion-exchange capacity = 2 mequiv/g) with PEI as the minority component, the morphology consisted of dispersed particles of 0.5–6 μm. Larger particles were achieved by increasing the PEI content and/or lowering the casting temperature. High-temperature annealing after solution casting did not affect the morphology of blend membranes, due to the low mobility and compatibility of the two polymers.

The possible use of SPEKK/PEI blends in PEMs is discussed in terms of existing theories of ion transport in polymers.     

侧链型磺化聚芳醚酮/磺化聚乙烯醇复合型直接甲醇燃料电池用质子交换膜

通过溶液共混法制备了不同磺化聚乙烯醇(SPVA)含量的侧链型磺化聚芳醚酮/磺化聚乙烯醇(S-SPAEK/SPVA)复合膜. 应用红外光谱(FTIR)对复合膜进行了表征, 扫描电镜(SEM)显示SPVA均匀分布在复合膜中. 通过对复合膜的性能测试发现该系列复合膜具有良好的热性能、较高的吸水率和保水能力. SPVA中的羟基能有效地阻碍甲醇的透过, 甲醇渗透系数从S-SPAEK/SPVA5 复合膜的7.9×10^-7 cm²·s^-1降低到S-SPAEK/SPVA30的1.3×10^-7 cm²·s^-1, 比S-SPAEK膜的11.5×10^-7 cm²·s^-1降低了一个数量级. SPVA的引入增加了亲水基团数量, 增加了复合膜的吸水和保水能力, 有利于质子按照“Vehicle”机理和“Grotthuss”机理进行传递, 柔软的SPVA链段与S-SPAEK侧链聚集成亲水相区, 形成连续的质子传输通道, 提高了复合膜的质子传导率. 在25 和80℃ 时, S-SPAEK/SPVA30 复合膜的质子传导率分别达到了0.071 和0.095 S·cm^-1. 可见,S-SPAEK/SPVA复合膜有望在直接甲醇燃料电池中得到应用.     

Sulfonated poly(ether ether ketone)-based silica nanocomposite membranes for direct ethanol fuel cells

This paper reports on the preparation and characterization of sulfonated poly(ether ether ketone) (sPEEK)-based mixed matrix membranes. The inorganic matrix consisted of silica: Aerosil^®380, tetraethoxysilane (TEOS) or a combination of both to obtain an interconnected silica network. The behavior of these membranes in ethanol–water systems was studied for application in a direct ethanol fuel cell (DEFC). Uptake measurements showed that the converted TEOS content had a strong influence on the hydrophilicity of the membranes. Proton conductivity was strongly related to the water content in the membrane, but the proton diffusion coefficients of membranes with various Aerosil^®380–TEOS combinations were similar. Dynamic measurements in liquid–liquid (L–L) and liquid–gas (L–G) systems were performed to study the ethanol transport through the membrane. No reduction in ethanol permeability was obtained in the L–L system, but a remarkable reduction was obtained in the L–G system when 2 M ethanol was applied. The reinforcing characteristic of the combined Aerosil^®380–TEOS-system were best observed at 40 °C with 4 M ethanol. The fuel cell performance prediction based on the selectivity of proton diffusion coefficient to ethanol permeability coefficient showed for nearly all composite membranes an improvement with respect to the polymeric reference. The presence of an inorganic phase led to relatively constant proton diffusion coefficients and lower ethanol permeability coefficients in comparison with the polymeric reference.     

可逆加成-断裂链转移自由基聚合法合成梳型磺化聚醚醚酮

以带双硫酯取代基聚醚醚酮为大分子链转移剂, 采用可逆加成-断裂链转移自由基聚合(RAFT)法合成不同接枝率的磺化聚醚醚酮(g-SPEEK), 并对其结构进行表征. 在单体/链转移剂/引发剂的投料比(摩尔比)为50:4:1, 温度为70 ℃, 反应24 h, 得到聚合物膜的离子交换容量和吸水率分别为1.312 mmol/g和43.51%, 其溶胀率为5.05%, 低于Nafion膜的11.50%. 热重分析(TGA)结果表明该梳型g-SPEEK具有较好的热力学稳定性, 且该聚合物膜具有与Nafion膜相当的抗氧化性. 在相同的离子交换容量下, 梳型g-SPEEK比主链型SPEEK具有更好的H⁺离子透过性能.     

含氨基磺化聚芳醚酮砜质子交换膜的制备与性能

通过四元缩聚的方法合成了带有氨基的磺化度可控的磺化聚芳醚酮砜共聚物(Am-SPAEKS). 采用红外光谱和核磁共振谱表征了Am-SPAEKS共聚物的结构. 该共聚物膜具有较好的热性能、尺寸稳定性、较高的质子传导率和阻醇能力. 在80℃时Am-SPAEKS-1膜的质子传导率达到0.0894 S/cm, 而其甲醇渗透系数在25℃时为0.24×10^-6 cm²/s, 低于相同温度下SPAEKS膜(0.87×10^-6 cm²/s)和Nafion膜(2×10^-6 cm²/s). 结果表明, Am-SPAEKS膜能够满足质子交换膜燃料电池(PEMFC)的使用要求.     

热稳定性能良好的磺化聚醚砜酮催化剂

采用磺酸化的方法制备了一种热稳定性能良好的新型固体酸树脂催化剂——磺化聚醚砜酮树脂(S-PPESK),并应用在异丁烯的低聚反应中.S-PPESK在较低的温度条件下对异丁烯的低聚反应表现出了很高的催化活性和二聚反应选择性.对S-PPESK的热稳定性能采用预处理的方法进行了测试,结果显示它的预处理温度高达180 ℃,与商业磺酸树脂的预处理温度相比高出约40 ℃. S-PPESK在异丁烯的低聚反应中表现出了良好的催化活性、优良的二聚反应选择性和很好的热稳定性能,其应用前景广泛.     

磺化侧苯基杂萘联苯聚醚酮酮的合成与性能

以4-(3-苯基-4-羟基苯基)-2,3-二氮杂萘-1-酮(DHPZ-P)、 4-(4-羟基苯基)-2,3-二氮杂萘-1-酮(DHPZ)和1,4-二(4'-氟苯甲酰基)苯(BFBB)为原料, 经溶液亲核取代缩聚反应, 通过调节DHPZ-P和DHPZ的比例, 合成了一系列侧苯基杂萘联苯聚醚酮酮(PPEKK-P), 然后以浓硫酸为磺化剂, 制备出一系列磺化侧苯基杂萘联苯聚醚酮酮(SPPEKK-P). 利用傅里叶变换红外光谱(FTIR)和氢核磁共振谱(¹H NMR)对聚合物结构进行表征, 结果表明, 磺酸基团引入到聚合物链的侧苯基上. 采用溶液浇铸法制备SPPEKK-P质子交换膜. SPPEKK-P膜的吸水率、 溶胀率和质子传导率均随离子交换容量(IEC)的增加而增加, 且具有较好的耐氧化性. IEC最高的SPPEKK-P-100膜的质子传导率在95℃能达到7.44×10^-2 S/cm, 且甲醇渗透系数为5.57×10^-8 cm²/s, 阻醇性能优于Nafion117膜.     

Preparation and properties of UV irradiation-induced crosslinked sulfonated poly(ether ether ketone) proton exchange membranes

The crosslinkable sulfonated poly(ether ether ketone)s (SPEEKs) were synthesized by nucleophilic substitution reaction of diallyl bisphenol A, tert-butylhydroquinone, 4,4′-difluorobenzophenone and sodium 5,5′-carbonylbis(2-fluorobenzene-sulfonate). The SPEEKs with high intrinsic viscosity showed good solubility and could be cast into flexible and transparent membranes. The SPEEK membranes containing benzophenone (BP) and triethylamine (TEA) photo-initiator system were treated by UV light to promote crosslinking. The experimental results revealed that the crosslinked membrane with 10 min irradiation time showed the most potential as proton exchange membrane for direct methanol fuel cell applications. When the irradiation time increased from 0 to 10 min, the water uptake decreased from 29.1 to 26.1%, and the tensile modulus and the tensile strength enhanced sharply from 0.80 to 1.44 GPa and from 40.3 to 63.4 MPa, respectively. In addition, the methanol diffusion coefficient reduced sharply from 1.70 × 10⁻⁶ to 7.42 × 10⁻⁷ cm²/s with only slight sacrifice in the proton conductivity, which made the crosslinked membrane with 10 min irradiation time possess the highest selectivity.     

Reduced viscosity, rheology and morphological properties of sulfonated poly (ether ether ketone): Polyetherimide blends

Blends of poly (ether ether ketone) (SPEEK) and polyetherimide (PEI) were prepared in five different weight ratios, using N,N-dimethylacetamide (DMAc) as solvent. Reduced viscosity and rheological parameters of these blends were investigated. Cannon–Fenske viscometer was used to study the viscoelastic parameters of the salt-free polyelectrolyte blends and the data obtained was fitted in Fuoss–Strauss equation. Effects of temperature and concentration have been investigated. It was observed that the storage modulus (G′) and dynamic viscosity (η′) of the blends varies significantly as compare to pure SPEEK and PEI. Surface morphology and thermal behavior of the membranes were studied using scanning electron microscopy (SEM) and differential scanning calorimetry (DSC). Form SEM results it was observed that the phase separation occurs at 25% PEI contents in blends.     

聚醚醚酮酮和含联苯聚醚醚酮酮共聚物的熔融热

根据Ｆｌｏｒｙ热力学统计理论和比容－熔融热作国法，由ＤＳＣ结果得到了不同联苯含量的聚醚醚酮酮－含联苯聚醚醚酮酮（ＰＥＥＫＫ－ＰＥＢＥＫＫ）共聚物的熔融热，两种方法获得的结果吻合。在此基础上给出了ＰＥＥＫＫ－ＰＥＢＥＫＫ共聚物不同联苯含量的熔点计算表达式。结果还表明，随着联苯含量ｎＢ，的变化，明显改变；当ｎＢ＝０．３５时，ＰＥＥＫＫＰＥＢＥＫＫ共聚物的值最小。     

Polymer blend membranes of sulfonated poly(arylene ether ketone) for direct methanol fuel cell

The blend membranes of sulfonated poly(arylene ether ketone) (sPAEK) (IEC = 1.0 mequiv./g)/Nafion^® and the blend membranes of sPAEK (IEC = 1.0 mequiv./g)/sPAEK (IEC = 1.7 mequiv./g) were prepared. sPAEK with low IEC was introduced to reduce the methanol permeability through the membrane. Morphology, water uptake, proton conductivity and methanol permeability of the blend membranes were investigated by SEM, AFM, AC impedance spectroscopy and permeability measuring instrument. The cross-sections of blend membranes showed phase-separated morphologies. The effect of phase-separated morphology on the properties of blend membranes was investigated. The properties like water uptake, proton conductivity, and methanol permeability of sPAEK/Nafion^® blend membranes showed similar values with sPAEK and properties of sPAEK/sPAEK blend membranes showed intermediate values of two polymers due to the difference in morphology of the blend membranes. sPAEK/sPAEK blend membranes showed relatively high proton conductivity and lowered methanol permeability compared to Nafion^®. sPAEK/sPAEK blend membranes could be a competent substitution for Nafion^®.     

Isothermal melt and cold crystallization kinetics of poly(aryl ether ketone ether ketone ketone)

The isothermal melt and cold crystallization kinetics of poly(aryl ether ketone ether ketone ketone) are investigated by differential scanning calorimetry over two temperature regions. The Avrami equation describes the primary stage of isothermal crystallization kinetics with the exponent n ≈ 2 for both melt and cold crystallization. With the Hoffman–Weeks method, the equilibrium melting point is estimated to be 406 °C. From the spherulitic growth equation proposed by Hoffman and Lauritzen, the nucleation parameter (K_g) of the isothermal melt and cold crystallization is estimated. In addition, the K_g value of the isothermal melt crystallization is compared to those of the other poly(aryl ether ketone)s. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1992–1997, 2000     

全钒液流电池用磺化聚醚醚酮/锂皂石质子膜的结构及性能

通过溶液流延法制备了磺化聚醚醚酮/锂皂石(SPEEK/Lap)复合膜, 对其物理化学性质、 机械性能、 化学稳定性及单电池性能进行了测试. 在SPEEK基质中引入的Lap有效改善了复合膜的质子传导率、 溶胀率和机械性能. 当Lap添加量(质量分数)从0.2%增到1.5%时, 复合膜的质子传导率随之增加(19.9~23.6 mS/cm). SPEEK/Lap-0.2复合膜的自放电时间为57.2 h, 是Nafion 117膜的2.4倍和纯SPEEK膜的1.5倍. 在80 mA/cm ²电流密度下, SPEEK/Lap-0.2复合膜的电压效率(VE, 86.5%)和能量效率(EE, 84.0%)明显高于Nafion 117膜(VE: 83.8%, EE: 80.7%)和纯SPEEK膜(VE: 81.4%, EE: 78.9%). 同时, SPEEK/Lap-0.2复合膜经100次充放电循环测试后具有良好的循环稳定性和结构稳定性.     

Preparation and characterization of nanofiltration membranes by coating polyethersulfone hollow fibers with sulfonated poly(ether ether ketone) (SPEEK)

A new type of nanofiltration membrane is reported based on coating a sulfonated poly(ether ether ketone) (SPEEK) layer on top of a polyethersulfone support. The membranes were characterized by dextran mixtures, salt solutions as well as negatively charged dyes. The SPEEK coated nanofiltration membranes showed molecular weight cutoff for dextran in the range of ultrafiltration, however, rather high rejection for sodium sulfate; retention for salts in the order of RNa₂SO₄>RNaCl>RMgCl₂$R_{\text{N}{\text{a}}_2\text{S}{\text{O}}_4}>R_{\text{NaCl}}>R_{\text{MgC}{\text{l}}_2}$; in addition, the membranes showed a 97–100% retention to the organic dyes. The rejection rates were improved by an increase in the coating thickness and the polymer concentration in the coating solution at the penalty of permeability decrease. Furthermore, it was found that pore penetration of SPEEK into the support membrane effectively constrained the swelling rate of SPEEK and increased the retention. The Donnan–Steric Pore Model was used to describe the transport properties of the membrane. Modeling identified a very tortuous passage within the active separation layer.