Comparison of different calibration approaches in the application of thermal desorption technique: A test on gaseous reduced sulfur compounds

In this study, the reliability of thermal desorbing technique was investigated using the gaseous standards of five reduced sulfur compounds (RSCs: hydrogen sulfide, methane thiol, dimethyl sulfide, carbon disulfide, and dimethyl disulfide). A series of calibration experiments for RSCs were performed using gas chromatography (GC) with pulsed flame photometric detector (PFPD) that is interfaced with a thermal desorber (TD) unit. These calibration data were evaluated by means of two contrasting concepts: fixed standard concentration method (FSC: variable volumetric injection of standard gases prepared at a given concentration) and fixed standard volume method (FSV: injection of multiple standards with varying concentrations at a given volume). When the results of both methods were compared, RSCs generally showed enhanced sensitivity with increasing concentration (FSC) and sample loading volume (FSV). This study highlights that TD-based calibration properties are practically undistinguishable between different sample transfer approaches (e.g., FSV and FSC). As a result, the calibration properties of RSCs derived by thermal desorption technique are greatly distinguished from those of direct injection into GC.     

The fundamental properties of the direct injection method in the analysis of gaseous reduced sulfur by gas chromatography with a pulsed flame photometric detector

In this study, the fundamental aspects of gas chromatography with a pulsed flame photometric detector were investigated through the calibration of gaseous reduced sulfur compounds based on the direct injection method. Gaseous standards of five reduced sulfur compounds (hydrogen sulfide, methane thiol, dimethyl sulfide, carbon disulfide, and dimethyl disulfide) were calibrated as a function of injection volume and concentration level. The results were evaluated by means of two contrasting calibration approaches: fixed standard concentration method (variable volumetric injection of standard gases prepared at a given concentration) and fixed standard volume method (injection of multiple standards with varying concentrations at a given volume). The optimum detection limit values of reduced sulfur compounds, when estimated at 100 μL of injection volume, ranged from 2.37 pg (carbon disulfide) to 4.89 pg (dimethyl sulfide). Although these detection limit values improved gradually with decreasing injection volume, the minimum detectable concentration (e.g., in nmol mol⁻¹ scale) remained constant due to a balance by the sample volume reduction. The linearity property of pulsed flame photometric detector also appeared to vary dynamically with changes in its sensitivity. According to this study, the performance of pulsed flame photometric detector, when tested by direct injection method, is highly reliable to precisely describe the behavior of reduced sulfur compounds above ∼20 nmol mol⁻¹.     

Effects of injection volume change on gas chromatographic sensitivity determined with two contrasting calibration approaches for volatile organic compounds

In this study, the effects of injection volume change on gas chromatographic detection properties have been evaluated using gas-phase standards containing three aromatic volatile organic compounds (VOC): benzene, toluene, and xylene (commonly called BTX). To examine such effects on GC sensitivity, a series of calibration data sets were obtained using standards of three concentration values (3, 6, and 10 ppm) at each of five selected injection volumes (20 to 1000 microL). The results were initially examined in terms of the fixed standard volume (FSV) approach to allow the direct comparison of calibration patterns between different injection volumes. Identical data sets were then re-organized so that the calibration data could also be compared across variable injection volumes for a given standard concentration (at all three concentrations), i.e. by the fixed standard concentration (FSC) approach. The results of our comparative analysis between the FSV and the FSC approaches indicate that the calibration patterns of VOC are highly sensitive to changes in injection volume or injection-related conditions. It is thus suggested that the former approach is more reasonable for reducing uncertainties associated with the GC-based quantification of atmospheric pollutants.     

An evaluation of two calibration procedures using thermal desorption-gas chromatography in the analysis of odorous volatile compounds

In this study, the relative performance of gas chromatography (GC) was investigated with respect to the differences in two types of calibration approaches with a thermal desorption (TD) method: the fixed standard concentration approach (FSC: the comparison of different sample volumes for a given standard) was compared with the fixed standard volume approach (FSV: the comparison of different concentration standards at a fixed loading volume). Gaseous working standards of seven odorants, including methyl ethyl ketone (MEK), butyl acetate, methyl isobutyl ketone, isobutyl alcohol, toluene, xylene, and a reference component, benzene, were prepared at four concentration levels (10-100 ppb). They were then analyzed by controlling the TD-loading volumes at six levels (40-1200 mL). The results derived by these contrasting calibration approaches showed moderate changes in the GC sensitivity, either with an increasing concentration (i.e., FSC), or with an increasing sample loading volume (i.e., FSV). Despite an eccentric trend of MEK, the TD-based analysis was fairly predictable and can be recommended for the analysis of the selected odorants.     

Solid-phase microextraction—Gas chromatography to determine volatile organic sulfur compounds in the air at sewage treatment plants

Solid-phase microextraction (SPME) was applied to the determination of 7 volatile organic sulfur compounds (VOSCs), which were analysed by gas chromatography-mass spectrometry. The compounds studied were ethyl mercaptan (CH₃CH₂SH), dimethyl sulfide ((CH₃)₂S), carbon disulfide (CS₂), propyl mercaptan (C₃H₈S), butyl mercaptan (C₄H₁₀S), dimethyl disulfide ((CH₃)₂S₂) and 1-pentanethiol (C₅H₁₂S). Temperature and time conditions of SPME extraction were optimised and the method was validated, with good linearity in a calibration range between 0.1 and 1000 μg m⁻³. Method detection limits ranged between 0.01 and 0.08 μg m⁻³ and method quantification limits were between 0.10 and 0.25 μg m⁻³, allowing real samples taken from several different areas of a sewage treatment plant to be analysed. Repeatability of the method between samples went from 5.6% for pentanethiol up to 14.2% for carbon disulfide, and concentrations of total target compounds were found between 18 and 529 μg m⁻³, depending on the sampling site.     

A method to test the detectability of GC/PFPD for an extended concentration range with respect to reduced sulfur compounds

In this study, a possible means to extensively expand the quantifiable range of reduced sulfur compounds (RSC) in air has been investigated by a combined application of GC with pulsed flame photometric detector (PFPD) and a multifunction thermal desorber (TD) system. To comply with the purpose of this study, gaseous RSC standards containing the equimolar concentrations of H(2)S, CH(3)SH, DMS, DMDS, and CS(2 )were prepared at 11 concentration levels (i. e., 10 ppb-10 ppm (over 10(3 )range)). These standards were then used to derive three-point calibrations based on the modified injection through a TD (MITD). If the mean calibration slopes of each concentration level are normalized to that of CH(3)SH, the relative ordering is found as 0.65 (H(2)S): 1 (CH(3)SH): 1.34 (DMS): 2.24 (DMDS). The reproducibility of MITD method, when assessed in terms of relative standard error (RSE) for all calibration slopes, had the most stable pattern for DMDS (5.77%) and the least stable one for H(2)S (12.8%). The sensitivity of the MITD-based calibration generally improved with an increase in concentration levels of standard gas. Based on our study, the MITD technique is useful to extend quantification of GC/PFPD by allowing RSC detection over a 10(3) range.     

Development of a sequential injection system for trace mercury determination by cold vapour atomic absorption spectrometry utilizing an integrated gas-liquid separator/reactor

A simple and robust time-based on-line sequential injection system for trace mercury determination via cold vapour atomic absorption spectrometry (CVAAS), employing a new integrated gas-liquid separator (GLS), which in parallel operates as reactor, was developed. Sample and reductant are sequentially loaded into the GLS while an argon flow delivers the released mercury vapour through the atomic absorption cell. The proposed method is characterized by the ability of successfully managing variable sample volume up to 30 ml in order to achieve high sensitivity. For 20 ml sample volume, the sampling frequency is 25 h⁻¹. The calibration curve is linear over the concentration range 0.05-5.0 μg l⁻¹ of Hg(II), the detection limit is c_L = 0.02 μg l⁻¹, and the relative standard deviation is s_r = 2.6% at 1.0 μg l⁻¹ Hg(II) level. The performance of the proposed method was evaluated by analyzing certified reference material and applied to the analysis of natural waters and biological samples.     

A highly stable and sensitive chemically modified screen-printed electrode for sulfide analysis

We report here a highly stable and sensitive chemically modified screen-printed carbon electrode (CMSPE) for sulfide analysis. The CMSPE was prepared by first ion-exchanging ferricyanide into a Tosflex anion-exchange polymer and then sealing with a tetraethyl orthosilicate sol-gel layer. The sol-gel overlayer coating was crucial to stabilize the electron mediator (i.e., Fe(CN)₆³⁻) from leaching. The strong interaction between the oxy-hydroxy functional group of sol-gel and the hydrophilic sites of Tosflex makes the composite highly rigid to trap the ferricyanide mediator. An obvious electrocatalytic sulfide oxidation current signal at ∼0.20 V versus Ag/AgCl in pH 7 phosphate buffer solution was observed at the CMSPE. A linear calibration plot over a wide range of 0.1 μM to 1 mM with a slope of 5.6 nA/μM was obtained by flow injection analysis. The detection limit (S/N = 3) was 8.9 nM (i.e., 25.6 ppt). Practical utility of the system was applied to the determination of sulfide trapped from cigarette smoke and sulfide content in hot spring water.     

Determination of flavone C-glucosides in antioxidant of bamboo leaves (AOB) fortified foods by reversed-phase high-performance liquid chromatography with ultraviolet diode array detection

A sensitive solid-phase microextraction and gas chromatography-pulsed flame photometric detection technique was developed to quantify volatile sulfur compounds in wine. Eleven sulfur compounds, including hydrogen sulfide, methanethiol, ethanethiol, dimethyl sulfide, diethyl sulfide, methyl thioacetate, dimethyl disulfide, ethyl thioacetate, diethyl disulfide, dimethyl trisulfide and methionol, can be quantified simultaneously by employing three internal standards. Calibration curves were established in a synthetic wine, and linear correlation coefficients (R2) were greater than 0.99 for all target compounds. The quantification limits for most volatile sulfur compounds were 0.5 ppb or lower, except for methionol which had a detection limit of 60 ppb. The recovery was studied in synthetic wine as well as Pinot noir, Cabernet Sauvignon, Pinot Grigio, and Chardonnay wines. Although the sulfur compounds behaved differently depending on the wine matrix, recoveries of greater than 80% were achieved for all sulfur compounds. This technique was applied to analyze volatile sulfur compounds in several commercial wine samples; methionol concentrations were found at the ppm level, while the concentrations for hydrogen sulfide, methanethiol, and methyl thioacetate were at ppb levels. Only trace amounts of disulfides and trisulfides were detected, and ethanethiol was not detected.     

Microvolume turbidimetry for rapid and sensitive determination of the acid labile sulfide fraction in waters after headspace single-drop microextraction with in situ generation of volatile hydrogen sulfide

In this work, we demonstrate the feasibility of applying headspace single-drop microextraction with in-drop precipitation for the quantitative determination of the acid labile sulfide fraction (H₂S, HS⁻, and S²⁻ (free sulfide), amorphous FeS and some metal sulfide complexes-clusters as ZnS) in aqueous samples by microvolume turbidimetry. The methodology lies in the in situ hydrogen sulfide generation and subsequent sequestration into an alkaline microdrop containing ZnO₂²⁻ and exposed to the headspace above the stirred aqueous sample. The ZnS formed in the drop was then determined by microvolume turbidimetry. The optimum experimental conditions of the proposed method were: 2 μL of a microdrop containing 750 mg L⁻¹ Zn(II) in 1 mol L⁻¹ NaOH exposed to the headspace of a 20-mL aqueous sample stirred at 1600 rpm during 80 s after derivatization with 1 mL of 6 mol L⁻¹ HCl. An enrichment factor of 1710 was achieved in only 80 s. The calibration graph was linear in the range of 5-100 μg L⁻¹ with a detection limit of 0.5 μg L⁻¹. The repeatability, expressed as relative standard deviation, was 5.8% (N = 9). Finally, the proposed methodology was successfully applied to the determination of the acid labile sulfide fraction in different natural water samples.     

Determination of Sulfur Compounds in Air by Chemiluminescence

Abstract

The present review is devoted to applications of chemiluminescence to the analysis of trace sulfur species in air. Determinations of oxidized (sulfur dioxide and sulfite), reduced (hydrogen sulfide, dimethyl sulfide, carbonyl sulfide, carbon disulfide and mercaptans) and/or sulfur compounds in general are described and some practical considerations are discussed. The development of detectors based on chemiluminescence in the aproximately last fifteen years is also reviewed.     

GC–MS Analysis of Hydrogen Sulfide,Carbonyl Sulfide,Methanethiol, Carbon Disulfide,Methyl Thiocyanate and Methyl Disulfide in Mainstream Vapor Phase Cigarette Smoke

A method is described for the simultaneous analysis of hydrogen sulfide, carbonyl sulfide, methanethiol, carbon disulfide, methyl thiocyanate and methyl disulfide in mainstream vapor phase (MVP) cigarette smoke by gas chromatography–mass spectrometry. The fresh MVP smoke was collected in a gas bag, followed by injection of a 50 μL gas sample into the GC inlet via an automatic six-port valve. The separation was on a CP-PoraPLOT Q column and MS was operated in SIM mode. It was found that while carbonyl sulfide and carbon disulfide are very stable in the gas bag, hydrogen sulfide, methanethiol, methyl disulfide and methyl thiocyanate are extremely reactive and their levels increase or decrease drastically with the storage time in the gas bag. These results suggest that there is an absolute need to analyze the smoke sample as quickly as possible. Maintaining a precise time after the smoke collection is a key factor in order to obtain reproducible results. In this study, all the samples are injected within 2 min after MVP smoke was collected in the bag. Under smoke conditions of 60 mL puff of 2 s duration every 30 s, 12 brands of commercial cigarettes and Kentucky Reference 2R4F cigarettes were analyzed. Average values of three replicates of the 2R4F cigarettes were 31.6 μg cigt^?1 hydrogen sulfide, 40.7 μg cigt^?1 carbonyl sulfide, 25.6 μg cigt^?1 methanethiol, 2.2 μg cigt^?1 carbon disulfide, 23.7 μg cigt^?1 methyl thiocyanate and 17.6 μg cigt^?1 methyl disulfide. All other types of analyzed cigarettes show a similar quantitative distribution for these analytes.     

A novel TiO2 nanotube array/Ti wire incorporated solid-phase microextraction fiber with high strength,efficiency and selectivity

A novel solid-phase microextraction (SPME) fiber is fabricated through the anodization of Ti wire substrates in an electrolyte containing ethylene glycol and NH₄F. By a combination of field emission scanning electron microscope and X-ray photoelectron spectroscope studies, it is shown that perpendicularly orientated and well-aligned TiO₂ nanotubes are grown in situ on the Ti wire substrate. The SPME fiber coupled with gas chromatograph (GC) is then used to extract polycyclic aromatic hydrocarbons (PAHs), anilines, phenols, and alkanes from standard and real water samples, and exhibits high selectivity for PAHs. After the optimization of adsorption factors (pH, ionic strength, time and temperature) and desorption factors (time and temperature) of the SPME fiber for PAHs, the limit of detection (LOD) of less than 0.1 μg L⁻¹ is achieved, and the calibration curves are all linear (R² ≥ 0.9898) in the range from 0.1 to 1000 μg L⁻¹. Beyond that, the SPME fiber has high strength, large surface area, good stability at high temperature and in acid and alkali solutions, and long service life, making it have strong application potentials in the selective extraction of PAHs from complex samples at trace levels.     

Comparison of comprehensive two-dimensional gas chromatography/time-of-flight mass spectrometry and gas chromatography-mass spectrometry for the analysis of tobacco essential oils

A sample of tobacco essential oil was analyzed using gas chromatography-mass spectrometry (GC/MS) and comprehensive two-dimensional gas chromatography coupled to a time-of-flight mass spectrometry (GC × GC/TOFMS), respectively. In the GC/MS analysis, serially coupled columns were used. By comparing the GC/MS results with GC × GC/TOFMS results, many more components in the essential oil could be found within the two-dimensional separation space of GC × GC. The quantitative determination of components in the essential oil was performed by GC × GC with flame ionization detection (FID), using a method of multiple internal standards calibration.     

Sequential injection anodic stripping voltammetry with monosegmented flow and in-line UV digestion for determination of Zn(II), Cd(II), Pb(II) and Cu(II) in water samples

A cost-effective sequential injection system incorporating with an in-line UV digestion for breakdown of organic matter prior to voltammetric determination of Zn(II), Cd(II), Pb(II) and Cu(II) by anodic stripping voltammetry (ASV) on a hanging mercury drop electrode (HMDE) of a small scale voltammetric cell was developed. A low-cost small scale voltammetric cell was fabricated from disposable pipet tip and microcentrifuge tube with volume of about 3 mL for conveniently incorporated with the SI system. A home-made UV digestion unit was fabricated employing a small size and low wattage UV lamps and flow reactor made from PTFE tubing coiled around the UV lamp. An in-line single standard calibration or a standard addition procedure was developed employing a monosegmented flow technique. Performance of the proposed system was tested for in-line digestion of model water samples containing metal ions and some organic ligands such as strong organic ligand (EDTA) or intermediate organic ligand (humic acid). The wet acid digestion method (USEPA 3010a) was used as a standard digestion method for comparison. Under the optimum conditions, with deposition time of 180 s, linear calibration graphs in range of 10-300 μg L⁻¹ Zn(II), 5-200 μg L⁻¹ Cd(II), 10-200 μg L⁻¹ Pb(II), 20-400 μg L⁻¹ Cu(II) were obtained with detection limit of 3.6, 0.1, 0.7 and 4.3 μg L⁻¹, respectively. Relative standard deviation were 4.2, 2.6, 3.1 and 4.7% for seven replicate analyses of 27 μg L⁻¹ Zn(II), 13 μg L⁻¹ Cd(II), 13 μg L⁻¹ Pb(II) and 27 μg L⁻¹ Cu(II), respectively. The system was validated by certified reference material of trace metals in natural water (SRM 1640 NIST). The developed system was successfully applied for speciation of Cd(II) Pb(II) and Cu(II) in ground water samples collected from nearby zinc mining area.     

Transferable potentials for phase equilibria. 8. United-atom description for thiols, sulfides, disulfides, and thiophene

An extension of the transferable potentials for phase equilibria united-atom (TraPPE-UA) force field to thiol, sulfide, and disulfide functionalities and thiophene is presented. In the TraPPE-UA force field, nonbonded interactions are governed by a Lennard-Jones plus fixed point charge functional form. Partial charges are determined through a CHELPG analysis of electrostatic potential energy surfaces derived from ab initio calculations at the HF/6-31g+(d,p) level. The Lennard-Jones well depth and size parameters for four new interaction sites, S (thiols), S(sulfides), S(disulfides), and S(thiophene), were determined by fitting simulation data to pure-component vapor-equilibrium data for methanethiol, dimethyl sulfide, dimethyl disulfide, and thiophene, respectively. Configurational-bias Monte Carlo simulations in the grand canonical ensemble combined with histogram-reweighting methods were used to calculate the vapor-liquid coexistence curves for methanethiol, ethanethiol, 2-methyl-1-propanethiol, 2-methyl-2-propanethiol, 2-butanethiol, pentanethiol, octanethiol, dimethyl sulfide, diethyl sulfide, ethylmethyl sulfide, dimethyl disulfide, diethyl disulfide, and thiophene. Excellent agreement with experiment is achieved, with unsigned errors of less than 1% for saturated liquid densities and less than 3% for critical temperatures. The normal boiling points were predicted to within 1% of experiment in most cases, although for certain molecules (pentanethiol) deviations as large as 5% were found. Additional calculations were performed to determine the pressure-composition behavior of ethanethiol+n-butane at 373.15 K and the temperature-composition behavior of 1-propanethiol+n-hexane at 1.01 bar. In each case, a good reproduction of experimental vapor-liquid equilibrium separation factors is achieved; both of the coexistence curves are somewhat shifted because of overprediction of the pure-component vapor pressures.     

Automated stopped-in-dual-loop flow analysis system for catalytic determination of vanadium in drinking water

An automated stopped-in-dual-loop flow analysis (SIDL-FA) system is proposed for the determination of vanadium in drinking water. The chemistry is based on the vanadium-catalyzed oxidation reaction of p-anisidine by bromate in the presence of Tiron as an activator to produce a dye (λ_max = 510 nm). A SIDL-FA system basically consists of a selection valve, three pumps (one is for delivering of standard/sample, and others are for reagents), two six-way injection valves, a spectrophotometric detector and a data acquisition device. A 100-μL coiled loop around a heated device is fitted onto each six-way injection valve. A well-mixed solution containing reagents and standard/sample is loaded into the first loop on a six-way valve, and then the same solution is loaded into the second loop on another six-way valve. The solutions are isolated by switching these two six-way valves, so that the catalytic reaction can be promoted. The net waste can be zero in this stage, because all pumps are turned off. Then each resulting solution is dispensed to the detector with suitable time lag. A touchscreen controller is developed to automatically carry out the original SIDL-FA protocol. The proposed SIDL-FA method allows vanadium to be quantified in the range of 0.1-2 μg L⁻¹ and is applied to the determination of vanadium in drinking water samples.     

Direct determination of melamine in dairy products by gas chromatography/mass spectrometry with coupled column separation

A coupled capillary column system was developed for the qualitative and quantitative determination of melamine with isotope internal standard in dairy products by gas chromatography/mass spectrometry (GC/MS) without derivatization. A 30 m of DB-5ms ((5%-phenyl)-methylpolysiloxane, 0.25 mm i.d., 0.25 μm df) coupled with a 1.5 m of Innowax (polyethylene glycol, 0.32 mm i.d., 0.25 μm df) by a quartz capillary column connector was introduced as separation column. Three advantages were discussed for the coupled system. The sample was fortified with a ring-labeled ¹³C₃¹⁵N₃-melamine as an isotope internal standard and extracted by 1% of trichloroacetic acid aqueous solution. 2.2% of lead acetate solution was then added to deposit protein in the sample matrix. After purification by cation exchange cartridge, the sample solution was directly injected and detected by GC/MS. A six-point calibration curve ranging from 0.05 to 2 mg kg⁻¹ of melamine in sample was used to establish instrument response. The recovery was 93.9-102% with relative standard deviation from 3.1 to 8.7% when isotope internal standard used. The calculated method detection limit was 0.01 mg kg⁻¹.     

Rapid estimation of trace organophosphonate used as a scale inhibitor in aqueous systems by reactive pyrolysis-gas chromatography/mass spectrometry

The determination of trace organophosphonates which are used in cooling towers as a scale inhibitor usually involves extraction and/or concentration of the target components prior to analysis. The extracts are analyzed using chromatographic or spectroscopic methods. This methodology is not only cumbersome but also results in poor data quality. This work presents a novel approach for the rapid and sensitive determination of trace amounts of an organophosphonate: 1-hydroxyethylidene-1,1-diphosphonic acid (HEDP) in aqueous solution. This method is based upon reactive pyrolysis-GC/MS in the presence of tetramethyl ammonium hydroxide (TMAH). Approximately 10 μL of the aqueous sample containing a trace amount of HEDP and 1 μL of 25% a methanol TMAH solution was placed in the sample cup. The cup was then dropped into the furnace which was at 350 °C. The heat initiated the hydrolysis of the organophosphonate followed by the methylation of the hydrolysates. Trimethylphosphate (TMP) was detected by GC/MS. The level of TMP is related to the level of the phosphonate, HEDP in the aqueous sample. Using an external standard calibration curve, it was possible to make a rapid estimation of mg/L levels of organophosphate.     

Selective Determination of Dimethyl Sulfide in Seawater Using Reactive Extractive Electrospray Ionization Mass Spectrometry

Reactive extractive electrospray ionization mass spectrometry was used for the rapid, sensitive determination of dimethyl sulfide in seawater without sample pretreatment. Using silver cations (Ag⁺) as the ionic reagent, the analyte was selectively extracted from seawater to form adduct ions of [CH₃SCH₃?+?Ag]⁺. The characteristic product ions of Ag⁺, generated from parent ions of [CH₃SCH₃?+?Ag]⁺ by tandem mass spectrometry, were used for quantitative analysis. A linear calibration curve was obtained from 1 to 10,000 pg/mL with acceptable relative standard deviations of 3.2–8.1%. This method provided a low limit of detection (0.3 pg/mL), reasonable recovery (82–111%), and acceptable precision (3.9 and 4.2% for intraday and interday measurements). Trace dimethyl sulfide was determined in seawater by this method. These results demonstrate that reactive electrospray ionization mass spectrometry is suitable for the rapid, reliable, and sensitive determination of dimethyl sulfide in seawater. Further investigations will improve our understanding on the relationship between global climate change and dimethyl sulfide concentrations in the ocean.