Near infrared emission photometer for measuring the oxidative stability of edible oils

Near infrared emission spectroscopy (NIRES) allows the determination of the induction time (IT) of edible oils in accelerated oxidation experiments by monitoring the emissivity of a band at 2900 nm, which corresponds to the formation of hydroperoxides. In this work, a new near infrared emission photometer dedicated to the determination of oxidative stability is described. The photometer presents several advantages compared to the previously reported NIRES instrument, such as lower cost and extreme simplicity of design and maintenance. The results obtained in the evaluation of the proposed instrument were compared with the official Rancimat method and instrument. The significant advantages include: faster analysis, lower sample consumption and operational simplicity. It is demonstrated that the procedure for determination of oxidative stability of oils can be significantly simplified and performed by measuring the sample emission at only one spectral region centered at 2900 nm. Also, the proposed instrument and method present precision equivalent to the Rancimat method (coefficient of variation = 5.0%). A significant correlation between the methods has been found (R² = 0.81).     

Thermal and oxidative stability of Sacha Inchi oil and capsules formed with biopolymers analyzed by DSC and <Superscript>1</Superscript>H NMR

The oxidative stability of edible oils is an important feature to know due the undesirable changes that can occur in the storage. In this way, the oxidative induction time (OIT) value is an indicative to prevent this effect. The objectives of this study were to evaluate the omega-3 content and kinetic parameters of Sacha Inchi oil (SIO) and capsules that are formed with biopolymers, in addition, there were analyzed with differential scanning calorimetry (DSC) and proton nuclear magnetic resonance (¹H NMR). The SIO and capsules, formed using an emulsion, were analyzed with DSC in an oxygen atmosphere to determine the OIT value in isothermal conditions at 100, 120 and 150 °C. The kinetic parameters (activation energy, pre-exponential factor and z value) of SIO were obtained, and the stability time was predicted at different temperatures. The ¹H NMR spectra enabled us to assess the identification and percentage relative before and after the isothermal DSC oxidation of omega-3 concentration and formation of their oxidized compounds. (E-E)-2,4-Alkadienals were the primary oxidized compound and is strongly correlated with the decrease in omega-3 content. Isothermal DSC is a useful to determine the OIT (min) and kinetic parameters to predict the stability oxidation in different edible oils and thus prevent the inadequate consumption of edible oils oxidized.     

DSC Study of Oxidation Induction Periods

A theory of the evaluation of kinetic parameters of induction periods for non-isothermal processes is outlined and a method to obtain the parameters from non-isothermal differential scanning calorimetry measurements, based on the dependence of onset temperature of oxidation peak on heating rate, is presented. The applicability of the method is demonstrated on the study of oxidation induction periods of edible oils and polyolefines. In all cases, the parameters of an Arrhenius-like equation describing the temperature dependence of induction period have been obtained. It is shown that the method gives the parameters not affected by oxygen diffusion which are transferable to be used in modelling the non-isothermal induction periods where the effects of diffusion, heat transfer and evolution of reaction heat are explicitly involved. A method of estimating the residual stability after a thermooxidative stress of the material is suggested. This revised version was published online in July 2006 with corrections to the Cover Date.     

Evaluation of antioxidant activity of hydrophilic and lipophilic compounds in edible oils by a novel fluorimetric method

A novel fluorimetric method is described for the evaluation of the antioxidant activity of hydrophilic and lipophilic compounds and complex natural products such as edible oils. The method is based on the measurement of fluorescence emission intensity of N-methylacridone produced during the reaction of lucigenin with hydrogen peroxide. The presence of antioxidants in the sample inhibits the concentration of N-methylacridone and reduces the fluorescence intensity. The method was fully validated and applied to a variety of hydrophilic and lipophilic compounds as well as to various types of edible oils and their corresponding hydrophilic and lipophilic extracts. Results were compared to those derived from a lucigenin based chemiluminescent method and the Folin-Ciocalteau method for total phenols. The differences in total antioxidant activity of edible oils of various origins and the effect of heating on total antioxidant activity was further studied and discussed.     

Comparison of the oxidative stability of soybean and sunflower oils enriched with herbal plant extracts

The present study was conducted to determine and compare the oxidative stability of soybean and sunflower oils using differential scanning calorimetry (DSC). These edible oils were enriched with marjoram (Origanum majorana L.), thyme (Thymus vulgaris L.), and oregano (Origanum vulgare L.) extracts at three different concentrations and synthetic antioxidant (BHA). The fatty acid composition of studied oils was determined by gas chromatography mass spectrometry to evaluate the content of unsaturated fatty acids that are sensitive to oxidation process. Oil samples were heated in the DSC at different heating rates (4.0, 7.5, 10.0, 12.5, and 15.0 °C min^?1) and oxidation kinetic parameters (activation energy, pre-exponential factor, and oxidation rate constant) were calculated. The results showed that the oxidative stability of sunflower oil samples enriched with oregano extracts and soybean oil supplemented with thyme extracts was improved compared to samples without the addition of herbal plant extracts and the synthetic antioxidant.     

Infrared study of aging of edible oils by oxidative spectroscopic index and MCR-ALS chemometric method

One of the most suitable analytical techniques used for edible oil quality control is Fourier transform mid infrared spectroscopy (FT-MIR). FT-MIR spectroscopy was used to continuously characterize the aging of various edible oils thanks to a specific aging cell. There were differences in the spectra of fresh and aged oils from different vegetable sources, which provide the basis of a method to classify them according to the oxidative spectroscopic index value. The use of chemometric treatment such as multivariate curve resolution-alternative least square (MCR-ALS) made it possible to extract the spectra of main formed and degraded species. The concentration profiles gave interesting information about the ability of the various oils to support the oxidative treatment and showed that all oils present the same aging process. Both methods led to concordant results in terms of induction times determined by the oxidative spectroscopic index and the appearance of oxidation products revealed by MCR-ALS.     

Comparison of olive,corn, soybean and sunflower oils by PDSC

Vegetable oils of different types and qualities are widely used in homemade cooking and food industry. Most of the safety concerns were related to possible oxidation processes produced at the relatively high temperatures used when frying. Thus, the thermal stability to oxidation is an important parameter for edible oils. Oils from the Arbequina, Picual, Hojiblanca and Cornicabra olive varieties, corn, soybean and sunflower are studied in this work by means of pressure differential scanning calorimetry (PDSC). The general aim of this work is to evaluate the thermooxidative stability of these vegetable oils by the ASTM onset oxidation temperature (OOT) method. In addition, the ability of some parameters to identify different oils and some relations between the chemical composition and the OOT results are investigated.     

Rapid screening of mixed edible oils and gutter oils by matrix-assisted laser desorption/ionization mass spectrometry

Authentication of edible oils is a long-term issue in food safety, and becomes particularly important with the emergence and wide spread of gutter oils in recent years. Due to the very high analytical demand and diversity of gutter oils, a high throughput analytical method and a versatile strategy for authentication of mixed edible oils and gutter oils are highly desirable. In this study, an improved matrix-assisted laser desorption/ionization mass spectrometry (MALDI-MS) method has been developed for direct analysis of edible oils. This method involved on-target sample loading, automatic data acquisition and simple data processing. MALDI-MS spectra with high quality and high reproducibility have been obtained using this method, and a preliminary spectral database of edible oils has been set up. The authenticity of an edible oil sample can be determined by comparing its MALDI-MS spectrum and principal component analysis (PCA) results with those of its labeled oil in the database. This method is simple and the whole process only takes several minutes for analysis of one oil sample. We demonstrated that the method was sensitive to change in oil compositions and can be used for measuring compositions of mixed oils. The capability of the method for determining mislabeling enables it for rapid screening of gutter oils since fraudulent mislabeling is a common feature of gutter oils.     

Characterization of oil from roasted hemp seeds using the PDSC and FTIR techniques

The purpose of the present work was to characterize oil extracted from roasted hemp seeds using the PDSC and FTIR techniques. Roasting was conducted in a laboratory convective dryer. DSC method was used for the determination of the oxidative stability of oil extracted from hemp seeds. Pressure differential scanning calorimetry experiments were carried out using a DSC Q20, TA Instruments, coupled with a high-pressure cell. The isothermal temperature (393 K) was used for the data collection. The oxidative induction time was obtained from the PDSC curves. Infrared spectra were registered for every sample in the classic range of 4000–400 cm^?1 with 1 cm^?1 resolution, using System 2000 PerkinElmer instrument. The Grams AI 8.0 and TQ Analyst 8 software were used for spectral data processing. The samples of oil were also characterized by standard quality parameters: fatty acids composition (with use of GC technique), free fatty acids content by titration with 0.1 M potassium hydroxide and peroxide value determined by iodometric titration technique. Samples of oil extracted from hemp seeds after roasting in higher temperatures were characterized by lower induction time than oil from hemp seeds roasted in lower temperature. The results confirm that the induction time obtained from PDSC measurements can be used as parameters for the assessment of the resistance of oils from roasted hemp seeds to their thermal–oxidative decomposition.

     

Rosemary (Rosmarinus officinalis L.) extract

The restriction to the use of synthetic antioxidants has fostered the research on natural antioxidants, taking into account that the prolonged usage of these substances can harm seriously the human being provoking degenerative diseases. In the present study, the antioxidant effect of the ethanolic rosemary (Rosmarinus officinalis L.) extract on the oxidative stability of edible vegetable oils was investigated by means of the pressurized differential scanning calorimetry (PDSC) and oven test techniques. The rosemary extract, at the concentration of 2,000 mg kg^?1, as well as the synthetic antioxidant tert-butylhydroquinone (TBHQ) at the concentrations of 100 and 200 mg kg^?1 were added to samples of sunflower oil, corn oil, and soybean oil. The fatty acid profiles of the vegetable oils were determined by gas chromatography–mass spectrometry confirming the elevated contents of unsaturated fatty acids. The thermogravimetric analysis showed that the rosemary extract is stable at the frying temperature of the oils. The results of the oxidative stability demonstrated that the extract of Rosmarinus officinalis displayed a more effective protective action in the PDSC technique, when compared with the synthetic antioxidant TBHQ, indicating that it is a promising source of natural antioxidants for edible vegetable oils.     

Determination of polycyclic aromatic hydrocarbons in vegetable oils using solid-phase microextraction-comprehensive two-dimensional gas chromatography coupled with time-of-flight mass spectrometry

A simple and fast solid-phase microextraction method coupled with comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometry was developed for analysis of polycyclic aromatic hydrocarbons in edible oil, performed directly in a hexane solution of the oil. Sampling conditions (solvent used, extraction time, extraction temperature and fiber rinsing time) were optimized by using a sample of oil fortified with a standard solution of polycyclic aromatic hydrocarbons. The method was validated by calculating linear range, correlation coefficient, accuracy, repeatability, detection limit and quantification limit. The method was applied to several oils collected from the market and directly from an olive pomace extraction plant.     

基于近红外光谱的食用植物油中反式脂肪酸含量快速定量检测及模型优化研究

利用近红外光谱技术对食用植物油中反式脂肪酸(Trans fatty acids,TFA)含量进行快速定量检测,并通过波段选择、预处理方法、变量筛选及建模方法对TFA含量预测模型进行优化.采用AntarisⅡ傅里叶变换近红外光谱仪在4000~10000 cm-1光谱范围采集98个食用植物油样本的近红外透射光谱,然后采用气相色谱法测定TFA的真实含量.首先,对样本原始光谱进行波段、预处理方法优选;在此基础上,采用竞争自适应重加权法(Competitive adaptive reweighted sampling,CARS)筛选TFA相关的重要变量,最后应用主成分回归、偏最小二乘和最小二乘支持向量机方法分别建立食用植物油中TFA含量的预测模型.研究结果表明,近红外光谱技术检测食用植物油中的TFA含量是可行的,优化后的最佳预测模型的校正集和预测集R2分别为0.992和0.989,RMSEC和RMSEP分别为0.071%和0.075%.最佳预测模型所用的变量仅26个,占全波段变量的0.854%.此外,与全波段偏最小二乘预测模型相比,其预测集R2由0.904上升为0.989,RMSEP由0.230%下降为0.075%.由此表明,模型优化非常必要,CARS能有效筛选TFA相关的重要变量,极大减少建模变量数,从而简化预测模型,并较大提高预测模型的精度和稳定性.     

Direct inverse voltammetric determination of Pb, Cu and Cd in some edible oils after solubilization

The direct determination of traces of certain heavy metals in oils is possible after treatment of the methanolic sample solution with Lumatom (tetramethylammoniumhydroxide). For the inverse voltammetric determination, a flow through cell with a mercury film electrode is used. The results for the determination of Cu and Pb in some edible oils after solubilization agree well with those obtained using wet oxidative high pressure ashing.     

Evaluation of the oxidative induction time of the ethilic castor biodiesel

Oxidative stability is very important in the quality control of oils and biodiesel. Chemical characteristics, as acid, iodine and peroxide values, show the differences among samples and can be used by industries to evaluate the oxidation degree. In relation to advanced techniques, the use of PDSC to measure the oxidative induction time is very important. These measurements were used to evaluate the properties of castor oil after refining process and consequently the biodiesel characteristics. Oxidative induction time indicated that biodiesel samples were more stable than the refined oils. The biodiesel obtained from neutralized oil had a higher stability being probably related to the acid value.     

劣质渣油性质对受热生焦趋势影响的研究

以四种劣质渣油为原料,研究组成性质对其热转化过程初期生焦特性的影响。结果表明,不同油样生焦诱导期受温度改变的影响程度可以用敏感度参数衡量,生焦诱导期越短的油样,敏感度参数越大,反应温度升高其生焦诱导期降低率越大。相同反应条件下,劣质渣油的生焦特性取决于其自身的基本性质,且各个性质对其生焦特性的影响程度不一。残炭、灰分、分子量、沥青质沉淀点和稳定性参数与其生焦诱导期相关性较强,其中,沥青质沉淀点和稳定性参数均反映的是油样胶体稳定性的突出影响。劣质渣油自身的胶体稳定性与其生焦密切相关,胶体稳定性越差的渣油,越容易生焦,油样的生焦过程是热反应过程中胶体体系逐渐被破坏的过程。     

Analysis of tinuvin 1577 polymer additive in edible oils using on-line coupled HPLC-GC

An application of automated on-line HPLC-HRGC is described for direct analysis of edible oils for migrated polymer additives. The sample preparation, separating the additive from the oil triglycerides, is carried out using normal phase HPLC. The fraction of the eluent containing the additive is automatically transferred to a HRGC where a second and final separation of the additive from minor oil components takes place. The method compares well with off-line separation methods. Migration data for Tinuvin 1577 from PET and PC polymers as well as an unspecified experimental polymer is given. The advantages and disadvantages of using different edible oils as food simulants are discussed.     

A rapid method for peroxide value determination in edible oils based on flow analysis with Fourier transform infrared spectroscopic detection

The development of an automated, rapid and highly precise method for determination of the peroxide value in edible oils based on a continuous flow system and Fourier transform infrared (FTIR) spectroscopic detection is described. The sample stream was mixed with a solvent mixture consisting of 25% (v/v) toluene in hexanol which contained triphenylphosphine (TPP). The hydroperoxides present in the sample reacted stoichiometrically with TPP to give triphenylphosphine oxide (TPPO) which has a characteristic and intense absorption band at 542 cm-1. A 10% (m/v) TPP solution in the solvent mixture and a 100 cm reaction coil were necessary for complete reaction. FTIR transmission spectra were recorded using a flow cell equipped with CsI windows having an optical pathlength of 100 microns. By using tert-butyl hydroperoxide spiked oil standards and evaluation of the band formed at 542 cm-1 a linear calibration graph covering the range 1-100 PV (peroxide value; mequiv O2 kg-1 oil) was obtained. The relative standard deviation was 0.23% (n = 11) and the throughput 24 samples h-1. The developed system was also applied to the determination of PV in olive, sunflower and corn oils, showing good agreement with the official reference method of the European Community which is based on titration using organic solvents. The results obtained clearly show that the developed method is superior to the standard wet chemical method, hence suggesting its application in routine analysis and quality control.     

顶空-气相色谱法测定食用植物油中溶剂残留的方法研究

建立顶空-气相色谱法测定食用植物油中六号溶剂残留量的分析方法.通过优化顶空进样器的平衡温度和平衡时间,使六号溶剂的主要组分完全分离,采用外标法进行定量.在2.0~100.0 mg/kg质量分数范围内,线性关系良好.在低、中、高3个加标水平下,平均回收率是98.2%~99.2%,相对标准偏差是小于2%.方法简便、准确,适合于食用植物油中六号溶剂残留量的测定.     

催化柴油中硫化物的气相-原子发射光谱分析方法及应用

 建立了催化柴油馏分中各种硫化物类型分布的气相 原子发射光谱分析方法,考察了条件对各种硫化物分离的影响,定性(或归类)了催化柴油中的130多个硫化物,计算了程序升温条件下各种硫化物的保留指数,为不同实验室的定性比较和方法的转让提供了依据。硫化物中的硫在2mg/L～1000mg/L时其质量浓度与峰面积呈较好的线性关系,相关系数达0 997。几种硫化物(苯并噻吩、4 甲基苯并噻吩、二苯并噻吩、4 甲基二苯并噻吩、4,6 二甲基二苯并噻吩)6次测定所得峰面积的相对标准偏差均小于5 0%。当信噪比(S/N)为3时,测得苯并噻吩硫的检出限为0 1mg/L。     

Influence of drying processes on oxidative stability of ethyl corn biodiesel by differential scanning calorimetry

The influence of drying processes in the biodiesel oxidation was investigated by means of the oxidative induction time obtained from differential scanning calorimetry data. For this purpose, corn biodiesel was dried by different methods including: chemical (anhydrous sodium sulfate) and thermal (induction heating, heating under vacuum and with microwave irradiation). The drying efficiency was evaluated by monitoring IR absorption in the 3,500–3,200 cm⁻¹ range and by the AOCS Bc 2-49 method. In general, the oxidative induction times increased inversely to the heating degree, except that of microwave irradiation, which was selective to water evaporation and caused low impact over the unsaturation of biodiesel. The DSC technique was shown to be a powerful tool to evaluate with high level of differentiation the influence of the drying process on the oxidative stability of biodiesel.