Determination of relative molecular weights of fluorescent components in dissolved organic matter using asymmetrical flow field-flow fractionation and parallel factor analysis

Dissolved organic matter in aquatic systems is of variable structure and composition. Asymmetrical flow field-flow fractionation coupled to UV/vis diode array and fluorescence detectors (AF4–DAD–EEM) was used to assess the size and optical properties of dissolved organic matter. The results were analyzed using parallel factor analysis (PARAFAC) and statistical fractogram deconvolution to correlate fluorescing components with molecular weight fractions. This coupling, which is shown for the first time in this work, is a powerful method capable of revealing novel information about the size properties of PARAFAC components. Tyrosine/polyphenol-like fluorescence (peak B) was significantly correlated (p < 0.05) with the smallest size group (relative molecular weight = 310 ± 10 Da), microbial humic-like and terrestrial visible humic-like fluorescence (peaks M, C, A) with the intermediate size group (1600 ± 150 Da), and terrestrial fulvic-like and tryptophan/polyphenol-like fluorescence (peaks A and T) with the largest size group (4300 ± 660 Da).     

Ultra high performance liquid chromatography-time of flight mass spectrometry for analysis of avocado fruit metabolites: method evaluation and applicability to the analysis of ripening degrees

We have developed an analytical method using UHPLC-UV/ESI-TOF MS for the comprehensive profiling of the metabolites found in the methanolic extracts of 13 different varieties of avocado at two different ripening degrees. Both chromatographic and detection parameters were optimized in order to maximize the number of compounds detected and the sensitivity. After achieving the optimum conditions, we performed a complete analytical validation of the method with respect to its linearity, sensitivity, precision, accuracy and possible matrix effects. The LODs ranged from 1.64 to 730.54 ppb (in negative polarity) for benzoic acid and chrysin, respectively, whilst they were found within the range from 0.51 to 310.23 ppb in positive polarity. The RSDs for repeatability test did not exceed 7.01% and the accuracy ranged from 97.2% to 102.0%. Our method was then applied to the analysis of real avocado samples and advanced data processing and multivariate statistical analysis (PCA, PLS-DA) were carried out to discriminate/classify the examined avocado varieties. About 200 compounds belonging to various structural classes were tentatively identified; we are certain about the identity of around 60 compounds, 20 of which have been quantified in terms of their own commercially available standard.     

Application of the Doehlert experimental design to molecularly imprinted polymers: surface response optimization of specific template recognition as a function of the type and degree of cross-linking

We propose the use of Doehlert’s experimental design, a second-order uniform shell design, for the optimization of molecularly imprinted polymers (MIPs). We have chosen a simple model system where the influence of kind and degree of cross-linking on template recognition was studied using S-propranolol as the template. We found that Doehlert’s design allows—with very few experiments—one to screen the evolution of the binding capacity of a MIP as a function the different parameters, and thus appears to be a powerful means to screen for the best composition and synthesis method for MIPs. We believe that this chemometric tool can significantly accelerate the development of new MIPs as synthetic recognition elements, particularly in the context of a given application, and will be a versatile complement or alternative to first-order designs to fit complex processes. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

A novel ion-pairing chromatographic method for the simultaneous determination of both nicarbazin components in feed additives: chemometric tools for improving the optimization and validation

The development, optimization and validation of an ion-pairing high performance liquid chromatography method for the simultaneous determination of both nicarbazin (NIC) components: 4,4′-dinitrocarbanilide (DNC) and 2-hydroxy-4,6-dimethylpyrimidine (HDP) in bulk materials and feed additives are described. An experimental design was used for the optimization of the chromatographic system. Four variables, including mobile phase composition and oven temperature, were analyzed through a central composite design exploring their contribution to analyte separation. Five responses: peak resolutions, HDP capacity factor, HDP tailing and analysis time, were modelled by using the response surface methodology and were optimized simultaneously by implementing the desirability function. The optimum conditions resulted in a mobile phase consisting of 10.0 mmol L⁻¹ of 1-heptanesulfonate, 20.0 mmol L⁻¹ of sodium acetate, pH = 3.30 buffer and acetonitrile in a gradient system at a flow rate of 1.00 mL min⁻¹. Column was an INERSTIL ODS-3 (4.6 mm × 150 mm, 5 μm particle size) at 40.0 °C. Detection was performed at 300 nm by a diode array detector. The validation results of the method indicated a high selectivity and good precision characteristics, with RSD less than 1.0% for both components, both in intra and inter-assay precision studies. Linearity was proved for a range of 32.0-50.0 μg mL⁻¹ of NIC in sample solution. The recovery, studied at three different fortification levels, varied from 98.0 to 101.4 for HDP and from 99.1 to 100.2 for DNC. The applicability of the method was demonstrated by determining DNC and HDP content in raw materials and commercial formulations used for coccidiosis prevention. Assays results on real samples showed that considerable differences in molecular ratio DNC:HDP exist among them.     

Liquid chromatography: a tool for the analysis of metal species

An overview is presented of classic and more recent applications of liquid chromatography for the analysis of metal species. The different approaches involving ion-exchange, ion-pair, and chelation separation mechanisms are discussed as well as the new philosophy of simply removing interferents before specific detections of metal ions (alkali and alakaline earths, rare earths, heavy and transition metals). New more selective materials enabling difficult separations and studies on multimodal or hyphenated techniques for metal speciation (e.g. arsenic and chromium) are considered.     

Design and evaluation of a mixed-phase capillary column for the gas chromatographic separation of the volatile components of cheese

Summary A mixed-phase capillary GC column has been designed for the separation of the compounds commonly present in the volatile fraction of cheeses. The design includes the calculation of the optimum phase concentration and the operating conditions. The evaluation of the resulting column indicates that its performance in the qualitative and quantitative analysis of cheese volatile compounds is better than those of other columns coated with a single stationary phase.     

Development of the custom polymeric materials specific for aflatoxin B1 and ochratoxin A for application with the ToxiQuant T1 sensor tool

Two polymers were computationally designed with affinity to two of the most abundant mycotoxins aflatoxin B1 (AFB1) and ochratoxin A (OTA) for application in the ToxiQuant T1 System. The principle of quantification of AFB1 and OTA using the ToxiQuant T1 instrument comprised of a fluorimetric analysis of mycotoxins adsorbed on the polymer upon exposure to UV light. High affinity of the developed resins allowed the adsorption of both toxins as discrete bands on the top of the cartridge with detection limit as low as 1 ng quantity of mycotoxins.     

High‐performance liquid chromatography with photodiode array detection and chemometrics method for the analysis of multiple components in the traditional Chinese medicine Shuanghuanglian oral liquid

Shuanghuanlian oral liquid, a traditional Chinese medicine preparation, is a mixture of three herbs (Flos Lonicerae, Radix Scutellariae and Fructus Forsythiae). In this study, the quantitative analysis of three main active compounds, chlorogenic acid, forsythin and baicalin in samples from different manufacturers was performed rapidly by high‐performance liquid chromatography coupled with photodiode array detection followed by Contour Projection coupled to stepwise regression treatment of the obtained three‐dimensional spectra in which the partial overlap between adjacent target components existed. The method was validated for linearity (R>0.9940), precision (RSD<1.25%), recovery (92.20–102.50%), limit of detection (0.01–0.02 μg/mL) and limit of quantification (0.03–0.07 μg/mL). The results indicated that the combination of the three‐dimensional spectra of traditional Chinese medicine and Contour Projection‐stepwise regression offered an accurate, simple, low‐cost and eco‐friendly way for the rapid quantitative analysis of Shuanghuanlian oral liquid samples.     

A mathematical model of the logical structure of chemistry. A bridge between theoretical and experimental chemistry and a general tool for computer-assisted molecular design

Summary A mathematical model of the logical structure of chemistry is suggested. The model is based on the phenomenon of convertibility between chemical species which is expressed by the so-called convertibility function . In the center of the model there is the potential energy (hyper)surface, PES. A heuristic modification of the general convertibility function is presented. Several algorithms have been developed for an analysis of PES which is described by paths, and for heuristic obtaining of PES paths. The notion ofK-barrier of conformational PES is introduced as well as an algorithm for its computation.     

X-ray structure and in silico molecular docking of a natural phaeosphaeride A derivative for targets associated with kinase cascades

The structure of the lead compound, a natural phaeospha- eride A derivative AV-6, (2S,3R,4R)-3-hydroxy-6-methoxy-3-methyl-7-methylene-2-pentyl-4-pyrrolidin-1-yl-3,4,6,7-tetrahydropyrano[2,3-c]pyrrol-5(2H)-one, was unambiguously determined by X-ray crystallography. When modeling in silico the interaction of AV-6 with targets in kinase cascades, high values of the binding energy (below –9 kcal mol^-1) for some protein targets were shown. Our results identified that MAPK11, MAPK12 and AKT1 could be targets of AV-6.     

Proficiency testing as a tool for implementing internal quality control: the case of ochratoxin A in cocoa powder

This paper describes the interlaboratory study aimed at assessing the performance of 18 laboratories (14 national and 4 European) for Ochratoxin A (OTA) determination in cocoa powder samples. The study was tested at three levels of OTA covering the range in which presumably European regulatory limits could fall in the near future. For the extraction step, almost all laboratories used an aqueous solution of sodium hydrogen carbonate with the exception of one laboratory using dichloromethane consistently with the ELISA procedure adopted in the study. The clean-up step was performed by utilizing the immunoaffinity columns by the two main manufacturers (R-Biopharm Rhone and VICAM) and for the quantitative analysis, HPLC was used by all the participants except one using ELISA. From the output of the study, it can be concluded that at low level (0.19 μg/kg) 10 out of 18 (56%), at medium level (0.45 μg/kg) 11 out of 18 (61%), and at high level (1.45 μg/kg) 12 out of 18 (67%) results fell within the satisfactory ranges. This interlaboratory study provides an estimate of the performance of national and European laboratories involved in OTA determination in cocoa powder samples, which sounds extremely valuable in view of potential future legislation by the European Commission.     

Extract–filter–shoot liquid chromatography with mass spectrometry for the analysis of vitamin D2 in a powdered supplement capsule and standard reference material 3280

An “extract–filter—shoot” method for the analysis of vitamin D₂, ergocalciferol, in a dry powdered dietary supplement capsule containing rice flour excipient and in a National Institute of Standards and Technology standard reference material 3280 is reported. Quantification of vitamin D₂ was done by atmospheric pressure chemical ionization mass spectrometry using selected ion monitoring, two transitions of selected reaction monitoring, and extracted ion chromatograms from full scans. UV detection was used for the quantification of Vitamin D₂ in the dry powder capsule, whereas interfering species rendered UV detection unreliable for standard reference material 3280. Average values for standard reference material 3280 ranged from 8.27 ± 0.58 to 8.33 ± 0.57 μg/g using internal standard calibration and response factor approaches, compared to the previous National Institute of Standards and Technology internal value for vitamin D₂ of 8.78 ± 0.11 μg/g, and the recently updated reference value of 8.6 ± 2.6 μg/g. The powdered supplement capsule was found to contain 28.19 ± 0.35 to 28.67 ± 0.90 μg/capsule for a capsule labeled to contain 25.00 μg. The triacylglycerol composition of the rice flour excipient in the powdered supplement capsule determined by atmospheric pressure chemical ionization mass spectrometry is also reported.     

Coupling micro-LC and capillary GC as a powerful tool for the analysis of complex mixtures

A multidimensional chromatography system with a packed fused silica Micro-LC column connected on-line with capillary gas chromatography is presented. The Micro-LC column is used for group separation. Whole peaks are injected into the capillary GC column via an on-column injector. The reproducibility of the proposed transfer system for polyaromatic hydrocarbons is 3% to 7% relative standard deviation. The potential of this on-line Micro-LC-GC system is demonstrated by the analyses of PAH's and of a complex light gasoline fraction.     

Separation of durum wheat proteins by ultrathin-layer isoelectric focusing: a new tool for the characterization and quantification of low molecular weight glutenins

An isoelectric focusing method capable of resolving all groups of storage protein of the wheat seed, including the most basic low molecular weight glutenin (LMWG), was developed. Ultrathin polyacrylamide gels were used after drying and rehydration with 8 M urea, 50 mM DTE and 2.4% carrier ampholytes (pH 4-9). Densitometric scanning of the isoelectric focusing gels permitted a more accurate and specific quantitation of LMWG components among various cultivars than patterns based on sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The two main genetic types (i.e. 'gamma-42' and 'gamma-45') of durum wheats were separated on the basis of the proportion in LMWG in storage proteins, but no significant difference was found within these groups. Advantages of the system as regards reliability, high resolution, ability to abolish protein oxidation and preventing reaggregation of LMWG were also discussed.