A sensitive resonance light scattering spectrometry of trace Hg with sulfur ion modified gold nanoparticles

A new resonance light scattering (RLS) spectrometric method for mercury ions (Hg²⁺) in aqueous solutions with sulfur ion (S²⁻) modified gold nanoparticles (Au-NPs-S) has been developed in this contribution. It was found that S²⁻ at the surface of Au-NPs resulting from the surface modification can interact with Hg²⁺ to form very stable S-Hg-S bonds when Hg²⁺ concentration is lower than that of S²⁻, resulting in the aggregation of Au-NPs-S and causing enhanced RLS signals. The enhanced RLS intensities (ΔI_RLS) characterized at 392 nm were found to be proportional to the concentration of Hg²⁺ in the range of 0.025-0.25 μmol L⁻¹ with a detection limit (3σ) of 0.013 μmol L⁻¹. Our results showed that this approach has excellent selectivity for Hg²⁺ over other substances in aqueous solutions.     

A dual-wavelength resonance light scattering ratiometry of biopolymer by its electrostatic interaction with surfactant

A dual-wavelength resonance lighting scattering (DW-RLS) ratiometry is developed to detect anion biopolymer based on their bindings with cation surfactant. Using the interaction of Hyamine 1622 (HM) with fish sperm DNA (fsDNA) as an example, a dual-wavelength resonance light scattering (DW-RLS) ratiometric method of DNA was constructed. In Britton-Robinson buffer controlled medium, fish sperm DNA (fsDNA) could interact with Hyamine 1622 (HM), displaying significantly enhanced RLS signals. By measuring the RLS signals characterized at 300.0 nm (I_300.0) and the RLS intensity ratio (I_276.0/I_294.0), respectively, fsDNA over a wide dynamic range of content could be detected. Typically, when HM concentration is kept at 6.0 × 10⁻⁵ mol l⁻¹, using I_300.0 could detect fsDNA over the range of 50-2000 ng ml⁻¹ with the limit of 3.0 ng ml⁻¹, while using I_276.0/I_294.0 could detect fsDNA over the range of 0.5-2500 ng ml⁻¹ with the limit of 0.05 ng ml⁻¹. Thus the latter so-called DW-RLS ratiometry is obviously superior to the former one. Based on the measurements of I_300.0 and I_276.0/I_294.0 data, a Scatchard plot concerning the interaction between HM and fsDNA could be constructed and thus the binding number (n) and binding constant (K) could be available with the values of 13.5 and 1.35 × 10⁵ mol⁻¹ l, and 11.9 and 1.65 × 10⁵ mol⁻¹ l, respectively.     

Localized surface plasmon resonance sensing detection of glucose in the serum samples of diabetes sufferers based on the redox reaction of chlorauric acid

In this paper, the formation of gold nanoparticles (Au NPs) as a result of the thermo-active redox reaction of chlorauric acid (HAuCl₄) and glucose in alkaline medium was identified by measuring the plasmon resonance absorption, localized surface plasmon resonance (LSPR), and transmission electron microscopy (TEM) images, for the formation of Au NPs displays characteristic plasmon resonance absorption bands and corresponding LSPR signals. It was found that the resulted LSPR signals could be easily detected with a common spectrofluorometer. With increasing glucose concentration, the LSPR intensity displays linear response with the glucose content over the range from 2.0 to 250.0 μmol l⁻¹. Thus, a novel assay of glucose was established with the limits of determination (3σ) being 0.21 μmol l⁻¹, and the detection of glucose could be made easily in the serum samples of diabetes sufferers. Mechanism investigations showed that the activation energy and molar ratio of the reaction were 34.8 kJ mol⁻¹ and 3:2, respectively.     

Enhanced surface plasmon resonance by Au nanoparticles immobilized on a dielectric SiO2 layer on a gold surface

This paper introduces strategies for enhancement of a surface plasmon resonance (SPR) signal by adopting colloidal gold nanoparticles (AuNPs) and a SiO₂ layer on a gold surface. AuNPs on SiO₂ on a gold surface were compared with an unmodified gold surface and a SiO₂ layer on a gold surface with no AuNPs attached. The modified surfaces showed significant changes in SPR signal when biomolecules were attached to the surface as compared with an unmodified gold surface. The detection limit of AuNPs immobilized on a SPR chip was 0.1 ng mL⁻¹ for the prostate-specific antigen (PSA), a cancer marker, as measured with a spectrophotometer. Considering that the conventional ELISA method can detect ∼10 ng mL⁻¹ of PSA, the strategy described here is much more sensitive (∼100 fold). The enhanced shift of the absorption curve resulted from the coupling of the surface and particle plasmons by the SiO₂ layer and the AuNPs on the gold surface.     

Surface-enhanced Raman scattering for perchlorate detection using cystamine-modified gold nanoparticles

Perchlorate (ClO₄⁻) has recently emerged as a widespread environmental contaminant found in groundwater and surface water, and there is a great need for rapid detection and monitoring of this contaminant. This study presents a new technique using cystamine-modified gold nanoparticles as a substrate for surface-enhanced Raman scattering (SERS) detection of perchlorate at low concentrations. A detection limit of 5 × 10⁻⁶ M (0.5 mg/L) has been achieved using this method without sample preconcentration. This result was attributed to a strong plasmon enhancement by gold metal surfaces and the electrostatic attraction of ClO₄⁻ onto positively charged, cystamine-modified gold nanoparticles at a low pH. The methodology also was found to be reproducible, quantitative, and not susceptible to significant interference from the presence of anions such as sulfate, phosphate, nitrate and chloride at concentrations <1 mM, making it potentially suitable for rapid screening and routine analysis of perchlorate in environmental samples.     

A quantitative method for determination of Co(II) based on the inner filter effect of reagents on the Raman scattering signals of water

It is known that Raman scattering signals are one of main interference sources leading up to determination errors in spectrofluorometry, and thus the signals can be easily detected with a common spectrofluorometer. In this contribution, we propose a quantitative method based on the inner filter effect (IFE) of reagents on the Raman scattering signals of solvent by taking the complexation of divalent cobalt ion with 4-[(5-chloro-2-pyridyl)azo]-1,3-diaminobenzene (5-Cl-PADAB) as a model system. By adjusting the excitation wavelength of the spectrofluorometer, we could easily detect the Raman scattering signals of water at 424 nm where the maximum absorption of 5-Cl-PADAB reagent is located. In a solution of 5-Cl-PADAB, the Raman scattering signals of water are decreased owing to the IFE of 5-Cl-PADAB. If Co(II), which could form the binary complex of Co(II)/5-Cl-PADAB and consumes the 5-Cl-PADAB reagent, is present in such a case for a given amount of 5-Cl-PADAB solution, recovered Raman scattering signals could be observed and measured with a spectrofluorometer. It was found that the intensity of the enhanced Raman scattering signals is proportional to the Co(II) concentration over the range from 2.0 × 10⁻⁷ mol L⁻¹ to 1.0 × 10⁻⁵ mol L⁻¹, and the detection limit could reach 1.2 × 10⁻⁷ mol L⁻¹. With that, Co(II) in samples could be detected with R.S.D. values lower than 2.6% and recoveries over the range of 97.2-104.7%.     

Molecularly imprinted polymer coated magnetite nanoparticles as an efficient mefenamic acid resonance light scattering nanosensor

In this work, a mefenamic acid (MFA) nanosensor was synthesized by the aid of molecularly imprinted polymer (MIP) technique. MIP layer was coated on magnetite nanoparticles as magnetic nano-carriers. Synthesized nanoparticles were characterized using various measurements techniques. Light scattering properties of the synthesized nanoparticles in the presence or absence of MFA have been selected as the detection signal. In this regard, resonance light scattering has been used as the detection method. Various factors that can potentially affect light scattering efficiency (i.e., pH, ultrasonication time and nanoparticle dosage) were optimized using “one-at-a-time” method. A linear dynamic range was established from 100.0 to 2000.0 ng L⁻¹ of MFA and the limit of detection was found to be 50.0 ng L⁻¹ using the proposed method.     

A new resonance scattering spectral method for the determination of trace amounts of iodate with rhodamine 6G

Under the conditions of 0.04 mol L⁻¹ HCl-8.0 × 10⁻⁴ mol L⁻¹ KI, there is a fluorescence peak at 540 nm and a synchronous fluorescence peak at 540 nm for rhodamine 6G (RhG). When there is IO₃⁻, it reacts with exceed I⁻ to form I₃⁻. And I₃⁻ and RhG combine into ion association particles. The particles exhibit three resonance scattering peaks at 320, 400 and 595 nm. And there is fluorescence quenching at 540 nm. Iodine concentration is proportional to the intensity of the resonance scattering intensity at 400 nm in the range of 1.0-20 × 10⁻⁷ mol L⁻¹. And a new resonance scattering spectral (RSS) method has been described for the determination of IO₃⁻ in salt samples. The spectral results have been verified that the formation of (RhG-I₃)_n association particles and solid-liquid interfaces are the main factor that cause the fluorescence quenching and resonance scattering effects.     

Ferric nanoparticle-based resonance light scattering determination of DNA at nanogram levels

A novel assay of DNA has been proposed by using ferric nanoparticles as probes coupled with resonance light scattering (RLS) detection. At pH 7.40, the RLS intensity of ferric nanoparticles can be greatly enhanced by the aggregation of positively charged ferric nanoparticles through electrostatic interaction with negatively charged DNA. The enhanced intensity of RLS at 452 nm is proportional to the concentration of DNA in the range of 0.01-0.8 μg ml⁻¹ for calf thymus and salmon sperm DNA and in the range of 0.005-0.3 μg ml⁻¹ for E. coli K12 genomic DNA. Detection limits are 3.6 ng ml⁻¹ for calf thymus DNA, 4.4 ng ml⁻¹ for salmon sperm DNA, and 1.9 ng ml⁻¹ for E. coli K12 genomic DNA, respectively. Compared with the chromophores previously used in RLS assay, the ferric nanoparticles have offered several advantages in easy preparation, good photostability and high sensitivity without being modified or functionalized.     

Application of surface plasmon resonance spectroscopy for adsorption studies of different types of components on poly(dimethylsiloxane)

Surface plasmon resonance (SPR) spectroscopy is utilized to study in real-time and, by label-free means, the reversible and quasi-irreversible adsorption of small ionic or neutral molecules, pharmaceuticals, and proteins on poly(dimethylsiloxane) (PDMS) surfaces. The SPR sensor is covered with 0.2% (w/v) PDMS in octane. During the timescale of a typical lab-on-a-chip analysis or an electrophoretic separation, it was found that small neutral components containing a hydrophobic part do not adsorb or absorb onto PDMS, while larger, water-soluble polymer-like materials like proteins generally irreversibly adsorb to PDMS. The technique can be used to monitor the kinetics of adsorption and desorption of the molecules. For the non-specific adsorption of teicoplanin to PDMS, a Langmuir-like adsorption isotherm was obtained (K_d = 32 ± 2 μmol L⁻¹).     

Gold nanoparticles-based catalysis for detection of S-nitrosothiols in blood serum

Accumulating evidence suggests that S-nitrosothiols (RSNOs) play key roles in human health and disease. To clarify their physiological functions and roles in diseases, it is necessary to promote some new techniques for quantifying RSNOs in blood and other biological fluids. Here, a new method using gold nanoparticle catalysts has been introduced for quantitative evaluation of RSNOs in blood serum. The assay involves degrading RSNOs using gold nanoparticles and detecting nitric oxide (NO) released with NO-selective electrodes. The approach displays very high sensitivity for RSNOs with a low detection limit in the picomolar concentration range (5.08 × 10⁻¹¹ mol L⁻¹, S/N = 3) and is free from interference of some endogenous substances such as NO₂⁻ and NO₃⁻ co-existing in blood serum. A linear function of concentration in the range of (5.0-1000.0) × 10⁻⁹ mol L⁻¹ has been observed with a correlation coefficient of 0.9976. The level of RSNOs in blood serum was successfully determined using the described method above. In addition, a dose-dependent effect of gold nanoparticles on the sensitivity for RSNOs detection is revealed, and thereby the approach is potentially useful to evaluate RSNOs levels in various biological fluids via varying gold nanoparticles concentration.     

Multi-walled carbon nanotubes based catalyst plasmon resonance light scattering analysis of tetracycline hydrochloride

It was found that multi-walled carbon nanotubes (MWNTs) could catalyze the redox reaction between chlorauric acid (HAuCl4) and reductive drugs such as tetracycline hydrochloride (TC), producing gold nanoparticles (Au NPs). By measuring the plasmon resonance light scattering (PRLS) signals of the resulting Au NPs, tetracycline hydrochloride can be detected simply and rapidly with a linear range of 4―26 μmol/L, a correlated coefficient (r ) of 0.9955, and a limit of detection (3σ) of 6.0 nmol/L. This method has been successfully applied to the detection of tetracycline hydrochloride tablets in clinic with the recovery of 101.9% and that of fresh urine samples with the recovery of 98.3%―102.0%.     

Hydrogen-bonding recognition-induced aggregation of gold nanoparticles for the determination of the migration of melamine monomers using dynamic light scattering

The migration of melamine monomers from food contact materials has aroused particular attention since the 2008 melamine-tainted milk scandal in China. However, the determination of melamine monomer’s migratory quantity (MMMQ) has remained an open question because of the complex sample pretreatment and the low sensitivity. Based on the hydrogen bonding interaction between DNA thymine and melamine, this paper described a simple and rapid method focusing on the measurement of MMMQ from melamine tableware by gold nanoparticles (GNPs) and dynamic light scattering (DLS). With the presence of probe DNA (p-DNA), the GNPs were stable in NaCl solution (0.06 M), whereas they became aggregated when the p-DNA hybridized with melamine. The change in the hydrodynamic diameter of GNPs could be detected by DLS technology. Under the optimal conditions, the average diameter increased linearly with the concentration of melamine over the range from 5.0 to 320.0 μg L⁻¹, and showed a detection limit of 2.0 μg  L⁻¹ (3σ/slope). The MMMQ was investigated within a range from 6.00 × 10⁻⁴ to 2.58 × 10⁻¹ mg dm⁻² (n ≥ 3) in four different food simulants at different temperatures and time points. The results suggest that the DLS method has great potential in the analysis of the migration of melamine monomers.     

Study on the interaction of nucleic acids with silver nanoparticles—Al(III) by resonance light scattering technique and its analytical application

It is found that Al(III) can further enhance the intensity of resonance light scattering (RLS) of the silver nanoparticles (AgNPs) and nucleic acids system. Based on this, a novel method of determination of nucleic acids is proposed in this paper. Under optimum conditions, there are linear relationships between the enhancing extent of RLS and the concentration of nucleic acids in the range of 1.0 × 10⁻⁹-1.0 × 10⁻⁷ g mL⁻¹, 1.0 × 10⁻⁷-2.0 × 10⁻⁶ g mL⁻¹ for fish sperm DNA (fsDNA), 1.0 × 10⁻⁹-7.0 × 10⁻⁸ g mL⁻¹ for calf thymus DNA (ctDNA) and 1.0 × 10⁻⁹-1.0 × 10⁻⁷ g mL⁻¹ for yeast RNA (yRNA). The detection limits (S/N = 3) of fsDNA, ctDNA and yRNA are 4.1 × 10⁻¹⁰ g mL⁻¹, 4.0 × 10⁻¹⁰ g mL⁻¹ and 4.5 × 10⁻¹⁰ g mL⁻¹, respectively. The studies indicate that the RLS enhancement effect should be ascribed to the formation of AgNPs-Al(III)-DNA aggregations through electrostatic attraction and adsorption bridging action of Al(III). And the sensitivity and stability of the AgNPs-fsDNA system could be enhanced by Al(III).     

Localized surface plasmon resonance sensor for simultaneous kinetic determination of peroxyacetic acid and hydrogen peroxide

A new sensor for simultaneous determination of peroxyacetic acid and hydrogen peroxide using silver nanoparticles (Ag-NPs) as a chromogenic reagent is introduced. The silver nanoparticles have the catalytic ability for the decomposition of peroxyacetic acid and hydrogen peroxide; then the decomposition of them induces the degradation of silver nanoparticles. Hence, a remarkable change in the localized surface plasmon resonance absorbance strength could be observed. Spectra-kinetic approach and artificial neural network was applied for the simultaneous determination of peroxyacetic acid and hydrogen peroxide. Linear calibration graphs were obtained in the concentration range of (8.20 × 10⁻⁵ to 2.00 × 10⁻³ mol L⁻¹) for peroxyacetic acid and (2.00 × 10⁻⁵ to 4.80 × 10⁻³ mol L⁻¹) for hydrogen peroxide. The analytical performance of this sensor has been evaluated for the detection of simultaneous determination of peroxyacetic acid and hydrogen peroxide in real samples.     

Development of a gold nanoparticles based chemiluminescence imaging assay and its application

In this paper, a novel gold nanoparticles based protein immobilization method was designed. Biocomposites of gold nanoparticles and proteins were successfully coated on poly(methyl methacrylate) (PMMA) plates and polystyrene microtiter plates. The proteins could be immobilized on solid materials with high density and better bioactivity. Based on above design, chemiluminescence (CL) imaging assay for determination of H₂O₂ and recombinant human interleukin-6 (rHu IL-6) was developed. The linear range and the loading capability were greatly improved when compared with imaging assay performed with direct proteins immobilization. Under the selected experimental conditions, a linear relationship was obtained between the CL intensity and the concentration of H₂O₂ in the range of 1.0 × 10⁻⁶ to 1.0 × 10⁻⁴ mol L⁻¹, and rHu IL-6 in the range of 2.0-312.0 pg mL⁻¹. The detection limits were 2 × 10⁻⁷ mol L⁻¹ (3σ) for H₂O₂ and 0.5 pg mL⁻¹ for rHu IL-6 with relative standard deviation of 3.8% for 3.0 × 10⁻⁵ mol L⁻¹ H₂O₂, and 4.4% for 39.0 pg mL⁻¹ rHu IL-6. This method has been applied to the determination of rHu IL-6 in human serum with satisfactory results.     

Determination of lead in environmental water by a backward light scattering technique

An optical fiber assembly developed in our laboratory, which is based on detecting backward light scattering (BLS) signals, is now applied to detect the lead content in environmental samples. Due to effectively eliminating the interference of reflected light, this BLS signals based detection assembly can be used to determine analyte directly. In HAc-NaAc buffer medium (pH 4.8), the interaction of lead and sodium tetraphenylboron (TPB) in the presence of polyethylene glycol (PEG) yields large particles of ternary complex, resulting in strong enhanced backward light scattering (BLS) signals characterized at 371 nm. By measuring the BLS signals with the homemade optical fiber assembly coupled with a common spectrofluorometer, we found that the enhanced BLS intensity is proportional to lead content over the range of 0.03-1.0 μg ml⁻¹ with the limit of determination (LOD) of 2.6 ng ml⁻¹. Three artificial water samples containing various coexistent substances were detected with the recovery of 90.1-107.5%. Standard addition method was used to detect the lead content in drink tap water, and found that the lead is hardly to detect due to too low content. Prior enrichment should be made in order to detect river water samples, and it was found that the content of lead in Jialing River at Bebei Dock is about 14 ng ml⁻¹, identical to the results using inductively coupled plasma atomic emission spectrometry (ICP-AES).     

Backscattering light detection of nucleic acids with tetraphenylporphyrin-Al(III)-nucleic acids at liquid/liquid interface

A backscattering light (BSL) detection assembly is constructed and applied to the determination of nucleic acids with high sensitivity and selectivity based on the measurements of BSL signals at water/tetrachloromethane (H₂O/CCl₄) interface. In aqueous medium of pH 3, the binary complex of of Al(III)-DNAs could be formed by the interaction of Al(III) with the phosphate group of DNAs, which then could interact with tetraphenylporphyrin (TPP) in tetrachloromethane through liquid/liquid interaction, forming a ternary complex of TPP-Al(III)-DNAs at the interface. It was observed that greatly enhanced BSL signals occurred with maximum peak at 469 nm when the ternary complex of TPP-Al(III)-DNAs were absorbed to the liquid/liquid interface. The enhanced backscattering light intensity (I_BSL) is in proportion to the concentration of calf thymus DNA (ctDNA) and fish sperm DNA (fsDNA) in the range of 0.6-1200 ng ml⁻¹ and 1.1-1200 ng ml⁻¹, respectively. The limits of determination (3σ) are 60 pg ml⁻¹ and 110 pg ml⁻¹, correspondingly. Artificial samples with highly interference backgrounds were determined with the recovery ranging from 94.5 to 106.7%, and relative standard deviation (R.S.D.) less than 2.40%.     

Study of the interaction of Azur B with DNA and the determination of DNA based on resonance light scattering measurements

Based on the measurements of molecular absorption and resonance light scattering (RLS), the aggregation of Azur B (AB) was in a medium of pH ranging from 1.98 to 2.56 and ionic strength <0.12 M. The presence of double stranded DNA prompts the aggregation, resulting in enhanced RLS signals. Linear relationships were achieved between the enhanced RLS intensity at 359.7 nm and DNA concentration in the range of 0-4.5 μg ml⁻¹ for both calf thymus DNA (ctDNA) and fish sperm DNA (fsDNA) if 3.0×10⁻⁵ M AB was employed. The 3σ limits of detection were 9.3 and 8.9 ng ml⁻¹ for ctDNA and fsDNA, respectively. Five synthetic samples were analysed satisfactorily.     

A strategy for improving the sensitivity of molecularly imprinted electrochemical sensors based on catalytic copper deposition

A novel method to improve the sensitivity of molecularly imprinted polymer sensors was developed. Oxytetracycline (OTC), which was selected as the template molecule, was first rebound to the imprinted cavities. Gold nanoparticles were then labeled with the amino groups of OTC molecules via electrostatic adsorption and non-covalent interactions. Copper ions were catalytically reduced by the gold nanoparticles, and copper was deposited onto the electrode. The deposited copper was electrochemically dissolved, and its oxidative currents were recorded by differential pulse voltammetry (DPV). OTC could be determined indirectly within the concentration range of 3.0 × 10⁻¹⁰ to 1.5 × 10⁻⁷ mol L⁻¹ with a detection limit of 6.8 × 10⁻¹¹ mol L⁻¹.