Speciation analysis of selected metals and determination of their total contents in paired serum and cerebrospinal fluid samples: An approach to investigate the permeability of the human blood-cerebrospinal fluid-barrier

Neurodegenerative diseases like Alzheimer's disease and Parkinson's disease are gaining increasing relevance in our aging society. However, the complex multifactorial mechanisms of these diseases are not sufficiently understood yet. Several studies indicate that metal ions play an important role in the promotion of these diseases. Consequently, the transport pathways of metals and their species to the brain are of special interest. Following oral or inhalative uptake metals are absorbed and distributed via the blood stream in the body. Transport into the brain requires crossing of the neural barriers.Our study focuses on the investigation of the permeability of the blood-cerebrospinal fluid (CSF)-barrier for selected metals (Mn, Fe, Cu, Zn, Mg and Ca). For the first time paired human serum and CSF samples obtained from a neurological department were characterised for total metal concentrations and metal species. For CSF few data are available in the literature on total metal contents and applications of element speciation analysis in CSF samples are rare. In our study mean CSF/serum ratios (n = 29) were 0.7 for Mn, 0.02 for Fe, 0.02 for Cu, 0.03 for Zn, 1.3 for Mg and 0.5 for Ca. Size exclusion chromatography (SEC) online with inductively coupled plasma mass spectrometry was further developed for the size characterisation of the metal species in CSF and serum with limits of detection of 0.4 μg L⁻¹ for Fe, 0.01 μg L⁻¹ for Mn, 0.2 μg L⁻¹ for Cu, 0.2 μg L⁻¹ for Zn, 0.6 μg L⁻¹ for Mg and 3.8 μg L⁻¹ for Ca in the eluate from the HPLC column. Apart from Mn the application of this technique has not been published for metal speciation in CSF, yet. In the case of some Mn species it turned out that methanol, which was contained in the mobile phase of a SEC method previously published from our group on qualitative characterisation of Mn species, was interfering with the quantification. The modified method developed in this work (with NaCl but without methanol in the mobile phase; use of internal standard) allowed reliable quantification. The results clearly indicate changes in the metal species pattern due to different permeation behaviour at the blood-CSF-barrier. As part of the method validation the relative stability of complexes of albumin, transferrin and citrate with Mn, Fe, Cu and Zn was investigated.     

Distribution of heavy metal concentrations in surface sediments in Dubai Creeks, United Arab Emirates

Dubai is developing rapidly and many developmental activities are concentrated around its Creek. The present study reports the lateral distribution of heavy metals and compares it with local historical record of heavy metal concentrations. For this purpose surface sediment samples were collected and analyzed for metal contents, total organic carbon content (TOC), mineralogy and grain size. The percentages of the different grain size fraction of the collected sediments were as follow 65% for sand size, 15% for silt size fraction, and the rest accounted for clay size fraction. The microscopic analyses indicate that the sediment composed mainly from carbonate and quartz with traces of rock fragments. Such mineral composition is not believed to be a potential source of heavy metal. The study found that the average recorded heavy metal concentrations in the collected sediment samples were 87, 96, 127, 38.5, and 279 ppm for Cr, Cu, Ni, Pb, and Zn, respectively. Those values were slightly higher than metal concentrations recoded in 2001 with 1.22 (Cr), 2.5 (Cu), 2.87 (Ni), 0.69 (Pb), and 2.1 (Zn) folds. However, in 2001 and 2003 the measured metal contents, along the creek, were lower than those of the average earth crust. Along the Creek most metals recorded the highest concentrations in the upper reach of the Creek. The distribution of the measured heavy metals was not affected significantly with the TOC values. The present study also documented obvious related point sources of pollution.     

Comparison of particle size and flow rate optimization for chromatography using one-monomer molecularly imprinted polymers versus traditional non-covalent molecularly imprinted polymers

The dependence of enantio-selective chromatographic performance on particle size, as measured by separation factor, was investigated for one-monomer molecularly imprinted polymers (OMNiMIPs) compared to traditionally formed EGDMA/MAA molecularly imprinted polymers (MIPs). Five particle size ranges were compared (<20 μm, 20-25 μm, 25-38 μm, 38-45 μm, and 45-63 μm), revealing that the particle sizes above 25 μm provided the highest separation factor, and thus the best enantiomer separation, for both imprinted polymers. Other chromatographic parameters such as the number of theoretical plates and resolution exhibited only minor changes for the OMNiMIPs as the particle size changed, except for particles 20 μm and below. However, the number of theoretical plates and resolution for EGDMA/MAA are higher for particles in the 20-25 μm range. Thus, chromatographic factors for the EGDMA/MAA polymers are better in this range, despite better enantioselectivity for particle sizes above 25 μm. In contrast, OMNiMIPs generally show the most favorable performance for particle sizes in the 38-45 μm range. It was also found that decreasing flow rate resulted in improved enantioselectivity for both MIPs for all particle sizes.     

贵阳污灌区菜地土壤团聚体中有机碳和重金属的含量特征及相关性分析

以贵阳某污灌区菜地土壤为研究对象,分别采用微波消解-电感耦合等离子体质谱(ICP-MS)法和水合热重铬酸钾氧化分光光度法分析不同粒径土壤团聚体中重金属和有机碳的含量特征,并对有机碳和重金属的相关性进行分析。结果表明,以2mm粒径团聚体的含量为最高,约占75%。Cu、Zn、Cd和Pb在0.25～0.5mm粒径团聚体中含量最高,Cr在5～8mm粒径团聚体中含量最高,As在不同粒径团聚体中的含量变化不大,重金属含量随土层深度增大而减小。土壤重金属富集因子表现为CuPbCdZnCrAs,Cu、Zn、Cd和Pb在0.25～0.5mm粒径团聚体中分布因子最高,而在5～8mm粒径团聚体中重金属的质量负载因子最大。土壤有机碳含量随团聚体粒径的增大表现为先增大后减小,不同粒径团聚体中Cu、Cd、Pb和As含量与有机碳含量均呈显著正相关(p0.05)。污灌区菜地土壤Cr、As在5～8mm粒径团聚体中富集现象显著,Cu、Zn、Cd、Pb在0.25～0.5mm粒径团聚体中均表现出显著的富集特征。6种重金属在5～8mm粒径团聚体中的质量负载因子均为最高,表明6种重金属在5～8mm粒径团聚体中的贡献最大。     

Combining multivariate analysis and geochemical approaches for assessing heavy metal level in sediments from Sudanese harbors along the Red Sea coast

Multivariate statistical analysis and geochemical approaches were exploited for the assessment of the level of some heavy metals (Mn, Fe, Ni, Cu, Zn and Pb) in sediments from Sudanese harbors along the Red Sea coast. Principal component analysis, as a multivariate statistical analysis approach, was applied to identify contribution sources by heavy metals in sediments. While a single source (crustal) was recorded in the bulk sediments and coarse sediment grains (grain-size 1000-500 µm), two sources (crustal and anthropogenic) were recorded in fine sediment grains (grain-size < 500 µm). Furthermore, enrichment factor (EF), as a geochemical approach, appointed polluted sites by heavy metals in the study area. Based upon a previous study addressed the interpretation of EF values, minor to moderate anthropogenic enrichment were recorded in sediments from some sites in the study area. The main anthropogenic activities that believed to be the major sources of pollution by heavy metals in the study area are discharges from oil refinery, industry, shipping activity and domestic waste. Hierarchical cluster analysis (HCA), as another multivariate statistical analysis approach, was applied for the concentrations of heavy metals in bulk sediments to group sediments according to their mineralogical composition. The output of HCA is that sediments from the Port-Sudan harbor can be divided mainly into three areas — east, west and south. For the Sawakin harbor, no apparent trend for the spatial distribution of heavy metals in sediments was recorded.     

Spatial distribution and accumulation of heavy metals in tidal flat sediments of Shanghai coastal zone

Surface and core sediments from the high, middle and low tidal flats of Shanghai coastal zone were analyzed for heavy metal (e.g. Cu, Pb, Zn, Cr, Cd, Fe, Mn) concentrations. Besides Cd, the concentrations of Cu, Zn, Cr and Pb are 2–5 times higher than their background values and show serious pollution trend due to the direct discharge of industrial and municipal sewage along the Shanghai tidal flat, as well as the wet and dry depositions of industrial dusts. It seems that heavy metals prefer to accumulate and be enriched in the sediments near large sewage outlets, high flats, and the subsurface layer at the depth of 10–30 cm. Several main factors, which include the direct sewage discharge along the tidal flat, tidal hydrodynamic action, large engineering activity, early diagenesis and windstorm tide, are considered to be responsible for influencing spatial distribution patterns of heavy metals in the Shanghai tidal flat.

     

Spatial distribution and accumulation of heavy metals in tidal flat sediments of Shanghai coastal zone

Surface and core sediments from the high, middle and low tidal flats of Shanghai coastal zone were analyzed for heavy metal (e.g. Cu, Pb, Zn, Cr, Cd, Fe, Mn) concentrations. Besides Cd, the concentrations of Cu, Zn, Cr and Pb are 2-5 times higher than their background values and show serious pollution trend due to the direct discharge of industrial and municipal sewage along the Shanghai tidal flat, as well as the wet and dry depositions of industrial dusts. It seems that heavy metals prefer to accumulate and be enriched in the sediments near large sewage outlets, high flats, and the subsurface layer at the depth of 10-30 cm. Several main factors, which include the direct sewage discharge along the tidal flat, tidal hydrodynamic action, large engineering activity, early diagenesis and windstorm tide, are considered to be responsible for influencing spatial distribution patterns of heavy metals in the Shanghai tidal flat.     

黔产市售绿茶重金属的含量特征及健康风险评估

为研究黔产市售绿茶中重金属的含量分布特征及健康风险,以五个生产加工地的黔产市售绿茶为研究对象,分析其9种重金属(Pb、Cr、Cd、Hg、Cu、Zn、Mn、Ni和As)含量,利用美国环境保护署(USEPA)推荐的健康风险评价模型进行人体重金属的健康风险评价。结果表明,五种茶叶中Cr、Cd、Pb、Hg、Cu和As含量均低于国家限量标准。黔产市售绿茶的重金属浸出率大小次序为Zn>Mn>Hg>As>Cd>Pb>Cr>Cu>Ni。健康风险评价结果表明,五个产地的绿茶中重金属通过饮茶途径所产生的健康危害个人年风险大小次序为Cd>As>Mn>Ni>Cr>Hg>Pb>Zn>Cu,茶叶中重金属通过饮茶途径所产生的个人健康危害年风险总和为4.33×10-6~5.73×10-6 a-1,均低于USEPA和ICRP推荐的最大可接受风险水平,表明重金属引起的健康危害极小,其对暴露人群造成的健康危害可忽略不计,绿茶中重金属均处于安全范围内。     

Assessment of heavy metals pollution in Sudanese harbours along the Red Sea Coast

The levels of some heavy metals in sediments of two harbours along the Sudanese Coast of the Red Sea were examined and reported for the first time. A total of thirty-six surface sediment samples were collected from Port-Sudan and Sawakin harbours. Part of each sample was partitioned into five fractions with grain-size ranges of 1000–500, 500–250, 250–125, 125–63 and less than 63 μm. The Mn, Fe, Ni, Cu, Zn and Pb concentration in bulk samples and sub-samples were determined by atomic absorption spectrophotometry. The spatial distribution pattern of heavy metal content of crustal origin in the sediments is more uniform in Port-Sudan harbour than in Sawakin harbour. The granulometric normalization revealed that some sites in Port-Sudan harbour and one site in Sawakin harbour have been exposed to different levels of heavy metal contamination, which probably originated from ships, industrial and domestic activities.     

象山港海底沉积物中重金属的赋存形态

以象山港海底沉积物为研究对象,采用了五步连续萃取法对象山港区域表层沉积物中重金属(Fe、Mn、Cu、Zn)赋存形态进行了研究,分析了各形态重金属在象山港不同采样点中的分布特征和影响因素.结果表明,象山港海域表层沉积物中各重金属元素主要来源于自然输入的残留态,人为输入的各种活性形态所占比例相对较少,但受两种因素的影响的差...     

Determination of heavy metals in macrozoobenthos from the rivers Tisza and Szamos by total reflection X-ray fluorescence spectrometry

In 2000, accidents in the Romanian mining industry in key catchment areas led to heavy metal contamination of the Hungarian rivers Tisza and Szamos resulting in substantial heavy metal loads in several sediments of the upper river basins. This enhanced metal content might have been bioaccumulated in benthic organisms during the following years. Therefore, the aim of this study was to test, whether the zoobenthic fauna showed an enhanced metal content 3 years after the industrial accident. Macrozoobenthic insect larvae (chironomids) were sampled 100 m below and above the confluent site of the rivers Tisza and Szamos during summer 2003 and for comparison purpose also in the river Maros, a tributary of the Tisza river, during 2005. In order to determine their heavy metal content, single specimens were prepared and analysed by Total Reflection X-ray Fluorescence Spectrometry (TRXF) according to the modified dry method. Fe was much lower and Mn and Zn much higher concentrated in benthos from the more contaminated Szamos river compared to the Tisza and Maros rivers. In this sense, the benthic organisms reflected very well the enhanced metal concentrations in the contaminated rivers being suitable as bioindicators of metal contamination. However, the sediment bioaccumulation factor was low at all sampling sites indicating a low bioavailability of trace metals for benthic organisms.     

Heavy metal contamination of surface soil around Gebze industrial area, Turkey

An increase in heavy metal pollution in the soils of Gebze (Turkey) due to intense industrialization and urbanization has become a serious environmental problem. There are two large organized industrial zones in Gebze; the Gebze Organized Industrial Zone (GOIZ) and the Dilovas? Organized Industrial Zone (DOIZ). The region hosts several industrial facilities which are the main source for hazardous wastes which include paint, plastic, electric, metal, textile, wood, automotive supply industry, food, cosmetics, packing, machinery, and chemicals. Soil samples were collected from these two industrial zones and analyzed for their metal contents. Results of the analysis show that the soils are characterized by high concentrations of Cd, As, Pb, Zn, Mn, Cu, Cr and Hg. Since concentrations of other elements do not exceed the permissible levels, they are not evaluated. Concentrations are 0.05-176 mg/kg of Cd, 10-1161 mg/kg of Cr, 7.87-725 mg/kg of Cu, 1.50-65.60 mg/kg of As, 17.07-8469 mg/kg of Pb, 1.96-10,000 mg/kg of Mn, 29.5-10,000 mg/kg of Zn, and 9-2721 μg/kg of Hg. Application of factor, cluster and correlation analysis showed that heavy metal contamination in soils originates from industrial activities and heavy traffic which are of anthropogenic origin. Contaminations in soils were classified as geoaccumulation index, enrichment factor, contamination factor, and contamination degree. Integrated pollution index (IPI) values indicate that heavy metal pollution levels of soils collected from industrialization sites are greater than those from distal parts of industrialization. Spreading of hazardous wastes from industrial facilities in the study area via rain or wind is the main source of soil pollution. In addition, traffic-related metal pollution is also observed.     

耐高盐碱蓬对湿地土壤中金属元素的富集特征研究

基于秦皇岛滨海湿地人工种植耐高盐碱蓬修复工程试验,通过分析湿地土壤沉积物及耐高盐碱蓬中不同金属元素的含量与变化,研究了耐高盐碱蓬对金属元素的富集特征。结果显示:湿地沉积物中Fe、Mn、Cr、Pb和Zn的浓度较高,分别为8 210. 94、110. 04、8. 78、8. 25、10. 95 mg/kg,Cd的浓度最低,平均值为0. 022 mg/kg,湿地试验区土壤中同一金属元素变异程度较小,分布较均匀。碱蓬体内重金属含量根据采集地点的不同有差异,但与各站位中土壤的重金属分布特征存在正相关性;其中碱蓬内Fe、Mn、Zn、Cu的平均含量相对较高,且Fe、Mn、Ni、Cu、As、Cd、Pb元素在碱蓬根中的平均含量高于茎叶,而Cr在茎中的平均含量最高,Zn和Mo在叶中的含量最高。碱蓬的根、茎、叶对Cd的富集效果最好,其次为Mo、Cu,对Fe、Mn、Zn、As和Pb的富集效果相对较差,说明碱蓬对沉积物中不同金属元素的富集移出率存在差异。金属元素在碱蓬中的转移系数研究表明,Mo、Zn、Cd和Mn等元素可由根部转移到叶中,而Fe、Ni、Pb、As和Cu等金属元素固定在根部,该研究可为利用碱蓬修复湿地重金属污染提供理论基础。     

表层沉积物(生物膜)非残渣态组分的选择性萃取分离及其吸附铜/锌的特性

采用化学萃取技术对表层沉积物(生物膜)的非残渣态组分(铁、锰氧化物及有机质)进行了分离, 并研究了表层沉积物(生物膜)非残渣态和残渣态组分吸附铜、锌的特性. 结果表明, 0.1 mol/L NH2OH·HCl+0.1 mol/L HNO3, (NH4)2C2O4-H2C2O4缓冲溶液和体积分数为30%的H2O2可选择性地萃取分离表层沉积物(生物膜)非残渣态的锰氧化物、铁锰氧化物和有机质, 萃取率为63.15%～97.59%, 同时对非目的组分影响较小; 表层沉积物(生物膜)及其各组分对铜的吸附能力均大于对锌的吸附能力, 且生物膜及其各组分对铜、锌的吸附能力均高于表层沉积物及其相应组分对铜、锌的吸附能力; 表层沉积物(生物膜)非残渣态组分对铜、锌的吸附能力均大于残渣态组分, 且非残渣态组分中锰氧化物的单位吸附能力最强, 其次是铁氧化物, 而有机质的单位吸附能力较弱, 比锰氧化物低2个数量级, 说明生物膜对水体中痕量重金属的迁移转化作用强于表层沉积物, 而表层沉积物(生物膜)中金属(铁、锰)氧化物对水中痕量重金属起主要控制作用.     

Evaluation of grinding methods for pellets preparation aiming at the analysis of plant materials by laser induced breakdown spectrometry

It has been demonstrated that laser induced breakdown spectrometry (LIBS) can be used as an alternative method for the determination of macro (P, K, Ca, Mg) and micronutrients (B, Fe, Cu, Mn, Zn) in pellets of plant materials. However, information is required regarding the sample preparation for plant analysis by LIBS. In this work, methods involving cryogenic grinding and planetary ball milling were evaluated for leaves comminution before pellets preparation. The particle sizes were associated to chemical sample properties such as fiber and cellulose contents, as well as to pellets porosity and density. The pellets were ablated at 30 different sites by applying 25 laser pulses per site (Nd:YAG@1064 nm, 5 ns, 10 Hz, 25 J cm⁻²). The plasma emission collected by lenses was directed through an optical fiber towards a high resolution echelle spectrometer equipped with an ICCD. Delay time and integration time gate were fixed at 2.0 and 4.5 μs, respectively. Experiments carried out with pellets of sugarcane, orange tree and soy leaves showed a significant effect of the plant species for choosing the most appropriate grinding conditions. By using ball milling with agate materials, 20 min grinding for orange tree and soy, and 60 min for sugarcane leaves led to particle size distributions generally lower than 75 μm. Cryogenic grinding yielded similar particle size distributions after 10 min for orange tree, 20 min for soy and 30 min for sugarcane leaves. There was up to 50% emission signal enhancement on LIBS measurements for most elements by improving particle size distribution and consequently the pellet porosity.     

Application of Metalfix Chelamine prior to the determination of noble metals by the inductively coupled plasma atomic emission spectrometry

Metalfix Chelamine chelating resins of two different bead sizes (150-300 and 40-80 μm) were examined and compared regarding their application for sorption of Au, Ir, Pd, Pt, Rh and Ru ions from medium of HCl, HNO₃ and mixtures of HCl and HNO₃. The quantitative enrichment of Au, Ir, Pd and Pt was established for the resin of 150-300 μm particle size and for solutions acidified with HCl and HNO₃ (3:1) up to the concentration of 0.50 mol l⁻¹. In the case of Rh and Ru, the uptake of these metals by the resin was lower than 50%. For the elution, solutions of different reagents, i.e. HCl, HNO₃, KCN, KI, KSCN and (NH₂)₂CS, were studied with respect to the complete release of the analytes retained by the resin. In addition, influence of various base metals, i.e. Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb and Zn, on the retention of the noble metals was investigated. Under the selected conditions for the retention and elution of Au, Ir, Pd and Pt, the analytical performance of the proposed pre-concentration procedure was evaluated and it was applied to the determination of these noble metals in anodic sludge sample.     

Heavy-metal distribution in river waters and sediments around a "firefly village", Shikoku, Japan: application of multivariate analysis.

River water and sediment samples were collected at the same site in a vicinity of an abandoned mine, and the concentrations of major elements and heavy metals were determined. The chemical correlations were observed by principal component analysis (PCA), and the samples were classified by cluster analysis (CA) based on the PCA scores. The PCA results presented a macroscopic viewpoint of covariance structure, i.e., the chemical elements could be classified into three groups: 1) major elements and heavy metals in the river water, 2) Cd, Fe and Mn in the sediments, and 3) Cu and Zn in the sediments. The CA results implied a similarity of chemical compositions in most parts of the study area, except the ranges close to the abandoned copper mine. At the mixing location of mining water with natural river water, major elements and cadmium showed simple physical mixing (conservative mixing). Other heavy metals (Cu, Fe, Mn and Zn) showed the massive precipitation at the mixing event. The PCA structure was mainly interpreted in terms of the mixing process between mining water and diluted natural river water.     

Spectrafluorimetric method for the rapid screening of toxic heavy metals in water samples

A fast and inexpensive sensitive screening test for recognising potential wastewater contamination by the presence of highly toxic heavy metals is described. The test is based on the reaction of the toxic heavy metals Hg(II), Cd(II), Pb(II) and Ag(I) with 6-mercaptopurine (6-MP) to produce highly fluorescent complexes.Optimum experimental conditions include a buffer of pH 7.2 (0.1 M citric acid/0.2 M Na₂HPO₄), a chelating reagent concentration of 6×10⁻⁴ M and the addition of 10⁻⁴ M of o-phenanthroline. The fluorescence emitted by the complexes was measured at 380 and 540 nm for excitation and emission wavelengths, respectively.Detection limits of 4, 3, 6 and 3 μg l⁻¹ were achieved for Hg, Cd, Pb and Ag. Relative standard deviation (R.S.D.) were between ±2 and ±6% of the fluorescence signals for five identical samples. Potential interference effects from other heavy metals (Zn, Mn, Co, Fe, Ni and Cu), which could affect the response of the proposed screening test was investigated. Results showed that none of these metals give rise to noticeable fluorescence signals under the above described experimental conditions.Finally, the capability of the proposed heavy metal screening test for the analysis of contaminated water samples is discussed.     

Screening of urban aerosol particulate composites for selected metal distribution and their dependence on meteorological parameters

Local atmospheric aerosol particulate samples, collected as composites on daily 6-12 hour basis, at Quaid-i-Azam University campus, Islamabad, Pakistan, using high volume sampling technique, were analysed for Pb, Na, K, Fe, Mn, Cd, Cr, Ni, Zn and Co by FAAS method. The monitoring period ran from October, 2001 through March, 2002, with a total of 105 samples collected on cellulose filters, treated in part with the HNO3-based wet digestion method for metal quantification, and for particle size distribution separately. The metal content of the aerosols was examined in relation to dependence on meteorological parameters, such as temperature, relative humidity, wind speed, sun shine and pan evaporation. Statistical correlation analysis was conducted for multiple metal pairs in aerosols, and the data were examined in relation to meteorological parameters and relevant aerosol particle size fractions. The study revealed no viable strong correlation between the meteorological parameters and metal levels; in general, however, a significant positive correlation was found for temperature. A strong positive correlation was observed for PM<25 and PM2.5-10. For coarse particles (PM10-100 and PM>100), however, a negative correlation was observed. The levels of Na, K, Fe and Zn were found in the range of 1-5 microg/m3 while those for the rest of the metals in the sub microg/m3 range. Principal component analysis and cluster analysis were performed on dataset for source identification and appointment. Largest contribution (33%) was shown by the industrial emissions followed by traffic/road dust (16.7%).     

A comparison of an optimised sequential extraction procedure and dilute acid leaching of elements in anoxic sediments, including the effects of oxidation on sediment metal partitioning

The effect of oxidation of anoxic sediment upon the extraction of 13 elements (Cd, Sn, Sb, Pb, Al, Cr, Mn, Fe, Co, Ni, Cu, Zn, As) using the optimised Community Bureau of Reference of the European Commission (BCR) sequential extraction procedure and a dilute acid partial extraction procedure (4 h, 1 mol L⁻¹ HCl) was investigated. Elements commonly associated with the sulfidic phase, Cd, Cu, Pb, Zn and Fe exhibited the most significant changes under the BCR sequential extraction procedure. Cd, Cu, Zn, and to a lesser extent Pb, were redistributed into the weak acid extractable fraction upon oxidation of the anoxic sediment and Fe was redistributed into the reducible fraction as expected, but an increase was also observed in the residual Fe. For the HCl partial extraction, sediments with moderate acid volatile sulfide (AVS) levels (1-100 μmol g⁻¹) showed no significant difference in element partitioning following oxidation, whilst sediments containing high AVS levels (>100 μmol g⁻¹) were significantly different with elevated concentrations of Cu and Sn noted in the partial extract following oxidation of the sediment. Comparison of the labile metals released using the BCR sequential extraction procedure (ΣSteps 1-3) to labile metals extracted using the dilute HCl partial extraction showed that no method was consistently more aggressive than the other, with the HCl partial extraction extracting more Sn and Sb from the anoxic sediment than the BCR procedure, whilst the BCR procedure extracted more Cr, Co, Cu and As than the HCl extraction.