Determination of amines using 2-(11H-benzo[a]carbazol-11-yl) ethyl chloroformate (BCEC-Cl) as labeling reagent by HPLC with fluorescence detection and identification with APCI/MS

A pre-column derivatization method for the sensitive determination of amines using a labeling reagent 2-(11H-benzo[a]-carbazol-11-yl) ethyl chloroformate (BCEC-Cl) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives was carried out by LC/APCI/MS in positive-ion mode. The chromophore of 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC-Cl) reagent was replaced by 2-(11H-benzo[a]-carbazol-11-yl) ethyl functional group, which resulted in a sensitive fluorescence derivatizing reagent BCEC-Cl. BCEC-Cl could easily and quickly label amines. Derivatives were stable enough to be efficiently analyzed by HPLC and showed an intense protonated molecular ion corresponding m/z [M + H]⁺ under APCI/MS in positive-ion mode. The collision-induced dissociation of the protonated molecular ion formed characteristic fragment ions at m/z 261.8 and m/z 243.8 corresponding to the cleavages of CH₂O-CO and CH₂-OCO bonds. Studies on derivatization demonstrated excellent derivative yields over the pH 9.0-10.0. Maximal yields close to 100% were observed with three- to four-fold molar reagent excess. In addition, the detection responses for BCEC-derivatives were compared to those obtained using 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC-Cl) and 9-fluorenyl methylchloroformate (FMOC-Cl) as labeling reagents. The ratios I_BCEC/I_BCEOC = 1.94-2.17 and I_BCEC/I_FMOC = 1.04-2.19 for fluorescent (FL) responses (here, I was relative fluorescence intensity). Separation of the derivatized amines had been optimized on reversed-phase Eclipse XDB-C₈ column. Detection limits calculated from 0.50 pmol injection, at a signal-to-noise ratio of 3, were 1.77-14.4 fmol. The relative standard deviations for within-day determination (n = 11) were 1.84-2.89% for the tested amines. The mean intra- and inter-assay precision for all amines levels were <3.64% and 2.52%, respectively. The mean recoveries ranged from 96.6% to 107.1% with their standard deviations in the range of 0.8-2.7. Excellent linear responses were observed with coefficients of >0.9996.     

Identification and determination of carboxylic acids in food samples using 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) as labeling reagent by HPLC with FLD and APCI/MS

A new labeling reagent for carboxylic acids, 2-(2-(anthracen-10-yl)-1H-phenanthro[9,10-d]imidazol-1-yl)ethyl 4-methylbenzenesulfonate (APIETS) has been designed and synthesized. It was used to label eight fatty acids (lauric acid, myristic acid, palmitic acid, stearic acid, arachidic acid, oleic acid, linoleic acid and linolenic acid) and four hydroxy pentacyclic triterpene acids (oleanolic acid, ursolic acid, betulinic acid and maslinic acid), successfully. APIETS could easily and quickly label carboxylic acids in the presence of K₂CO₃ catalyst at 85 °C for 35 min in N,N-dimethylformamide solvent. The carboxylic acids derivatives were separated on a C₈ reversed-phase column with gradient elution and fluorescence detection at λ_ex/λ_em = 315/435 nm. Identification of these derivatives was carried out by online mass spectrometry with atmospheric pressure chemical ionization in positive ion mode. The detection limits obtained were 13.37-30.26 fmol (signal-to-noise ratio of 3). The proposed method has been applied to the quantification of carboxylic acids in sultana raisin (Thompson seedless), hawthorn flake (Crataegus pinnatifida Bge.), Lycium barbarum seed oil and Microula sikkimensis seed oil with recoveries over 95.3%. It has been demonstrated that APIETS is a prominent labeling reagent for determining carboxylic acids with high performance liquid chromatography.     

Dual-sensitive probe 1-imidazole-2-(5-benzoacridine)-ethanone for the determination of amines in environmental water using HPLC with fluorescence detection and online atmospheric chemical ionization-mass spectrometry identification

Dual-sensitive probe of 1-imidazole-2-(5-benzoacridine)-ethanone (IBAE) for the determination of free amines with fluorescence detection and online highly sensitive atmospheric chemical ionization-mass spectrometry identification (APCI-MS) has been developed. 2-(Benzoacridine)-5-acetic acid (BAAA) reacts with coupling agent N,N′-carbonyldiimidazole (CDI) to form a highly activated amide intermediate 1-imidazole-2-(5-benzoacridine)-ethanone (IBAE), which is dual-sensitive probe. The amide intermediate (IBAE) reacts preferably with amines in dimethylformamide (DMF) solvent to give the high yields of derivatives. IBAE-amine derivatives are not only sensitive to fluorescence but also to MS ionizable efficiency. The percent ionization δ values change from 0 to 57.32% in aqueous acetonitrile and from 0 to 62.14% in aqueous methanol. The relative standard deviations of the peak areas with fluorescence detection for each amine are <1.24% (40 ng/ml, n = 6). The fluorescence detection limits (at a signal-to-noise ratio of 3) are in the range of 0.15-0.50 ng/ml. The online APCI-MS detection limits are in the range of 2.07-8.51 ng/ml (at a signal-to-noise ratio of 3). Therefore, the facile IBAE intermediate derivatization allowed the development of a highly sensitive and specific method for the quantitative analysis of trace levels of amines in environmental water.     

Micellar electrokinetic chromatography-chemiluminescent detection of biogenic amines using N-(4-aminobutyl)-N-ethylisoluminol as derivatization reagent and trivalent copper chelate as chemiluminescence enhancer

A facile, sensitive and universal method was established for analysis of biogenic amines using micellar electrokinetic chromatography coupled with chemiluminescent (CL) detection. It was found that diperiodatocuprate (III) (K₅[Cu(HIO₆)₂], DPC), a transition metal chelate at unstable high oxidation state, could effectively enhance the reaction between luminol-type compound and hydrogen peroxide, to produce very strong CL signal. In addition, triethylamine was found to be able to effectively improve the yield of the derivatization reaction between biogenic amines and a luminol-type derivatization reagent, N-(4-aminobutyl)-N-ethylisoluminol (ABEI). Based on these facts, three biogenic amines were pre-column derivatized with ABEI, and post-column detected using high sensitive luminol-hydrogen peroxide-DPC CL system. Since the background was quite low, and the signal was quite strong, a considerable improved sensitivity was obtained. The presented method had been successfully applied to simultaneously analyze glycine, proline and phenylalanine with the detection limits (S/N = 3) of 0.030 μmol L⁻¹, 0.23 μmol L⁻¹ and 0.21 μmol L⁻¹, respectively. To evaluate its potential application value, glycine in saliva and urine samples was detected using this method, and satisfied results were obtained. This approach can be further extended to detection of many other compounds such as peptides and drugs by using luminol-type derivatization reagent.     

Au(I)/Ag(I)-catalyzed annulation of sugar aldehyde tethered with 3-phenylprop-2-yn-1-yl ether with aryl amines for the pyrano[4,3-b]quinoline derivatives

Aryl amines undergo smooth annulation with O-phenylpropynyl sugar aldehyde in the presence of the Ph₃PAuCl (10 mol %)/AgSbF₆ (10 mol %) catalytic system to afford the corresponding tetrahydro-3aH-spiro[[1,3]dioxolo[4″,5″:4′,5′]furo[3′,2′:5,6]pyrano[4,3-b]quinoline-2,1′-cyclohexane] derivatives in good yields and selectivity.     

Flow-injection catalytic spectrophotometic determination of molybdenum(VI) in plants using bromate oxidative coupling of p-hydrazinobensenesulfonic acid with N-(1-naphthyl)ethylenediamine

A novel flow-injection spectrophotometry has been developed for the determination of molybdenum(VI) at nanograms per milliliter levels. The method is based on the catalytic effect of molybdenum(VI) on the bromate oxidative coupling of p-hydrazinobenzenesulfonic acid with N-(1-naphthyl)ethylenediamine to form an azo dye (λ_max = 530 nm). Chromotropic acid (4,5-dihydroxy-2,7-naphthalenedisulfonic acid) acted as an effective activator for the molybdenum(VI)-catalyzed reaction and increased the sensitivity of the method. The reaction was monitored by measuring the change in absorbance of the dye produced. The proposed method allowed the determination of molybdenum(VI) in the range 1.0-20 ng mL⁻¹ with sample throughput of 15 h⁻¹. The limit of detection was 0.5 ng mL⁻¹ and a relative standard deviation for 10 ng mL⁻¹ molybdenum(VI) (n = 10) was 2.5%. The interfering ions were eliminated by using the combination of a masking agent and on-line minicolumn packed with cation exchanger. The present method was successfully applied to the determination of molybdenum(VI) in plant foodstuffs.     

A sensitive fluorescence reagent for the determination of aldehydes from alcoholic beverage using high-performance liquid chromatography with fluorescence detection and mass spectrometric identification

A pre-column derivatization method for the sensitive determination of aldehydes using the tagging reagent 2-[2-(7H-dibenzo[a,g] carbazol-7-yl)-ethoxy] ethyl carbonylhydrazine (DBCEEC) followed by high-performance liquid chromatography with fluorescence detection and APCI-MS identification has been developed. The chromophore of fluoren-9-methoxy-carbonylhydrazine (Fmoc-hydrazine) reagent was replaced by 2-[2-(7H-dibenzo[a,g] carbazol-7-yl)-ethoxy] ethyl functional group, which resulted in a sensitive fluorescence tagging reagent DBCEEC. DBCEEC could easily and quickly labeled aldehydes. The maximum excitation (300 nm) and emission (400 nm) wavelengths did not essentially change for all the aldehyde derivatives. Derivatives were sufficiently stable to be efficiently analyzed by high-performance liquid chromatography. The derivatives showed an intense protonated molecular ion corresponding m/z [M + (CH₂)_n]⁺ in positive-ion mode (M: molecular weight of DBCEEC, n: corresponding aldehyde carbon atom numbers). The collision-induced dissociation of protonated molecular ion formed fragment ions at m/z 294.6, m/z 338.6 and m/z 356.5. Studies on derivatization demonstrated excellent derivative yields in the presence of trichloroacetic acid (TCA) catalyst. Maximal yields close to 100% were observed with a 10 to 15-fold molar reagent excess. Separation of the derivatized aldehydes had been optimized on ZORBAX Eclipse XDB-C₈ column with aqueous acetonitrile as mobile phase in conjunction with a binary gradient elution. Excellent linear responses were observed at the concentration range of 0.01-10 nmol mL⁻¹ with coefficients of >0.9991. Detection limits obtained by the analysis of a derivatized standard containing 0.01 nmol mL⁻¹ of each aldehyde, were from 0.2 to 1.78 nmol L⁻¹ (at a signal-to-noise ratio of 3).     

Spin trapping of alkoxyl radicals generated from 5-methyl and 5-aryl-3-alkoxy-4-methylthiazole-2(3H)-thiones in photochemically induced and microwave-initiated reactions

Methoxyl and isopropoxyl radicals were generated from N-alkoxy-4,5-dimethylthiazole-2(3H)-thiones (λ_max∼320 nm) and 5-aryl derivatives (aryl=p-XC₆H₄; X=MeO, H, AcNH, Cl) (λ_max∼335 nm) in photochemically and microwave-induced reactions. Alkoxyl radicals were trapped with dimethylpyrrolidine N-oxide and characterized as spin adducts via EPR. Cumyloxyl radicals were liberated in a similar manner from N-cumyloxy-5-(4-methoxyphenyl)-4-methylthiazole-2(3H)-thione. A noteworthy bathochromic shift was found for the lowest energy transition of N-(hydroxy)indeno[2,1-d]thiazole-2(3H)-thione (λ_max=376 nm), if compared to the UV-vis absorption of N-hydroxy-4-methyl-5-phenylthiazole-2(3H)-thione (λ_max=338 nm). Syntheses of alkoxyl radical precursors and procedures for conducting N,O-homolysis are described in a full account.     

1-(2′-Pyridylazo)-2-naphtholate (PAN) complexes of rhodium(III): Synthesis,structure and spectral studies

The ligating properties 1-(2′-pyridylazo)-2-naphthol (HPAN) toward Rh(III) have been examined. The reaction of RhCl₃·3H₂O with HPAN in presence of excess PPh₃ afforded trans-[Rh(PAN)Cl(PPh₃)₂]PF₆ (3PF₆). Intermediate cis-[Rh(PAN)Cl₂(PPh₃)] (4) has also been isolated. Solid state structures were authenticated by X-ray analyses revealing that monoanionic PAN is coordinated to rhodium in meridional fashion. Both the compounds were spectroscopically characterized in both solution and solid states, which include IR, NMR (¹H and ³¹P), and optical spectra. The diamagnetic complexes show multiple CT transitions in the visible region. Low-energy transitions (λ ≈ 550–650 nm) occurred in the absorption spectra are predominantly ligand centered in nature. The rhodium(III)–PAN compounds are red emissive (λ_em ≈ 650 nm) at room temperature and the nature of the emission level is probably an ILCT level. Complexes are electro-active in acetonitrile and display irreversible oxidative and reductive waves and these responses are ascribed to be PAN ligand centered in character.     

Gallium(III) triflate-catalyzed one-pot selective synthesis of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones

A series of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones have been synthesized in good to excellent yields and high selectivity by one-pot reaction using isatoic anhydride, ammonium acetate (or amines), and aldehydes in ethanol or in DMSO under mild conditions, respectively. The reaction was efficiently promoted by 1 mol % Ga(OTf)₃ and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.     

Synthesis of N-functionalized 2,2′-dipyridylamine ligands, complexation to ruthenium (II) and anchoring of complexes to papain from papaya latex

2,2′-Dipyridylamine (dpa) derivatives carrying a thiol-targeted maleimide group located at the end of an alkyl substituent on the central amine were synthesized. Reaction with the organometallic precursors [(η⁶-arene)RuCl₂]₂ (arene = benzene or p-cymene) yielded the half-sandwich cationic complexes [(η⁶-arene)Ru(dpa)Cl]⁺ where the dipyridylamine derivatives were coordinated as bidentate N,N donor ligands. Enzymatic studies showed that these derivatives were able to inactivate the cysteine endoproteinase papain by S-alkylation of the cysteine active site.     

Novel methods for the quantification of (2E)-hexadecenal by liquid chromatography with detection by either ESI QTOF tandem mass spectrometry or fluorescence measurement

Sphingosine-1-phosphate lyase (SPL) is the only known enzyme that irreversibly cleaves sphingosine-1-phosphate (S1P) into phosphoethanolamine and (2E)-hexadecenal during the final step of sphingolipid catabolism. Because S1P is involved in a wide range of physiological and diseased processes, determining the activity of the degrading enzyme is of great interest. Therefore, we developed two procedures based on liquid chromatography (LC) for analysing (2E)-hexadecenal, which is one of the two S1P degradation products. After separation, two different quantification methods were performed, tandem mass spectrometry (MS) and fluorescence detection. However, (2E)-hexadecenal as a long-chain aldehyde is not ionisable by electrospray ionisation (ESI) for MS quantification and has an insufficient number of corresponding double bonds for fluorescence detection. Therefore, we investigated 2-diphenylacetyl-1,3-indandione-1-hydrazone (DAIH) as a derivatisation reagent. DAIH transforms the aldehyde into an ionisable and fluorescent analogue for quantitative analysis. Our conditions were optimised to obtain the outstanding limit of detection (LOD) of 1 fmol per sample (30 μL) for LC–MS/MS and 0.75 pmol per sample (200 μL) for LC determination with fluorescence detection. We developed an extraction procedure to separate and concentrate (2E)-hexadecenal from biological samples for these measurements. To confirm our new methods, we analysed the (2E)-hexadecenal level of different cell lines and human plasma for the first time ever. Furthermore, we treated HT-29 cells with different concentrations of 4-deoxypyridoxine (DOP), which competitively inhibits pyridoxal-5-phosphate (P5P), an essential cofactor for SPL activity, and observed a significant decrease in (2E)-hexadecenal relative to the untreated cells.     

An improved reagent for determination of aliphatic amines with fluorescence and online atmospheric chemical ionization-mass spectrometry identification

An improved reagent named 2-[2-(dibenzocarbazole)-ethoxy] ethyl chloroformate (DBCEC-Cl) for the determination of aliphatic amines by high-performance liquid chromatography (HPLC) with fluorescence detection and post-column online atmospheric chemical ionization-mass spectrometry (APCI-MS) identification has been developed. DBCEC-Cl could easily and quickly label aliphatic amines. Derivatives were stable enough to be efficiently analyzed by HPLC and showed an intense protonated molecular ion corresponding m/z [M+H]⁺ under APCI-MS in positive-ion mode. The ratios for fluorescence responses were I_DBCEC-amine/I_BCEC-amine = 1.02-1.60; I_DBCEC-amine/I_BCEOC-amine = 1.30-2.57; and I_DBCEC-amine/I_FMOC-amine = 2.20-4.12 (here, I was relative fluorescence intensity). The ratios for MS responses were IC_DBCEC-amine/IC_BCEC-amine = 4.16-29.31 and IC_DBCEC-amine/IC_BCEOC-amine = 1.23-2.47 (Here, IC: APCI-MS ion current intensity). Detection limits calculated from 0.0244 pmol injection, at a signal-to-noise ratio of 3, were 0.3-3.0 fmol. The relative standard deviations for within-day determination (n = 6) were 0.045-0.081% for retention time and 0.86-1.03% for peak area for the tested aliphatic amines. The mean intra- and inter-assay precision for all amine levels were <3.64% and 4.67%, respectively. The mean recoveries ranged from 96.9% to 104.7% with their standard deviations in the range of 1.80-2.70 (RSDs%). Excellent linear responses were observed with coefficients of >0.9991.     

Development of a sensitive fluorescent derivatization reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC) and its application for determination of amino acids from seeds and bryophyte plants using high-performance liquid chromatography with fluorescence detection and identification with electrospray ionization mass spectrometry

A pre-column derivatization method for the sensitive determination of amino acids and peptides using the tagging reagent 1,2-benzo-3,4-dihydrocarbazole-9-ethyl chloroformate (BCEOC) followed by high-performance liquid chromatography with fluorescence detection has been developed. Identification of derivatives was carried out by liquid chromatography/electrospray ionization mass spectrometry (LC/ESI-MS/MS). The chromophore of 2-(9-carbazole)-ethyl chloroformate (CEOC) reagent was replaced by 1,2-benzo-3,4-dihydrocarbazole functional group, which resulted in a sensitive fluorescence derivatizing reagent BCEOC. BCEOC can easily and quickly label peptides and amino acids. Derivatives are stable enough to be efficiently analyzed by high-performance liquid chromatography. The derivatives showed an intense protonated molecular ion corresponding m/z (M + H)⁺ under electrospray ionization (ESI) positive-ion mode with an exception being Tyr detected at negative mode. The collision-induced dissociation of protonated molecular ion formed a product at m/z 246.2 corresponding to the cleavage of CO bond of BCEOC molecule. Studies on derivatization demonstrate excellent derivative yields over the pH 9.0-10.0. Maximal yields close to 100% are observed with a 3-4-fold molar reagent excess. Derivatives exhibit strong fluorescence and extracted derivatization solution with n-hexane/ethyl acetate (10:1, v/v) allows for the direct injection with no significant interference from the major fluorescent reagent degradation by-products, such as 1,2-benzo-3,4-dihydrocarbazole-9-ethanol (BDC-OH) (a major by-product), mono-1,2-benzo-3,4-dihydrocarbazole-9-ethyl carbonate (BCEOC-OH) and bis-(1,2-benzo-3,4-dihydrocarbazole-9-ethyl) carbonate (BCEOC)₂. In addition, the detection responses for BCEOC derivatives are compared to those obtained with previously synthesized 2-(9-carbazole)-ethyl chloroformate (CEOC) in our laboratory. The ratios AC_BCEOC/AC_CEOC = 2.05-6.51 for fluorescence responses are observed (here, AC is relative fluorescence response). Separation of the derivatized peptides and amino acids had been optimized on Hypersil BDS C₁₈ column. Detection limits were calculated from 1.0 pmol injection at a signal-to-noise ratio of 3, and were 6.3 (Lys)-177.6 (His) fmol. The mean interday accuracy ranged from 92 to 106% for fluorescence detection with mean %CV < 7.5. The mean interday precision for all standards was <10% of the expected concentration. Excellent linear responses were observed with coefficients of >0.9999. Good compositional data could be obtained from the analysis of derivatized protein hydrolysates containing as little as 50.5 ng of sample. Therefore, the facile BCEOC derivatization coupled with mass spectrometry allowed the development of a highly sensitive and specific method for the quantitative analysis of trace levels of amino acids and peptides from biological and natural environmental samples.     

Evaluation of C18 adsorbent cartridges for sampling and derivatization of primary amines in air

The sampling efficiency of C₁₈ solid-phase extraction cartridges was investigated for methylamine, ethylamine, propylamine, butylamine and pentylamine, in air. Determination of these analytes was based on derivatization with o-phthaldialdehyde-N-acetylcysteine (OPA-NAC) on the solid support and fluorescence detection at λ_excitation=330 nm and λ_emission=440 nm of the eluted derivatives. The calibration model derived from aqueous standards was statistically comparable with the calibration model for air standards. Aqueous amines can be used as standards. The method was useful for calculating short-term exposure limits (STEL). A sampling time of 15 min at 30 ml min⁻¹ was employed. Good recoveries for amines alone and their mixtures were obtained from air and water samples, 98±14 and 97±12% (mean ), respectively. Recovery values were independent of amine concentration. The detection limits varied between 0.16 and 0.52 μg per sample (0.35 and 1.18 mg m⁻³, respectively) and the calibration graphs were linear in the range 0.5-2 μg per sample except for pentylamine, which was 1.5-5 μg per sample. The utility of the method was demonstrated for the estimation of methylamine in two generated air samples.     

Synthesis and phase separation of amine-functional temperature responsive copolymers based on poly(N-isopropylacrylamide)

Free radical copolymerizations of N-isopropyl acrylamide (NIPAM) and cationic N-(3-aminopropyl) methacrylamide hydrochloride (APMH) were investigated to prepare amine-functional temperature responsive copolymers. The reactivity ratios for NIPAM and APMH were evaluated in media of different ionic strength (r_NIPAM = 0.7 and r_APMH = 0.7-1.2). Phase separation behavior of the random copolymers with only 5 mol% of the APMH was found to be suppressed in pure water at temperatures up to 45 °C due to electrostatic repulsion among the cationic amine groups randomly distributed along the copolymer chain. Alternate sequential addition of PNIPAM/APMH mixtures and pure NIPAM was used to provide increased control of the location of APMH units along the chain. Consequently (close to) homo-PNIPAM block(s) were formed as evidenced by its characteristic phase transition at 33 °C. The influences of the monomer feeding time and feeding interval time to the APMH distribution were investigated to prepare copolymers with thermo-induced phase separation under physiologically relevant temperature and to determine the extent of conjugation to poly(ethylene oxide).     

Reaction of 1-vinylpyrrole-2-carbaldehydes with phosphorus pentachloride: a stereoselective synthesis of E-2-(2-dichloromethylpyrrol-1-yl)vinylphosphonyl dichlorides

1-Vinylpyrrole-2-carbaldehydes react with phosphorus pentachloride (benzene, 10-15 °C) to afford E-2-(2-dichloromethylpyrrol-1-yl)vinylphosphonium hexachlorophosphates in up to 85% yield, which after treatment with SO₂ (benzene, rt) are converted into E-2-(2-dichloromethylpyrrol-1-yl)vinylphosphonyl dichlorides in 50-75% yields.     

Dimolybdenum complexes containing anions of N,N′-bis(pyrimidine-2-yl)formamidine and N-(2-pyrimidinyl)formamide

The reactions of Mo₂(O₂CCH₃)₄ with different equivalents of N,N′-bis(pyrimidine-2-yl)formamidine (HL1) and N-(2-pyrimidinyl)formamide (HL2) afforded dimolybdenum complexes of the types Mo₂(O₂CCH₃)(L1)₂(L2) (1) trans-Mo₂(L1)₂(L2)₂ (2) cis-Mo₂(L1)₂(L2)₂ (3) and Mo₂(L2)₄ (4). Their UV–Vis and NMR spectra have been recorded and their structures determined by X-ray crystallography. Complexes 2 and 3 establish the first pair of trans and cis forms of dimolybdenum complexes containing formamidinate ligands. The L1 ligands in 1–3 are bridged to the metal centers through two central amine nitrogen atoms, while the L2 ligands in 1–4 are bridged to the metal centers via one pyrimidyl nitrogen atom and the amine nitrogen atom. The Mo–Mo distances of complexes 1 [2.0951(17) Å], 2 [2.103(1) Å] and 3 [2.1017(3) Å], which contain both Mo?N and Mo?O axial interactions, are slightly longer than those of complex 4 [2.0826(12)–2.0866(10) Å] which has only Mo?O interactions.     

N-(Pyridin-2-yl)picolinamide tetranickel clusters: Synthesis,structure and ethylene oligomerization

A series of N-(pyridin-2-yl)picolinamide derivatives was synthesized and characterized. Tetranickel complexes were obtained by stoichiometric reaction of NiBr₂ and corresponding ligands, and characterized by elemental and spectroscopic analysis. Moreover, the coordination pattern of complex 3a was confirmed by single-crystal X-ray diffraction. In the structure, two ligands linked two nickel atoms to form a unit, and two units were bridged via μ₃-OMe and μ₂-Br to form a tetranickel cluster. These Ni(II) complexes were investigated in ethylene oligomerization and found to exhibit remarkable catalytic activities upon activation with MAO. Reaction conditions as well as ligand environment significantly affected the catalytic performance of the nickel complexes; the highest activity could be achieved to be 2.7 × 10⁶ g mol⁻¹ Ni h⁻¹.     

Experimental vapor pressures of 1,2-bis(dimethylamino)ethane, 1-methylmorpholine, 1,2-bis(2-aminoethoxy)ethane and N-benzylethanolamine between 273.18 and 364.97 K

In this work, the experimental vapor pressures of four amines 1,2-bis(dimethylamino)ethane, 1-methylmorpholine, 1,2-bis(2-aminoethoxy)ethane and N-benzylethanolamine using a static apparatus are reported. The temperature range is comprised between 273.18 and 364.97 K and the pressure range between 0.782 Pa and 333 kPa. The molar enthalpies of vaporization at 298.15 K were calculated from Clausius–Clapeyron equation fitted on the experimental results.