Chloroform-Enhanced Incorporation of Hydrophobic Gold Nanocrystals into Dioleoylphosphatidylcholine (DOPC) Vesicle Membranes

Vesicles of dioleoylphosphatidylcholine (DOPC) formed by extrusion (liposomes) with hydrophobic alkanethiol-capped Au nanocrystals were studied. Dodecanethiol-capped 1.8-nm-diameter Au nanocrystals accumulate in the lipid bilayer, but only when dried lipid-nanocrystal films were annealed with chloroform prior to hydration. Without chloroform annealing, the Au nanocrystals phase separate from DOPC and do not load into the liposomes. Au nanocrystals with slightly longer capping ligands of hexadecanethiol or with a larger diameter of 4.1 nm disrupted vesicle formation and created lipid assemblies with many internal lamellar attachments.     

AFM characterization of spin-coated multilayered dry lipid films prepared from aqueous vesicle suspensions

We present a detailed AFM study on multilayered dry lipid films prepared from aqueous vesicle suspensions. Different preparation techniques were applied in order to optimize the preparation of homogeneous lipid films of various film thicknesses. Suspensions of preformed DOPC/DPPC vesicles were adsorbed onto indium tin oxide-coated glass coverslips, a substrate also commonly employed for the formation of giant liposomes. We found that the homogeneity of the lipid films could substantially be improved when applying a spin-coating step during the film preparation. These films were much more homogeneous than those prepared by conventional drop-casting and in addition the film thickness could be controlled. When using a combination of vesicle adsorption and spin-coating the quality and thickness of the films depended crucially on the lipid concentration of the vesicle suspension, the adsorption temperature and the adsorption time. For lipid films prepared by direct spin-coating the lipid concentration and the applied spin-coating sequence were critical parameters for the quality and thickness of the deposited lipid films.     

Multicomponent cationic lipid-DNA complex formation: role of lipid mixing

Multicomponent cationic lipid-DNA complexes (lipoplexes) were prepared by adding linear DNA to mixed lipid dispersions containing two populations of binary cationic liposomes and characterized by means of small angle X-ray scattering (SAXS). Four kinds of cationic liposomes were used. The first binary lipid mixture was made of the cationic lipid (3'[N-(N',N'-dimethylaminoethane)-carbamoyl]cholesterol (DC-Chol) and the neutral helper lipid dioleoylphosphocholine (DOPC) (DC-Chol/DOPC liposomes), the second one of the cationic 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and the neutral dioleoylphosphatidylethanolamine (DOPE) (DOTAP/DOPE liposomes), the third one of DC-Chol and DOPE (DC-Chol/DOPE liposomes), and the fourth one of DOTAP and DOPC (DOTAP/DOPC liposomes). Upon DNA-induced fusion of liposomes, large lipid mixing at the molecular level occurs. As a result, highly organized mixed lipoplexes spontaneously form with membrane properties intermediate between those of starting liposomes. By varying the composition of lipid dispersions, different DNA packing density regimes can also be achieved. Furthermore, occurring lipid mixing was found to induce hexagonal to lamellar phase transition in DOTAP/DOPE membranes. Molecular mechanisms underlying experimental findings are discussed.     

Surface-dependent transitions during self-assembly of phospholipid membranes on mica, silica, and glass

Formation of supported membranes by exposure of solid surfaces to phospholipid vesicles is a much-used technique in membrane research. Freshly cleaved mica, because of its superior flatness, is a preferred support, and we used ellipsometry to study membrane formation kinetics on mica. Neutral dioleoyl-phosphatidylcholine (DOPC) and negatively charged dioleoyl-phosphatidylserine/dioleoyl-phosphatidylcholine (20% DOPS/80% DOPC) vesicles were prepared by sonication. Results were compared with membrane formation on silica and glass, and the influence of stirring, buffer, and calcium was assessed. Without calcium, DOPC vesicles had a low affinity (Kd approximately 30 microM) for mica, and DOPS/DOPC vesicles hardly adsorbed. Addition of calcium promptly caused condensation of the adhering vesicles, with either loss of excess lipid or rapid additional lipid adsorption up to full surface coverage. Vesicle-mica interactions dominate the adsorption process, but vesicle-vesicle interactions also seem to be required for the condensation process. Membranes on mica proved unstable in Tris-HCl buffer. For glass, transport-limited adsorption of DOPC and DOPS/DOPC vesicles with immediate condensation into bilayers was observed, with and without calcium. For silica, vesicle adsorption was also rapid, even in the absence of calcium, but the transition to condensed layers required a critical surface coverage of about 50% of bilayer mass, indicating vesicle-vesicle interaction. For all three surfaces, additional adsorption of DOPC (but not DOPS/DOPC) vesicles to condensed membranes was observed. DOPC membranes on mica were rapidly degraded by phospholipase A2 (PLA2), which pleads against the role of membrane defects as initial PLA2 targets. During degradation, layer thickness remained unchanged while layer density decreased, in accordance with recent atomic force microscopy measurements of gel-phase phospholipid degradation by PLA2.     

Entropic stabilization and equilibrium size of lipid vesicles

We have studied the phase behavior of zwitterionic phospholipid dioleoylphosphatidylcholine (DOPC) vesicles (membranes) and interpreted our results using scaling arguments in combination with molecular realistic self-consistent field (SCF) calculations. DOPC membranes acquire a partial negative charge per lipid molecule at intermediate NaBr concentrations. As a result of this, dilute DOPC solutions form stable unilamellar vesicles. Both at low and high salt concentrations phase separation into a lamellar and a vesicular phase is observed. The vesicle radius decreases as a power law with decreasing lipid concentration. This power-law concentration dependence indicates that the vesicle phase is entropically stabilized; the size of the DOPC vesicles result from a competition between the bending energy and translation and undulation entropy. This scaling behavior breaks down for very small vesicles. This appears to be consistent with SCF predictions that point to the fact that in this regime the mean bending modulus kc increases with curvature. The SCF theory predicts that, at low ionic strength, the membrane stability improves when there is more charge on the lipids. Upon a decrease of the ionic strength, lipids with a full negative charge form vesicles that grow exponentially in size because the mean bending modulus increases with decreasing ionic strength. At the same time the Gaussian bending modulus becomes increasingly negative such that the overall bending energy tends to zero. This indicates that small micelles become the dominant species. The SCF theory thus predicts a catastrophic break down of giant vesicles in favor of small micelles at sufficiently low ionic strength and high charge density on the lipids.     

Selective adhesion of endothelial cells to artificial membranes with a synthetic RGD-lipopeptide

A constrained cyclic ArgGly-Asp-D-Phe-Lys, abbreviated as cyclo(-RGDfK-), lipopeptide has been synthesized and incorporated into artificial membranes such as giant vesicles with DOPC and solid-supported lipid bilayers. The selective adhesion and spreading of endothelial cells of the human umbilical cord on solids functionalized by membranes with this RGD-lipopeptide have been observed. Furthermore, we have demonstrated strong selective adhesion of giant vesicles to endothelial cells through local adhesion domains by combined application of hydrodynamic flow field and reflection interference contrast microscopy (RICM). The adhesion can be inhibited by competition with a water-soluble RGD peptide. We suggest that this strategy could improve the efficiency of liposomes targeting used as vectors or as drug carriers to cells.     

Activity of synthetic ion channels is influenced by cation-pi interactions with phospholipid headgroups

A suite of synthetic hydraphile ion channels has been used to probe the possibility of cation-pi interactions between the channel and the phospholipid bilayer. The hydraphiles selected for this study contained either no sidearm, aliphatic sidearms or aromatic sidearms that varied in electron-richness. An ion selective electrode (ISE) method was used to evaluate the ion transport ability of these hydraphiles across synthetic bilayers. Transport was dependent on sidearm identity. Ion transport activity for the aromatic sidechained compounds was greatest when the sidearms were electron rich and vesicles were prepared from 100% DOPC (trimethylammonium cation headgroup, overall neutral). When the lipid headgroups were made more negative by changing the composition from DOPC to 70 : 30 (w/w) DOPC : DOPA, transport by the aromatic-sidechained channels was reduced. Fluorescence studies showed that when the lipid composition changed, the headgroups experienced a different polarity, suggesting reorientation. The data are in accord with a stabilizing cation-pi interaction between the aromatic sidearm of the hydraphile channel and the ammonium phospholipid headgroup.     

Glass Microsphere‐Supported Giant Vesicles for the Observation of Self‐Reproduction of Lipid Boundaries

Growth and division experiments on phospholipid boundaries were carried out using glass microsphere‐supported phospholipid (DOPC) giant vesicles (GVs) fed with a fatty acid solution (oleic acid) at two distinct feeding rates. Both fast and slow feeding methods produced daughter GVs. Under slow feeding conditions the membrane growth process (evagination, buds, filaments) was observed in detail by fluorescence microscopy. The density difference between supported mother vesicles and newly formed daughter vesicles allowed their easy separation. Mass spectrometric analysis of the resulting mother and daughter GVs showed that the composition of both vesicle types was a mixture of original supported phospholipids and added fatty acids reflecting the total composition of amphiphiles after the feeding process. Thus, self‐reproduction of phospholipid vesicles can take place under preservation of the lipid composition but different aggregate size.     

Block liposomes from curvature-stabilizing lipids: connected nanotubes, -rods, or -spheres

We report on the discovery of block liposomes, a new class of chain-melted (liquid) vesicles, with membranes comprised of mixtures of the membrane-curvature-stabilizing multivalent lipid MVLBG2 of colossal charge +16 e and neutral 1,2-dioleoyl-sn-glycero-3-phosphatidylcholine (DOPC). In a narrow MVLBG2 composition range (8-10 mol%), cryo-TEM revealed block liposomes consisting of distinctly shaped, yet connected, nanoscale spheres, pears, tubes, or rods. Unlike typical liposome systems, where spherical vesicles, tubular vesicles, and cylindrical micelles are separated on the macroscopic scale, within a block liposome, shapes are separated on the nanometer scale. Diblock (pear-tube) and triblock (pear-tube-pear) liposomes contain nanotubes with inner lumen diameter of 10-50 nm. Diblock (sphere-rod) liposomes were found to contain micellar nanorods approximately 4 nm in diameter and several micrometers in length, analogous to cytoskeletal filaments of eukaryotic cells. Block liposomes may find a range of applications in chemical and nucleic acid delivery and as building blocks in the design of templates for hierarchical structures.     

Formation of tubules and giant vesicles from large multilamellar vesicles

This study reports an observation of submicrometer multilamellar vesicles (MLVs) prepared by simply freeze-thawing a phospholipid dispersion at full hydration that transformed into giant vesicles (GVs) and tubules (TUs) when confined between microscope glass slides. Cover slide cleaning and surface treatment did not hamper the formation of GVs or TUs. However, when small unilamellar vesicles (SUV) were prepared or when MLVs were not confined but rather freely moved between the glass slides or when the phospholipid was in its gel phase, neither GVs nor TUs were observed. Altogether, our results suggested that MLVs would play a role as a lipid reservoir and that the liquid flow between the glass slides induces the peeling of the external bilayers, yielding the formation of tubules and giant unilamellar vesicles.     

Anion transport properties of amine and amide-sidechained peptides are affected by charge and phospholipid composition

Four synthetic anion transporters (SATs) having the general formula (n-C(18)H(37))(2)N-COCH(2)OCH(2)CO-(Gly)(3)Pro-Lys(epsilon-N-R)-(Gly)(2)-O-n-C(7)H(15) were prepared and studied. The group R was Cbz, H (TFA salt), t-Boc, and dansyl in peptides 1, 2, 3, and 4 respectively. The glutamine analog (GGGPQAG sequence) was also included. A dansyl-substituted fluorescent SAT was used to probe peptide insertion; the dansyl sidechain resides in an environment near the bilayer's midpolar regime. When the lysine sidechain was free or protected amine, little effect was noted on final Cl(-) transport rate in DOPC : DOPA (7 : 3) liposomes. This stands in contrast to the significant retardation of transport previously observed when a negative glutamate residue was present in the peptide sequence. It was also found that Cl(-) release from liposomes depended on the phospholipid composition of the vesicles. Chloride transport diminished significantly for the free lysine containing SAT, 2, when the lipid was altered from DOPC : DOPA to pure DOPC. Amide-sidechained SATs 1 and 5 showed a relatively small decrease in Cl(-) transport. The effect of lipid composition on Cl(-) transport was explained by differences in electrostatic interaction between amino acid sidechain and lipid headgroup, which was modeled by computation.     

Lipid bilayer elasticity measurements in giant liposomes in contact with a solubilizing surfactant

A new method to probe the modification of the elasticity of phospholipid bilayers is presented. The purpose here concerns the action of a solubilizing surfactant on a vesicle bilayer. This method is based on the measure of the under-field elongation of giant magnetic-fluid-loaded liposomes. The addition of the nonionic surfactant octyl-beta-d-glucopyranoside (OG) to vesicles at sublytic levels increases the elasticity of the membrane, as shown by the value of the bending modulus K(b), which decreases. K(b) measured around 20 kT for a pure 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) bilayer indeed reaches a few kT in the case of the mixed OG-DOPC bilayer. The purpose and interest of this study are to allow the determination of the membrane bending modulus before and after the addition of OG on the same magnetic liposome. Moreover, the experimental conditions used in this work allow the control of lipid and surfactant molar fractions in the mixed aggregates. Then, optical microscopy observation can be performed on samples in well-defined regions of the OG-phospholipid state diagram.     

Properties of mixed lipid monolayers assembled on hydrophobic surfaces through vesicle adsorption

Supported lipid films are becoming increasingly important tools for the study of membrane protein function because of the availability of high-sensitivity surface analytical and patterning techniques. In this study, we have characterized the physical chemical properties of lipid films assembled on hydrophobic surfaces through the spontaneous adsorption of large unilamellar lipid vesicles composed of dioleoylphosphatidylglycerol (DOPG) and dioleoylphosphatidylcholine (DOPC). The density of the lipid films was measured with surface plasmon resonance spectroscopy as the lipid composition of the vesicles and ionic concentration were varied. As expected, monolayer films were formed, but the density of the monolayers was found to be weakly dependent on the lipid composition of the vesicles and strongly dependent on the ionic concentration of the solution in contact with the monolayer. Atomic force microscopy (AFM) images of the lipid films indicate that they are composed of a homogeneous monolayer. Surface force measurements were used to determine the surface charge and DOPG density of the monolayers. The DOPG content of the films was found to be weakly dependent on the DOPG composition of the vesicles and strongly dependent on the salt concentration of the environment. A model has been developed to describe the behavior of the lipid composition of the films in terms of the hydrophobic, electrostatic, and steric forces acting on the lipid monolayer on the hydrophobic surface.     

Silica supported phospholipid layers doped with GM1: A comparison between different methods

A method to coat hydrophobic surfaces with lipid molecules in a reproducible manner and in which the lipid molecules are resistant to detergent washings, would benefit the development of new ELISA assays. This work presents different approaches to build 1,2-dioleolyl-sn-glycero-3-phosphocholine (DOPC) layers doped with a monosialoganglioside (GM1) supported on silica surfaces, which are stable toward buffer rinsing and washing with surfactant (Tween 20). The three methods employed were: method 1, coadsorption of DOPC:GM1 (0-10 mol%) with the surfactant n-dodecyl-beta-D-maltoside (DDM) from micellar solutions, with successive adsorption and rinsing steps; method 2, vesicle fusion from DOPC: GM1 (0-10 mol%) liposomes; and method 3, deposition of GM1 from organic solvent (chloroform) and exposure to an aqueous environment (hydration method). The vesicle fusion method was also tested in polystyrene surfaces. Cholera toxin subunit B (CTB) was used to detect the presence of GM1 on the formed layers. The results indicated that the vesicle fusion was the only method that was successful in creating stable mono- and bilayers onto hydrophobized and hydrophilic silica, respectively. The mixed micellar solution method was suitable for creating pure lipid (DOPC) monolayers but the incorporation of GM1 in the micelles led to monolayers which were very unstable with respect to buffer rinsing. The hydration method led to monolayers of GM1 that were partly rinsed off by a continuous buffer flow. Adsorption of CTB was found to be proportional to the amount of GM1 present in the liposomes. The amount of CTB adsorbed onto the lipid bilayers was roughly the double as the one determined on the monolayers with the same liposome compositions. The vesicle fusion method was also able to create monolayers of pure DOPC and DOPC:10 mol% GM1 on the polystyrene surfaces.     

Giant vesicles formed by gentle hydration and electroformation: a comparison by fluorescence microscopy

Giant unilamellar vesicles (diameter of a few tens of micrometers) are commonly produced by hydration of a dried lipidic film. After addition of the aqueous solution, two major protocols are used: (i) the gentle hydration method where the vesicles spontaneously form and (ii) the electroformation method where an ac electric field is applied. Electroformation is known to improve the rate of unilamellarity of the vesicles though it imposes more restricting conditions for the lipidic composition of the vesicles. Here we further characterize these methods by using fluorescence microscopy. It enables not only a sensitive detection of the defects but also an evaluation of the quantity of lipids in these defects. A classification of the defects is proposed and statistics of their relative importance in regard to both methods and lipid composition are presented: it shows for example that 80% of the vesicles obtained by electroformation from 98% 1,2-dioleoyl-sn-glycero-3-phosphocholine are devoid of significant defects against only 40% of the vesicles with the gentle hydration method. It is also shown that the presence of too many negatively charged lipids does not favor the formation of unilamellar vesicles with both methods. For the gentle hydration, we checked if the negatively charged lipids were inserted in the vesicles membrane in the same proportion as that of the lipid mixture from which they are formed. The constant incorporation of a negatively charged labeled lipid despite an increasing presence of negatively charged 1,2-dioleoyl-sn-glycero-3-[phospho-l-serine] tends to confirm that the composition of vesicles is indeed close to that of the initial mixture.     

Lipid diffusion in giant unilamellar vesicles is more than 2 times faster than in supported phospholipid bilayers under identical conditions

The lateral diffusion coefficients of a BODIPY tail-labeled lipid in two model systems, namely, free-standing giant unilamellar vesicles (GUVs) and supported phospholipid bilayers (SPBs), were determined by fluorescence correlation spectroscopy (FCS) using the Z-scan approach. For the first time, the performed measurements on 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) bilayers maintain exactly the same experimental conditions for both systems, which allows for a quantitative comparison of lipid diffusion in these two commonly used model membranes. The results obtained revealed that the lipid mobility in free-standing bilayers (D=7.8+/-0.8 microm2 s-1) is significantly higher than in the bilayer created on the solid support (mica) (D=3.1+/-0.3 microm2 s-1).     

Headgroup hydration and mobility of DOTAP/DOPC bilayers: a fluorescence solvent relaxation study

The biophysical properties of liposome surfaces are critical for interactions between lipid aggregates and macromolecules. Liposomes formed from cationic lipids, commonly used to deliver genes into cells in vitro and in vivo, are an example of such a system. We apply the fluorescence solvent relaxation technique to study the structure and dynamics of fully hydrated liquid crystalline lipid bilayers composed of mixtures of cationic dioleoyltrimethylammoniumpropane (DOTAP) and neutral dioleoylphosphatidylcholine (DOPC). Using three different naphthalene derivatives as fluorescent dyes (Patman, Laurdan and Prodan) allowed different parts of the headgroup region to be probed. Wavelength-dependent parallax quenching measurements resulted in the precise determination of Laurdan and Patman locations within the DOPC bilayer. Acrylamide quenching experiments were used to examine DOTAP-induced dye relocalization. The nonmonotonic dependence of dipolar relaxation kinetics (occurring exclusively on the nanosecond time scale) on DOTAP content in the membrane was found to exhibit a maximum mean solvent relaxation time at 30 mol % of DOTAP. Up to 30 mol %, addition of DOTAP does not influence the amount of bound water at the level of the sn(1) carbonyls, but leads to an increased packing of phospholipid headgroups. Above this concentration, elevated lipid bilayer water penetration was observed.     

Electroformation of giant liposomes from spin-coated films of lipids

This paper describes spin-coating of solutions of lipids and using the resulting thin films for electroformation of giant liposomes. Spin-coating made it possible to generate uniform films of lipids with controllable thickness over large surfaces (>25 cm(2)) of indium tin oxide. Establishing a range of thicknesses optimal for electroformation (25-50 nm), we demonstrate formation of giant liposomes from lipids (such as asolectin, phosphatidylserine, and phosphatidylglycerol) that do not readily form giant liposomes from traditional, droplet-derived films. We compared liposomes from a spin-coated film of lipids to liposomes formed from traditional droplet-derived films and found that spin-coated films produced larger (by factor of 2-5) and more abundant liposomes than droplet-derived films of lipids. Electroformation from spin-coated, homogenous lipid films of optimal thickness provided a reproducible way to obtain liposomes with diameters that are predominantly larger than 30 microm over the entire surface of formation.     

Epi-fluorescence microscopic characterization of potential-induced changes in a DOPC monolayer on a Hg drop

Characterization of the potential-induced changes of a lipid-coated Hg-0.1 M KCl interface through electrochemical techniques and newly developed in situ fluorescence microscopy is described. Fluorescence of a fluorophore-containing dioleoyl phosphatidylcholine (DOPC) layer deposited from the gas-solution interface was observed to be dependent upon the potential of the Hg surface. The largest changes occurred for potentials where the lipid layer was desorbed: the lipid moved away from the electrode surface, reducing the efficiency of metal-mediated quenching of the excited state resulting in an increase in fluorescence. Electric potential-induced changes in the morphology of the adsorbed or desorbed DOPC lipid monolayer were observed optically for the first time using this technique. The observed potential-dependent fluorescence was compared to previous studies on an octadecanol-coated Au(111) electrode. Fluorescence microscopy was also used to characterize the fusion of DOPC liposomes with a previously adsorbed DOPC layer. Large changes in fluorescence were observed for the DOPC layer after fusion with liposomes. The fusion was accomplished via potential-created defects in the adsorbed DOPC monolayer through which the liposomes interact. The integration of the liposomes into the adsorbed monolayer results in a hybrid layer in which some lipid exists further from the electrode surface, resulting in a large increase in fluorescence. Possibilities for the creation of a biomimetic adsorbed hybrid lipid layer on Hg are also discussed.     

Fluorescence lifetime correlation spectroscopy combined with lifetime tuning: new perspectives in supported phospholipid bilayer research

A new concept based on fluorescence lifetime correlation spectroscopy (FLCS) is presented allowing the simultaneous determination of diffusion coefficients of identical molecules located in different environments. The difference in fluorescence lifetimes, which is the main prerequisite for FLCS, is reached by locating one population of the dye close to a light-absorbing surface. Since such surfaces quench fluorescence, the fluorescence lifetime of chromophores located close to these surfaces can be tuned in a specific manner. This approach has been demonstrated for a BODIPY-tail-labeled lipid in supported phospholipid bilayers (SPBs) as well as in phospholipid multilayers adsorbed onto solid supports. In particular, the effect of the solid support type on the fluorescence lifetime as well as its dependence on the BODIPY-support distance has been characterized and verified by theoretical considerations based on precise determination of refractive indices of the used supports. While the fluorescence lifetime of BODIPY dye is 5.6 ns in small unilamellar vesicles (SUVs) composed of 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) and 1,2-dioleoyl-sn-glycero-3-[phospho-L-serine] (DOPS), the lifetime is 1.8 ns in DOPC/DOPS SPBs adsorbed onto ITO-covered glass or 3.0 ns in a DOPC/DOPS monolayer adsorbed onto seven 1,2-dipalmitoyl-sn-glycero-3-phosphate (DPPA) layers on oxidized silicon. Using these particular systems, we demonstrated that FLCS enables one to characterize simultaneously two-dimensional lipid diffusion in the planar lipid layers and three-dimensional vesicle diffusion in bulk above the lipid layers using single dye labeling. The autocorrelation functions obtained by this new approach do agree with those obtained by standard FCS on isolated SPBs or vesicles. Possible applications of this virtual two-channel measurement using single dye labeling as well as one detection channel are discussed.