Mesoporous Materials Promoting Direct Electrochemistry and Electrocatalysis of Horseradish Peroxidase

The direct electron transfer and electrocatalysis of horseradish peroxidase (HRP) immobilized on hexagonal mesoporous silicas (HMS) matrix was studied. The interaction between HRP and HMS was examined by using Fourier transform infrared spectroscopy, nitrogen adsorption isotherms and electrochemical methods. The immobilized HRP at a modified glassy carbon electrode showed a good direct electrochemical behavior, which depended on the specific properties of the HMS. Two couples of redox peaks corresponding to Fe(III) to Fe(II) conversion of the HRP intercalated in the mesopores and adsorbed on the external surface of the HMS were observed with the formal potentials of ?0.315 and ?0.161 V in 0.1 M pH 7.0 PBS, respectively. The amount of HRP intercalated in the mesopores of HMS proved to be related to the pore size. The HRP intercalated in the mesopores showed a surface controlled electrode process with a single proton transfer. The immobilized HRP displayed an excellent electrocatalytic response to the reduction of hydrogen peroxide (H₂O₂) without the aid of an electron mediator. The HMS provided a novel matrix for protein immobilization and direct electron transfer study of the immobilized protein.     

Dendritic Silver/Silicon Dioxide Nanocomposite Modified Electrodes for Electrochemical Sensing of Hydrogen Peroxide

A novel biosensor for hydrogen peroxide was prepared by immobilizing horseradish peroxidase (HPR) on newly synthesized dendritic silver/silicon dioxide nanocomposites, which were coated on a glassy carbon electrode. The modified electrode was characterized with XPS, SEM, and electrochemical methods. This biosensor showed a very fast amperometric response to hydrogen peroxide with a linear range from 0.7 to 120 μM, a limit of detection of 0.05 μM and a sensitivity of 1.02 mA mM^?1 cm^?2. The Michaelis‐Menten constant of the immobilized HRP was estimated to be 0.21 mM, indicating a high affinity of the HRP to H₂O₂ without loss of enzymatic activity. The preparation of the proposed biosensor was convenient, and it showed high sensitivity and good stability.     

An amperometric biosensor based on the coimmobilization of horseradish peroxidase and methylene blue on a beta-type zeolite modified electrode

A new biosensor for the amperometric detection of hydrogen peroxide was developed based on the coimmobilization of horseradish peroxidase (HRP) and methylene blue on a beta-type zeolite modified glassy carbon electrode without the commonly used bovine serum albumin-glutaraldehyde. The intermolecular interaction between enzyme and zeolite matrix was investigated using FT-IR. The cyclic voltammetry and amperometric measurement demonstrated that methylene blue co-immobilized with HRP in this way displayed good stability and could efficiently transfer electrons between immobilized HRP and the electrode. The sensor responded rapidly to H2O2 in the linear range from 2.5 x 10(-6) to 4.0 x 10(-3) M with a detection limit of 0.3 microM. The sensor was stable in continuous operation.     

Amperometric hydrogen peroxide biosensor based on horseradish peroxidase-labeled nano-Au colloids immobilized on poly(2,6-pyridinedicarboxylic acid) layer by cysteamine.

A sensitive hydrogen peroxidase (H2O2) amperometric sensor based on horseradish peroxidase (HRP)-labeled nano-Au colloids has been proposed. Nano-Au colloids were immobilized by the thiol group of cysteamine, which was associated with the carboxyl groups of poly(2,6-pyridinedicarboxylic acid) (PPDA). With the aid of the hydroquinone, the sensor displayed excellent electrocatalytical response to the reduction of H2O2. Compared with the non-Au-colloid modified electrode, i.e., PPDA/HRP, the Au-colloid modified electrode exhibited better performance characteristics, including stability, reproducibility, sensitivity and accuracy. The biosensor shows a linear response to H2O2 in the range of 3.0 x 10(-7) - 2 x 10(-3) M. The detection limit was 1.0 x 10(-7) M.     

A simplified enzyme-based fiber optic sensor for hydrogen peroxide and oxidase substrates

A simplified enzyme-based fiber optic sensor system has been developed for selective determination of hydrogen peroxide. Horseradish peroxidase (HRP) is immobilized on bovine albumin matrix with glutaraldehyde. A new fluorimetric substrate, thiamine is used to indicate the sensing process. Under optimized condition the measuring range of sensor is up to 1 x 10(-4)M hydrogen peroxide with a limit of detection of 5 x 10(-7)M in a 5 min response period. It can be easily incorporated in multienzyme sensors for biochemical substances which produce hydrogen peroxide under catalytic oxidation by their oxidase. This possibility has been tested for the determination of uric acid, D-amino acid, L-amino acid, glucose cholesterol, choline and acetylcholine, respectively, using a membrane with co-immobilized oxidase and horseradish peroxidase.     

A Novel Hydrogen Peroxide Biosensor Based on Adsorption of Horseradish Peroxidase onto a Nanobiomaterial Composite Modified Glassy Carbon Electrode

In this work, a novel hydrogen peroxide biosensor derived from maize tassel (MT) and multiwalled carbon nanotube (MWCNT) composite was used to adsorb horseradish peroxidase (HRP) onto the surface of a glassy carbon electrode through electrostatic interactions. The morphology and structure of the products were characterized by SEM, FTIR and UV‐visible spectroscopy. The electrochemical and electrocatalytic performance of the HRP/MT‐MWCNT/GCE was studied using voltammetric and amperometric methods. The amperometric response of the biosensor varied linearly with concentration of H₂O₂ from 9 µM to 1 mM with detection limit of 4.0 µM (S/N=3). Furthermore, the biosensor exhibited good reproducibility and stability.     

TiO2 sol-gel derived amperometric biosensor for H2O2 on the electropolymerized phenazine methosulfate modified electrode

A novel hydrogen peroxide biosensor was developed based on the immobilization of horseradish peroxidase (HRP) in a TiO(2) sol-gel matrix on an electropolymerized phenazine methosulfate (PMS) modified electrode surface. Such membranes are of interest due to their high surface area, biological compatibility, and ease of fabrication. HRP entrapped in the TiO(2) matix was stable and retained its activity to a large extent. Cyclic voltammetry and amperometric measurements were employed to demonstrate the feasibility of electron transfer between immobilized HRP and the glassy carbon electrode via electropolymerized PMS. The influence of various experimental parameters such as operating potential, pH, temperature, and stability was investigated for optimum analytical performance. The biosensor provided a wide linear calibration range from 4.0x10(-6) M to 1.0x10(-3) M, with a detection limit of 8.0x10(-7) M at a signal-to-noise ratio of 3. The sensor retained 80% of its original activity after two months of operation.     

基于石墨烯基复合物和聚天青Ⅰ的HRP传感器检测有机过氧化物的研究

利用电化学还原氧化石墨烯(GO)的方法将石墨烯(rGO)固定在电极表面上,然后电沉积氢氧化铜和氢氧化镍复合物,构成石墨烯/金属氢氧化物复合纳米材料修饰的玻碳电极(GCE),并通过电聚合天青Ⅰ将辣根过氧化酶(HRP)固定在GCE/rGO/Cu(OH)_2-Ni(OH)_2表面,制得GCE/rGO/Cu(OH)_2-Ni(OH)_2/HRP-PA。对石墨烯/金属氢氧化物复合纳米材料进行了SEM和能谱表征。通过电化学阻抗法和循环伏安法对传感器的制备过程和电化学性能进行了研究,并进一步分别对过氧化氢叔丁基(BHP)及过氧化氢异丙苯(CHP)进行了分析测定。该传感器对BHP和CHP具有良好的检测效果,在2.0×10~(-5)~9.2×10~(-4)mol/L范围内响应电流与BHP浓度呈良好的线性关系,检出限为9.9×10~(-6)mol/L;在3.0×10~(-6)~1.0×10~(-4)mol/L范围内响应电流与CHP浓度呈良好的线性关系,检出限为6.9×10~(-7)mol/L。     

Aluminum electrode modified with manganese hexacyanoferrate as a chemical sensor for hydrogen peroxide

A chemically modified electrode was fabricated based on manganese hexacyanoferrate (MnHCF) film. The MnHCF was used as a modifier immobilized onto an aluminum electrode. Stability of the electroactive film formed on the Al electrode surface indicated that MnHCF is a suitable material for the preparation of modified electrodes. The analytical applicability of the modified electrode for the determination of hydrogen peroxide was examined. A linear response in concentration range of 6.0x10(-7)-7.4x10(-3) M (r=0.9997) was obtained with detection limit of 2.0x10(-7) M for the determination of hydrogen peroxide. The modified electrode exhibited a good selectivity for H(2)O(2) in real samples. The mentioned electrode has advantages of being highly stable, sensitive, inexpensive, ease of construction and use.     

Reagentless enzyme electrode based on phenothiazine mediation of horseradish peroxidase for subnanomolar hydrogen peroxide determination

The development and characterization of a highly sensitive enzyme immobilized carbon based electrode for the determination of subnanomolar concentrations of hydrogen peroxide in aqueous samples is described. The biosensor consists of horseradish peroxidase (HRP) immobilized in solid carbon paste along with a suitable redox mediator. The latter allows the acceleration of the electroreduction of HRP in the presence of hydrogen peroxide. Several phenothiazines as mediators are investigated in a comparative manner and with respect to dimethylferrocene using cyclic voltammetry and amperometry. Insolubilization of the HRP in the solid carbon paste is achieved by cross-linking the enzyme with glutaraldehyde and bovine serum albumin. Several experimental parameters such as pH, mediator and enzyme content are considered. The hydrogen peroxide determination is better carried out in 0.1 M acetate buffer, pH 4.5, by amperometry at an applied potential of 0.0 V versus Ag/AgCl, 3 M NaCl concentration and by using the phenothiazine base as redox mediator. The biosensor response is linear over the concentration range 2 nM-10 microM with a detection limit of 1 nM. The linear range of the hydrogen peroxide response without a mediator in the biosensor is found between 2 and 40 microM. The biosensor can be used for more than 180 measurements. Additional modification of the electrode by incorporation of Nafion SAC-13 microparticles in the solid carbon paste allows detection of concentrations of hydrogen peroxide as low as 0.1 nM.     

A novel biosensor for specific determination of hydrogen peroxide: catalase enzyme electrode based on dissolved oxygen probe

A biosensor for the specific determination of hydrogen peroxide was developed using catalase (EC 1.11.1.6) in combination with a dissolved oxygen probe. Catalase was immobilized with gelatin by means of glutaraldehyde and fixed on a pretreated teflon membrane served as enzyme electrode. The electrode response was maximum when 50 mM phosphate buffer was used at pH 7.0 and at 35 degrees C. The biosensor response depends linearly on hydrogen peroxide concentration between 1.0x10(-5) and 3.0x10(-3) M with a response time of 30 s. The sensor is stable for >3 months so in this period >400 assays can be performed.     

Electrocatalytic Activity of Nanocomposites of Sulphur Doped Graphene Oxide and Nanosized Cobalt Phthalocyanines

In this work we explore the electrocatalytic activity of nanocomposites of reduced sulphur doped graphene oxide nanosheets (rSDGONS) and cobalt phthalocyanine (CoPc) or cobalt tetra amino phthalocyanine (CoTAPc) towards hydrogen peroxide. Transmission electron microscopy, scanning electron microscopy, X‐ray photon spectroscopy, X‐ray diffraction, chronoamperometry, linear scan voltammetry and cyclic voltammetry were used to characterize the nanocomposites. Nanosized CoPc showed superior (in terms of currents) electrocatalytic oxidation and reduction of hydrogen peroxide compared to CoTAPc nanoparticles (CoTAPc NP ). The lowest detection limit was obtained for hydrogen peroxide oxidation on electrodes modified with CoPc NP ‐rSDGONS at 1.49 µM. The same electrode gave a high adsorption equilibrium constant of 1.27×10³ mol^?1 and a Gibbs free energy of ?17.71 kJ/mol, indicative of a spontaneous reaction on the electrode surface.     

Poly(o-aminophenol)-modified bienzyme carbon paste electrode for the detection of uric acid

A reagentless uric acid selective biosensor constructed by immobilising uricase and horseradish peroxidase (HRP) in carbon paste without the addition of an electron transfer mediator is described. The response of the electrode is based on the enzymatic reduction of hydrogen peroxide in the presence of uric acid. Uricase and HRP were dispersed in the carbon paste and the optimum paste mixture was determined. Poly(o-aminophenol) was electropolymerised at the working surface area of the electrode acting as a conducting polymer layer. Cyclic voltammetry was used to characterise the permselective characteristics of the polymer layer. At an applied potential of 50 mV vs. Ag/AgCl, a linear response was obtained up to 1 x 10(-4) M, with a limit of detection of 3 x 10(-6) M. The sensor had a response time of 37 s. a calibration precision of 2.2% (n = 4) and an estimated sample frequency of 20 h(-1). Responses to the analyte of interest were pH dependent. The sensor was incorporated into a flow injection system for the qualification of uric acid in human serum. Results compared favourably with a standard spectrophotometric method.     

Enzyme-functionalized gold nanowires for the fabrication of biosensors

Gold nanowires were prepared by an electrodeposition strategy using nanopore polycarbonate (PC) membrane, with the average diameter of the nanowires about 250 nm and length about 10 microm. The nanowires prepared were dispersed into chitosan (CHIT) solution and stably immobilized onto glassy carbon electrode (GCE) surface. The electrochemical behavior of gold nanowire modified electrode and its application to the electrocatalytic reduction of hydrogen peroxide (H(2)O(2)) were investigated. The modified electrode allows low potential detection of hydrogen peroxide with high sensitivity and fast response time. Moreover, the good biocompatibility of nanometer-sized gold, the vast surface area of the nanowire-structure make it ideal for adsorption of enzymes for the fabrication of biosensors. Glucose oxidase was adsorbed onto the nanowire surface to fabricate glucose biosensor as an application example. The detection of glucose was performed in phosphate buffer (pH 6.98) at -0.2 V. The resulting glucose biosensor exhibited sensitive response, with a short response time (<8 s), a linear range of 10(-5)-2 x 10(-2) M and detection limit of 5 x 10(-6) M.     

Layered Zirconium(IV) Aminoethylphosphonate Intercalated with Horseradish Peroxidase for an Amperometric Biosensor

Layered zirconium(IV) aminoethylphosphonate (ZrAEP) have been used as matrices for immobilization of horseradish peroxidase (HRP) to fabricate enzyme electrode for an amperometric biosensor. The biocompatible HRP–ZrAEP films were fabricated on gold electrode surface by electro‐co‐deposition method. The morphology of the HRP–ZrAEP composite was characterized by scanning electron microscopy (SEM). UV–vis spectroscopy indicated that the intercalated HRP retained its native structure after incorporation in the ZrAEP. The immobilized HRP at the HRP–ZrAEP films exhibited good electro catalytic responses to the reduction of hydrogen peroxide. The response time of the biosensor was less than 3 s, and the linear range is from 2.5 × 10^?6 to 3.22 × 10^?3 M, with a detection limit of 7.0 × 10^?7 M (S/N = 3). The Michaelis–Menten constant (K^app_M) value is estimated to be 2.21 mM. In addition, the obtained biosensor possesses high sensitivity, good stability and reproducibility.     

Mediatorless Hydrogen Peroxide Biosensor Based on Horseradish Peroxidase Immobilized on 4‐Carboxyphenyl Film Electrografted on Gold Electrode

A novel method to fabricate a third‐generation hydrogen peroxide biosensor was reported. The electrode was first derivatized by electrochemical reduction of in situ generated 4‐carboxyphenyl diazonium salt (4‐CPDS) in acidic aqueous solution yielded stable 4‐carboxyphenyl (4‐CP) layer. The horseradish peroxidase (HRP) enzyme was then covalently immobilized by amidation between NH₂ terminus of enzyme and COOH terminus of 4‐CP film making use of the carbodiimide chemistry. Electrodeposition conditions used to control electrode functionalization density and film electron transfer kinetics were assessed by chronoamperometry and electrochemical impedance spectroscopy. The immobilized HRP displayed excellent electrocatalytic activity towards the reduction of hydrogen peroxide (H₂O₂) without any mediators. The effect of various operational parameters was explored for optimum analytical performance. The reported biosensor exhibited fast amperometric response (within 5 s) to H₂O₂. The detection limit of the biosensor was 5 μM, and linear range was from 20 μM to 20 mM. Furthermore, the biosensor exhibited high sensitivity, good reproducibility, and long‐term stability.     

Amperometric hydrogen peroxide biosensor based on a glassy carbon electrode modified with polythionine and gold nanoparticles

We report on a novel hydrogen peroxide biosensor that was fabricated by the layer-by-layer deposition method. Thionine was first deposited on a glassy carbon electrode by two-step electropolymerization to form a positively charged surface. The negatively charged gold nanoparticles and positively charged horseradish peroxidase were then immobilized onto the electrode via electrostatic adsorption. The sequential deposition process was characterized using electrochemical impedance spectroscopy by monitoring the impedance change of the electrode surface during the construction process. The electrochemical behaviour of the modified electrode and its response to hydrogen peroxide were studied by cyclic voltammetry. The effects of the experimental variables on the amperometric determination of H₂O₂ such as solution pH and applied potential were investigated for optimum analytical performance. Under the optimized conditions, the biosensor exhibited linear response to H₂O₂ in the concentration ranges from 0.20 to 1.6?mM and 1.6 to 4.0?mM, with a detection limit of 0.067?mM (at an S/N of 3). In addition, the stability and reproducibility of this biosensor was also evaluated and gave satisfactory results.

Hydrogen peroxide sensor based on horseradish peroxidase immobilized on a silver nanoparticles/cysteamine/gold electrode

A third-generation hydrogen peroxide biosensor was prepared by immobilizing horseradish peroxidase (HRP) on a gold electrode modified with silver nanoparticles. A freshly-cleaned gold electrode was first immersed in a cysteamine–ethanol solution, and then silver nanoparticles were immobilized on the cysteamine monolayer, and finally HRP was adsorbed onto the surfaces of the silver nanoparticles. This self-assemble process was examined via atomic force microscopy (AFM). The immobilized horseradish peroxidase exhibited an excellent electrocatalytic response toward the reduction of hydrogen peroxide. The linear range of the biosensor was 3.3 M to 9.4 mM, and the detection limit was estimated to be 0.78 M. Moreover, the biosensor exhibited a fast response, high sensitivity, good reproducibility, and long-term stability.     

固定化辣根过氧化物酶在有机/水混合溶液中的电化学

用魔芋多糖(KGM)将辣根过氧化物酶(HRP)固定在玻碳电极(GCE)表面, 制备了HRP-KGM膜修饰电极. 在乙醇等亲水性有机溶剂与水的混合溶液中, 包埋在KGM中的HRP 可以与电极发生直接电子传递, 且能催化还原过氧化氢、氢过氧化异丙基苯、氢过氧化叔丁基、过氧化丁酮等过氧化物. HRP-KGM膜修饰电极具有较好的稳定性和重现性, 可用于这些物质的定量检测.     

基于二氧化锆和碳纳米管协同作用的过氧化氢生物传感器

过氧化氢作为一种重要的化工产品在纺织行业、化工行业、造纸工业、环保行业、电子行业、食品卫生行业及其他领域得到广泛的应用~([1]).