Sensitive electrochemical detection of picloram utilising a multi-walled carbon nanotube/Cr-based metal-organic framework composite-modified glassy carbon electrode

This study describes the utilisation of a glassy carbon electrode modified with a composite of multi-walled carbon nanotube and Cr-based metal-organic framework (MIL-101, Cr-BDC, BDC = 1,4-benzenedicarboxylate) for the sensitive, simple and fast voltammetric determination of picloram in environmental samples. Under optimum conditions, additions of picloram using square wave voltammetry showed linear ranges of picloram concentrations from 24.15 to 3018 µg?L^?1 (0.1–12.5 μM) and from 3018 to 9658 µg?L^?1 (12.5–40 μM) with a detection limit of 14.49 µg?L^?1 (0.06 µM). The method was successfully applied to the determination of picloram in tap and river water samples spiked with picloram without any purification step by the standard addition method. The good recovery values obtained ranging from 97.5% to 105.0% revealed the reliability and accuracy of the method.     

Electrochemical oxidation behavior of methotrexate at DNA/SWCNT/Nafion composite film-modified glassy carbon electrode

Glassy carbon electrode modified with DNA-functionalized single-walled carbon nanotube (DNA/SWCNT) and Nafion composite film was developed for the detection of methotrexate. The characteristics of the modified electrode were examined by transmission electron microscopy and cyclic voltammetry. Compared with a bare glassy carbon electrode and Nafion- and SWCNT/Nafion-modified electrodes, the DNA/SWCNT/Nafion-modified one exhibited the more superior ability of detecting methotrexate, including the higher sensitivity and the lower overpotentials, due to the synergetic DNA-functionalized SWCNT and Nafion. Also, the dependence of the current on pH, nature of buffer, instrumental parameters, accumulation time, and potential was investigated to optimize the experimental conditions in the determination of methotrexate. Under the selected conditions, the modified electrode in pH?=?2.78 Britton–Robinson buffer solutions showed a linear voltammetric response to methotrexate within the concentration range of 2.0?×?10^?8–1.5?×?10^?6?mol?L^?1, with the detection limit of 8.0?×?10^?9?mol?L^?1. The method was also applied to detect methotrexate in medicinal tablets and spiked human blood serum samples.     

Sensitive voltammetric determination of tyrosine using multi-walled carbon nanotubes/4-aminobenzeresulfonic acid film-coated glassy carbon electrode

A chemically modified electrode is constructed based on the multi-walled carbon nanotubes (MWNTs)/4-aminobenzeresulfonic acid (4-ABSA) film-coated glassy carbon electrode. The electrocatalytic oxidation of tyrosine (Tyr) is investigated on the surface of the MWNTs/4-ABSA-modified electrode using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The prepared modified electrode shows voltammetric responses with high sensitivity and selectivity for Tyr in optimal conditions, which makes it very suitable for sub-micromolar detection of Tyr. A sensitive oxidation peak at +0.64 V is employed to determine Tyr. Good linear relationship between the oxidation peak current and the Tyr concentration in the range of 1 × 10⁻⁷ to 5 × 10⁻⁵ mol/L is obtained in phosphate buffer solution with pH 7.0. By use of modified electrode, the voltammetric detection limit for Tyr in DPV measurements is 8 × 10⁻⁸ mol/L (S/N = 3). Good sensitivity, selectivity and stability of the low-cost modified electrode make it very suitable for the determination of trace amounts of Tyr in pharmaceutical and clinical preparations.     

Electrochemical oxidation behavior of 8-azaguanine at graphene-Nafion composite film-modified glassy carbon electrode

A simple but highly sensitive electrochemical sensor for the determination of 8-azaguanine based on graphene-Nafion nanocomposite film-modified glassy carbon electrode (G-Nafion/GCE) was reported. The electrochemical behaviors of 8-azaguanine at G-Nafion/GCE were investigated by cyclic voltammetry (CV), square wave voltammetry (SWV), chronoamperometry (CA), and chronocoulometry (CC). The results showed that the electrochemical sensor exhibited excellent electrocatalytic activity to 8-azaguanine. 8-Azaguanine can be effectively accumulated at G-Nafion/GCE and produce a sensitive anodic peak, due to the synergetic functions of graphene and Nafion. Under the selected conditions, the modified electrode in pH 1.98 Britton-Robinson buffer solution showed a linear voltammetric response to 8-azaguanine within the concentration range of 5.0 × 10^?8～3.0 × 10^?5 mol L^?1, with the detection limit of 1.0 × 10^?8 mol L^?1. And, the method was also applied to detect 8-azaguanine in spiked human urine with wonderful satisfactory results.     

Electrooxidative behavior and determination of trifluoperazine at multiwalled carbon nanotube-modified glassy carbon electrode

The mechanism of electrochemical oxidation of trifluoperazine has been proposed on the basis of cyclic and differential pulse voltammetry at a multiwalled carbon nanotube-modified glassy carbon electrode. The modified electrode exhibits catalytic activity, high sensitivity, and stability. The oxidation process exhibited an adsorption-controlled behavior. Also, depending on this adsorption control, a sensitive electroanalytical method for the determination of trifluoperazine has been investigated by adsorptive stripping differential pulse voltammetry. Under the optional conditions, the anodic peak current was linear to the trifluoperazine concentration over the range of 2.08 10^?8?M to 1.67 10^?6?M, and the limit of detection was 7.49 10^?10?M. The modified electrode had good stability and repeatability, and it was successfully applied to the determination of trifluoperazine in pharmaceuticals.     

Sensitive voltammetric assay of etoposide using modified glassy carbon electrode with a dispersion of multi-walled carbon nanotube

A sensitive electroanalytical method for the determination of anticancer drug etoposide (ETP) using adsorptive stripping differential pulse voltammetry (AdSDPV) at a multi-walled carbon nanotube-modified glassy carbon electrode (MWCNT-modified GCE) is presented. The surface morphology of modified electrode was characterized by scanning electron microscopy. The effects of accumulation time and potential, pH, scan rate, and amount of MWCNT suspension were investigated. The calibration curve was linear in the concentration range of 2.0?×?10^?8–2.0?×?10^?6 M with the detection limit of 5.4?×?10^?9 M. The reproducibility of the peak current was found at 1.55 % (n?=?5) RSD value in pH 6.0 Britton–Robinson buffer for the MWCNT-modified GCE. The method was then successfully utilized for the determination of ETP in pharmaceutical dosage form, and a recovery of 99.55 % was obtained. The possible oxidation mechanism of ETP was also discussed. The proposed electroanalytical method using MWCNT-modified GCE is the most sensitive method for the determination of ETP with lowest limit of detection in the previously published electrochemical methods.     

Sensitive voltammetric sensor of dihydromyricetin based on Nafion/SWNT-modified glassy carbon electrode

A novel voltammetric sensor, based on single-walled carbon nanotubes (SWNT) dispersed in Nafion and modified glassy carbon electrode (GCE), was fabricated and used to determine the trace amounts of dihydromyricetin (DMY). The electrochemical behavior of DMY at this sensor was investigated in 0.1 mol L⁻¹ sulfuric acid solutions + 0.1 mol L⁻¹ NaCl by cyclic voltammetry and squarewave voltammetry. Compared with bare GCE, the electrode presented an excellent response of DMY through an adsorption-controlled quasi-reversible process. Under the optimum conditions, the response peak currents were linear relationship with the DMY concentrations in the range of 1.0 × 10⁻⁷–1.0 × 10⁻⁵ mol L⁻¹ with a detection limit of 9 × 10⁻⁸ mol L⁻¹. Based on this voltammetric sensor, a simple and sensitive electroanalytical method for DMY was proposed and applied to quantitative determination of DMY in Ampelopsis grossedentata samples. In addition, the oxidation mechanism was proposed and discussed, which could be a reference for the pharmacological action of DMY in clinical study.     

Surface-enhanced oxidation and detection of Sunset Yellow and Tartrazine using multi-walled carbon nanotubes film-modified electrode

The insoluble multi-walled carbon nanotubes (MWNT) was successfully dispersed into water in the presence of hydrophobic surfactant. After that, MWNT film-coated glassy carbon electrode (GCE) was achieved via dip-coating and evaporating water. Owing to huge surface area, high sorption capacity and subtle electronic properties, MWNT film exhibits highly efficient accumulation efficiency as well as considerable surface enhancement effects to Sunset Yellow and Tartrazine. As a result, the oxidation peak currents of Sunset Yellow and Tartrazine remarkably increase at the MWNT film-modified GCE. Based on this, a novel electrochemical method was developed for the simultaneous determination of Sunset Yellow and Tartrazine. The limits of detection are 10.0 ng mL⁻¹ (2.2 × 10⁻⁸ mol L⁻¹) and 0.1 μg mL⁻¹ (1.88 × 10⁻⁷ mol L⁻¹) for Sunset Yellow and Tartrazine. Finally, the proposed method was successfully used to detect Sunset Yellow and Tartrazine in soft drinks.     

Amperometric detection of indapamide on glassy carbon electrode

This work describes the development of a fast, precise and reliable voltammetric method for the quantification of indapamide, an orally active diuretic sulfonamide used for hypertensive treatment. This compound acts inhibiting sodium reabsorption and increasing the elimination of water. This characteristic was responsible for its banishment by the International Olympic Committee since 1999. The study begins by finding an adequate potential range (−0.20 to 0.30 V) to avoid poisoning the working glassy carbon electrode (GCE) in phosphate buffer 0.10 mol L⁻¹ (pH=12.0). Utilizing flow injection analysis, linear responses between 2.0 × 10⁻⁶ mol L⁻¹ to 2.5 × 10⁻⁵ mol L⁻¹ of indapamide (R²=0.995), and detection limit (LOD) 3.0 × 10⁻⁷ mol L⁻¹ were obtained. This method was applied for the quantification of indapamide in tablets and in synthetic urine. The same flow system was used for the analysis of commercial drugs and the response obtained corresponded to 98 % of the concentration indicated on the drug label. These tablets were also analyzed by high performance liquid chromatography (HPLC), obtaining a recovery of 103 % and LOD 4.0 × 10⁻⁷ mol L⁻¹. The velocity of analysis using flow methods compares advantageously to the classical chromatographic methods. For synthetic urine, linear responses were obtained in samples spiked in the region from 5.0 × 10⁻⁶ mol L⁻¹ to 30 × 10⁻⁶ mol L⁻¹ (R²=0.991) and LOD 3.0 × 10⁻⁷ mol L⁻¹.     

Flow injection amperometric detection of ascorbic acid using a Prussian Blue film-modified electrode

The PB film-modified electrode was used as an amperometric detector for flow injection analysis of ascorbic acid. The modified electrode detector showed good sensitivity, stability and reproducibility. The calibration curve for ascorbic acid was linear over the concentration range from 5.0x10(-6) to 1.0x10(-3) mol l(-1) with a slope of 19.9 mA mol(-1) per litre and a correlation coefficient of 0.999. The detection limit of this method was 2.49x10(-6) mol l(-1). The relative standard deviation of six replicate injections of 2.5x10(-4) mol l(-1) ascorbic acid was 2.5%. The results obtained for ascorbic acid determination in pharmaceutical products are in good agreement with those obtained by using the procedure involving the reaction between triiodide and ascorbic acid.     

Sensitive amperometric detection of omeprazole and pantoperazole at electrodeposited nickel oxide nanoparticles modified glassy carbon electrode

Glassy carbon electrode modified with electrodeposited nickel oxide nanoparticles (NiOxNPs) was used as electrocatalyst for oxidation of omeprazole and pentoperazole in alkaline solution. The modified electrode exhibited efficient electrocatalytic activity for the oxidation of omeprazole and pentoperazole with relatively high sensitivity, excellent stability, and long lifetime. Hydrodynamic amperometric method is used for determination of selected analytes. Under optimized condition, the linear concentration range, detection limit, and sensitivity of modified electrode toward omeprazole detection are 4.5–120 μM, 0.4 μM (at signal to noise 3), and 40.1 nA μM⁻¹ cm⁻², respectively. For pantoperazole, hydrodynamic amperometric determination yielded calibration curve with linear range of 2.5–180 μM, detection limit of 0.2 μM, and sensitivity of 39.2 nA μM⁻¹ cm⁻², respectively. The proposed method was successfully applied to pentoperazole and omeprazole determination in drug samples.     

Sensitive L-leucine sensor based on a glassy carbon electrode modified with SrO nanorods

Microchimica Acta - Strontium oxide nanorods (SrO NR) were prepared in alkaline medium by a wet-chemical method. They were characterized by FTIR, UV/Vis, field emission scanning electron...     

Electrochemical detection of selenium using glassy carbon electrode modified with reduced graphene oxide

In this work, a simple experimental procedure was reported for the electroanalytical determination of selenium (IV) using reduced graphene oxide (rGO) to modify glassy carbon electrode (GCE). The rGO was obtained by reduction of graphene oxide obtained via Hummer’s method. The synthesised rGO was characterised using X-ray diffraction, Raman spectroscopy, scanning electron microscope (SEM), energy-dispersive spectroscopy and transmission Electron microscopy (TEM). GCE was modified with rGO and the electrochemical properties of the bare and modified electrode were investigated using cyclic voltammetry and electrochemical impedance spectroscopy. The results obtained showed that the modified electrode exhibited more excellent electrochemical properties than the bare GCE. The optimum conditions for detection of selenium in water using square wave anodic stripping voltammetry were as follows: deposition potential ?500 mV, pH 1, pre-concentration time of 240 s and 0.1 M nitric acid was used as supporting electrolyte. The linear regression equation obtained was I (µA) = 0.8432C + 9.2359 and the detection limit was calculated to be 0.85 μg L^?1. However, Cu(II) and Cd(II) are the two cations that interfered in the analysis of selenium in water.

The sensor was also applied for real sample water analysis and the result obtained was affirmed with inductively coupled plasma optical emission spectroscopic method. It is believed that our proposed sensor hold promise for practical application.     

Sensitive and selective determination of hydrazine using glassy carbon electrode modified with Pd nanoparticles decorated multiwalled carbon nanotubes

A glassy carbon electrode modified with palladium nanoparticles decorated multiwalled carbon nanotubes (GCE/nanoPd-MWCNTs) was fabricated. Incorporation of palladium nanoparticles onto the carbon nantube surface by thermal decomposition of palladium acetate led to the fabrication of a sensor with a significant decrease in hydrazine electrooxidation potential. The sensor exhibited low detection limits, high sensitivity and selectivity, rapid response, and good stability toward hydrazine detection.     

Amperometric detection of carbohydrates and thiols by using a glassy carbon electrode coated with Co oxide/multi-wall carbon nanotubes catalytic system

A glassy carbon electrode coated with cobalt oxide/multi-wall carbon nanotubes (MWCNT) system was used for the detection of carbohydrates and thiols. The modification of the glassy carbon electrode increased the anodic current response of these organic compounds and decreased their overvoltage. The amperometric responses were extremely stable with no loss of sensitivity over many days of storage. Such attractive performance characteristics indicate great promise for using this new catalytic system for monitoring in fast and simple way compounds of great interest for food industry, biotechnology and clinical diagnostics.     

Sensitive determination of hydrazine using poly(phenolphthalein), Au nanoparticles and multiwalled carbon nanotubes modified glassy carbon electrode

This study reports a detailed analysis of an electrode material containing poly(phenolphthalein), carbon nanotubes and gold nanoparticles which shows superior catalytic effect towards to hydrazine oxidation in Britton–Robinson buffer (pH 10.0). Glassy carbon electrode was modified by electropolymerization of phenolphthalein (PP) monomer (poly(PP)/GCE) and the multiwalled carbon nanotubes (MWCNTs) was dropped on the surface. This modified surface was electrodeposited with gold nanoparticles (AuNPs/CNT/poly(PP)/GCE). The fabricated electrode was analysed the determination of hydrazine using cyclic voltammetry, linear sweep voltammetry and amperometry. The peak potential of hydrazine oxidation on bare GCE, poly(PP)/GCE, CNT/GCE, CNT/poly(PP)/GCE, and AuNPs/CNT/poly(PP)/GCE were observed at 596 mV, 342 mV, 320 mV, 313 mV, and 27 mV, respectively. A shift in the overpotential to more negative direction and an enhancement in the peak current indicated that the AuNPs/CNT/poly(PP)/GC electrode presented an efficient electrocatalytic activity toward oxidation of hydrazine. Modified electrodes were characterized with High-resolution transmission electron microscopy (HRTEM), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and electrochemical impedance spectroscopy (EIS). Amperometric current responses in the low hydrazine concentration range of 0.25–13 µM at the AuNPs/CNT/poly(PP)/GCE. The limit of detection (LOD) value was obtained to be 0.083 µM. A modified electrode was applied to naturel samples for hydrazine determination.     

Sensitive detection of sulfanilamide by redox process electroanalysis of oxidation products formed in situ on glassy carbon electrode

This paper reported a simple method for sulfanilamide determination by redox process electroanalysis of oxidation products (SFDox) formed in situ on glassy carbon electrode. The CV experiments showed a reversible process after applied E _acc = + 1.06 V and t _acc = 1 s, in 0.1 mol L^?1 BRBS (pH = 2.0) at 50 mV s^?1. Different voltammetric scan rates (from 10 to 450 mV s^?1) suggested that the redox peaks of SFDox on the glassy carbon electrode (GCE) is an adsorption-controlled process. Square-wave voltammetry (SWV) method optimized conditions showed a linear response to SFD from 3.00 to 250.0 μmol L^?1 (R = 0.998) with a limit of detection of 0.638 μmol L^?1 and limit of quantification of 2.0 μmol L^?1. The developed the SWV method was successfully used in the determination of SFD pharmaceutical formulation and human serum. The SFD quantification results in pharmaceutical obtained by SWV-GCE were comparable to those found by official analytical protocols.     

Electrochemical oxidation behavior of 2,4-dinitrophenol at hydroxylapatite film-modified glassy carbon electrode and its determination in water samples

Hydroxylapatite (HAP)-modified glassy carbon electrode (GCE) was fabricated and used to investigate the electrochemical oxidation behavior of 2,4-dinitrophenol (2,4-DNP) by cyclic voltammetry, differential pulse voltammetry, and chronocoulometry. The oxidation peak current of 2,4-DNP at the modified electrode was obviously increased compared with the bare GCE, indicating that HAP exhibits a remarkable enhancement effect on the electrochemical oxidation of 2,4-DNP. Based on this, a sensitive and simple electrochemical method was proposed for the determination of 2,4-DNP. The effects of HAP concentration, accumulation time, accumulation potential, pH, and scan rate were examined. Under optimal conditions, the oxidation peak current of 2,4-DNP was proportional to its concentration in the range from 2.0 × 10⁻⁶ to 6.0 × 10⁻⁴ M with a correlation coefficient of 0.9987. The detection limit was 7.5 × 10⁻⁷ M (S/N = 3). The proposed method was further applied to determine 2,4-DNP in water samples with recoveries from 96.75% to 106.50%.