Development and evaluation of microwave‐assisted and ultrasound‐assisted methods based on a quick,easy, cheap,effective, rugged,and safe sample preparation approach for the determination of bisphenol analogues in serum and sediments

Microwave‐ and ultrasound‐assisted methods based on a quick, easy, cheap, effective, rugged, and safe sample preparation approach followed by high‐performance liquid chromatography with tandem mass spectrometry were developed for the simultaneous determination of eight bisphenol analogues in serum and sediment. The developed methods provided satisfactory extraction efficiency for the energy provided by microwaves and ultrasound. Compositions of commercial sorbents (primary secondary amine, MgSO₄, octadecyl‐modified silica, and graphitized carbon black) were evaluated. The ultrasound‐assisted method was suited for serum using primary secondary amine, MgSO₄, and octadecyl‐modified silica as sorbents and a mixture of hexane and ethyl acetate as extraction solvent. The microwave‐assisted method worked better for sediment with tetrahydrofuran and methanol as solvents and primary secondary amine, MgSO₄, octadecyl‐modified silica, and graphitized carbon black as sorbents. Other experimental parameters, such as extraction temperature and time, were also optimized. The inter‐ and intraday relative standard deviations ranged from 2.7 to 5.5%. The limits of detection were between 0.1 and 1.0 ng/mL for serum and between 0.1 and 0.5 ng/g dry weight for sediment. The proposed methods were successfully applied to seven sediment and 20 human serum samples. The results showed that the developed methods were practical for the analysis and biomonitoring of bisphenols in sera and sediment.     

Simultaneous determination of the endocrine disrupting compounds nonylphenol, nonylphenol ethoxylates, triclosan and bisphenol A in wastewater and sewage sludge by gas chromatography-mass spectrometry

An integrated analytical method for the simultaneous determination of 4-n-nonylphenol (4-n-NP), nonylphenol monoethoxylate (NP1EO), nonylphenol diethoxylate (NP2EO), bisphenol A (BPA) and triclosan (TCS) in wastewater (dissolved and particulate phase) and sewage sludge was developed based on gas chromatography-mass spectrometry. Chromatographic analysis was achieved after derivatization with bis(trimethylsilyl)trifluoroacetamide (BSTFA). Extraction from water samples was performed by solid-phase extraction (SPE). The optimization of SPE procedure included the type of sorbent and the type of the organic solvent used for the elution. Referred to solid samples, the target compounds were extracted by sonication. In this case the optimization of the extraction procedure included the variation of the amount of the extracted biomass, the duration and the temperature of sonication and the type of the extraction organic solvent. The developed extraction procedures resulted in good repeatability and reproducibility with relative standard deviations (RSDs) less than 13% for all the tested compounds for both types of samples. Satisfactory recoveries were obtained (>60%) for all the compounds in both liquid and solid samples, except for 4-n-NP, which gave recoveries up to 35% in wastewater samples and up to 63% in sludge samples. The limits of detection (LODs) of the target compounds varied from 0.03 (4-n-NP) to 0.41 microg l(-1) (NP2EO) and from 0.04 (4-n-NP) to 0.96 microg kg(-1) (NP2EO) for liquid and solid samples, respectively. The developed methods were successfully applied to the analysis of the target compounds in real samples.     

Analysis of perfluorooctanesulfonate and related fluorochemicals in water and biological tissue samples by liquid chromatography-ion trap mass spectrometry

A method for the determination of perfluorinated compounds (PFCs) in various water and biological tissue samples was developed and validated. The contents of selected PFCs (i.e., perfluorooctanesulfonate (PFOS), perfluorooctanoate (PFOA) and perfluorodecanoate (PFDA)) in water samples were extracted by the C(18) solid-phase extraction (SPE). The biological tissue samples (frozen-dried fish and oysters) were simply extracted by liquid-solid extraction with MTBE and adding tetrabutylammonium hydrogensulfate (TBA) as an ion-pairing reagent. The analytes were then identified and quantitated by liquid chromatography-ion trap negative electrospray mass spectrometry (LC-ESI ion-trap-MS). Limits of quantitation (LOQ) were established between 0.5 and 6 ng/l in 250 ml of water sample, while 5-50 ng/g (dry weight) for biological tissue sample. Intrabatch and interbatch precision with their accuracy at two concentration levels were also investigated. Precision for these three PFCs, as indicated by RSD, proved to be less than 11 and 17%, respectively. The total contents of PFOA, PFOS and PFDA were detected in concentrations of up to 400 ng/l in various water samples, while up to 1,100 ng/g in fish and oyster samples. PFOA and PFDA was the major PFCs detected in water samples and biological tissue samples, respectively.     

Determination of alkylphenolic residues in fresh fruits and vegetables by extractive steam distillation and gas chromatography-mass spectrometry

This study describes a simple and sensitive method for determining the alkylphenolic compounds, 4-tert-octylphenol (4-t-OP), 4-nonylphenol isomers (4-NPs), and their monoethoxylates (4-t-OP1EO and 4-NP1EOs), in fresh fruits and vegetables. The method involves extracting a sample by a modified Nielson-Kryger steam distillation extraction using n-hexane for 1 h. The alkylphenolic compounds were identified and quantitated by gas chromatography-mass spectrometry (GC-MS) in selected ion monitoring (SIM) mode. Various pH values and amounts of NaCl added to the sample solution were evaluated as extraction conditions. The quantitation limit of this method was less than 0.2 ng/g in 10 g (fresh weight) of sample. Recovery of alkylphenolic compounds in spiked samples exceeded 64% while R.S.D. ranged from 1.0 to 9.8%. Alkylphenolic residues were detected in fresh fruits and vegetables at concentrations of 4-NPs and 4-t-OP from n.d. to 16 ng/g and from n.d. to 4.8 ng/g (fresh weight), respectively. NP1EO and OP1EO were always below the quantitation limit.     

Comparison of solvent extraction and solid-phase extraction for the determination of organochlorine pesticide residues in water.

Solid-phase extraction (SPE) of organochlorine pesticide residues from environmental water samples was evaluated using octadecyl (C18)-bonded porous silica. The efficiency of SPE of these pesticide residues from reagent water samples at 1-5 micrograms dm-3 levels was compared with those obtained by solvent extraction with hexane and Freon TF (trichlorotrifluoroethane). Average recoveries exceeding 80% for these organochlorine pesticides were obtained via the SPE method using small cartridges containing 100 mg of 40 microns C18-bonded porous silica. The average recovery by solvent extraction with hexane and Freon TF exceeded 90% in both instances. It was concluded that the recoveries and precision for the SPE of organochlorine pesticides were poorer than those for the solvent extraction method. Organochlorine pesticide residue levels in environmental water samples from two major rivers flowing through predominantly rice-growing areas were monitored by gas chromatography using the solvent extraction method with hexane. Exceptionally high levels of organochlorine pesticide residues such as BHC, DDT, heptachlor, endosulfan and dieldrin were found in these water samples.     

Determination of endocrine-disrupting phenols in water samples by a new manual shaking-enhanced, ultrasound-assisted emulsification microextraction method

Manual shaking-enhanced, ultrasound-assisted emulsification microextraction (MS-USAEME) combined with ultraperformance liquid chromatography (UPLC) with UV detection has been developed for the determination of five endocrine-disrupting phenols (EDPs) in seawater samples and detergent samples: 4-tert-butylphenol (4-t-BP), 4-cumylphenol (4-CP), 4-tert-octylphenol (4-t-OP), 2,4-di-tert-butylphenol (2,4-di-t-BP) and 4-nonylphenol (4-NP). Optimum conditions were found to be: 25 μL 1-bromohexadecane as extraction solvent, 5 mL of aqueous sample and 1 g of NaCl to control the ionic strength; manual shaking for 10 s; ultrasonication for 1 min; centrifugation for 3 min at 5000 rpm (speed). For MS-USAEME, manual shaking for 10 s is essential for effective extraction when the ultrasonic extraction time is as brief as 1 min. The small volume of aqueous sample enhances the effect of manual shaking significantly. For seawater samples, the limit of detection (LOD) was 0.5-2.8 ng mL(-1), the limit of quantification (LOQ) was 1.8-9.3 ng mL(-1) with the relative standard deviation (RSD) in the range 4.2-10.3%. For detergent samples, the LOD was 0.4-2.4 ng mL(-1), LOQ was 1.6-8.2 ng mL(-1) and RSD 4.7-10.0%. The relative recovery was 96-109% for seawater samples and 81-106% for the detergent samples.     

Ionic liquid-based liquid-phase microextraction, a new sample enrichment procedure for liquid chromatography

Room temperature ionic liquids (RTILs) were used as extraction solvent in liquid-phase microextraction (LPME) coupled with liquid chromatography. Using 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6MIM][PF6]) as extraction solvent, some parameters related to LPME of 4-nonylphenol (4-NP) and 4-tert-octylphenol (4-t-OP) were optimized. Although [C6MIM][PF6] can suspend a much larger volume of drop on the needle of the microsyringe than the conventional solvents such as 1-octanol and carbon tetrachloride, the method sensitivity was analyte dependent because of the different partition coefficients and the relatively large viscosity of [C6MIM][PF6]. The proposed procedure has a detection limit and enrichment factor of 0.3 microg l(-1) and 163 for 4-NP, and 0.7 microg l(-1) and 130 for 4-t-OP, respectively. Aqueous samples including tap water, river water, and effluent from sewage treatment plant were analyzed by the proposed method and the recoveries at 10 microg l(-1) spiked level were in the range of 90-113%.     

Gas chromatography--inductively coupled plasma--time-of-flight mass spectrometry for the speciation analysis of organolead compounds in environmental water samples

The application of inductively coupled plasma--time-of-flight mass spectrometry for the speciation analysis of organolead compounds in environmental waters is described. Construction of the transfer line was achieved by means of a relatively simple and rapid coupling procedure. Derivatization of the ionic lead species was achieved by in-situ propylation with sodium tetrapropylborate; simultaneous extraction of the derivatized compounds in hexane was followed by separation and detection by capillary gas chromatography hyphenated to inductively coupled plasma-time-of-flight mass spectrometry. Detection limits for the different organolead species ranged from 10 to 15 fg (as Pb), corresponding to procedural detection limits between 50 and 75 ng L(-1), on the basis of a 50 mL snow sample, extraction with 200 microL hexane, and subsequent injection of 1 microL of the organic extract on to the column. The accuracy of the system was confirmed by additional analysis of the water samples by capillary gas chromatography coupled with microwave-induced plasma-atomic-emission spectrometry and the analysis of a standard reference material CRM 605 (road dust) with a certified content of trimethyllead.     

π-hole bonding: A new retention mechanism for the solid phase extraction of polycyclic aromatic hydrocarbons from the hexane extracts of soil samples

In this work, the perfluorobenzene-bonded silica sorbent was tested to adsorb polycyclic aromatic hydrocarbons in hexane. In the comparison experiments, the perfluorobenzene-bonded sorbent's performance was better than octadecyl silica sorbent and phenyl-bonded silica sorbents, which indicated that the π-hole···π bonds between perfluorobenzene and the polycyclic aromatic hydrocarbons were stronger than π···π interactions and hydrophobic interactions in hexane. Then the perfluorobenzene-bonded silica sorbent was applied to solid-phase extraction of 15 polycyclic aromatic hydrocarbons from the hexane extracts of soil samples directly without the solvent replacement, which simplified the soil pretreatment process. And the results showed that under the optimal conditions, the proposed method for the determination of polycyclic aromatic hydrocarbons in the environment soil presented good recoveries and stabilities for the 10 heavier polycyclic aromatic hydrocarbons with the recoveries ranging from 75.1% to 104.6% and the relative standard deviations being in the range of 1.4%–5.8%. The limits of detection of the method varied from 0.1 to 2 ng/g. This work reveals the great application potential of the π-hole bond as a new retention mechanism in the field of solid-phase extraction.     

Determination of chloramphenicol residue in fish and shrimp tissues by gas chromatography with a microcell electron capture detector

A gas chromatography method with microcell electron capture detection was developed for the determination of chloramphenicol residue in fish and shrimp muscle tissues. The tissue samples were extracted with ethyl acetate, defatted with hexane, and derivatized with Sylon BFT [N,O-bis (trimethylsilyl) trifluoroacetamide-trimethylchlorosilane (99 + 1)]. The limit of detection was 0.04 ng/g and the limit of quantitation 0.1 ng/g. Average recoveries were 70.8-90.8% for fish and 69.9-86.3% for shrimp, respectively. The method was validated for the determination of practical samples.     

Sensitive determination of 4-(4-chlorophenyl)-4-hydroxypiperidine, a metabolite of haloperidol, in a rat biological sample by HPLC with fluorescence detection after pre-column derivatization using 4-fluoro-7-nitro-2,1,3-benzoxadiazole

4-(4-Chlorophenyl)-4-hydroxypiperidine (CPHP), one of the metabolites of haloperidol, is considered to exhibit brain toxicity. CPHP concentrations in plasma and tissue homogenates (each 200 microL) from rats were analyzed by HPLC fluorescence detection after pre-column derivatization with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F). After basic extraction of the samples with benzene, the derivatization with NBD-F was conducted in borate buffer (pH 8.0) at 60 degrees C for 3 min. Mexiletine was carried through the procedure as an internal standard. The regression equation for CPHP showed a good linearity in the range of 0.03-1 microg/mL with a detection limit of 0.008 microg/mL. The coefficient of variation was less than 11.6%. Plasma concentration-time courses of CPHP after intraperitoneal or per oral administration of CPHP, haloperidol or reduced haloperidol were examined, and the pharmacokinetic parameters were estimated. Additionally, CPHP levels in various tissues at 8 h after intraperitoneal administration of these compounds were compared. The method was simple and sensitive, useful for determination of CPHP in rat biological samples using as little as 200 microL of sample volume and could be applied for pharmacokinetic study.     

Ionic liquid mediated sol-gel sorbents for hollow fiber solid-phase microextraction of pesticide residues in water and hair samples

An ionic liquid mediated sol-gel sorbents for hollow fiber solid-phase microextraction (HF-SPME) was developed for extraction of the pesticides: diazinon, fenitrothion, malathion, fenvalerate, phosalone and tridemorph from human hair and water samples. The analytes were subsequently analyzed with high performance liquid chromatography and diode array detection (HPLC-DAD). Preliminary experiments were carried out in order to study experimental conditions for pesticides' extraction from spiked hair and water samples with HF-SPME using hollow fiber-supported ionic liquid mediated sol-gel sorbent. The sol-gel nanocomposites were reinforced with nanoparticles such as carboxylic functionalized multi-walled carbon nanotubes (COOH-MWCNTs), amino functionalized multi-walled carbon nanotubes (NH(2)-MWCNTs), nano SiO(2), nano TiO(2) and nano MgO comparatively to promote extraction efficiency. In this device, the innovative solid sorbents were developed by the sol-gel method via the reaction of tetraethylorthosilicate (TEOS) with 2-amino-2-hydroxymethyl-propane-1,3-diol (TRIS). In the basic condition (pH 10-11), the gel growth process in the presence of ionic liquid and nanoparticles was initiated. Then, the sol was injected into a polypropylene hollow fiber segment for in situ gelation process. Parameters affecting the efficiency of HF-SPME were thoroughly investigated. Linearity was observed over a range of 0.01-25,000 ng/mL with detection limits between 0.004 and 0.095 ng/mL for the pesticides in the aqueous matrices and 0.003-0.080 ng/mL in the hair matrices. The relative recoveries in the real samples ranged from 82.0% to 94.0% for the pesticides store seller's hair and the work researchers' hair. Results are showing the great possibilities of HF-SPME-HPLC-PDA for analysis of pesticides in biological and environmental samples.     

Determination of khellin and visnagin in Ammi visnaga fruits by capillary electrophoresis

A sensitive method for the simultaneous determination of phenolic xenoestrogens such as bisphenol A, 2,4-dichlorophenol, 4-tert,-butylphenol, 4-n2-pentylphenol, 4-n-hexylphenol, 4-n-heptylphenol, 4-octylphenol, 4-nonylphenol was developed using reversed-phase LC and coulometric-array detection. Stepwise gradient elution with phosphoric acid in water-acetonitrile was used. The calibration curves were linear in the range of 5.0 (or 10.0)-1000 ng ml(-1) with correlation coefficients of 0.9978-0.9999, the limits of detection were 0.01-0.02 ng ml(-1). Sample clean-up was performed by solid-phase extraction (SPE) using 3M Empore extraction disks. Three commercial sorbents, C18, SDB-XD (styrene-divinylbenzene polymer) and SDB-RPS (sulfonated styrene-divinylbenzene polymer) were compared. The highest recoveries were obtained with SDB-RPS. They were above 70% with a relative standard deviation of less than 15%. The proposed method was applied to the determination of phenolic xenoestrogens in various water samples.     

Determination of four aromatic amines in water samples using dispersive liquid-liquid microextraction combined with HPLC

A new method for the determination of four aromatic amines in water samples was developed by using dispersive liquid-liquid microextraction (DLLME) technique combined with HPLC-variable wavelength detection (HPLC-VWD). In this extraction method, 0.50 mL methanol (as dispersive solvent) containing 25.0 microL tetrachloroethane (as extraction solvent) was rapidly injected by a syringe into 5.00 mL water sample. Accordingly, a cloudy solution was formed. After centrifugation for 2 min at 4000 rpm, the fine droplets of the tetrachloroethane containing the analytes were sedimented in the bottom of the conical test tube (7+/-0.2 microL). Then, 5.0 microL of the settled phase was determined by HPLC-VWD. Parameters such as the kind and volume of extraction solvent and dispersive solvent, extraction time, and salt concentration were optimized. Under the optimum conditions, the enrichment factors ranged from 41.3 to 94.5. Linearity was observed in the range of 5-5000 ng/mL. The LODs based on S/N of 3 ranged from 0.8 to 1.8 ng/mL. The RSDs (for 400 ng/mL of p-toluidine and o-chloroaniline, 100 ng/mL of p-chloroaniline and p-bromoaniline) varied from 4.1 to 5.3% (n=6). The water samples collected from rivers and lakes were successfully analyzed by the proposed method and the relative recoveries were in the range of 85.4-111.7% and 90.2-101.3%, respectively.     

Barium alginate caged Fe3O4@C18 magnetic nanoparticles for the pre-concentration of polycyclic aromatic hydrocarbons and phthalate esters from environmental water samples

The hydrophobic octadecyl (C₁₈) functionalized Fe₃O₄ magnetic nanoparticles (Fe₃O₄@C₁₈) were caged into hydrophilic barium alginate (Ba²⁺-ALG) polymers to obtain a novel type of solid-phase extraction (SPE) sorbents, and the sorbents were applied to the pre-concentration of polycyclic aromatic hydrocarbons (PAHs) and phthalate esters (PAEs) pollutants from environmental water samples. The hydrophilicity of the Ba²⁺-ALG cage enhances the dispersibility of sorbents in water samples, and the superparamagnetism of the Fe₃O₄ core facilitates magnetic separation. With the magnetic SPE technique based on the Fe₃O₄@C₁₈@Ba²⁺-ALG sorbents, it requires only 30 min to extract trace levels of analytes from 500 mL water samples. After the eluate is condensed to 0.5 mL, concentration factors for both phenanthrene and di-n-propyl-phthalate are over 500, while for other analytes are about 1000. The recoveries of target compounds are independent of salinity and solution pH under testing conditions. Under optimized conditions, the detection limits for phenanthrene, pyrene, benzo[a]anthracene, and benzo[a]pyrene are 5, 5, 3, and 2 ng L⁻¹, and for di-n-propyl-phthalate, di-n-butyl-phthalate, di-cyclohexyl-phthalate, and di-n-octyl-phthalate are 36, 59, 19, and 36 ng L⁻¹, respectively. The spiked recoveries of several real water samples for PAHs and PAEs are in the range of 72-108% with relative standard deviations varying from 1% to 9%, showing good accuracy of the method. The advantages of the new SPE method include high extraction efficiency, short analysis time and convenient extraction procedure. To the best of our knowledge, it is unprecedented that hydrophilic Ba²⁺-ALG polymer caged Fe₃O₄@C₁₈ magnetic nanomaterial is used to extract organic pollutants from large volumes of water samples.     

Solid-phase extraction procedure for determination of phenolic acids and some flavonols in honey

The solid-phase extraction procedure (SPE) for isolation and preconcentration of phenolic acids (gallic, p-HBA, p-coumaric, vanillic, caffeic and syringic acid) and some flavonols (rutin, quercetin and kaempferol) from honey samples prior to their determination by HPLC is reported. Different solid sorbents such as Bond Elut octadecyl C(18), Oasis HLB, Strata-X and Amberlite XAD-2 were tested for this purpose. The best results were obtain when aqueous solution of honey (100 mL) was adjusted to pH 2 and passed through the microcolumn containing 2.5 g of Oasis HB followed by washing the sorbent with 50 mL of acidified water (pH 2). The analytes were then eluted with methanol. The proposed method permits the quantification of the studied compounds with the limit of detections ranged from 25 ng kg(-1) to 0.75 microg kg(-1) for p-HBA and quercetin, respectively. The precision of the overall analytical procedure was estimated by measuring the within-day repeatability and the relative standard deviations of the parallel (n=3) results were in the range of 1.9-10.1%. The method was tested for real honey samples from different botanical origins.     

Development of a validated HPLC method for the determination of four penicillin antibiotics in pharmaceuticals and human biological fluids

A quantitative method for the determination of four penicillin antibiotics, amoxicillin (AMO), oxacillin (OXA), cloxacillin (CLO), and dicloxacillin (DICLO), has been developed. Separation was achieved on an Inertsil ODS-3 (250 x 4 mm, 5 microm) column after selective extraction of penicillin drugs from biological matrices by means of SPE. Gradient elution with a mobile phase consisting of 0.1% TFA (pH 1) and ACN, and PDA detection with monitoring at 240 nm was applied. Salicylic acid (5 ng/microL) was used as the internal standard. RP-8 Adsorbex Merck cartridges provided high absolute recoveries (98-101%). The developed method was fully validated in terms of selectivity, linearity, accuracy, precision, stability, and sensitivity. Repeatability (n = 8) and between-day precision (n = 8) revealed RSD <10%. Recoveries from biological samples ranged from 91 to 103%. The detection limits were estimated as 3.3 ng for AMO, OXA, and CLO, and 6.6 for DICLO in blood plasma. LOD in whole blood and urine was 6.6 ng. Injection volume was 20 microL. The method was applied to commercially available AMO containing pharmaceuticals and spiked biological matrices. The method was also applied to biological samples after AMO oral administration, where the drug was successfully identified and quantified.     

Determination of pyrimethamine in animal tissue and egg by liquid chromatography with fluorescence detection

A sensitive and selective liquid chromatographic (LC) assay was developed to determine the concentration of pyrimethamine in animal tissue and egg by fluorescent derivative. Animal samples were extracted with acetonitrile, centrifuged, and purified by hexane. Fluorescent derivatization was performed by reacting pyrimethamine with chloroacetaldehyde and subjected to LC with fluorescence detection (excitation wavelength 300 nm, emission wavelength 420 nm). The limit of detection was 10 ng/g (10 ppb) and the standard calibration curve was linear in the range of 1-100 ppb (0.01-1 ng/10 microL). Recoveries from samples fortified at levels of 0.1 and 1 ppm (microg/g) were 61.0-77.4 and 65.5-81.2%, respectively. The method was applied to the monitoring of marketed samples. Pyrimethamine was not determined in any of the 70 samples: 20 swine muscle; 20 chicken muscle; 10 chicken liver; and 20 egg.     

4-n-壬基酚的激光闪光光解和紫外光降解

采用266nm激光闪光光解瞬态吸收光谱和254nm紫外光降解,研究了乙腈及乙腈-水混合溶液中4-n-壬基酚（4-n-NP）的各种光解行为,考察了不同物理化学体系对4-n-NP光解行为的影响规律.实验发现,在266nm激光闪光光解下,4-n-NP既发生光电离又发生光激发,获得了4-n-NP光电离生成的阳离子自由基,以及光激发生成的激发三重态的瞬态特征吸收谱.由S2O82-光分解产生的SO4·-可快速氧化4-n-NP,测得反应速率常数为2.85×109M-1s-1,判定4-n-NP阳离子自由基在pH高于2.2条件下会转变成脱质子中性自由基.研究发现,使用254nm紫外光直接降解4-n-NP比较困难,UV结合添加H2O2可提高其降解效率,UV结合添加K2S2O8可极大提高4-n-NP降解效率,3.5min的光照即可使1×10-4M的4-n-NP完全降解.本文就4-n-NP在各种条件下的光解机理进行了探讨,为此类具有生物激素效应的非离子表面活性剂光降解奠定了基础.     

Preparation of functionalized magnetic nanoparticulate sorbents for rapid extraction of biphenolic pollutants from environmental samples

A new solid-phase extraction coupled with magnetic carrier technology was developed for extraction of bisphenol A (BPA) and diethylstilbestrol (DES) from water samples. The SPE sorbents, functionalized magnetic nanoparticles (Fe₃O₄@SiO₂/β-CD, core/shell), were synthesized in a two-stage system. The material was characterized by Fourier transform infrared spectroscopy, transmission electron microscopy, and a vibrating sample magnetometer. SPE extraction parameters, such as volume and pH of sample, adsorption time, and desorption conditions were optimized. Under selected conditions: 250 mL of water sample, 0.1 g of sorbents and elution with methanol (3 mL with 1% acetic acid), the extraction was completed in 25 min. SPE followed by HPLC was employed to determine BPA and DES in environmental samples. The developed method provided spiked recoveries of 80–105%, relative standard deviations of less than 7%, and LOD of BPA (20.0 ng/L) and DES (23.0 ng/L), respectively. The proposed method offered easy preparation of sorbents, rapid analysis, high enrichment yields, and reliable quantitative assay.