去乙酰毛花苷的流动注射化学发光分析研究

在碱性介质中,去乙酰毛花苷对鲁米诺-KIO4发光体系有明显的抑制作用,且抑制效果与其质量浓度呈良好的线性关系,据此建立了去乙酰毛花苷的流动注射化学发光分析方法。该方法的线性范围为1.0×10-8~1.0×10-5g/mL,检出限为3.1×10-9g/mL,对1.0×10-7g/mL的去乙酰毛花苷进行连续11次平行测定,相对标准偏差为2.3%。可用于相应注射剂分析,并与药典方法进行对照。     

Flow-injection electrogenerated chemiluminescence determination of isoniazid using luminol.

Based on a new electrogenerated chemiluminescence (ECL) analytical idea, this paper explains a sensitive and selective flow-injection ECL method using luminol for the determination of isoniazid, based on the sensitizing effect of isoniazid for the weak ECL emission of electrochemically oxidized luminol. Under the optimum experimental conditions, the relative ECL intensity was linear with isoniazid concentration in the range of 4.0 x 10(-8) mol/L to 8.0 x 10(-6) mol/L and with a detecting limit of 2.8 x 10(-8) mol/L.     

Flow-injection chemiluminescence determination of tryptophan using galangin-potassium permanganate–polyphosphoric acid system

A high sensitive flow-injection chemiluminescence （FI-CL） method for the determination of tryptophan has been developed. The method is based on the chemiluminescence reaction of galangin-potassium permanganate-tryptophan in polyphosphoric acid （PPA） media. Under the optimized conditions, tryptophan was determined in the range 0.05-10 μg/mL with the detection limit （3tr） of 5.0 × 10^-3 μg/mL. The relative standard deviation （RSD） was 1.0% for 11 replicate determinations of 1.0 μg/mL tryptophan. Three synthetic samples were determined selectively with recoveries in the range from 99.6% to 102.0% in the presence of other amino acids.     

流动注射化学发光法测定白藜芦醇苷

基于白藜芦醇苷对Luminol KIO4 H2O2体系化学发光的抑制作用,建立了一种快速测定白藜芦醇苷的流动注射化学发光分析法。测定白藜芦醇苷的线性范围为2.0×10-8～8.8×10-6mol L;检出限为6.7×10-9mol L;相对标准偏差为1.9%(c白藜芦醇苷=4.4×10-7mol L,n=11);采样频率为144次 h。该方法可用于葡萄酒和中药虎杖中白藜芦醇苷的测定。     

Flow-injection chemiluminescence determination of chloroquine using peroxynitrous acid as oxidant

A new flow-injection chemiluminescence (CL) method for determination of chloroquine is proposed based on a stronger chemiluminescence of chloroquine in hydrogen peroxide-nitrite-sulfuric acid medium. The proposed method allows the measurement of chloroquine over the range of 3.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹. The detection limit is 8.6×10⁻⁸ mol l⁻¹, and the relative standard deviation for 1.0×10⁻⁶ mol l⁻¹ chloroquine (n=11) is 1.6%. The CL mechanism is also discussed.     

Flow-injection chemiluminescence determination of chlorinated isocyanuric acids

A rapid and sensitive flow-injection chemiluminescence method is described for the determination of dichloro- and trichloroisocyanuric acids based on the chemiluminescence produced during their reaction with luminol in alkaline medium. The effects of analytical and flow-injection variables on these chemiluminescence systems and determination of both oxidants are discussed. The optimized method yielded 3sigma detection limits of 8x10(-8) and 5x10(-8) mol L(-1) for the sodium dichloroisocyanurate and trichloroisocyanuric acid, respectively. The optimum conditions were found to be as follows: NaOH, 1x10(-1) mol L(-1); luminol, 5x10(-3) mol L(-1); KI, 2x10(-3) mol L(-1) and flow rate, 3.5 mL min(-1).     

Flow-injection post chemiluminescence determination of atropine sulfate

A new post chemiluminescence (PCL) reaction was observed when atropine sulfate was injected into the reaction mixture after the finish of CL reaction of Ce(IV) and sodium sulfite. The possible mechanism for the PCL reaction was discussed via the investigation of the CL kinetic characteristics, the CL spectra, the UV absorption spectra and the fluorescence spectra of some related substances. The flow injection PCL method for the determination of atropine sulfate was established. The relative standard deviation (R.S.D.) was 2.8% (n = 11, c = 5.0 × 10⁻⁶ g mL⁻¹). The PCL intensity responded linearly to the concentration of atropine sulfate in the range 1.0 × 10⁻⁶ to 5.0 × 10⁻⁵ g mL⁻¹ with a linear correlation of 0.9947. The detection limit was 4 × 10⁻⁷ g mL⁻¹ atropine sulfate. The method had been applied to the determination of atropine sulfate in the tablets and the results were consistent with the method of Chinese pharmacopoeia.     

Flow-injection chemiluminescence determination of formaldehyde in water

A modification of the Trautz-Schorigin reaction into a flow-injection analysis configuration is described. Different approaches were used at the optimization of chemiluminescence determination of formaldehyde in water based on the reaction of formaldehyde, gallic acid and hydrogen peroxide in an alkaline solution. Detection system with a 218 μl chemiluminescence cell was optimized by both a one-variable-at-a-time method, and a modified simplex method. A calibration graph is linear in the concentration range 4 × 10⁻⁸ to 1 × 10⁻⁵ M HCHO. The detection limit of formaldehyde for a signal-to-noise ratio of 3 is 4 × 10⁻⁸ M. The relative standard deviations for 15 repeated measurements of 1 × 10⁻⁶ and 5 × 10⁻⁶ mol l⁻¹ HCHO are 4.32 and 3.33%, respectively. The analysis time is 1.5 min. The method was applied to the determination of formaldehyde in urban rainwater. A comparison of results found by proposed method with those obtained by fluorimetric reference method provided a good agreement.     

流动注射化学发光法测定水中的苯胺

基于在多聚磷酸介质中,KMnO4氧化苯胺能产生强化学发光,建立了流动注射化学发光测定苯胺的新方法.在优化条件下,化学发光强度ⅠCL与苯胺的浓度在2.0×10～1.0×10-6 mol/L范围内呈良好的线性关系,回归方程为ⅠCL=63.11 2.37×108c(r=0.9997,n=9),检出限为5.0×10-10 mol/L,对1.0×10-7 mol/L苯胺进行11次测定,其相对标准偏差为0.8%(n=11).已用于环境水体中苯胺的测定,回收率在95.1%～105.1%之间.     

Flow-injection chemiluminescence determination of dihydralazine sulfate in serum using luminol and diperiodatocuprate (III) system

A novel flow-injection chemiluminescence (CL) method for the determination of dihydralazine sulfate (DHZS) is described. The method is based on the reaction of luminol and diperiodatocuprate (K₂[Cu(H₂IO₆)(OH)₂], DPC) in alkaline medium to emit CL, which is greatly enhanced by DHZS. The possible CL mechanism was first proposed based on the kinetic characteristic, CL spectrum and UV spectra. The optimum condition for the CL reaction was in detail studied using flow-injection system. The experiments indicated that under optimum condition, the CL intensity was linearly related to the concentration of DHZS in the range of 7.0 × 10^?9 to 8.6 × 10^?7 g mL^?1 with a detection limit (3σ) of 2.1 × 10^?9 g mL^?1. The proposed method had good reproducibility with the relative standard deviation 3.1% (n = 7) for 5.2 × 10^?8 g mL^?1 of DHZS. This method has the advantages of simple operation, fast response and high sensitivity. The special advantage of the system is that very low concentration of luminol can react with DPC catalyzed by DHZS to get excellent experiment results. And CL cannot be observed nearly when luminol with same concentration reacts with other oxidants, so luminol–DPC system has higher selectivity than other luminol CL systems. The method has been successfully applied to determine DHZS in serum.     

Flow-injection chemiluminescence determination of formaldehyde with a bromate-rhodamine 6G system.

In this paper, a novel flow-injection chemiluminescence (CL) system for the determination of formaldehyde is described. It is based on a strong enhance effect of formaldehyde on the weak CL emission of the reaction between potassium bromate and rhodamine 6G in a sulfuric acid medium. A possible mechanism for this CL reaction is proposed. A CL calibration graph was linear in the range of 0.8 - 200 microg l(-1) and the detection limit was 0.3 microg l(-1) (3sigma). The relative standard deviation was less than 3% for 10 microg l(-1) formaldehyde (n = 11). The method has been applied to determine formaldehyde in the air samples.     

流动注射化学发光法测定头孢氨苄和头孢拉定

基于KMnO4在酸性介质中氧化头孢氨苄和头孢拉定产生微弱的化学发光,同时借助甲醛对发光的增强作用,采用流动注射技术,建立了以上两种头孢类抗生素药物的测定新方法。方法检出限分别为0.096和0.10μg mL;相对标准偏差分别为1.6%和1.8%(n=11),线性范围分别为0.8～25和0.8～32μg mL,进样频率为60次 h。本方法已用于药物制剂的测定。     

Flow-injection chemiluminescence determination of penicillin antibiotics in drugs and human urine using luminol-Ag(III) complex system

A chemiluminescent (CL) system based on the reaction of an Ag(III) complex with luminol in alkaline medium is presented. Gamma order of magnitude penicillin species antibiotics could dramatically enhance CL intensities. Coupled with flow injection analysis (FIA), a novel sensitive chemiluminescent analytical technique for some penicillin antibiotics in drugs and urine samples is introduced. Under optimum conditions, benzylpenicillin sodium, amoxicillin, ampicillin and cloxacillin sodium were determinated. Detection limits of this method are 70 ng/mL for benzylpenicillin sodium, 67 ng/mL for amoxicillin, 169 ng/mL for ampicillin and 64 ng/mL for cloxacillin sodium. For the spiked urine samples, the recoveries of the four drugs were in the range of 106–112% for benzylpenicillin sodium, 104–110% for amoxicillin, 104–106% for ampicillin, and 103–105% for cloxacillin sodium. Based on the fluorescence spectra, free radical trapping experiment, and chemiluminescent spectra, a possible reaction mechanism is suggested.     

Flow-injection chemiluminescence determination of fluoroquinolones by enhancement of weak chemiluminescence from peroxynitrous acid

A flow-injection chemiluminescence (CL) method is described for the determination of fluoroquinolones including ciprofloxacin, norfloxacin and ofloxacin. The method is based on the enhancement by these compounds of the weak CL from peroxynitrous acid. The linear ranges are 1.0×10⁻⁷ to 1.0×10⁻⁵ mol l⁻¹ for ciprofloxacin and norfloxacin, and 3.0×10⁻⁷ to 3.0×10⁻⁵ mol l⁻¹ for ofloxacin, respectively. The detection limits (S/N=3) are 4.5×10⁻⁸ mol l⁻¹ ciprofloxacin, 5.9×10⁻⁸ mol l⁻¹ norfloxacin and 1.1×10⁻⁷ mol l⁻¹ ofloxacin, respectively. The proposed method was applied to the determination of fluoroquinolones in pharmaceutical preparations.     

Flow-injection chemiluminescence determination of quinine using on-line electrogenerated cobalt(III) as oxidant

A novel chemiluminescence (CL) flow system for the determination of quinine is described. It is based on the direct chemiluminescence reaction of quinine and cobalt(III) in sulfuric acid medium. The unstable Co(III) was on-line electrogenerated by constant-current electrolysis. The chemiluminescence intensity was linear with a quinine concentration in the range of 0.1-100 mug ml(-1). The determination limit was 3.3x10(-8) g ml(-1). The whole process could be completed in 1 min. The proposed method is suitable for automatic and continuous analysis, and has been applied successfully to the analysis of quinine in pharmaceutical preparation.     

Flow-injection determination of trace amounts of dopamine by chemiluminescence detection

A flow-injection analysis (FIA) for the determination of dopamine has been developed. The method is based on the inhibition effect of dopamine on the iron(II)-induced chemiluminescence (CL) of 10,10'-dimethyl-9,9'-biacridinium dinitrate (lucigenin). The presence of a non-ionic surfactant, polyoxyethylene (23) lauryl ether (Brij 35), caused an increase in the inhibition effect. The present method allows the determination of dopamine over the range 1x10(-8)-2x10(-7) mol dm(-3). The relative standard deviation was 0.7% for eight determinations of 6x10(-8) mol dm(-3) dopamine. The detection limit (S/N=3) was 2x10(-9) mol dm(-3) with the sampling rate of 40 samples h(-1). The effect of other catecholamines and compounds of similar structure on the lucigenin CL reaction was studied: quinone, hydroquinone, norepinephrine, pyrocatechol and l-dopa suppressed the CL intensity.     

Flow-injection chemiluminescence determination of epinephrine in pharmaceutical preparations using raw apple juice as enzyme source

Raw apple juice exhibits the activity of polyphenol oxidase which can be employed for the determination of mono-, di- and polyhydric phenols. The chemiluminescence detection in the two-channel manifold was used to develop the new procedure for determination of epinephrine. Epinephrine can be determined by this method in pharmaceutical preparations in concentration ranges 1.0–10.0 and 10.0–25.0 mg l⁻¹, with a detection limit of 0.2 mg l⁻¹. Good selectivity against typical antioxidants and other coexisting substances was achieved. Relatively slow loss of the enzyme activity was observed during 1 week. The proposed method is very simple. Fresh juice solution from one apple can be prepared in 10 min and used for at least 8 h with excellent precision. Consumption of luminol solution was 0.15 ml min⁻¹. The throughput was 20 samples per hour.     

A general chemiluminescence method for the determination of surfactants based on its quenching effect on the luminol-NaIO4-cyclodextrin reaction

Here we report that all types of surfactant could be simply and sensitively determined, by directly quenching the chemiluminescence (CL) between luminol and NaIO4 in a basic solution containing one polyhydroxyl compound such as cyclodextrin (CD), glucose or glycerol. This specific quenching effect was attributed to the change of the microenvironment of the CL reaction, caused by the addition of various surfactants. Based on this fact, the potential use of this CL reaction was exemplified by the cationic surfactant CTMAB, anionic surfactant SDS and non-ionic surfactant Triton X-100. It was found that the measurable range of CTMAB, SDS and Triton X-100 were 4.0 x 10(-6)-4.0 x 10(-4) M by using a basic CD-luminol-NaIO4 CL reaction. With our simple setup, CTMAB, SDS and Triton X-100 were detectable at a concentration as low as 2 microM. Overall, this new CL reaction is quite promising for the post-column determination of surfactant mixtures.     

流动注射-化学发光方法测定盐酸萘甲唑林和盐酸氧甲唑林

H2SO4酸性条件下,甲醛对KMnO4-盐酸萘甲唑林(盐酸氧甲唑林)化学发光体系有较强的增敏作用,且强度与药物浓度呈良好的线性关系.据此,建立了采用KMnO4-甲醛体系测定制剂中盐酸萘甲唑林(盐酸氧甲唑林)的流动注射-化学发光分析法.在优化的实验条件下,盐酸萘甲唑林在1.0×10-8～7.0×10-6g/mL范围内呈良好的线性关系,检出限为8.69×10-9g/mL;盐酸氧甲唑林在5.0×10-8～1.0×10-5范围内呈线性关系,检出限为3.47×10-8g/mL.对浓度为1.0×10-6g/mL的盐酸萘甲唑林和盐酸氧甲唑林分别进行的11次平行测定,RSD分别为4.0%和4.1%.     

Flow-injection determination of sugars with immobilized enzyme reactions and chemiluminescence detection

Glucose is determined by reaction with gluocose oxidase to produce hydrogen peroxide which is quantified via a chemiluminescence reaction with luminol. Sucrose, maltose, lactose and fructose are determined by enzymatic conversion to glucose (using invertase, amyloglucosidase, lactase. and glucose isomerase, respectively) and subsequent determination of the glucose, All enzymes are immobilized on controlled-pore glass and contained in flow-through reactors. For glucose, sucrose, and maltose the linear log-log working range 0.2 μM-1 mM, with a detection limit of 0.1 μM; for lactose and fructose the linear working range is 3 μM-1 mM with a detection limit of 1 μM. Assay time is 2 min.