1-正辛基-3-甲基咪唑六氟磷酸盐离子液体对聚砜分离膜的结构控制及其作用机理

以1-正辛基-3-甲基咪唑六氟磷酸盐[C8mim][PF6]作为膜结构控制剂,采用相转化法制备具有不同孔结构的聚砜分离膜.随着[C8mim][PF6]含量的增大,聚砜膜的孔结构从典型的不对称指状孔结构、高度拉长的大孔结构、典型的大空穴,变化至海绵状孔结构,离子液体[C8mim][PF6]在聚砜膜制备中表现出孔结构控制、增塑作用.通过能谱分析表明,[C8mim][PF6]在所制备的聚砜膜中存在部分的保留,通过水与聚砜膜表面接触角的测定,[C8mim][PF6]在聚砜膜中的残留提高了膜的亲水性能.基于相分离过程的基本理论,探讨了疏水性[C8mim][PF6]在铸膜液相分离过程中孔结构形成的作用机理.研究表明,[C8mim][PF6]在铸膜液中含量越高,对于相分离的延时效应越大,体系更易发生延时分相.     

室温离子液体对氨基苯磺酸的萃取性能

系统研究了[C₄mim][PF₆], [C₆mim][PF₆], [C₆mim][BF₄]和[C₈mim][BF₄]室温离子液体对间氨基苯磺酸、对氨基苯磺酸稀水溶液的萃取平衡. 实验结果表明: 萃取温度和相体积比的变化对分配比影响不大; 水相pH值对萃取平衡有较大的影响, 氨基苯磺酸在离子液体/水体系中的分配比在pH＝4.2时达到最大值; 水相中CaCl₂或Na₂SO₄的存在能较大幅度地提高氨基苯磺酸的分配比; 离子液体的阴离子的性质对分配比有显著的影响, 阴离子为[BF₄]^－的离子液体对氨基苯磺酸的萃取能力大于阴离子为[PF₆]^－的离子液体; 咪唑环上烷基链的长度也对萃取效果有一定的影响. 在所研究的离子液体中, [C₆mim][BF₄]和[C₈mim][BF₄]对氨基苯磺酸有较好的萃取性能, 且萃取相中的氨基苯磺酸可回收利用, 离子液体也可循环使用.     

The glass transition and the distribution of voids in room-temperature ionic liquids: a molecular dynamics study

The glass transition in prototypical room temperature ionic liquids has been investigated by molecular dynamics simulations based on an Amber-like empirical force field. Samples of [C(4)mim][PF(6)], [C(4)mim][Tf(2)N], and [C(3)mim][Tf(2)N] have been quenched from the liquid phase at T = 500 to a glassy state at T ～ 0 K in discontinuous steps of 20 K every 1.2 ns. The glass temperature estimated by simulation (T(g) = 209 K for [C(4)mim][PF(6)], T(g) = 204 K for [C(4)mim][Tf(2)N], and T(g) = 196 K for [C(3)mim][Tf(2)N]) agrees semi-quantitatively with the experimental values (T(g) = 193÷196 K for [C(4)mim][PF(6)], T(g) = 186÷189 K for [C(4)mim][Tf(2)N], and T(g) = 183 K for [C(3)mim][Tf(2)N]). A model electron density is introduced to identify voids in the system. The temperature dependence of the size distribution of voids provided by simulation reproduce well the experimental results of positron annihilation lifetime spectroscopy reported in G. Dlubek, Y. Yu, R. Krause-Rehberg, W. Beichel, S. Bulut, N. Pogodina, I. Krossing, and Ch. Friedrich, J. Chem. Phys. 133, 124502 (2010), with only one free parameter needed to fit the experimental data.     

Nanostructural organization and anion effects in the optical Kerr effect spectra of binary ionic liquid mixtures

This article reports a study of the effect of anions on the optical Kerr effect (OKE) spectra of binary ionic liquid mixtures with one mixture comprising the 3-methyl-1-pentylimidazolium ([C 5mim] (+)) cation and the anions PF 6 (-) and CF 3CO 2 (-) (TFA (-)), and another mixture comprising the [C 5mim] (+) cation and the anions Br (-) and bis(trifluomethanesulfonyl)imide (NTf 2 (-)). The spectra were obtained by the use of optical heterodyne-detected Raman-induced Kerr Effect Spectroscopy at 295 K. The OKE spectra of the mixtures are compared with the calculated mole-fraction weighted sum of the normalized OKE spectra of the neat liquids. The OKE spectra are nearly additive for [C 5mim]Br/[C 5mim][NTf 2] mixtures, but nonadditive for [C 5mim][PF 6]/[C 5mim][TFA] mixtures. In the case of the equimolar [C 5mim][PF 6]/[C 5mim][TFA] mixture, the nonadditivity is such that the experimental OKE spectrum is narrower than the calculated OKE spectrum. The additivity or nonadditivity of OKE spectra for IL mixtures can be explained by assuming ionic liquids are nanostructurally organized into nonpolar regions and ionic networks. The ionic networks in mixtures will be characterized by "random co-networks" for anions that are nearly the same in size (PF 6 (-) and TFA (-)) and by "block co-networks" for anions that differ greatly in size (Br (-) and NTf 2 (-)).     

Raman and ab initio studies of simple and binary 1-alkyl-3-methylimidazolium ionic liquids

Raman spectra of the ionic liquids, 1-butyl-3-methylimidazolium hexafluorophosphate ([C4mim][PF6]), 1-hexyl-3-methylimidazolium chloride ([C6mim]Cl), and 1-hexyl-3-methylimidazolium hexafluorophosphate ([C6mim][PF6]), and binary mixtures thereof, have been assigned using ab initio MP2 calculations. The previously reported anti and gauche forms of the [C4mim]+ cation have been observed, and this study reveals this to be a general feature of the long-chain 1-alkyl derivatives. Analysis of mixtures of [C6mim]Cl and [C6mim][PF6] has provided information on the nature of the hydrogen bonding between the imidazolium headgroup and the anions, and the invariance of the essentially 50:50 mixture of the predominant conformers informs on the nature of glass formation in these systems.     

Ionic liquids as a convenient new medium for the catalytic asymmetric dihydroxylation of olefins using a recoverable and reusable osmium/ligand

The use of room-temperature ionic liquids (RTILs) in the Sharpless catalytic asymmetric dihydroxylation (AD) as a cosolvent or replacement of the tert-butanol was studied in detail by screening 11 different RTILs. The AD reaction is faster in 1-n-butyl-3-methylimidazolium hexafluorophosphate [C(4)mim][PF(6)] as a cosolvent than in the conventional system of tert-butanol/H(2)O. For the range of six substrates tested, comparable or even higher yields and enantiomeric excess (ee) were found using [C(4)mim][PF(6)] or 1-n-octyl-3-methylimidazolium hexafluorophosphate [C(8)mim][PF(6)] compared to the conventional solvent system. Due to high affinity of the catalytic osmium/quiral ligand system to the ionic liquid, the use of ionic liquid/water (biphasic) or ionic liquid/water/tert-butanol (monophasic) solvent systems provides a recoverable, reusable, robust, efficient, and simple system for the AD reaction. Using 1-hexene and [C(4)mim][PF(6)] as RTIL it was possible to reuse the catalytic system for 9 cycles with only a 5% of yield reduction from the first cycle, allowing an overall yield of 87%, TON = 1566, and with similar ee. Additionally, for each cycle, after extraction of the reaction mixture with diethyl ether, the osmium content in the organic phase (containing the AD product) and in the aqueous phase was in the range of the detection limit (相似文献   

Nanostructural organization and anion effects on the temperature dependence of the optical Kerr effect spectra of ionic liquids

The intermolecular spectra of three imidazolium ionic liquids were studied as a function of temperature by the use of optical heterodyne-detected Raman-induced Kerr effect spectroscopy. The ionic liquids comprise the 1,3-pentylmethylimidazolium cation ([C(5)mim]+), and the anions, bromide (Br-), hexafluorophosphate (PF(6)-), and bis(trifluoromethanesulfonyl)imide (NTf(2)-). Whereas the optical Kerr effect (OKE) spectrum of [C(5)mim][NTf(2)] is temperature-dependent, the OKE spectra of [C(5)mim]Br and [C(5)mim][PF6] are temperature-independent. These results are surprising in light of the fact that the bulk densities of these room temperature ionic liquids (RTILs) are temperature-dependent. The temperature independence of the OKE spectra and the temperature dependence of the bulk density in [C(5)mim]Br and [C(5)mim][PF(6)] suggest that there are inhomogeneities in the densities of these liquids. The existence of density inhomogeneities is consistent with recent molecular dynamics simulations that show RTILs to be nanostructurally organized with nonpolar regions arising from clustering of the alkyl chains and ionic networks arising from charge ordering of the anions and imidazolium rings of the cations. Differences in the temperature dependences of the OKE spectra are rationalized on the basis of the degree of charge ordering in the polar regions of the RTILs.     

Water-clustering in hygroscopic ionic liquids-an implicit solvent analysis

Most ionic liquids are known to be hygroscopic to varying degrees, and that can be detrimental or useful depending upon the application in question. Water can accumulate slowly over hours or days to saturation levels corresponding to the humidity level. When designing or deploying a new ionic liquid it is important to be able to estimate its maximum moisture absorbing ability at the temperature and pressure of its operation. With this goal in mind we have carried out computational studies on three ionic liquid systems based on [BF(4)](-), [PF(6)](-), and [Tf(2)N](-) anions and 1-alkyl-3-methyl-imidazolium ([C(n)mim](+)) cations within an implicit solvent formalism. For highly hygroscopic systems like [C(n)mim][BF(4)] we find that non-iterative calculations with single water molecules can lead to significant underestimation of the maximum moisture content, while iterative calculations can result in miscibility behavior qualitatively different from experimental observations. On the other hand, the inclusion of small hydrogen-bonded water-clusters up to an appropriately chosen size is shown to yield better quantitative agreements with experimentally observed water uptake. Additionally, such calculations appear consistent with a number of thermodynamically interesting phase behaviors, including limited-solubility to full-miscibility transitions as a function of temperature and as a function of the alkyl chain length of the imidazolium cation. For hydrophobic systems like [C(n)mim][PF(6)] and [C(n)mim][Tf(2)N] the computed solubility (for each n) is found to have a smooth convergence behavior as a function of the largest cluster-size considered with the results for the larger clusters being close to that obtained by iterative calculations with single water molecules.     

Colloidal stability of bare and polymer-grafted silica nanoparticles in ionic liquids

The colloidal stability of bare and poly(methyl methacrylate) (PMMA)-grafted silica nanoparticles was studied in 1-alkyl-3-methylimidazolium ([C(n)mim])-based ionic liquids (ILs) with different anionic structures. The theoretical estimation of the colloidal interaction between monodispersed bare silica particles by using the Derjaguin-Landau-Verwey-Overbeek theory indicates that bare silica particles cannot be stabilized and they rapidly form aggregates in all the ILs used in this study. The instability of bare silica particles was experimentally confirmed by dynamic light scattering measurement and in situ transmission electron microscopy observations by utilizing the negligible vapor pressure of ILs. This evidence suggests that electrostatic stabilization is inefficient in ILs because of the high ionic atmosphere and the resulting surface-charge screening. The PMMA-grafted silica particles exhibited long-term colloidal stability in [C(4)mim][PF(6)] and [C(n)mim][NTf(2)], which are compatible with the grafted PMMA. On the other hand, the PMMA-grafted particles could not be stabilized in [C 4mim][BF 4] due to the poor solubility of the grafted PMMA in the IL. Effective steric stabilization is important for obtaining stable colloidal particles in ILs.     

An electrochemical study of the oxidation of hydrogen at platinum electrodes in several room temperature ionic liquids

The electrochemical oxidation of dissolved hydrogen gas has been studied in a range of room-temperature ionic liquids (RTILs), namely [C(2)mim][NTf(2)], [C(4)mim][NTf(2)], [N(6,2,2,2)][NTf(2)], [P(14,6,6,6)][NTf(2)], [C(4)mpyrr][NTf(2)], [C(4)mim][BF(4)], [C(4)mim][PF(6)], [C(4)mim][OTf], and [C(6)mim]Cl on a platinum microdisk electrode of diameter 10 microm. In all cases, except [C(6)mim]Cl, a broad quasi-electrochemically reversible oxidation peak between 0.3 to 1.3 V vs Ag was seen prior to electrode activation ([C(6)mim]Cl showed an almost irreversible wave). When the electrode was pre-anodized ("activated") at 2.0 V vs Ag for 1 min, the peak separations became smaller, and the peak shape became more electrochemically reversible. It is thought that the electrogenerated protons chemically combine with the anions (A-) of the RTIL. The appearance and position of the reverse (reduction) peak on the voltammograms is thought to depend on three factors: (1) the stability of the protonated anion, HA, (2) the position of equilibrium of the protonation reaction HA<==> H+ + A- , and (3) any follow-up chemistry, e.g., dissociation or reaction of the protonated anion, HA. This is discussed for the five different anions studied. The reduction of HNTf(2) was also studied in two [NTf(2)]- -based RTILs and was compared to the oxidation waves from hydrogen. The results have implications for the defining of pKa in RTIL media, for the development of suitable reference electrodes for use in RTILs, and in the possible amperometric sensing of H2 gas.     

超声辅助离子液体液相微萃取-高效液相色谱法分析水样中加替沙星或氟罗沙星

建立了一种采用离子液体1-己基-3-甲基咪唑六氟磷酸([C6mim][PF6])为萃取剂,超声辅助离子液体液相微萃取-高效液相色谱法分析水样中加替沙星和氟罗沙星的方法。 实验考察了溶液酸度、离子液体用量等因素对萃取的影响。在pH值分别为3.3、2.1的加替沙星和氟罗沙星水样中,加入0.4 mL [C6mim][PF6],超声,离心,离子液体相直接用于HPLC进行分析。 该方法的线性范围为0.5~50 mg/L,测定加替沙星和氟罗沙星的相对标准偏差(n=5)为2.80%和5.93%,二者的检出限分别为0.46、0.97 μg/L,该方法萃取水样中加替沙星的加标回收率为80.5%~89.5%,氟罗沙星的加标回收率可达93.3%~99.0%。     

High-pressure CO2-induced reduction of the melting temperature of ionic liquids

An in situ ATR-IR spectroscopic study has shown that high-pressure CO2 reduces melting temperature of ionic liquids such as [C16mim][PF6].     

咪唑基离子液体的物理化学性质估算及预测(英文)

根据经验和半经验方程及空隙模型理论,可以估算及预测离子液体在298.15K的物理化学性质.本文讨论了离子液体的分子体积,密度,标准熵,晶格能,表面张力,等张比容,摩尔蒸发焓,空隙体积,空隙率和热膨胀系数.通过实验测得的三种离子液体1-乙基-3-甲基咪唑硫酸乙酯([C2mim][EtSO4)]),1-丁基-3-甲基咪唑硫酸辛酯([C4mim][OcSO4])和1-乙基-3-甲基咪唑双三氟甲磺酰亚胺盐([C2mim][NTf2])的密度和表面张力估算了它们的其它物理化学性质.由这三种离子液体的分子体积及等张比容预测了同系列中其它离子液体[Cnmim][EtSO4],[Cnmim][OcSO4]和[Cnmim][NTf2](n=1-6)的分子体积及等张比容,由此计算出它们的密度及表面张力.进而预测了它们的物理化学性质.将预测的离子液体[C4mim][NTf2]和[C2mim][OcSO4]的密度值与文献报导的实验值进行比较,其偏差在实验误差范围内.最后,将由Kabo经验方程计算的七个离子液体[C2mim][EtSO4]、[C4mim][OcSO4]、[C2mim][NTf2]、[C4mim][NTf2]、丁基三甲基铵双三氟甲磺酰亚胺盐([N4111][NTf2])、甲基三辛基铵双三氟甲磺酰亚胺盐([N8881][NTf2])和1-辛基-3-甲基吡啶四氟硼酸盐([m3opy][BF4])的摩尔蒸发焓与由Verevkin简单规则预测的摩尔蒸发焓进行比较,发现两者符合很好.因此,在缺乏密度和表面张力实验数据的情况下,可以用Verevkin简单规则来预测离子液体的摩尔蒸发焓.     

Nicotine: on the potential role of ionic liquids for its processing and purification

Marked solubility differences of nicotine in the ionic liquids [C(2)mim][NTf(2)], [C(2)mim][EtOSO(3)], and [C(n)mim]Cl, 6 相似文献   

Application of ionic liquids as plasticizers for poly(methyl methacrylate)

The room temperature ionic liquid, 1-butyl-3-methylimidazolium hexafluorophosphate, [C4mim][PF6] was found to be an efficient plasticizer for poly(methyl methacrylate), prepared by in situ radical polymerization in the ionic liquid medium; the polymers have physical characteristics comparable with those containing traditional plasticizers and retain greater thermal stability.     

Deviations from ideality in mixtures of two ionic liquids containing a common ion

Excess molar volumes of six binary mixtures composed of two ionic liquids of the 1-methyl-3-alkyl-imidazolium bis(trifluoromethylsulfonyl)amide family -- ([C(m)()mim] + [C(n)()mim])[NTf(2)] with n and m ranging from 2 to 10 -- were measured for several compositions at 298 and 333 K. Similarly, three other binary systems containing [C(4)mim](+) (1-methyl-3-butylimidazolium) as a common cation have been studied: [C(4)mim]([NTf(2)] + [PF(6)]), [C(4)mim]([NTf(2)] + [BF(4)]) and [C(4)mim]([BF(4)] + [PF(6)]). Thus, the mixing process of two distinct ions of equal sign embedded in a constant field network of a given counterion was analyzed. All systems exhibit small, positive V(E) values of the order of a few tenths of cm(3) mol(-1), which are essentially temperature and pressure independent. The results show additive trends, for instance, the V(E) values become larger as the difference between the alkyl chain lengths of the two cations increases. The Flory theory of mixtures provides a useful, semiquantitative correlation between the excess volumes and excess enthalpies in these systems, allowing for comparison with analogous results obtained within the linear primary alcohols.     

Estimation of physicochemical properties of ionic liquids 1-alkyl-3-methylimidazolium chloroaluminate

The density and surface tension of ionic liquids [C(2)mim][AlCl(4)] (1-ethlyl-3-methyl imidazolium chloroaluminate) and [C(6)mim][AlCl(4)] (1-hexyl-3-methylimidazolium chloroaluminate) were measured in the temperature range from 283.15 to 338.15 +/- 0.05 K. In terms of these experimental results, the estimation of physicochemical properties of 1-alkyl-3-methylimidazolium chloroaluminate ([C(n)mim][AlCl(4)], n = 1-6) was carried out. With the use of the parachor, the values of surface tension of the ILs were predicted. In terms of Glasser's theory, the standard molar entropy, lattice energy, and surface properties of the ILs were estimated. With the use of Kabo's method and Rebelo's method, the molar enthalpy of vaporization of the ILs, Delta(l)(g)H(m)(0), was predicted. According to the interstice model, the values of the thermal expansion coefficient of the ILs were also estimated. Since the magnitude order of the thermal expansion coefficient estimated by the model is in good agreement with that measured experimentally, this result means that the interstice model is reasonable.     

Study on the phase behaviors,viscosities, and thermodynamic properties of CO2/[C(4)mim][PF(6)]/methanol system at elevated pressures

An apparatus to determine the vapor-liquid equilibria of CO(2)/ionic liquid (IL)/organic solvent multisystems and the viscosity of the liquid phase at elevated pressures has been constructed. The solubility of CO(2) in 3-butyl-1-methyl-imidazolium hexafluorophosphate ([C(4)mim][PF(6)]) and the viscosity of CO(2)-saturated [C(4)mim][PF(6)] have been studied at 313.15, 323.15, and 333.15 K and at pressures up to 12.5 MPa. The phase behavior of CO(2)/[C(4)mim][PF(6)]/methanol ternary mixture and the viscosity of the liquid phases at equilibrium condition have also been determined at 313.15 K and at 7.15 and 10.00 MPa. The partition coefficients of the components in the ternary system are calculated. Peng-Robinson equation of state and some thermodynamic functions are combined to calculate the fugacity coefficients of the components in the system. It demonstrates that the viscosity of the IL-rich phase decreases significantly with increasing pressure of CO(2), and the effect of temperature on the viscosity of CO(2)/IL mixture is not noticeable at high pressure, although the viscosity of the CO(2)-free IL decreases dramatically with increasing temperature. Compressed CO(2) may become an attractive reagent for reducing the viscosity of ILs in many applications. The mole fraction of methanol in the CO(2)-rich phase is much lower than that in the IL-rich phase; this indicates that the interaction between the IL and methanol is stronger than that between CO(2) and methanol. The fugacity coefficient of CO(2) in IL-rich phase is larger than unity, while that of methanol is much small than unity, which further suggests that methanol-IL interaction is much stronger than CO(2)-IL interaction. However, the CO(2)-IL interaction is stronger than the CO(2)-methanol interaction.     

Study on the Conductivities of Pure and Aqueous Bromide-Based Ionic Liquids at Different Temperatures

Electrical conductivities were measured for the pure ionic liquids [C₆mim][Br] (1-hexyl-3-methylimidazolium bromide) and [C₈mim][Br] (1-octyl-3-methylimidazolium bromide) at 0.1 MPa from 293.15 to 333.15 K. Conductivity measurements were also made for the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems and their ternary water + [C₆mim][Br] + [C₈mim][Br] system at 0.1 MPa and 293.15, 298.15, and 303.15 K. The conductivity data of the pure ionic liquids were correlated by the VFT (Vogel-Tamman-Fulcher) equation, and the fitting parameters and mean absolute deviations were determined. New explanations are presented for the molality-dependent behavior of the conductivity of the binary water + [C₆mim][Br] and water + [C₈mim][Br] systems. The generalized Young’s rule and the semi-ideal solution theory for conductivity were used to predict the conductivities of the ternary water + [C₆mim][Br] + [C₈mim][Br] system from the conductivities of its corresponding binary water + [C₆mim][Br] and water + [C₈mim][Br] subsystems. The predictions are in good agreement with the measured values.     

Facile access to redox-active C2-bridged complexes with half-sandwich manganese end groups

The dinuclear mixed-valent complex [(MeC5H4)(dmpe)MnC(2)Mn(dmpe)(C5H4Me)](+)[(eta2-MeC5H4)3Mn](-)[1](+)[2]- (dmpe=1,2-bis(dimethylphosphanyl)ethane) was prepared by the reaction of [Mn(MeC5H4)2] with dmpe and Me(3)SnC[triple chemical bond]CSnMe3. The reactions of [1](+)[2]- with K[PF6] and Na[BPh4] yielded the corresponding anion metathesis products [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6] ([1][PF6]) and [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][BPh4] ([1][BPh4]). These mixed-valent species can be reduced to the neutral form by reaction with Na/Hg. The obtained complex [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)] (1) displays a triplet/singlet spin equilibrium in solution and in the solid state, which was additionally studied by DFT calculations. The diamagnetic dicationic species [(MeC5H4)(dmpe)MnC2Mn(dmpe)(C5H4Me)][PF6]2 ([1][PF6]2) was obtained by oxidizing the mixed-valent complex [1][PF6] with one equivalent of [Fe(C5H5)2][PF6]. Both redox processes are fully reversible. The dinuclear compounds were characterized by NMR, IR, UV-visible, and Raman spectroscopy, cyclic voltammetry, and magnetic susceptibility measurements. X-ray diffraction studies were performed on [1][2], [1][PF6], [1][BPh4], and [1][PF6]2.