Synthesis and properties of γ-Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> solid solutions

The textural and structural properties of mixed oxides Ga₂O₃–Al₂O₃, obtained via impregnating γ-Al₂O₃ with a solution of Ga(NO₃)₃ and subsequent heat treatment, are studied. According to the results from X-ray powder diffraction, gallium ions are incorporated into the structure of aluminum oxide to form a solid solution of spinel-type γ-Ga₂O₃–Al₂O₃ up to a Ga₂O₃ content of 50 wt % of the total weight of the sample, accompanied by a reduction in the specific surface area, volume, and average pore diameter. It is concluded that when the Ga₂O₃ content exceeds 50 wt %, the β-Ga₂O₃ phase is observed along with γ-Ga₂O₃–Al₂O₃ solid solution. ⁷¹Ga and ²⁷Al NMR spectroscopy shows that gallium replaces aluminum atoms from the tetrahedral position to the octahedral coordination in the structure of γ-Ga₂O₃–Al₂O₃.     

Specific features of the crystal and local structures of compounds formed in the Dy<Subscript>2</Subscript>O<Subscript>3</Subscript>–HfO<Subscript>2</Subscript> system

The crystal and local structures of compounds formed in the Dy₂O₃–HfO₂ system (at molar ratios from 1: 3 to 3: 1) in the course of isothermal annealing of X-ray amorphous mixed hydroxides at temperatures up to 1600°C have been studied. At the molar ratio Dy₂O₃: HfO₂ from 1: 3 to 1: 1, crystallization leads to formation of single-phase defect fluorite solid solutions nDy₂O₃ ? mHfO₂ with clearly pronounced nonequivalence of parameters of local environment of Dy³⁺ and Hf⁴⁺ cations. It has been found that Dy₂H₂O₇ (Dy₂O₃: HfO₂ = 1: 2) samples have a tendency to pyrochlore-type ordering in both the cationic and anionic sublattices.     

Targeted synthesis ultrafine α- and γ-Bi<Subscript>2</Subscript>O<Subscript>3</Subscript> having different morphologies

Reactions of nitric acid solutions of bismuth with alkalis have been studied. The effect caused by coprecipitation conditions in the presence of additional agents (EG, PEG 400, or PEG 8000) and without on the phase composition and morphology of α- and γ-Bi₂O₃ has been determined.     

Structure and magnetic properties of the nanocomposites γ-Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>-SiO<Subscript>2</Subscript>

The structural features and magnetic properties of composite materials Fe₂O₃-SiO₂ consisting of γ-Fe₂O₃ nanoparticles in an amorphous porous matrix of SiO₂ were considered. The studied samples were synthesized by the sol-gel method. The structure of γ-Fe₂O₃-SiO₂ depending on the heating temperature was studied by electron microscopy, X-ray diffraction analysis, ESR and IR spectroscopy. Magnetic measurements were performed on a SQUID magnetometer in the range 2–350 K.     

Hydrocracking of vacuum gas oil in the presence of catalysts NiMo/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–amorphous aluminosilicates and NiW/Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–amorphous aluminosilicates

Supported nickel–molybdenum and nickel–tungsten hydrocracking catalysts prepared using a support that consists of 70% Al₂O₃ and 30% amorphous aluminosilicate were characterized by nitrogen and mercury porosimetry, IR spectroscopy of adsorbed CO, and high-resolution electron microscopy. The catalytic tests in hydrocracking of vacuum gas oil containing 3.39% sulfur showed that the nature of the hydrogenating component (NiMo or NiW) only slightly influences the vacuum gas oil conversion and the diesel fraction yield, but noticeable influences the properties of the diesel fraction obtained. The catalyst NiMo/Al₂O₃–amorphous aluminosilicates, compared to NiW/Al₂O₃–amorphous aluminosilicates, ensures lower sulfur content in the diesel fraction obtained, whereas the catalyst NiW/Al₂O₃–amorphous aluminosilicates allows obtaining a diesel fraction with lower content of polyaromatic compounds.     

Modifying additives affect the properties of Y<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> system

The effects caused by modifying additives, namely nonionic surfactants (Tween 80 and Neonol AF 9-6) and oxides (B₂O₃ and HfO₂), on the rheology, film formation, and phase formation in the yttrium aluminum silicate system prepared by sol–gel technology were studied. The effect of 1 wt % HfO₂ additions on the activation energy of crystallization was studied.     

Pd/Ga<Subscript>2</Subscript>O<Subscript>3</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts for the selective liquid-phase hydrogenation of acetylene to ethylene

The structure of Ga₂O₃–Al₂O₃ supports and Pd/Ga₂O₃–Al₂O₃ catalysts and the performance of these catalysts in liquid-phase acetylene hydrogenation have been investigated. The deposition of Ga(NO₃)₃ onto Al₂O₃ by impregnation followed by calcination of the impregnated support at 600°C yields γ-Ga₂O₃–Al₂O₃ solid solutions containing up to 50 wt % Ga₂O₃. X-ray diffraction characterization of model palladium catalysts and their temperature-programmed reduction with hydrogen have demonstrated that, while palladium in Pd/Ga₂O₃ is in the form of a Pd₂Ga alloy, in the Pd/γ-Ga₂O₃–Al₂O₃ catalyst there is no direct interaction between PdО and Ga₂O₃ particles and palladium is in the monometallic state. The introduction of 10–20 wt % gallium oxide into Al₂O₃ lowers the activity of the supported palladium catalyst relative to that of the initial Pd/Al₂O₃ but increases the ethylene yield by enhancing the ethylene formation selectivity.     

Atmospheric control of gel-oxide transformation in sol–gel derived Al<Subscript>2</Subscript>O<Subscript>3</Subscript>-Y<Subscript>2</Subscript>O<Subscript>3</Subscript> fibers

Via sol–gel processing metal–organic fibers were produced and dried up to 140 °C. For these gel fibers the influence of a treatment in different atmospheres was investigated for the temperature range of 200–850 °C. The atmospheres were nitrogen, water vapor, evaporated nitric and hydrochloric acid and evaporated hydrogen peroxide. In the presence of moisture and especially with acidic moisture fibers were transformed almost completely to their oxide composition (82 mol% Al₂O₃·18 mol% Y₂O₃). In these inorganic amorphous structures considerable differences were observed on several structural levels. On the atomic scale, the coordination of Al ions was investigated by ²⁷Al MAS NMR and skeletal density by He-pycnometry. Porosity in the nm scale was characterized by N₂-sorption. As a macroscopic effect of different treatment atmospheres, the longitudinal shrinkage was observed. For fibers treated at 500 °C the relative shrinkage varied by 100% (comparing water vapor and nitrogen atmosphere). No simple correlation between the release of organic constituents, the formation of porosity and the shrinkage could be found. These aspects were controlled by the rigidity of the inorganic network against atomic reconstitution. The kind of atmosphere was found to be an effective parameter to control various aspects of the xerogel structure.     

The character of interactions of CO,H<Subscript>2</Subscript>, and CH<Subscript>3</Subscript>OH with the surface of γ-Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and Cu-Zn oxide catalyst

The thermal desorption of CO, H₂, and CH₃OH from the surface of Katalco-58 industrial catalyst for the synthesis of methanol and γ-Al₂O₃ was studied. Weak interaction of the gases with the surface of samples was observed over the temperature range 75–400°C. The desorption of the gases obeyed the second-order Wigner-Polyani equation. The desorption energies of the gases were calculated. The mechanism of dimethyl ether synthesis was studied.     

Formation of solid solutions of multiferroics in the Bi<Subscript>2</Subscript>O<Subscript>3</Subscript>–Nd<Subscript>2</Subscript>O<Subscript>3</Subscript>–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> system

The sequence of phases appearance during the formation of Bi_1–xNd_xFeO₃ solid solutions in powder oxides mixtures of bismuth, neodymium, and iron has been determined. It has been shown that the closeness of the reaction mixture composition to that of the individual compound (BiFeO₃ or NdFeO₃) is essential for the realization of the series of phase transformations yielding solid solutions of multiferroics Bi_1–xNd_xFeO₃ as the final product, due to the prevalence of various interphase contacts in the starting reaction zone.     

Identification of iron oxidation states in the products of interaction of Na<Subscript>2</Subscript>O<Subscript>2</Subscript> and Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> by Mössbauer absorption spectroscopy

The first stage of the solid-phase reaction of Na₂O₂ and Fe₂O₃ yields a tetravalent iron derivative. The product is unstable and disproportionates to form compounds with different oxidation states of iron. Analysis of their Mössbauer spectra was performed with the DISCVER program based on the Afanas’ev-Chuev method. At the early stage of analysis, the program identifies the maximal possible number of well-defined lines in the spectrum with a specified statistical quality and, thus, discerns a large number of known and unknown iron derivatives (phases) in samples of complex composition. Previously unknown highest oxidation states of iron from +5 to +8 were identified.     

Effect of ZrO<Subscript>2</Subscript> on Catalyst Structure and Catalytic Sulfur-Resistant Methanation Performance of MoO<Subscript>3</Subscript>/ZrO<Subscript>2</Subscript>–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> Catalysts

A series of MoO₃/ZrO₂–Al₂O₃ catalysts was prepared and investigated in the sulfur-resistant methanation aimed at production of synthetic natural gas. Different methods including impregnation, deposition precipitation, and co-precipitation were used for preparing ZrO₂–Al₂O₃ composite supports. These composite supports and their corresponding Mo-based catalysts were investigated in the sulfur-resistant methanation, and characterized by N₂ adsorption–desorption, XRD and H₂-TPR. The results indicated that adding ZrO₂ promoted MoO3dispersion and decreased the interaction between Mo species and support in the MoO₃/ZrO₂–Al₂O₃ catalysts. The co-precipitation method was favorable for obtaining smaller ZrO₂ particle size and improving textural properties of support, such as better MoO₃ dispersion and increased concentration of Mo⁶⁺ species in octahedral coordination to oxygen. It was found that the MoO₃/ZrO₂–Al₂O₃ catalyst with ZrO₂Al₂O₃ composite support prepared by co-precipitation method exhibited the best catalytic activity. The ZrO₂ content in the ZrO₂Al₂O₃ composite support was further optimized. The MoO₃/ZrO₂–Al₂O₃ with 15 wt % ZrO₂ loading exhibited the highest sulfur-resistant CO methanation activity, and excess ZrO₂ reduced the specific surface area and enhanced the interaction between Mo species and support. The N₂ adsorption-desorption results indicated that the presence of ZrO₂ in excessive amounts decreased the specific surface area since some amounts of ZrO₂ form aggregates on the surface of the support. The XRD and H₂-TPR results showed that with the increasing ZrO₂ content, ZrO₂ particle size increased. These led to the formation of coordinated tetrahedrally Mo⁶⁺(T) species and crystalline MoO₃, and this development was unfavorable for improving the sulfur-resistant methanation performance of MoO₃/ZrO₂–Al₂O₃ catalyst.     

The characterization and property of polystyrene compounding of α-Fe<Subscript>2</Subscript>O<Subscript>3 </Subscript>in the nano-scale

-Fe₂O₃/polystyrene composite nanoparticles were synthesized in an oil/water microemulsion. Their structure was characterized by transmission electron microscopy, X-ray diffraction and Fourier transform-infrared spectrometry. An Ubbelonde viscometer, a Gouy balance and a model 283 potentiostat/galvanostat measured the molecular weight of the composite nanoparticles and their magnetic and electrical characteristics respectively.     

Effects of Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> on the crystallization and structure of CaO–Fe<Subscript>2</Subscript>O<Subscript>3</Subscript>–SiO<Subscript>2</Subscript> glass ceramics

Radiation-induced degradation of the weakly and strongly 4-vinylpyridine basic ion exchange resins by gamma radiolysis was investigated in the presence of air and liquid water. This study is focused on evaluating the radiolytic gases (H₂, CO, CO₂ and CH₄) and liquid products (water-solute TOC and NH₄ ⁺). The weakly basic resin yielded lower amounts of H₂ and CO and higher amounts of CO₂ than those of the strongly basic resin. Moreover, the strong basic resin tended to yield greater amounts of NH₄ ⁺. Resins were characterized by the FTIR spectroscopy technique and the results showed that the resins structures are relatively stable.     

Adsorption of chlorobenzene vapor on V<Subscript>2</Subscript>O<Subscript>5</Subscript>/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalyst under dynamic conditions

Adsorption dynamics of chlorobenzene vapors on a 5% V₂O₅/Al₂O₃ catalyst has been investigated using the frontal chromatography technique. The uptakes of chlorobenzene have been measured as a function of vapor concentration and adsorption equilibrium has been found to follow formally the Langmuir isotherm. The breakthrough time proved to be a linear function of the column length as expected. Breakthrough profiles have been reported for different experimental conditions and quantitatively fitted by a reduced lumped diffusion model. This model provides an analytical solution that facilitates engineering calculations. Model parameters show complex behavior as functions of stream characteristics and depend on column length. When empirical expressions relating model mass transfer coefficients with influencing variables are found the model demonstrates good accuracy in predicting column performance.     

P/RS intergrowth type phases in the Ln<Subscript>2</Subscript>O<Subscript>3</Subscript>–MO–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> systems

Regularities of formation of complex aluminates with structure of P/RS intergrowth type phases in the Ln₂O₃–MO–Al₂O₃ systems (Ln = rare-earth element, M = Mg, Ca, Sr, Ba) have been considered. Systematization of the data on formation of complex compounds coexisting with one-layer phases in the Ln₂O₃–MO–Al₂O₃ systems and analysis of geometry criteria of LnMAlO₄ stability is a promising approach to prediction of novel compounds with structure of Ruddlesden–Popper phase.     

Physicochemical properties of (CH<Subscript>3</Subscript>)<Subscript>2</Subscript>NH<Subscript>2</Subscript>Cl–Al<Subscript>2</Subscript>O<Subscript>3</Subscript> composites

Composite solid electrolytes were synthesized from the organic salt dimethylammonium chloride (1–x)C₂H₈NCl–xAl₂O₃. Their physicochemical properties were studied. In the starting C₂H₈NCl salt, there is a phase transition at 39°C accompanied by an increase in conductivity by two orders of magnitude. The conductivity of the high-temperature phase is 9.3 × 10^–6 S/cm at 160°C. A differential scanning calorimetry study showed that the salt in the composites spreads over the oxide surface and at x > 0.6 the salt melting enthalpy decreases to zero. The conductivity of the resulting composites was studied by impedance spectroscopy. It was shown that heterogeneous doping leads to a sharp increase in ion conductivity to 7.0 × 10^–3 S/cm at 160°C and a decrease in the activation energy to 0.55 eV.     

Sol–gel synthesis and characterization of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>–TiO<Subscript>2</Subscript> nanocrystalline powder

Al₂O₃–TiO₂ nanocrystalline powders were synthesized by sol–gel process. Aluminum sec-butoxide and titanium isopropoxide chemicals were used as precursors and ethyl acetoacetate was used as chelating agent. Thermal and crystallization behaviors of the precursor powders were investigated by thermal gravimetric-differential thermal analysis, Fourier-transform infrared spectrum and X-ray diffraction. The average crystalline size of heat treated Al₂O₃–TiO₂ powders at 1,100 °C is ~100 nm.