Preparation and characterization of a novel stimuli-responsive nanocomposite hydrogel with improved mechanical properties

A novel stimuli-responsive organic/inorganic nanocomposite hydrogel (NC hydrogel) with excellent mechanical properties was synthesized by in situ polymerization of 2-(2-methoxyethoxy) ethyl methacrylate (MEO(2)MA), oligo (ethylene glycol) methacrylate (OEGMA) and acrylic acid (AAc), as the polymeric matrix (PMOA), and fibrillar attpulgite (AT), as the reinforcer and cross-linker. The effect of the AT content on the mechanical properties for the swollen and dried NC hydrogels was determined by tensile testing and dynamic mechanical analysis (DMA), respectively. The tensile testing results showed that the incorporation of AT nanoparticles significantly enhanced the mechanical properties of NC hydrogels. As the content of AT increased, the tensile strength, tensile modulus and effective cross-linked chain density increased. The DMA results showed that the storage modulus of AT/PMOA NC hydrogels was increased and the glass transition temperatures shifted to higher temperature compared to the pure PMOA hydrogel, which further indicated that the enhancement of mechanical property depended upon the presence and content of AT. In addition, the faster swelling rates of the NC hydrogels were observed in comparison with the corresponding physically cross-linked PMOA hydrogel, except for 1% AT/PMOA sample. However, the deswelling kinetics of NC hydrogels was obviously retarded.     

Evaluation of the degree of cross-linking of cellulose-based superabsorbent hydrogels: a comparison between different techniques

Three different techniques have been applied to the evaluation of the degree of cross-linking of superabsorbent cellulose-based hydrogels obtained from water solutions of carboxymethylcellulose sodium salt (CMCNa) and hydroxyethylcellulose (HEC), chemically cross-linked with divinyl sulfone. These polyelectrolyte hydrogels are biodegradable and have the same sorption capacity as acrylate-based superabsorbents on the market. A ¹³C solid state NMR analysis was carried out on dry samples of hydrogel to obtain the degree of cross-linking, an important parameter that affects the swelling and mechanical properties of a hydrogel. Dynamic mechanical analysis was performed during the hydrogel cross-linking using a parallel plate rheometer under oscillatory deformations in order to monitor the evolution of the hydrogel viscoelastic properties during the synthesis. The value of |G*| and the slope of the stress-deformation ratio plots from uniaxial compression tests were used to evaluate the elastically effective degree of cross-linking according to classical rubber elasticity theory. Moreover, a dynamic mechanical analysis was carried out on cross-linked hydrogels at different degrees of swelling in order to investigate the influence of the swelling on the mechanical properties and the application of rubber elasticity theory to swollen hydrogels.     

Dual cross-linked networks hydrogels with unique swelling behavior and high mechanical strength: based on silica nanoparticle and hydrophobic association

A series of physically cross-linked hydrogels composed poly(acrylic acid) and octylphenol polyoxyethylene acrylate with high mechanical strength are reported here with dual cross-linked networks that formed by silica nanoparticles (SNs) and hydrophobic association micro-domains (HAMDs). Acrylic acid (AA) and octylphenol polyoxyethylene acrylate with 10 ethoxyl units (OP-10-AC) as basic monomers in situ graft from the SNs surface to build poly(acrylic acid) hydrophilic backbone chains with randomly distributed OP-10-AC hydrophobic side chains. The entanglements among grafted backbone polymer chains and hydrophobic branch architecture lead to the SNs and HAMDs play the role of physical cross-links for the hydrogels network structure. The rheological behavior and polymer concentration for gelation process are measured to examine the critical gelation conditions. The correlation of the polymer dual cross-linked networks with hydrogels swelling behavior, gel-to-sol phase transition, and mechanical strength are addressed, and the results imply that the unique dual cross-linking networks contribute the hydrogels distinctive swelling behavior and excellent tensile strength. The effects of SNs content, molecular weight of polymer backbone, and temperature on hydrogels properties are studied, and the results indicate that the physical hydrogel network integrity is depended on the SNs and HAMDs concentration.     

Physical, chemical, and chemical-physical double network of zwitterionic hydrogels

Zwitterionic hydrogels are very promising for biomedical applications. They are usually copolymerized with other polymers to improve their mechanical properties often at the expense of their biological properties. In this study, physically cross-linked poly(sulfobetaine methacrylate) (polySBMA) hydrogels were prepared, and their physical properties including phase behavior were investigated. Linear polySBMAs, with an average molecular weight ranging from 20.9 kDa to 316 kDa, were prepared via free radical polymerization at different KCl concentrations. The opaque-transparent phase transition of polySBMA-water mixtures were measured using a UV-vis spectrometer. Analysis from dynamic rheometry showed the formation of physically cross-linked hydrogels with mechanical ductility due to reversible charge interactions. Chemically cross-linked hydrogels were also prepared, and their swelling and mechanical properties were evaluated. It was found that the introduction of cross-linkers could lead to a decrease in the amount of physical cross-links in chemical hydrogels. In order to improve the mechanical properties of SBMA hydrogels, linear polySBMA was introduced to the network of chemically cross-linked polySBMA gels, creating a chemical-physical double network (DN) with both chemical and physical cross-links. The chemical-physical DN provides a desirable method to improve the mechanical properties of zwitterionic hydrogels without introducing other hydrophobic moieties.     

Effect of initiator on the structure of hydrogels of cross-linked polyacrylic acid

The gelation kinetics in the static and dynamic modes was studied for hydrogels of cross-linked polyacrylic acid synthesized using two initiating systems: the widely used system ammonium persulfate-tetramethylethylenediamine and the system ammonium persulfate-sodium sulfite-Mohr’s salt, which has not been used for this synthesis previously. The monomer concentration was varied, with the monomer/cross-linking agent ratio kept constant. The pH dependences of the gel swelling were determined, and the effective degrees of cross-linking were calculated in relation to the monomer concentration. The factors that give rise to defects affecting the regularity of the gel network structure and the degree of gel swelling were analyzed.     

Swelling behavior of ionically cross-linked polyampholytic hydrogels in varied salt solutions

Ionically cross-linked polyampholytic hydrogels were synthesized by redox copolymerization of acrylamide and an ionic complex of (N,N-diethylamino)ethyl methacrylate and acrylic acid (designated as PADA hydrogel). The swelling behavior of the hydrogels in water indicated that a minimal equilibrium swelling ratio is found when the molar ratio of anionic/cationic monomers was 1.55. In NaCl solution, the hydrogels exhibited the typical swelling behavior of conventional polyampholytic gels. Their equilibrium swelling ratios increased with an increase in the NaCl concentration. In solutions of multivalent ions (CaCl₂ and trisodium citrate solutions), the equilibrium swelling ratios of the hydrogels increased first and were then followed by a decrease with an increase in salt concentration. Interestingly, an unexpected abrupt swelling phenomenon was observed when the fully swollen hydrogels in salt solution were transmitted to pure water. The unique swelling behavior of PADA hydrogels depends not only on the molar ratio of the anionic/cationic monomers but also on the valency of the ions.     

Photodegradable, Photoadaptable Hydrogels via Radical-Mediated Disulfide Fragmentation Reaction

Various techniques have been adopted to impart a biological responsiveness to synthetic hydrogels for the delivery of therapeutic agents as well as the study and manipulation of biological processes and tissue development. Such techniques and materials include polyelectrolyte gels that swell and deswell with changes in pH, thermosensitive gels that contract at physiological temperatures, and peptide cross-linked hydrogels that degrade upon peptidolysis by cell-secreted enzymes. Herein we report a unique approach to photochemically deform and degrade disulfide cross-linked hydrogels, mitigating the challenges of light attenuation and low quantum yield, permitting the degradation of hydrogels up to 2 mm thick within 120 s at low light intensities (10 mW/cm(2) at 365 nm). Hydrogels were formed by the oxidation of thiol-functionalized 4-armed poly(ethylene glycol) macromolecules. These disulfide cross-linked hydrogels were then swollen in a lithium acylphosphinate photoinitiator solution. Upon exposure to light, photogenerated radicals initiate multiple fragmentation and disulfide exchange reactions, permitting and promoting photodeformation, photowelding, and photodegradation. This novel, but simple, approach to generate photoadaptable hydrogels portends the study of cellular response to mechanically and topographically dynamic substrates as well as novel encapsulations by the welding of solid substrates. The principles and techniques described herein hold implications for more than hydrogel materials but also for photoadaptable polymers more generally.     

Multi-bond network hydrogels with robust mechanical and self-healable properties

Multi-bond network(MBN) which contains a single network with hierarchical cross-links is a suggested way to fabricate robust hydrogels. In order to reveal the roles of different cross-links with hierarchical bond energy in the MBN, here we fabricate poly(acrylic acid) physical hydrogels with dual bond network composed of ionic cross-links between carboxylFe3+ interactions and hydrogen bonds, and compare these dually cross-linked hydrogels with singly and ternarily cross-linked hydrogels. Simple models are employed to predict the tensile property, and the results confirm that the multi-bond network with hierarchical distribution in the bond energy of cross-links endows hydrogel with effective energy-dissipating mechanism. Moreover, the dually cross-linked MBN gels exhibit excellent mechanical properties(tensile strength up to 500 k Pa, elongation at break ~ 2400%) and complete self-healing after being kept at 50 °C for 48 h. The factors on promoting self-healing are deeply explored and the dynamic multi-bonds are regarded to trigger the self-healing along with the mutual diffusion of long polymer chains and ferric ions.     

Bioinspired dual dynamic network hydrogels promote cartilage regeneration through regulating BMSC chondrogenic differentiation

How to improve the therapeutic efficacy of cell delivery during mechanical injection has been a great challenge for tissue engineering. Here, we present a facile strategy based on dynamic chemistry to prepare injectable hydrogels for efficient stem cell delivery using hyaluronic acid (HA) and poly(γ-glutamic acid) (γ-PGA). The combination of the guest–host (GH) complexation and dynamic hydrazone bonds enable the HA/γ-PGA hydrogels with physical and chemical dual dynamic network and endow hydrogels a stable structure, rapid self-healing ability, and injectability. The mechanical properties, self-healing ability, and adaptability can be programmed by changing the ratio of GH network to hydrazine bond cross-linked network. Benefitting from the dynamic cross-linking networks, mild preparation process, and cytocompatibility of HA/γ-PGA hydrogels, bone marrow mesenchymal stem cells (BMSCs) show high cell viability in this system following mechanical injection. Moreover, HA/γ-PGA hydrogels can promote BMSC proliferation and upregulate the expression of cartilage-critical genes. Notably, in a rabbit auricular cartilage defect model, BMSC-laden HA/γ-PGA hydrogels can effectively promote cartilage regeneration. Together, we propose a general strategy to develop injectable self-healing HA/γ-PGA hydrogels for effective stem cell delivery in cartilage tissue engineering.     

Hybrid Hydrogels Assembled from Phenylalanine Derivatives and Agarose with Enhanced Mechanical Strength

A roadblock for supramolecular hydrogels is their poor mechanical properties. Herein, to enhance the mechanical strength of supramolecular hydrogels, agarose(AG) was incorporated into the low molecular weight hydrogelator(G1). The results of scanning electron microscopy(SEM), circular dichroism(CD) and Fourier transform infrared spectroscopy(FTIR) prove that G1 gelators can self-assemble into cross-linked network together with AG. The mechanical properties of the gels are characterized by a rotary rheometer and the mechanical properties of the hybrid hydrogels(Hgel) can be significantly improved and may be further tuned by changing the ratio of the two components. For example, the elastic modulus of Hgel Ⅱ[m(G1):m(AG)=7:3] is about 2 times higher than that of G1 hydrogel. The results demonstrate that the mechanical property of hybrid supramolecular hydrogels can be adjusted through the formation of a cross-linked network.     

Production of Polyacrylic Acid Homo- and Copolymer Films by Electrochemically Induced Free-Radical Polymerization: Preparation and Swelling Behavior

Films of polyacrylic acid hydrogels were produced on a conducting substrate by means of electrochemically initiated polymerization (EIP). An electro-chemical quartz crystal microbalance was used to monitor film growth in situ. Homopolymer and copolymer films of polyacrylic acid and poly-N-isopropylacrylamide were characterized by FTIR spectroscopy. The degree of swelling of these films could be tuned via the pH.     

The hydrolysis of N-vinylpyrrolidone in the presence of polyacrylic acid and potassium persulphate

The vinyl monomer N-vinyl pyrrolidone (NVP) hydrolyses in aqueous solution in the presence of both polyacrylic acid and potassium persulphate. The rates of these hydrolyses have been measured; in the former case, the rate is the same as in the presence of acetic acid. In addition polyacrylic acid is cross-linked by potassium persulphate although the cross-linked polymer is still capable of interacting with complexing molecules such as polyvinylpyrrolidone. The mechanism of the NVP hydrolysis is shown to agree with that proposed by other workers although the dimeric product 1,1′bis(1′-pyrrolidonyl) ethane was not found.     

聚(4-乙酰基丙烯酰乙酸乙酯-co-丙烯酸)水凝胶的溶胀动力学以及温度敏感性研究

通过分子结构设计, 合成了疏水性单体4-乙酰基丙烯酰乙酸乙酯(AAEA), 并以该单体与丙烯酸(AA)进行自由基溶液共聚, 制备了P(AAEA-co-AA)新型温度敏感性水凝胶. AAEA的¹H NMR及FT-IR分析表明, 该单体主要以烯醇式结构存在; P(AAEA-co-AA)的FT-IR分析发现, PAAEA与PAA之间存在较强烈的氢键作用, 使得AAEA烯醇异构体中的C—O伸缩振动吸收峰移向了低波数处. 对冷冻干燥后凝胶的电镜分析发现, 当AAEA用量较高时, 由于凝胶内部分子链段的疏水聚集, 各部分溶胀度以及溶胀速度不均一而使得凝胶表面粗糙不平. 采用DSC对凝胶的体积相转变进行了研究, 结果表明, 该水凝胶的体积相转变温度(VPTT)在48.2至61.8 ℃之间, 并且随着AAEA用量的减小, 凝胶的VPTT逐渐增加. 对该新型温度敏感性水凝胶在去离子水中的溶胀动力学研究发现, 当AAEA用量高于4.6 g时, 凝胶属于Fick凝胶; 反之凝胶则属于非Fick凝胶. 该水凝胶在去离子水中具有良好的温度敏感性, 当外界温度低于VPTT时, 凝胶能保持溶胀状态; 而当外界温度高于VPTT时, 凝胶的平衡溶胀度迅速下降, 表现为温度敏感性. 进一步研究发现, 凝胶组成不仅会影响凝胶的VPTT, 而且会影响凝胶温度敏感性的强弱.     

Ion-induced white-light-emitting polymeric hydrogels with high mechanical strength and reversible stimuli-responsive properties

We have developed a facile strategy to fabricate model multicolor hydrogels via a straightforward mixing process of poly acrylonitrile-grafted methacrylamide (PANMAM), polymethacrylic acid (PMAA) and doped lanthanide (Eu/Tb) and zinc ions to form the interpenetrating dual-polymer gel networks. The hydrogels exhibit excellent tunability of multi-spectrum emission colors (including white light) by simply varying the stoichiometry of metal ions. Furthermore, taking the advantage of different metal ion response mechanisms, we have demonstrated the reversible acidity/alkalinity stimuli-responsive behaviors of white-light-emitting hydrogel (WLE gel). Meanwhile, the unique cross-linked network formed through hydrogen-bonding, metal-ligand coordination and ionic interaction is introduced to achieve favorable mechanical strength of hydrogels. These properties enable the possibility in obtaining fluorescent patterns on hydrogels, which are promising candidate for encrypted information with improved security.     

Study of cross-linking parameters of polyacrylic acid hydrogels

Swelling of modified polyacrylic acid hydrogels under conditions of a photoinitiated polymerization of acrylic acid to give a sealing hydrogel for fireproof multiple glazing units was studied. Mechanisms by which cross-links are formed in the gel are suggested and the possibility of controlling the degrees of swelling and cross-linking is discussed.     

Reinforcement of Self‐Healing Polyacrylic Acid Hydrogel with Acrylamide Modified Microcrystalline Cellulose†

Self‐healing hydrogel such as polyacrylic acid (PAA) hydrogel has attracted increasing attention based on its promising potential applications. However, it usually suffers from low strength especially as mechanical device. Herein, a commercial microcrystalline cellulose (MCC) was modified with acrylamide to graft polyacrylamide (PAM) chains on the particle surface. The acrylamide‐modified MCC (AM‐MCC) was then dispersed in monomer solution of acrylic acid to prepare composite hydrogel. The mechanical properties of the obtained composite hydrogels and the self‐healed hydrogels were carefully measured by compressive and tensile tests, and by dynamic mechanical analysis. Our results demonstrate that introduction of a small amount of AM‐MCC such as 3 wt% can not only reinforce the original hydrogel and the healed hydrogel markedly, but also improve self‐healing efficiency obviously. The analyses indicate that in addition to the reversible multi‐interactions such as hydrogen bonding and ionic interactions, the entanglements between the PAA chains of the hydrogel matrix and the PAM chains grafted on the MCC particles have also played an important role on the improvement in mechanical performances and the healing ability of the hydrogel. Moreover, the responsiveness to exterior ion has been tested to indicate potential application of the composite hydrogel as self‐healable sensor.     

Photocrosslinked hydrogels based on copolymers of poly(ethylene glycol) and lysine

A group of new, water-soluble poly(ether-urethane)s, derived from poly(ethylene glycol) and the amino acid L -lysine, provide pendent carboxylic acid groups along the polymer backbone at regular intervals. The carboxylic acid groups were utilized for the attachment of acrylate and methacrylate pendent chains (hydroxyethyl acrylate, hydroxyethyl methacrylate, aminoethyl methacrylate, and aminoethyl methacrylamide), leading to functionalized polymers. The pendent chains were attached via ester and/or amide bonds having different degrees of hydrolytic stability. The attachment reactions proceeded with high yields (up to 95%). The functionalized polymers were subsequently photopolymerized (UV irradiation) to obtain crosslinked hydrogels. Crosslinked membranes with the highest degree of mechanical strength were obtained when the crosslinking reaction was performed in dioxane with benzoin methyl ether (0.1 wt %) as the initiator. the crystallinity, thermomechanical properties, and hydrolytic stability of the crosslinked membranes were studied. All membranes were transparent and highly swellable (equilibrium water content: 64–88%). The tensile strength in the swollen state ranged from 0.15 to 1.09 MPa. Under physiological conditions (phosphate buffered water, 0.1M, pH 7.4, 37°C) the hydrolytic stability of the hydrogels varied depending on the bonds used in the attachment of the acrylate pendent chains: Hydrogels with hydroxyethyl acrylate pendent chains dissolved within 30 days, while hydrogels containing aminoethyl methacrylamide pendent chains remained unchanged throughout a 30 day period. Using high molecular weight FITC-dextrans as model compounds, complete release from the swollen hydrogels required between 60 and 150 h. Overall, the evaluation of poly(ethylene glycol)-lysine derived, photocrosslinked hydrogels indicated that these materials provide a range of potentially useful properties. © 1994 John Wiley & Sons, Inc.     

强韧型自愈合水凝胶的研究进展

水凝胶作为一种由大量水和与众不同的三维网状结构构成的智能软材料,已经广泛应用于许多领域,如药物输送、软骨修复、废物处理及电子设备等。然而,水凝胶不良的机械性能及自愈合性极大地限制了它们的潜在应用。目前已报道的韧性水凝胶通常不具有或只有很弱的自修复性,而自修复水凝胶通常机械性能非常弱。因此,研发具有高效自修复性能和优异机械性能的水凝胶材料,无论是从学术角度还是工业角度都是非常重要的。本文总结了近些年来强韧型自愈合水凝胶的最新研究进展,从其制备方法、性能等方面进行了简要介绍,并对未来的发展前景进行了展望。     

Swelling and scattering investigations on chemically cross-linked poly(vinyl alcohol) hydrogels

Swelling and scattering measurements are reported from chemically cross-linked polyvinyl alcohol) hydrogels and the corresponding semi-dilute polymer solutions. The mixing free energy in the swollen network is found to be significantly smaller than that of the corresponding polymer solution at identical concentration. Static light scattering and small-angle neutron scattering measurements indicate the presence of large-scale static structures in the solution. Reasonable agreement is found between the osmotic moduli obtained from light scattering measurements and macroscopic osmotic observations.     

PREPARATION AND PROPERTIES OF ETHYL-CYANOETHYL CELLULOSE/POLYACRYLIC ACID COMPOSITE FILMS WITH REFLECTION COLORS*

Ethyl-cyanoethyl cellulose [(E-CE)C]/acrylic acid (AA) becomes a cholesteric liquid crystalline solution withvivid colors when the (E-CE)C concentration is 42 wt%～52 wt%. (E-CE)C/polyacrylic acid (PAA) composites withcholesteric structure were prepared by polymerzing AA in (E-CE)C/AA liquid crystalline solutions. The layers of orderedpolymer chains in the cholesteric phase were inclined during polymerization and the degree of the inclination depended onthe polymerization temperature and the concentration of the solution before polymerization. The cholesteric structure in thecomposites could not be changed when temperature was lower than 100℃. Cross-linking of the PAA in compositesimproved their water-resistance. The cholesteric order of the composites without cross-linking was destroyed when theywhere immersed in water. The color derived from the selective reflection of the cholesteric phase of the cross-linkedcomposites turned from blue to red after the composites absorbed water. The color of the composites could be returned to theoriginal one when the absorbed water was removed from the swollen composites.