Synthesis, characterization, and sorption properties of silica gel-immobilized Schiff base derivative

Silica gel was derivatized with benzophenone 4-aminobenzoylhydrazone (BAH), a Schiff base derivative, after silanization of silica by 3-chloropropyltrimethoxysilane (CPTS) by using a reported method. Characterization of the surface modification was confirmed through infrared spectroscopy, thermogravimetry, and elemental analysis. The immobilized surface was used for Cu(II), Ni(II), Zn(II), and Co(II) sorption from aqueous solutions. The influence of the amount of sorbent, ion concentration, pH, and temperature was investigated. The sorption data followed Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) isotherms. The mean sorption energy (E) of benzophenone 4-aminobenzoylhydrazone (BAH) immobilization onto silica gel was calculated from D-R isotherms, indicating a chemical sorption mode for four cations. Thermodynamic parameters, i.e., DeltaG, DeltaS, and DeltaH, were also calculated for the system. From these parameters, DeltaH values were found to be endothermic: 27.0, 22.7, 32.6, and 34.6 kJ mol(-1) for Cu(II), Ni(II), Co(II), and Zn(II) metal ions, respectively. DeltaS values were calculated to be positive for the sorption of the same sequence of divalent cations onto sorbent. Negative DeltaG values indicated that the sorption process for these three metal ions onto immobilized silica gel is spontaneous.     

Sorption of Cobalt on Modified Silica Gel Materials

Various silica gel materials were chemically modified with imidazole, diaza-18-crown-6 (DA18C6) and dibenzod-18-crown-6 (DB18C6). The degree of functionalization of the covalently attached molecule was calculated from C, H, N analysis and ranged between 0.270 and 0.552 mmol/g (for sorbents with imidazole) and between 0.043 and 0.062 mmol/g (for sorbents with DA18C6 and DB18C6). The degree of functionalization depends on the reflux time and silica gel matrix used. Experimental sorption capacity ranged between 0.038 and 0.228 mmol/g (for sorbents with imidazole) and between 0.019 and 0.050 mmol/g (for sorbents with DA18C6 and DB18C6). Synthesized hexagonal mesoporous silica matrix MCM-41 with uniform pore diameter <40 Å was used too. Change of pore diameters of silica gel support to larger pores should have a positive influence on access of cobalt ion to sorption centers to increase of sorption capacity of sorbents. The sorption kinetics of cobalt and the influence of cobalt concentration, pH of various kinds of silica gel matrix with immobilized imidazole group in static conditions on sorption were measured. The sorption of cobalt in various conditions (pH, contact time of phases) with constant liquid-solid ratio (V/m = 50 ml/g) was studied. The distribution coefficients ranged between 200 and 50 000 ml/g (for imidazole), 85 and 120 ml/g (for DB18C6) and between 230 and 500 ml/g (for DA18C6) according to silica gel matrix used and according to the method of sorbent preparation. pH plays important role in the sorption of cobalt on prepared sorbents with immobilized crown ethers due to protonization of crown ethers. Protons significantly competes to sorption of cobalt in acidic solutions. The influence of presence of other heavy or toxic metals (Hg(II), Cd(II), Mn(II), Zn(II), Cu(II), Fe(III), Cr(III), Al(III) and the influence of sodium and potassium on sorption Co(II) from aqueous solutions was investigated. Sorption of cobalt decreases in order Hg > Cu > Cd > Zn, Fe > Mn > Al, Cr. The presence of sodium and potassium ions at concentration 0.05 mol/l significantly influences on the sorption of cobalt with sorbent with immobilized DB18C6 functional group.     

Physicochemical and Sorption Properties of Silica Gel with Immobilized Xylenol Orange Surface Groups

Organomineral sorbents were prepared by sorption immobilization of Xylenol Orange on the surface of two different samples of silica gel from aqueous solutions with pH 1.68 under static conditions. The diffusion coefficients of Xylenol Organe in the near-surface layer of silica gel and the equilibrium sorption constants were determined. Wash-out of the dye from the sorbent was studied. Sorption of Cu(II), Zn(II), and Pb(II) on the sorbents from aqueous solutions with pH 5.8 was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 1, 2005, pp. 73–78.Original Russian Text Copyright © 2005 by Korneev, Kholin.     

Some aspects of estimation of extraction selectivity under the conditions of competitive sorption on modified silica gels

Systematic studies of silica gels with covalently immobilized thiosemicarbazide and formazan groups under the conditions of competitive sorption from multicomponent systems were conducted. A methodological approach to determine the selectivity of the modified sorption material with regard to Cu(II), Ni(II), Co(II), Cd(II), and Zn(II) was proposed. Solid-phase extraction in equilibrium conditions of Cu(II), Zn(II), Co(II), Cd(II), and Ni(II) on a silica gel with covalently immobilized thiosemicarbazide and formazan groups in the conditions of competitive sorption was studied. The possibility to use the pseudo-second-order kinetic equation for assessment of mutual influence at competitive sorption has been shown. We found that sorption from multicomponent solutions proceeds as a non-additive process under the conditions of an excess of functional groups.

Open image in new window

     

Synthesis, characterization and structure effects on selectivity properties of silica gel covalently bonded diethylenetriamine mono- and bis-salicyaldehyde and naphthaldehyde Schiff(,)s bases towards some heavy metal ions

Four silica gel-immobilized new metal chelate Schiff(,)s bases were synthesized (I-IV). Silica gel chemically bonded diethylenetriamine mono-naphthaldehyde and mono-salicyaldehyde Schiff's bases (phases I and III) were produced via the interaction of silica gel-modified diethylenetriamine with naphthaldehyde and salicylaldehyde, respectively. However, phases II and IV arose through the interaction of bis-naphthaldehyde and bis-salicylaldehyde Schiff(,)s bases of diethylenetriamine with 3-chloropropyltrimethoxysilane modified silica gel. The characterization of such new phases, their capabilities towards selective extraction or separation of Fe(III), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) ions were studied and evaluated by both batch and column techniques as a function of pH and time of contact. Phases III and I showed high performance towards Cu(II) extraction, where their Cu(II) sorption determined to be 0.957 and 0.940 mmol g(-1), respectively. However, for phases IV and II, the great affinity was devoted to Fe(III) extraction followed by Cu(II) ions. The reactivity of metal ion sorption was discussed in the light of effects of bulkiness as well as orientation of immobilized chelate on sorbent reactivity. Donor sites of phases III and I (diethylenetriamine and azomethene nitrogens along with phenolic hydroxyl group oxygen) are fully active, whereas phases IV and II are partially active with only participation of oxygen and azomethene nitrogen. The order of increasing thermal stability (IV相似文献   

Determination of gold,palladium and copper by flame atomic absorption spectrometry after preconcentration on silica gel modified with 3-(2-aminoethylamino)propyl group

A preconcentration method of gold, palladium and copper based on the sorption of Au (III), Pd (II) and Cu (II) ions on a column packed with 3-(2-aminoethylamino)propyl bonded silica gel is described. The modified silica gel was synthesized and characterized by FT-IR and C, H, N elemental analysis. At column preconcentration, the effects of parameters such as pH, volume, flow rate, matrix constituents of solutions and type of eluent on preconcentration of gold, palladium and copper were studied. The recoveries of Au (III), Pd (II) and Cu (II) were 98.93±0.51, 98.81±0.36 and 99.21±0.42 % at 95 % confidence level, respectively. The detection limits (δ) of the elements were 0.032, 0.016 and 0.012 μg ml⁻¹, respectively. The preconcentration method was applied for determination of gold and palladium in certified reference material SARM 7B and copper in river and synthetic seawater by FAAS. Gold, palladium and copper were determined with relative error lower than 10 %.     

Silica gel surface modified with sulfanilamide for selective solid-phase extraction of Cu(II), Zn(II) and Ni(II)

A new chelating matrix has been prepared by immobilising sulfanilamide (SA) on silica gel (SG) surface modified with 3-chloropropyltrimethoxysilane as a sorbent for the solid-phase extraction (SPE) Cu(II), Zn(II) and Ni(II). The determination of metal ions in aqueous solutions was carried out by inductively coupled plasma optical emission spectrometry (ICP-OES). Experimental conditions for effective sorption of trace levels of Cu(II), Zn(II) and Ni(II) were optimised with respect to different experimental parameters using the batch and column procedures. The presence of common coexisting ions does not affect the sorption capacities. The maximum sorption capacity of the sorbent at optimum conditions was found to be 34.91, 19.07 and 23.62 mg g^?1 for Cu(II), Zn(II) and Ni(II), respectively. The detection limit of the method defined by IUPAC was found to be 1.60, 0.50 and 0.61 µg L^?1 for Cu(II), Zn(II) and Ni(II), respectively. The relative standard deviation (RSD) of the method under optimum conditions was 4.0% (n = 8). The method was applied to the recovery of Cu(II), Zn(II) and Ni(II) from the certified reference material (GBW 08301, river sediment) and to the simultaneous determination of these cations in different water samples with satisfactory results.     

Use of aminoprophyl silica-immobilized humic acid for Cu(II) ions removal from aqueous solution by using a continuously monitored solid phase extraction technique in a column arrangement

Humic acid (HA) which originated from Leonardite was purified and immobilized onto aminoprophyl silica (APS). Afterwards, the remaining amino groups on the silica are successfully end-capped using acetic anhydride in DMF media and this material was used for Cu(II) ions removal from aqueous solution by using continuously solid phase extraction (SPE) technique in a column arrangement. The sorption characteristics of Cu(II)-immobilized humic acid (ImHA) system were investigated at various experimental conditions, and output was observed by a UV detector. All solid phase extraction (SPE) steps were monitored through breakthrough curves used to visualize distribution of Cu(II) concentration between mobile phase and solid phase. In addition to this, the solutions collected from stripping steps were analyzed in atomic absorption spectrophotometry (AAS) and the amount of adsorbed Cu(II) ions was calculated. It was found that there was a high correlation (R² = 1) between the peak area and AAS data of stripping steps. Sorption characteristics were evaluated by using Freundlich, Langmuir, and Dubinin–Radushkevich (D-R) adsorption isotherms, as well as by Scatchard plot analysis. Thus, the sorption characteristics and usability of ImHA as a solid phase for SPE of Cu(II) ions was evaluated in detail. From the obtained results, it was seen that sorption mechanism of Cu(II) fits to Langmuir model on a large scale, sorption was thought to be localized. From D-R isotherm mean free energy of sorption (E) was calculated (17.68 kJ mol⁻¹), and it was deduced that chemical interactions were more effective than physical interactions for Cu(II). This investigation provides a new, environmentally friendly and cost-effective possibility to remove Cu(II) ions from aqueous solution by using the new APS-ImHA material.     

X-Ray fluorescence determination of trace toxic metals with extraction and preconcentration on silica gel chemically modified with mercapto groups

The sorption properties of silica gel with γ-mercaptopropyl groups chemically immobilized on its surface toward Pb(II), Cd(II), and Zn(II) at MPC levels in natural water in Ukraine were studied. The mutual effect of Pb(II), Cd(II), and Zn(II) in the sorption-X-ray fluorescence determination of their trace amounts with preextraction on silica gel with γ-mercaptopropyl groups was examined     

Adsorption of metal halides from ethanol solutions by a 3-n-propylpyridiniumsilsesquioxane chloride-coated silica gel surface

3-n-propylpyridiniumsilsesquioxane chloride polymer, abbreviated as SiPy+Cl-, was used to coat a porous silica gel, SiO2, surface to form the chemically modified solid SiO2/SiPy+Cl-. The resulting polymer film was well adhered to the surface and presented an ion exchange capacity of 0.74 mmol g(-1). Metal halides, MClz [M=Fe(III), Cu(II), and Zn(II)], were adsorbed by the modified solid from ethanol solutions as neutral species by forming the surface anionic complexes described by the equation: mSiO2/SiPy+Cl-+ MClz <=> (SiO2/SiPy+)m[MCl(z+m)]m-, where the [MCl(z+m)]m- species adsorbed on the surface are FeCl4-, ZnCl4(2-), and CuCl4(2-). Accurate estimates of the specific sorption capacities and the heterogeneous stability constants of the immobilized metal complexes were determined with the aid of computational procedures.     

Determination of Fe(II), Cu(II) and Ag(I) by using silica gel loaded with 1,10-phenanthroline

The modified silica gel with 1,10-phenanthroline adsorbed was obtained. The adsorption from aqueous solutions onto loaded silica gel of Fe(II), Cu(II) and Ag(I) and their complexes was studied. The loaded silica gel was applied to Fe(II), Cu(II) and Ag(I) reflectance spectroscopy determinations in water (detection limits 0.08, 0.03 and 0.01 ppm respectively). Visual test scales for Fe, Cu and Ag ion determinations in water were worked out.     

Selective Pre-concentration and Solid Phase Extraction of Mercury（Ⅱ） from Natural Water by Silica Gel-loaded （E）-N-（1-Thien-2＇-ylethylidene）-1,2-phenylenediamine Phase

Silica gel-loaded （E）-N-（1-thien-2＇-ylethylidene）-1,2-phenylenediamine （TEPDA） phase was synthesized based on physical adsorption approaches. The stability of a chemically modified TEPDA especially in concentrated hydrochloric acid that was then used as a recycling and preconcentration reagent allowed the further uses of silica gel-loaded immobilized TEPDA phase. The application of this silica gel-loaded phase to sorption of a series of metal ions was performed by using different controlling factors such as the pH of the metal ion solution and the equilibration shaking time by the static technique. This difference was interpreted on the basis of selectivity incorporated in these sulfur containing silica gel-loaded TEPDA phases. Hg（Ⅱ） was found to exhibit the highest affinity towards extraction by these silica gel-loaded TEPDA phases. The pronounced selectivity was also confirmed by the determined distribution coefficients （Kd） of all the metal ions, showing the highest value reported for mercury（Ⅱ） extraction by the silica gel immobilized TEPDA phase. The potential applications of the silica gel immobilized TEPDA phase to selective extraction of mercury（Ⅱ） from aqueous solution were successfully accomplished and preconcentration of low concentration of Hg（Ⅱ） （30 pg·mL^-1） from natural tap water with a preconcentration factor of 200 for Hg（Ⅱ） off-line analysis was conducted by cold vapor atomic absorption analysis.     

Silica gel-immobilized-dithioacetal derivatives as potential solid phase extractors for mercury(II)

Dithioacetal derivatives with different para-substituents, XH, CH(3), OCH(3), Cl and NO(2) were synthesized and chemically immobilized on the surface of silica gel for the formation of five newly synthesized silica gel phases (I-V). Characterization of the silica gel surface modification by the organic compounds was accomplished by both the surface coverage determination as well as the infrared spectroscopic analysis. The metal sorption properties of the silica gel phases were studied to evaluate their performance toward metal-uptake, extraction and selective extraction processes of different metal ions from aqueous solutions based on examination of the various controlling factors. The studied and evaluated factors are the pH effect of metal ion solution on the metal capacity values (mmol g(-1)), equilibration shaking time on the percent extraction as well as the structure and substituent (X) effects on the determined mmol g(-1) values. The results of these studies revealed a general rule of excellent affinity of these silica gel phases-immobilized-dithioacetal derivatives for selective extraction of mercury(II) in presence of other interfering metal ions giving rise to a range of 94-100% extraction of the spiked mercury(II) in the metal ions mixture. The potential application of the newly synthesized silica gel phases (I-V) for selective extraction of mercury(II) from two different natural water samples, namely sea and drinking tap water, spiked with 1.0 and 10.0 ng ml(-1) mercury(II) were also studied by column technique followed by cold vapour atomic absorption analysis of the unretained mercury(II). The results indicated a good percent extraction and removal (90-100+/-3%) of the spiked mercury(II) by all the five silica gel phases. In addition, insignificant contribution by the matrix effect on the processes of selective solid phase extraction of mercury(II) from natural water samples was also evident.     

Sorption of Cu(II) onto silica gel immobilized calix[4]arene derivative with tripodal structure

This study contains the synthesis of silica gel-immobilized calix[4]arene derivative (TR-CL[4]P) as a new sorbent and its sorption studies towards Cu (II) ion in aqueous solution. The aldehyde pointed calix[4]arene derivative 5 was synthesized and then it was immobilized onto 3-aminopropilsilica gel (APS). In batch sorption experiments, the experimental results showed that TR-CL[4]P is effective sorbent towards Cu (II) ion. Therefore, the effect of solution pH, sorption time, temperature and initial metal ion concentration onto Cu (II) sorption was investigated. Maximum Cu(II) removal was obtained at 30?°C, 30?min and pH 6.0 for TR-CL[4]P and the batch sorption capacity was found as 17.8?mg/g. The characteristics of the sorption process for Cu (II) ion were evaluated by using the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) adsorption isotherms. Also, thermodynamic parameters, i.e., ΔG, ΔS, and ΔH were calculated for the system.     

8-Hydroxyquinoline anchored to silica gel via new moderate size linker: synthesis and applications as a metal ion collector for their flame atomic absorption spectrometric determination

The silica gel modified with (3-aminopropyl-triethoxysilane) was reacted with 5-formyl-8-hydroxyquinoline (FHOQ_x) to anchor 8-quinolinol ligand on the silica gel. It was characterised with cross polarisation magic angle spinning (CPMAS) NMR and diffuse reflectance infrared Fourier transformation (DRIFT) spectroscopy and used for the preconcentration of Cu(II), Pb(II), Ni(II), Fe(III), Cd(II), Zn(II) and Co(II) prior to their determination by flame atomic absorption spectrometry. The surface area of the modified silica gel has been found to be 227 m² g⁻¹ and the two pKa values as 3.8 and 8.0. The optimum pH ranges for quantitative sorption are 4.0–7.0, 4.5–7.0, 3.0–6.0, 5.0–8.0, 5.0–8.0, 5.0–8.0 and 4.0–7.0 for Cu, Pb, Fe, Zn, Co, Ni and Cd, respectively. All the metals can be desorbed with 2.5 mol l⁻¹ HCl or HNO₃. The sorption capacity for these metal ions is in range of 92–448.0 μmol g⁻¹ and follows the order Cd3, NaCl, NaBr, Na₂SO₄ and Na₃PO₄, glycine, sodium citrate, EDTA, humic acid and cations Ca(II), Mg(II), Mn(II) and Cr(III) in the sorption of all the seven metal ions are reported. The preconcentration factors are 150, 250, 200, 300, 250, 300 and 200 for Cd, Co, Zn, Cu, Pb, Fe and Ni, respectively and t_1/2 values <1 min except for Ni. The 95% extraction by batch method takes ≤25 min. The simultaneous enrichment and determination of all the metals are possible if the total load of the metal ions is less than sorption capacity. In river water samples all these metal ions were enriched with the present ligand anchored silica gel and determined with flame atomic absorption spectrometer (R.S.D.≤6.4%). Cobalt contents of pharmaceutical samples (vitamin tablet) were preconcentrated with the present chelating silica gel and estimated by flame AAS, with R.S.D.1.4%. The results are in the good agreement with the certified value, 1.99 μg g⁻¹ of the tablets. Iron and copper in certified reference materials (synthetic) SLRS-4 and SLEW-3 have been enriched with the modified silica gel and estimated with R.S.D.<5%.     

Determination of Cu(II) and Zn(II) using silica gel loaded with 1-(2-thiasolylazo)-2-naphthol

The silica gel with 1-(2-thiasolylazo)-2-naphthol adsorbed was obtained. The adsorption of Cu(II) and Zn(II) from an aqueous solution onto loaded silica gel was studied. The capabilities of 1-(2-thiasolylazo)-2-naphthol immobilized for Cu(II) and Zn(II) preconcentration, visual and diffusion reflectance spectroscopic detection was evaluated. The detection limits were 10 and 15 microg.l(-1), respectively. Visual test scales for metal ions determination in the range 0.65-13 microg per sample were worked out. The developed methods were applied to Cu(II) and Zn(II) determination in natural and tap water. The obtained results agreed well with the reported value.     

Complexation of transition metals with 8-hydroxyquinoline chemically immobilized on the surface of a silica gel-polyaniline composite

The complex-forming properties of a silica gel-polyaniline composite with 8-hydroxyquinoline covalently immobilized by the Mannich reaction with respect to Pb(II), Cd(II), Cu(II), Ni(II), Co(II), Al(III), Fe(III), and Mo(VI) ions were studied. The resulting adsorbent had a high sorption capacity and satisfactory kinetic characteristics, which allowed us to use it for the separation or preconcentration of transition metal ions. Data on the composition and structure of the test metal complexes with 8-hydroxyquinoline immobilized on the composite surface were obtained from an analysis of electronic diffuse reflectance spectra and corresponding adsorption isotherms.     

Thioacetamide chemically immobilized on silica gel as a solid phase extractant for the extraction and preconcentration of copper(II), lead(II), and cadmium(II)

Thioacetamide immobilized on silica gel was prepared via the Mannich reaction. The extraction and enrichment of copper(II), lead(II), and cadmium(II) ions from aqueous solutions has been investigated. Conditions for effective extraction are optimized with respect to different experimental parameters in both batch and column processes prior to their determination by flame atomic absorption spectrometry (FAAS). The optimum pH ranges for quantitative adsorption are 4.0-8.0, 2.0-7.0, and 5.0-10.0 for Pb(II), Cu(II), and Cd(II), respectively. Pb(II) and Cd(II) can be desorbed with 3 mol/L and 0.1 mol/L HCl/HNO3, and Cu(II) can be desorbed with 2.5% thiourea. The adsorption capacity of the matrix has been found to be 19.76, 16.35, and 12.50 mg/g for Pb(II), Cu(II), and Cd(II), respectively, with the preconcentration factor of approximately equal to 300 for Pb(II) and approximately equal to 200 for Cu(II) and Cd(II). Analytical utility is illustrated in real aqueous samples generated from distilled water, tap water, and river water samples.     

Synthesis and Metal Collecting Properties of Mono,Di, Tri and Tetramine Based on Silica Gel Matrix

Abstract

Silica gels, chemically modified with mono, di, tri and tetramine (I - IV), were synthesized. The monoamine (I) was produced directly via the reaction of silica gel with 3-aminopropyltrimethoxysilane. The diamine (II), triamine (III) and tetramine (IV) were produced through the reaction of ethylenediamine (EDA), diethylenetriamine (DETA) and triethylenetetramine (TETA) with 3-chloropropyltrichloromethane modified silica gel, respectively. The sorption properties of the phases (I - IV) toward Co(II), Ni(II), Cu(II), Zn(II), Cd(II) and Pb(II) were investigated at different pH-values based on the batch equilibrium technique, The, metal uptake capacities (mmol/g) were determined and discussed in terms of the structure of the aliphatic amines and the increasing number of nitrogen donor atoms. The metal capacity values demonstrate the higher efficiency of phases III and IV than phases I and II for preconcentration of such metal ions. Moreover, the use of phases III and IV for selective extraction of Cu(II) and Ni(II) is promising.     

Enrichment of iron(III), cobalt(II), nickel(II), and copper(II) by solid-phase extraction with 1,8-dihydroxyanthraquinone anchored to silica gel before their determination by flame atomic absorption spectrometry

A chelating matrix prepared by immobilizing 1,8-dihydroxyanthraquinone on silica gel modified with 3-aminopropyltriethoxysilane has been characterized by use of cross-polarization magic angle spinning (CPMAS) NMR, diffuse reflectance infrared Fourier transformation (DRIFT) spectroscopy, and thermogravimetric analysis and used to preconcentrate Fe(III), Co(II), Ni(II), and Cu(II) before their determination by flame atomic absorption spectrometry. The optimum pH ranges for quantitative sorption are 6.5-8.0, 6.0-7.0, 6.0-8.0, and 7.0-8.5 for Cu, Fe, Co, and Ni, respectively. All the metal ions can be desorbed with 2 mol L(-1) HCl or HNO3. The sorption capacity ( micromol g(-1) matrix) and preconcentration factor were 226.6, 250; 365.6, 300; 101.8, 150; and 109.0, 250 for Cu, Fe, Co, and Ni, respectively. The lowest concentration for quantitative recovery was 4.0, 3.3, 6.6, and 4.0 ng mL(-1), respectively for the four metal ions. The limits up to which electrolytes NaNO3, NaCl, NaBr, Na2SO4, and Na3PO4 and cations Ca(II) and Mg(II) can coexist with the four metal ions during their sorption without adverse effect are reported. The simultaneous enrichment and determination of all the four metals is possible if the total load of metal ions is less than the sorption capacity. Flame AAS was used to determine the metal ions in underground, tap, and river water samples (RSD相似文献