A new surface roughening method for glass capillary columns. Sodium chloride deposition from suspension

A method is described for roughening the surface of glass capillary columns for subsequent coating with polar stationary phases. A suspension of sodium chloride, obtained by addition of a saturated solution of sodium chloride in methanol to 1,1,1-trichloroethane, is passed through the column at velocities of 1–5 cm/s. During passage of the suspension, particles of sodium chloride deposit spontaneously on the column wall. The amount of sodium chloride deposited on the column wall is a function of the volume of the suspension passed through and of the contact time of the suspension and the column wall. Ultimately the amount of sodium chloride per unit surface area approaches a maximum. Columns covered with this maximum amount of sodium chloride were prepared with high reproducibility and coated with a number of polar stationary phases. Various factors that influence the stability of the suspension and the deposition of sodium chloride are discussed and minimum requirements are given. A theoretical model is proposed for the mechanism of deposition of sodium chloride particles on the glass wall.     

Preparation and characterization of magnetic polymeric composite particles by miniemulsion polymerization

A water‐based magnetite ferrofluid, with an average size of about 10 nm, was prepared in a first step by the chemical coprecipitation of ferrous and ferric salts. Oil‐based styrene (St) magnetite ferrofluid was obtained by the acidification of the water‐based magnetite ferrofluid and the dispersion of the acidified magnetite in St. Magnetic polymeric composite particles (MPCPs) were prepared by miniemulsion polymerization in the presence of the oil‐based St magnetite ferrofluid with hexadecane as a hydrophobe, 2,2′‐azobisisobutyronitrile as an initiator, and sodium dodecyl sulfate as an emulsifier. Methacrylic acid was used as a comonomer, and hydroxyethyl cellulose and polyvinylpyrrolidone were used as aid stabilizers subsequently. With the aim of improving the encapsulation degree of magnetite, avoiding pure polymer particles and exposed magnetite particles, and obtaining the narrowest particle size distributions, the encapsulation conditions of magnetite were investigated in detail. The results show that miniemulsion polymerization is an effective method for encapsulating magnetite into a hydrophobic polymer successfully. Exposed magnetite particles and pure polymer particles can be avoided completely by the selection of the appropriate preparation conditions. All the resulting MPCPs exhibited superparamagnetism and possessed some magnetic response. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 4187–4203, 2006     

Manipulation and characterization of aqueous sodium dodecyl sulfate/sodium chloride aerosol particles

Aerosol optical tweezers coupled with Raman spectroscopy can allow the detailed investigation of aerosol dynamics. We describe here measurements of the evolving size, composition, and phase of single aqueous aerosol droplets containing the surfactant sodium dodecyl sulfate and the inorganic salt sodium chloride. Not only can the evolving wet particle size be probed with nanometer accuracy, but we show that the transition to a metastable microgel particle can be followed, demonstrating that optical tweezers can be used to manipulate both spherical and non-spherical aerosol particles. Further, through the simultaneous manipulation and characterization of two aerosol droplets of different composition in two parallel optical traps, the phase behavior of a surfactant-doped particle and a surfactant-free droplet can be compared directly in situ. We also illustrate that the manipulation of two microgel particles can allow studies of the coagulation and interaction of two solid particles. Finally, we demonstrate that such parallel measurements can permit highly accurate comparative measurements of the evolving wet particle size of a surfactant-doped droplet with a surfactant-free droplet.     

Colloidal metal dispersions and metal complexes in hydrocarbons

Stable dispersions of colloidal metals in hydrocarbons have been prepared by a novel phase-transfer method. The metals were gold, silver, palladium and ruthenium; the hydrocarbons were n-hexane, cyclohexane and benzene. The phase transfer of colloidal metal particles from an aqueous phase to a hydrocarbon phase was achieved by adding salt to the emulsion of hydrocarbon in the aqueous suspension of metal with sodium oleate. The salts were sodium chloride, magnesium chloride, sodium sulfate, etc. The size distributions of the metal particles in the resulting hydrocarbon suspensions were almost the same as that of the original aqueous suspension. The dispersions of colloidal metals in hydrocarbons were stable for a long period of time without the addition of hydrocarbon-soluble stabilizer. The critical phase-transfer concentrations of various salts were determined. The phase-transfer powers of cations were larger than those of anions. Those of divalent and trivalent cations were exceedingly larger than that of the monovalent cation. The concentration of colloidal metal dispersed in hydrocarbon was achieved by using the phase-transfer method.     

Size‐controllable synthesis of polymeric iodine‐carrying nanoparticles for medical CT imaging

Iodine‐carrying nanopolymers with particle sizes ranging from 30 to 930 nm were synthesized by microemulsion polymerization. 2‐Methacryloyloxyethyl(2,3,5‐triiodobenzoate) was used as the monomer. Different surfactants were tested to control the particle size. Cetyltrimethylammonium bromide and cetyltrimethylammonium chloride were used as cationic surfactants, and sodium oleate and sodium dodecyl sulfate acted as anionic surfactants. The influences of various reaction parameters, e.g. the amount of surfactant, amount of initiator, and the reaction temperature, were investigated. The particle size was highly adjustable through variation of the reaction parameters. The particles were imaged with an atomic force microscope. In addition, particle workup for further medical application was explored. The particles provided good visible computer tomography contrast. Copyright © 2017 John Wiley & Sons, Ltd.     

壳聚糖-海藻酸盐纳米粒子的制备及其对BSA的载药与释放特性

带相反电荷的聚电解质在水溶液中能通过静电相互作用自组装形成壳聚糖-海藻酸盐纳米粒。利用动态光散射纳米粒度分析仪考察了钙离子及壳聚糖对粒子粒径的影响。结果表明：钙离子的存在可使粒子粒径从268．5nm降为203．4nm,但随着钙离子含量的继续升高,粒径迅速增大,当钙离子浓度大于0．45g／L时形成凝胶。壳聚糖含量的增加和蛋白的包裹均会使粒径增大。所制备的纳米粒对BSA具有较高的包栽能力,并有一定的缓释作用。当壳聚糖投料量增加时,可使BSA在pH=7．4的PBS中的释放减慢。     

Modified reverse microemulsion synthesis for iron oxide/silica core–shell colloidal particles

Iron oxide/silica core–shell colloidal particles were prepared by basic reverse microemulsion (RM) method and two modified RM methods. By basic RM method, maximum particle size obtained was mere 40 nm. For building photonic crystals working in the visible range, the colloidal particles must be larger than 100 nm. Thus two modified RM methods were used. By alcohol modified RM method, short chain alcohols were used as co-surfactant. The particle size rose to near 100 nm, but the core–shell structure was comparatively poor. By emulsifier pair modified RM method, the particle size leapt to over 200 nm and a narrow growth window was found favorable to enhance the stability and rigidity of the surfactants layers. The core–shell mechanism was also discussed and a new four-step mechanism was proposed.     

动态光散射法测量颗粒粒径的溯源性

分别对动态光散射粒径测量仪的入射波长、散射角度、测量池温度进行校准,并对影响测量结果准确性各因素的不确定度分量进行了评价,校准后动态光散射仪的测量结果可溯源至国家计量标准。为消除多重散射、颗粒间相互作用、颗粒粒径分布对动态光散射测量结果的影响,建立了动态光散射测量结果修正方法。其中为消除多重散射及颗粒间相互作用的影响,需采用多浓度测量或线性回归的方法得到特定浓度下的颗粒粒径;为修正颗粒粒径分布对动态光散射测量结果的影响,需先采用SEM方法准确测量颗粒粒径分布,然后根据光强加权动力学平均粒径和数量平均粒径的理论公式,得到二者之间的差异。     

Synthesis of Highly Dispersed Zirconium Diboride for Fabrication of Special-Purpose Ceramic

Reduction of zirconium dioxide with boron carbide and nanofibrous carbon in argon yielded a highly dispersed powder of zirconium diboride. Characteristics of zirconium diboride powders were examined by various analytical methods. The material obtained is represented by a single phase, zirconium diboride. Powder particles are for the most part aggregated. The average size of particles and aggregates is 10.9–12.9 μm with a wide size distribution. The specific surface area of the samples is 1.8–3.6 m² g^–1. The oxidation of zirconium diboride begins at a temperature of 640°C The optimal synthesis parameters were determined: ZrO₂: B₄C: C molar ratio of 2: 1: 3 (in accordance with stoichiometry), process temperature 1600–1700°C, synthesis duration 20 min.     

POLYMERIC NANOPARTICLES FROM SUPERCRITICAL CO2 MICROEMULSION POLYMERIZATION

Herein, we reported the microemulsion polymerization in supercritical carbon dioxide. With the aid of an anionic phosphate fluorosurfactant （bis-[2-（F-hexyl）ethyl]phosphate sodium）, water-soluble/CO2-insoluble acryloxyethyltrimethyl ammonium chloride monomer and N,N＇-methylene-bisacrylamide cross-linker were solubilized into CO2 continuous phase via the formation of water-in-CO2 （w/c） microemulsion water pools. Initiated by a CO2-soluble initiator, 2,2＇-azo-bisisobutyronitrile （AIBN）, cross-linked poly（acryloxyethyltrimethyl ammonium chloride） particles were produced and stabilized in these w/c internal water pools. Nano-sized particles with sizes less than 20 nm in diameter and narrow particle size distributions were obtained.     

氢化铝锂新合成方法的研究

在略高溫度下,通过氯化锂和金属钠在氫气氛中的反应,得到了氢化锂和氯化钠的混合物。用通常的Schlesinger法将得到的混合物用于合成氢化铝锂。反应的副产物是氯化锂和氯化钠的混合物,可用不同方法将其分离,所得氯化锂用于再循环。     

Effect of sodium citrate on preparation of nano-sized cobalt particles by organic colloidal process

Nano-sized cobalt particles with the diameter of 2 nm were prepared via an organic colloidal process with sodium formate, ethylene glycol and sodium citrate as the reducing agent, the solvent and the complexing agent, respectively. The effects of sodium citrate on the yield, crystal structure, particle size and size distribution of the prepared nano-sized cobalt particles were then investigated. The results show that the average particle diameter decreases from 200 nm to 2 nm when the molar ratio of sodium citrate to cobalt chloride changes from 0 to 6. Furthermore, sodium citrate plays a crucial role in the controlling of size distribution of the nano-sized particles. The size distribution of the particle without sodium citrate addition is in range from tens of nanometers to 300 or 400 nm, while that with sodium citrate addition is limited in the range of (2±0.25) nm. Moreover, it is found that the addition of sodium citrate as a complex agent could decrease the yield of the nano-sized cobalt particle. __________ Translated from Journal of South China University of Technology, 2008, 36(3) (in Chinese)     

Preparation of sterically stabilized nanoparticles by desolvation from graft copolymers

A new method is described for the preparation of sterically stabilized nanoparticles of defined size and polydispersity which are stabilized in aqueous solution by the presence of covalently linked monomethoxy–poly (oxyethylene) (MeOPOE) chains. The nanoparticles (100–270 nm mean diameter) were prepared by a process of desolvation of a graft copolymer prepared from poly(2-aminoethylmethacrylate) (PAEMA) and MeOPOE. Reproducible desolvation was achieved by the addition of sodium phosphate buffer to the copolymer in aqueous solution to give particles which were crosslinked in situ with the addition of glutaraldehyde. The size (mean diameter) and polydispersity (Q) of the particles were determined by Photon Correlation Spectroscopy (PCS). The temperature at which the desolvation reaction was performed was found to influence the particle size; at low temperatures (5–12°C), small particles were produced (99–121 nm, Q = 0.090–0.121), whereas at much higher temperatures (40–55°C), particles as large as 224–275 nm (Q = 0.138–0.127) were generated. Other parameters such as the graft copolymer concentration, the amount of glutaraldehyde added, the pH of the sodium phosphate buffer added, and the reaction time were found to be of relative insignificance in influencing the particle size. In addition to those involved in drug delivery, our method of nanoparticle preparation may be of interest to those engaged in the preparation of particulate materials and colloidal dispersions for other specific applications (e.g. stabilized photographic emulsions).     

Determination of sulfate and chloride ions in highly saline oilfield water by capillary electrophoresis using bilayer-coated capillaries and indirect absorption detection

Analysis of highly saline oilfield waters for anions presents challenges. Traditional analytical techniques used for such analysis tend to suffer from both poor sensitivity and selectivity due to the high concentrations of salt present in the samples. A capillary electrophoresis method was developed for the simultaneous determination of chloride and sulfate anions which is relevant to the oilfield analysis industry and of economic value. Due to the extremely high concentrations of chloride in highly saline oilfield waters, it is difficult to achieve baseline electrophoretic separation necessary for accurate quantitation. By using a capillary with a noncovalently bound bilayer coating using Polybrene, a cationic polymer and sodium dodecyl sulfate (SDS), an anionic surfactant and a buffer consisting of 50 mM TRIS, 30 mM SDS, 5% methanol and 26 mM chromium trioxide (CrO₃) at pH 6.7, baseline separation (R_s > 1.5) of chloride and sulfate was achieved. To mimic possible oilfield water samples, model water solutions of 5%, 10%, 15% and 20% chloride containing low ppm sulfate were prepared and successfully analysed using the method developed. In addition, the method was applied to determine chloride and sulfate anions in highly saline oilfield water samples. The accuracy of the method developed was verified by analysing NIST certified standards of chloride and sulfate. The results obtained for chloride and sulfate with the indirect CE-UV method were in close agreement (94–100% accuracy; <2.5% relative standard deviations) with those of the certified standard analysed by ion chromatography.     

Deposition of gallium oxide nanodots prepared from metal‐assembling dendrimer molecules isolated by the spacing of the nonmetal‐assembling dendrimer molecules in the two‐dendrimers mixture monolayer

Phenylazomethine dendrimers (DPA) can precisely incorporate metal chlorides onto the imine sites in a stepwise fashion. Such precise dendrimer–metal complexes allow the preparation of size‐controlled subnanometer metal particles. We now propose a novel approach for the fabrication of size‐controlled subnanometer metal oxide dots isolated on a substrate using two different‐type dendrimers. One is a fourth‐generation phenylazomethine dendrimer (DPAG4) and the other is a benzylether dendrimer (BzEG3) with a zinc porphyrin core. Even though the diameter of BzEG3 corresponds to that of DPAG4, BzEG3 has no metal‐complexing site. Upon dip coating on a highly oriented pyrolytic graphite substrate by the mixed solution of the metal chloride‐assembling DPAG4 molecules and BzEG3 molecules, the dendrimer monolayer was immobilized on the substrate. The concentration of the dendrimer mixture was determined in order to separate each DPAG4–metal chloride complex molecule by BzEG3. Monodispersed metaloxide nanodot arrays could be obtained from the dendrimer monolayer in which DPAG4–metal chloride complex molecule is well isolated by the BzEG3 as a spacer after the hydrolysis of metal chlorides followed by the complete removal of dendrimers. Copyright © 2013 John Wiley & Sons, Ltd.     

Surface functionalization of polymer latex particles. III. A convenient method of producing ultrafine poly(methylstyrene) latexes with aldehyde groups on the surface

A convenient method of preparing ultrafine poly(methylstyrene) (PMS) latex particles with aldehyde groups on the surface is developed. PMS latexes in the size range 33–81 nm were prepared via microemulsion polymerization, using cetyltrimethylammonium bromide (CTAB) as surfactant. The surface of the PMS latexes was oxidized in the presence of tert-butyl hydroperoxide catalyzed by copper(II) chloride. As the degree of oxidation increased up to 6 h, the amounts of aldehyde group increased. Bigger particles were found to have a slightly higher rate of oxidation than small ones under the same oxidation conditions. The particle size underwent little change during oxidation; thus, the amounts of functional groups and the particle size could be controlled concurrently. Dialysis study of the oxidized PMS microlatexes indicated that the instability of highly oxidized PMS microlatexes was caused by the reduction of total surface charge density due to the presence of carboxylic acid groups. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2103–2109, 1998     

Electrodynamic investigations of ion transport and structural properties in drug-containing gels: dielectric spectroscopy and transient current measurements on catanionic carbopol systems

The aim of this study is to show the potential of using electrodynamic methods as characterization tools in the controlled drug release process, on complex drug release systems. The two formulations under study were a Carbopol gel containing diphenhydramine and an identical gel also containing the surfactant sodium dodecyl sulfate which forms catanionic vesicles with the diphenhydramine. The average diffusion coefficients were calculated from both the dielectric spectroscopy and the transient current measurements. Comparing the herein-obtained diffusion coefficients with those obtained in another study using a traditional USP technique for the same system, the values are virtually the same. The two electrodynamic methods proved to be potentially valuable tools for obtaining information about the concentration and the motion of the drug molecules inside the gel. The transient current measurements are particularly interesting in this case, as the method gives information not only on an average level, but also of the different charged moieties separately. Interestingly, it seems that the methods also are applicable for obtaining information about the mesh size in the gel.     

Laser Microprobe Mass Analysis of Individual Antarctic Aerosol Particles

Abstract

Individual Antarctic aerosol particles in the 0.5–4 μm aerodynamic diameter range were analyzed using laser microprobe mass analysis (LAMMA). As they were sampled near the ocean, the great majority consists of seasalt, transformed to various degrees in the atmosphere. Major alterations include the association of an excess sulfate and methane sulfonate with these particles. Sulfate-rich particles containing little or no chloride were found mostly in the smallest size fraction (0.5–1 μm), where they account for some 5% of all particles: they are most likely highly transformed seasalt. Aluminosilicates, on the other hand, only appear among the coarser particles: they represent 2% of the particulates in the 2–4 μm range. The remainder of the aerosol consists of organic, Fe-rich, K-rich and Zn-rich particles. The latter groups have very low abundances: always less than 1% of the population of the impactor stage(s) onto which they were collected.     

Emulsifier-free emulsion copolymerization of styrene and sodium styrene sulfonate

The kinetics of the emulsifier-free emulsion copolymerization of styrene and sodium styrene sulfonate have been examined over a range of comonomer compositions. The rate of polymerization was found to increase dramatically in the presence of small amounts of sodium styrene sulfonate. This increase is attributed to the increased number of particles formed when sodium styrene sulfonate was present and to a gel effect enhanced by ion association. At low concentrations of functional comonomer, where a monodisperse product was obtained, a homogeneous nucleation mechanism of particle generation is proposed. At higher concentrations, broader and then bimodal size distributions were obtained, and this is ascribed to significant aqueous phase polymerization of sodium styrene sulfonate. The water-soluble homopolymer is supposed to act as a locus of polymerization. The occurrence of this aqueous phase side reaction and the generation of secondary particles makes impossible the preparation of highly sulfonated polystyrene latexes by batch or seeded batch emulsion copolymerization.     

Multigram scale synthesis and characterization of monodisperse tetragonal zirconia nanocrystals

A new and simple method has been developed to synthesize large quantities of highly monodisperse tetragonal zirconia nanocrystals. In this synthesis, a nonhydrolytic sol-gel reaction between zirconium(IV) isopropoxide and zirconium(IV) chloride at 340 degrees C generated 4 nm sized zirconia nanoparticles. A high-resolution transmission electron microscopic (HRTEM) image showed that the particles have a uniform particle size distribution and that they are highly crystalline. These monodisperse nanoparticles were synthesized without any size selection process. X-ray diffraction studies combined with Rietveld refinement revealed that the ZrO(2) nanocrystals are the high-temperature tetragonal phase, and very close to a cubic phase. When zirconium(IV) bromide is used as a precursor instead of zirconium chloride, zirconia nanoparticles with an average size of 2.9 nm were obtained. The UV-visible absorption spectrum of 4 nm sized zirconia nanoparticles exhibited a strong absorption starting at around 270 nm. A fluorescence spectrum with excitation at 300 nm showed a broad fluorescence band centered around 370 nm. FTIR spectra showed indication of TOPO binding on the ZrO(2) nanoparticle surface. These optical studies also suggest that the nanoparticles are of high quality in terms of narrow particle size distribution and relatively low density of surface trap states.