Calculation of the (liquid + liquid) equilibrium of solutions of hyperbranched polymers with the lattice-cluster theory combined with an association model

The (liquid + liquid) equilibrium of solutions of hyperbranched polyesters is calculated with the lattice-cluster theory (LCT) combined with a chemical association model. The considered solvents are n-alkanes as well as propan-1-ol and butan-1-ol. The structure of the solvents is also considered in the framework of the LCT, assuming the solvent molecules as linear chains of several segments. For polymer solutions with the non-associating n-alkanes only the self association of the hyperbranched polymer molecules has to be considered by the chemical association lattice model (CALM). For the solutions of the type alcohol + hyperbranched polymer additionally the cross association is taken into account by a modified version of the extended chemical association lattice model (ECALM). The association effects are proved to influence strongly the phase equilibrium. Calculating the cloud-point curve and the critical point the polydispersity of the polymer samples is neglected. There is a reasonable agreement of the calculated curves with the experimental data taken from the literature.     

Volumes of mixing 2,4-dimethylpyridine withn-alkanes

In continuation of our work on excess thermodynamic properties of non-electrolyte solutions containing pyridine bases withn-alkanes, we have determined excess molar volumesV ^E for 2,4-dimethylpyridine + C₆ to C₁₀ n-alkanes at 25°C. For the investigated systems noV ^E values were available in the literature for comparison with our data. The experimentalV ^E was used to test the Prigogine-Flory-Patterson theory (PFP), Extended Real Associated Solutions model (ERAS) and the Treszczanowicz-Benson method (TB).     

Low-frequency Raman spectra of odd α,ω-disubstituted n-alkanes

Low-Frequency Raman spectra of odd α,ω-dibromo- and α,ω-dihydroxy-n-alkanes were recorded. The longitudinal acoustic mode (LAM-1) frequencies were assigned by references to the published results for n-alkanes and even α,ω-disubstituted n-alkanes and also by taking account of the effects of end intermolecular forces and end-group masses by use of the chain model of Minoni and Zerbi.     

The influence of the generation number of liquid-crystalline polypropyleneimine dendrimers on the sorption of low-molecular-weight compounds

The thermodynamic characteristics of ultimately dilute solutions of n-alkanes and n-alkanols in columnar and isotropic poly(propyleneimine) dendrimer phases of three generations (G1-G3) were studied by reversed-phase gas chromatography. The influence of the structure of dendrimers and the chemical nature and the size of nonmesogen molecules on their ability to be dissolved in liquid crystalline phases is discussed. It was found that the compatibility of low-molecular-weight compounds with anisotropic phases increased as the number of dendrimer generation grew.     

Temperature dependence of the free energy of sorption ofn-alkanes and energy contribution of their methylene groups on columns with fullerene C60

The partial molar free energy, enthalpy, and entropy of sorption of C₁₁−C₂₃ n-alkanes were calculated on the basis of the GC data obtained on the glass capillary column coated with fullerene C₆₀ (Ful-60) as stationary phase. The thermodynamic parameters ofn-alkane sorption on a column with Ful-60 and a fused silica capillary column with polydimethylsiloxane OV-1 were determined and compared. The enthalpy-entropy compensation effect for the sorption ofn-alkanes on Ful-60 and OV-1 was found. A linear dependence of the partial molar free energy ofn-alkane sorption on the temperature of analysis and carbon chain length was found. The free energy contributions of the methylene groups were calculated, and their temperature dependences were studied. The differences in the temperature dependences of the energy contributions of methylene groups ofn-alkanes on Ful-60 and OV-1 were revealed. The entropy contribution is 68–82% of the enthalpy contribution which indicates a substantial role of the number of contacts with Ful-60 in retention ofn-alkanes. The ability of Ful-60 for dispersive interactions is similar to those of nonpolar liquid phases and substantially differs from that for carbon adsorbents. Fullerene columns were shown to be convenient for analysis of highly boiling organic substances in aqueous and organic solutions. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1490–1495, August, 1999.     

Measurement and Correlation of the Ionic Conductivity of Ionic Liauid-Molecular Solvent Solutions

The ionic conductivity of the solutions formed from 1-n-butyl-3-methylimidazolium tetrafluoroborate （[Bmim][BF4]） or 1-n-butyl-3-methylimidazolium hexafluorophosphate （[Bmim][PF6]） and different molecular solvents （MSs） were measured at 298.15 K. The molar conductivity of the ionic liquids （ILs） increased dramatically with increasing concentration of the MSs. It was found that the molar conductivity of the IL in the solutions studied in this work could be well correlated by the molar conductivity of the neat ILs and the dielectric constant and molar volume of the MSs.     

Application of urea adduction technique to polluted urban aerosols for the determination of hydrogen isotopic composition of n-alkanes

We examined an applicability of an improved urea adduction technique for the determination of hydrogen isotopic composition (δD) of homologous series of n-alkanes present in polluted urban aerosols using GC/TC/IRMS. Unresolved complex mixture (UCM) of hydrocarbons that interferes with accurate isotope measurements of n-alkanes was removed from n-alkane fraction by a urea adduction method. Recoveries of C₂₀ to C₃₀ n-alkanes during the urea adduction procedure were greater than 90% when the concentrations of total n-alkanes exceed 6.1?µg?mL^?1. Our compound-specific D/H ratios confirm the absence of significant hydrogen isotope fractionation in n-alkanes during urea adduction and recovery of the purified n-alkane fraction. We applied this technique to the urban aerosols that contain a large quantity of UCM to measure δD of C₂₀ to C₃₅ n-alkanes in urban aerosols from Tokyo and Sapporo with an accuracy less than 10‰. We found that the δD values widely ranged from ?38 to ?179‰. Based on the δD values of individual n-alkanes in aerosol samples, we can obtain further information on the sources of aerosol n-alkanes and their source regions, and the atmospheric processes such as long-range transport and atmospheric mixing of air masses of different origin.     

Experimental measurement and correlation of flash point of alternate PUREX/UREX solvent (36% TiAP) in C<Subscript>8</Subscript>–C<Subscript>16</Subscript> diluents

Flash point of a chemical characterizes its operating safety envelope. Tri-isoamyl phosphate (TiAP) is being proposed as an alternate to conventional nuclear solvent tri-n-butyl phosphate but flash point of TiAP containing organic solutions are not available in literature. Flash points of C₈–C₁₆ n-alkanes and 36% TiAP/C₈–C₁₆ n-alkane solutions were experimentally measured and correlated by means of empirical correlations. This paper is probably the first reported work in the literature on flash points of TiAP containing solutions.     

Coexistence of Tellurium Cations and Anions in Phosphonium-Based Ionic Liquids

Elemental tellurium readily dissolves in ionic liquids (ILs) based on tetraalkylphosphonium cations even at temperatures below 100 °C. In the case of ILs with acetate, decanoate, or dicyanamide anions, dark red to purple colored solutions form. A study combining NMR, UV-Vis and Raman spectroscopy revealed the formation of tellurium anions (Te_n)²⁻ with chain lengths up to at least n=5, which are in dynamic equilibrium with each other. Since external influences could be excluded and no evidence of an ionic liquid reaction was found, disproportionation of the tellurium is the only possible dissolution mechanism. Although the spectroscopic detection of tellurium cations in these solutions is difficult, the coexistence of tellurium cations, such as (Te₄)²⁺ and (Te₆)⁴⁺, and tellurium anions could be proven by cyclic voltammetry and electrodeposition experiments. DFT calculations indicate that electrostatic interactions with the ions of the ILs are sufficient to stabilize both types of tellurium ions in solution.     

N-Alkanes in Air Particulates of the Eastern Province of Saudi Arabia

Abstract

Oil hydrocarbons represent a great proportion of organic compounds in the atmosphere. Information about these compounds in the atmosphere of the Eastern Province of Saudi Arabia is lacking. In this study, n-alkanes and polynuclear aromatic hydrocarbons in air particulates were determined. The highest median concentration levels of n-alkanes in three urban areas and three areas near oil production centers were 121 ng/m³ and 42.9 ng/m³, respectively. Polynuclear aromatic hydrocarbons were also detected, although they are present in too low concentration for reliable quantitative measurement by GC and GC/MS techniques. A positive correlation was found between the concentration levels of n-alkanes in air particulates and the total suspended particulates measured at most locations. The carbon preference index (CPI) and the presence of the unresolved complex envelope suggested an anthropogenic origin for the n-alkanes.     

Interaction Between GMAC-m-CS and Surfactants: Surface Tension and Conductivity Methods

Glycidyl trimethyl ammonium chloride-modified chitosan (GMAC-m-CS) was synthesized through nucleophilic substitution of GMAC on CS in isopropanol dispersed system, which was characterized by FTIR and ¹H NMR methods. The interaction between GMAC-m-CS and surface active ILs ?1-dodecyl (tetradecyl and hexadecyl)-3-methylimidazolium bromide (C_nmimBr, n = 12, 14, 16) was studied by surface tension and conductivity methods. The amount of C_nmimBr adsorbed on GMAC-m-CS increases first with raising temperature, and then decreases, which reaches the largest amount at 30°C. The amount increases with the increase of alkyl chain length. The surface tension reducing capabilities of GMAC-m-CS/C_nmimBr systems increase with temperature, however, decrease with the increase of GMAC-m-CS concentration. The aggregation processes of C₁₄mimBr in solutions without GMAC-m-CS and with high concentration of GMAC-m-CS were entropy driven; however, it is enthalpy driven in solutions with low concentration of GMAC-m-CS. Based on the analysis of properties of GMAC-m-CS/C_nmimBr, the interaction model of GMAC-m-CS/ILs was proposed.     

Some thermodynamic quantities of n-alkanes as a function of chain length

Summary Results from high pressure dilatometry onn-alkanes and linear polyethylene and literature data yield a linear relation between specific volume, entropy and enthalpy of fusion, the reciprocal melting temperature and 1/n, wheren denotes the number of C-atoms per molecule. Extrapolating towards infiniten one always obtains polyethylene data.The differences in the properties ofn-alkanes and polyethylene can be ascribed to the influence of the chain ends. Assuming entropy and enthalpy contributions from these chain ends as made probable by a molecular model one can quantitatively explain then-dependence of the above mentioned quantities including their pressure dependence.With 10 figures and 2 tables     

Optimisation of solid-state urea clathrate formation as a chemical separation method coupled to compound-specific stable carbon isotope analysis

Solid-state urea clathrate formation (SSUCF) as a chemical separation method prior to stable carbon isotope fingerprinting of diesel fuel contaminations was studied. The stable carbon isotope ratios (δ¹³C) of n-alkanes in diesel fuel can be used to trace the origin of a contamination. The accurate measurement of the stable isotopic composition of individual compounds requires baseline separation from any other co-eluting compounds. For this purpose silica gel column chromatography (SGCC) and SSUCF were applied. Detailed optimisation of SSUCF was performed: different activators, clathrate formation temperatures, activator volumes, clathrate formation times and sample capacity were investigated. The main benefits of the developed method are reduced clathrate formation time and increased recoveries for lower molecular weight n-alkanes. The recoveries of the developed SSUCF method ranged between 63 and 100% for C10–C24 n-alkanes with relative standard deviation no more than 7%. The precision of the gas chromatography-isotope ratio mass spectrometry measurement was acceptable with a standard deviation of the δ¹³C values ranging between 0.08 and 0.15‰. The absence of isotopic fractionation was also investigated.

The robustness of the method was tested within a model experiment. Nine different water samples including distilled water, tap water, river water, industrial wastewaters and groundwater samples were spiked with the same diesel fuel. The water samples were extracted with n-hexane and after purification with both SGCC and SSUCF n-alkanes were measured. The δ¹³C values of n-alkanes were found to be similar for all samples. The importance of sample purification prior to compound-specific isotope analysis (CSIA) was also demonstrated within this model experiment by analysing samples from different stages of the sample preparation.

Our results show that the proposed method can remarkably improve the precision of compound-specific stable carbon isotope analysis of n-alkanes originating from diesel contamination of the aquatic environment.     

The highly crosslinked dimethacrylic/divinylbenzene copolymers

The thermal stability of the ionic liquids (ILs) 1-n-butyl-3-methylimidazolium bromide, [BMIM]Br, and 1-n-octyl-3-methylimidazolium bromide, [OMIM]Br, was evaluated through thermogravimetry (TG). Long-term isothermal TG studies revealed that both of these ILs exhibit appreciable decomposition even at temperatures significantly lower than the onset decomposition temperature, previously determined from fast scan TG experiments. The long-term TG studies of both the ILs showed linear mass loss as a function of time at each temperature of 10 °C interval in the range 533–573 K over a period of 10 h. The kinetics of isothermal decomposition of ILs was analyzed using pseudo-zero-order rate expression. The activation energies for the isothermal decomposition of [BMIM]Br and [OMIM]Br under nitrogen atmosphere are 219.86 and 212.50 kJ mol⁻¹, respectively. The moisture absorption kinetics of these ILs at 25 °C and 30% relative humidity (RH) and at 85 °C and 85% RH were also studied. Water uptake of ILs exposed at 25 °C/30%RH follows a simple saturation behavior in agreement with Weibull model while that at 85 °C/85%RH fortuitously fit into the Henderson–Pabis model.     

Selective Separation of Oxy-PAH from n-Alkanes and PAH in Complex Organic Mixtures Extracted from Airborne PM2.5

A fast and simple fractionation method was optimized to selectively separate oxy-PAH from polycyclic aromatic hydrocarbons (PAH) and n-alkanes contained in solvent extracted organic matter (SEOM) from atmospheric particles with an aerodynamic diameter ≤2.5 μm (PM_2.5). Samples were collected in Mexico City. Multivariate parameters were adjusted on a standard mixture, and on SEOM spiked with pure standard mixture solutions: type and amount of phase; packing densities; type, proportion and amount of solvents, and elution flow rates were tested under several elution schemes. Cyanopropylsilyl-bonded phase material was the selected stationary phase. The separation method was applied to real samples of SEOM (2.6, 5.6 and 8.5 mg) spiked with n-alkanes, PAH and oxy-PAH. n-Alkanes overlapped with PAH due to an excess of n-alkanes in real samples overloading the capacity of the stationary phase. Oxy-PAH was separated totally from n-alkanes and PAH. Mean recoveries ± confidence intervals (95%) for n-alkanes ranged from 53 ± 17% (n-tetracontane) to 101 ± 11% (n-hexacosane); for PAH from 58 ± 5% (phenanthrene) to 85 ± 9% (benzo[k]fluoranthene); and for oxy-PAH from 68 ± 12% (9,10-dihydrobenzo[a]pyren-7(8H)one) to 108 ± 9% (1,2-benzopyrone). This method is an efficient fractionation procedure to be applied to oxy-PAH, PAH and n-alkanes in complex organic mixtures extracted from PM_2.5.     

Determination of n-Alkanes in Jet Fuel by Cold-electron Ionization Gas Chromatography–Mass Spectrometry

A rapid, easy, and reliable method was developed for the characterization of jet fuel with minimal sample preparation. A standard solution of 13 aliphatic n-alkanes in hexane was used to evaluate and validate the separation using cold-electron ionization gas chromatography–mass spectrometry. The method was evaluated and validated by the linearity, accuracy, and precision for all analytes. The limits of detection and quantification for each n-alkane were also evaluated. Nine major n-alkanes from n-octane to n-hexadecane were positively identified and quantified in jet fuel due to the enhanced molecular ion in the mass spectra. Major n-alkanes and their corresponding isomers in jet fuel were also identified from the extracted ion chromatograms. n-Undecane, n-dodecane, n-tridecane, and n-tetradecane were present at the highest concentrations in jet fuel at approximately 7% (v/v). The total concentrations of total straight chain alkanes were 34–37% in jet fuel that was comparable with the standard value of 32%.     

Predicting Excess Enthalpies of Ether and/or Hydrocarbon Binary Mixtures

Previous applications of the Flory–Patterson theory in the analysis of the excess molar enthalpies at 25°C for some binary mixtures composed of ethers, n-alkanes, br-alknes, and cycloalkanes are reviewed. The possibility of correlating the Flory interaction parameters X _ij in terms of the acentric factors of the components is examined. For selected ether (1) + n-alkane(2) mixtures, a set of linear relations between X ₁₂ and the acentric factors of the n-alkanes are reported.Visiting Professor on sabbatical leave from the     

On the Dynamic Interaction of n‐Butane with Imidazolium‐Based Ionic Liquids

The impact of a reactant from the gas phase on the surface of a liquid and its transfer through this gas/liquid interface are crucial for various concepts applying ionic liquids (ILs) in catalysis. We investigated the first step of the adsorption dynamics of n‐butane on a series of 1‐alkyl‐3‐methylimidazolium bis(trifluoromethanesulfonyl)imide ILs ([C_nC₁Im][Tf₂N]; n=1, 2, 3, 8). Using a supersonic molecular beam in ultra‐high vacuum, the trapping of n‐butane on the frozen ILs was determined as a function of surface temperature, between 90 and 125 K. On the C₈‐ and C₃‐ILs, n‐butane adsorbs at 90 K with an initial trapping probability of ≈0.89. The adsorption energy increases with increasing length of the IL alkyl chain, whereas the ionic headgroups seem to interact only weakly with n‐butane. The absence of adsorption on the C₁‐ and C₂‐ILs is attributed to a too short residence time on the IL surface to form nuclei for condensation even at 90 K.     

The flexibility of rodlike micelles in aqueous solutions and the crossover concentrations among dilute,semidilute, and concentrated regimes

A flexibility parameter, the persistence length, has been evaluated from the radii of gyration and the contour lengths for rodlike micelles of heptaoxyethylene alkyl ethers (C _n E₇,n=12, 14, 16) and tetradecyldimethylammonium chloride (C₁₄DAC) and bromide (C₁₄DAB) at the observed crossover concentrations between dilute and semidilute regimes. The persistence length range is 43–73 nm, except for C₁₂E₇, for which it is 32 nm. The crossover concentrations between dilute and semidilute regimes for the semiflexible rodlike micelles calculated according to Ying and Chu as a function of the molecular weight, the contour length, and the persistence length are consistent with the observed values. The crossover concentration between semidilute and concentrated regimes was, on the other hand, calculated by using the same micelle parameters, including the value of thickness of cross-section of the rodlike micelles. The obtained values are at variance with the observed values. This means that rodlike micelles in semidilute and concentrated solutions might differ in size and/or flexibility from those in dilute solution.     

Ethylene glycol‐based ionic liquids via azide/alkyne click chemistry

A facile synthetic route for the preparation of dicationic ethylene glycol based‐ionic liquids (ILs) via the azide/alkyne “click” reaction is presented. The copper(I) catalyzed, microwave‐assisted azide/alkyne “click” reaction between diazido‐ethylene glycols and the corresponding alkyne containing IL‐head group enables a simple preparation of different sets of poly(ethylene glycol)‐based ILs. Beside tetra‐ and hexa(ethylene glycol)‐based ILs, also oligomeric (M_n = 400 g/mol) and polymeric ILs (M_n up to 1550 g/mol) could be prepared in good yield and with full conversion of the ionic head group. The prepared ILs were extensively characterized via NMR spectroscopy and ESI‐time‐of‐flight (TOF) mass spectroscopy, revealing the formation of multiply charged ions in the negative mode. Thermal stability proved to be exceptionally high (up to 300 °C) together with low glass‐transition temperatures. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013