Supramolecular Fullerene Chemistry: A Comprehensive Study of Cyclophane‐Type Mono‐ and Bis‐Crown Ether Conjugates of C70

The covalently templated bis‐functionalization of C₇₀, employing bis‐malonate 5 tethered by an anti‐disubstituted dibenzo[18]crown‐6 (DB18C6) ether, proceeds with complete regiospecificity and provides two diastereoisomeric pairs of enantiomeric C₇₀ crown ether conjugates, (±)‐ 7a and (±)‐ 7b , featuring a five o'clock bis‐addition pattern that is disfavored in sequential transformations (Scheme 1). The identity of (±)‐ 7a was revealed by X‐ray crystal‐structure analysis (Fig. 6). With bis‐malonate 6 containing a syn‐disubstituted DB18C6 tether, the regioselectivity of the macrocylization via double Bingel cyclopropanation changed completely, affording two constitutionally isomeric C₇₀ crown ether conjugates in a ca. 1 : 1 ratio featuring the twelve ( 16 ) and two o'clock ((±)‐ 15 ) addition patterns, respectively (Scheme 3). The X‐ray crystal‐structure analysis of the twelve o'clock bis‐adduct 16 revealed that a H₂O molecule was included in the crown ether cavity (Figs. 7 and 8). Two sequential Bingel macrocyclizations, first with anti‐DB18C6‐tethered ( 5 ) and subsequently with syn‐DB18C6‐tethered ( 6 ) bis‐malonates, provided access to the first fullerene bis‐crown ether conjugates. The two diastereoisomeric pairs of enantiomers (±)‐ 28a and (±)‐ 28b were formed in high yield and with complete regioselectivity (Scheme 9). The cation‐binding properties of all C₇₀ crown‐ether conjugates were determined with the help of ion‐selective electrodes (ISEs). Mono‐crown ether conjugates form stable 1 : 1 complexes with alkali‐metal ions, whereas the tetrakis‐adducts of C₇₀, featuring two covalently attached crown ethers, form stable 1 : 1 and 1 : 2 host‐guest complexes (Table 2). Comparative studies showed that the conformation of the DB18C6 ionophore imposed by the macrocyclic bridging to the fullerene is not particularly favorable for strong association. Reference compound (±)‐ 22 (Scheme 4), in which the DB18C6 moiety is attached to the C₇₀ sphere by a single bridge only and, therefore, possesses higher conformational flexibility, binds K⁺ and Na⁺ ions better by factors of 2 and 20, respectively. Electrochemical studies demonstrate that cation complexation at the crown ether site causes significant anodic shifts of the first reduction potential of the appended fullerene (Table 3). In case of the C₇₀ mono‐crown ether conjugates featuring a five o'clock functionalization pattern, addition of 1 equiv. of KPF₆ caused an anodic shift of the first reduction wave in the cyclic voltammogram (CV) by 70 to 80 mV, which is the result of the electrostatic effect of the K⁺ ion bound closely to the fullerene core (Fig. 14). Addition of 2 equiv. of K⁺ ions to C₇₀ bis‐crown ether conjugates resulted in the observation of only one redox couple, whose potential is anodically shifted by 170 mV with respect to the corresponding wave in the absence of the salt (Fig. 16). The synthesis and characterization of novel tris‐ and tetrakis‐adducts of C₇₀ are reported (Schemes 5 and 6). Attempts to prepare even more highly functionalized derivatives resulted in the formation of novel pentakis‐ and hexakis‐adducts and a single heptakis‐adduct (Scheme 7), which were characterized by ¹H‐ and ¹³C‐NMR spectroscopy (Fig. 10), as well as matrix‐assisted laser‐desorption‐ionization mass spectrometry (MALDI‐TOF‐MS). Based on predictions from density‐functional‐theory (DFT) calculations (Figs. 12 and 13), structures are proposed for the tris‐, tetrakis‐, and pentakis‐adducts.     

Regioselective One‐Step Synthesis and Topological Chirality of trans‐3, trans‐3,trans‐3 and e,e,e [60]Fullerene‐Cyclotriveratrylene Tris‐adducts: Discussion on a Topological meso‐Form

The C₃‐symmetrical [60]fullerene‐cyclotriveratrylene (CTV) tris‐adducts (±)‐ 1 (with a trans‐3,trans‐3,trans‐3 addition pattern) and (±)‐ 2 (with an e,e,e addition pattern) were prepared in 11 and 9% yield, respectively, by the regio‐ and diastereoselective tether‐directed Bingel reaction of C₆₀ with the tris‐malonate‐appended CTV derivative (±)‐ 3 (Scheme). This is the first example for tris‐adduct formation by a one‐step tether‐directed Bingel addition. Interchromophoric interactions between the electron‐rich CTV cap and the electron‐attracting fullerene moiety have a profound effect on the electrochemical behavior of the C‐sphere (Fig. 4 and Table 1). The fullerene‐centered first reduction potentials in compounds (±)‐ 1 and (±)‐ 2 are by 100 mV more negative than those of their corresponding tris[bis(ethoxycarbonyl)methano][60]fullerene analogs that lack the CTV cap. A particular interest in (±)‐ 1 and (±)‐ 2 arises from the topological chirality of these molecules. A complete topology study is presented, leading to the conclusion that the four possible classical stereoisomers of the e,e,e regioisomer are topologically different, and, therefore, there exist four different topological stereoisomers (Fig. 6). Interestingly, in the case of the trans‐3,trans‐3,trans‐3 tris‐adduct, there are four classical stereoisomers but only two topological stereoisomers (Fig. 7). An example of a target molecule representing a topological meso‐form is also presented (Fig. 8).     

A pair of diastereomeric 1:2 salts of (R)‐ and (S)‐2‐methylpiperazine with (2S,3S)‐tartaric acid

The crystal structures of a pair of diastereomeric 1:2 salts of (R)‐ and (S)‐2‐methylpiperazine with (2S,3S)‐tartaric acid, namely (R)‐2‐methylpiperazinediium bis[hydrogen (2S,3S)‐tartrate] monohydrate, (I), and (S)‐2‐methylpiperazinediium bis[hydrogen (2S,3S)‐tartrate] monohydrate, (II), both C₅H₁₄N₂²⁺·2C₄H₅O₆⁻·H₂O, each reveal the formation of well‐defined head‐to‐tail‐connected hydrogen tartrate chains; these chains are linked into a two‐dimensional sheet via intermolecular hydrogen bonds involving hydroxy groups and water molecules, resulting in a layer structure. The (R)‐2‐methylpiperazinediium ions lie between the hydrogen tartrate layers in the most stable equatorial conformation in (I), whereas in (II), these ions are in an unstable axial position inside the more interconnected layers and form a larger number of intermolecular hydrogen bonds than are observed in (I).     

The absolute configuration of (2S,4S)‐ and (2R,4R)‐2‐tert‐butyl‐4‐methyl‐3‐(4‐tolyl­sulfon­yl)‐1,3‐oxazolidine‐4‐carbaldehyde

The title enanti­omorphic compounds, C₁₆H₂₃NO₄S, have been obtained in an enanti­omerically pure form by crystallization from a diastereomeric mixture either of (2S,4S)‐ and (2R,4S)‐ or of (2R,4R)‐ and (2S,4R)‐2‐tert‐butyl‐4‐methyl‐3‐(4‐tolyl­sulfon­yl)‐1,3‐oxazolidine‐4‐carbaldehyde. These mixtures were prepared by an aziridination rearrangement process starting with (S)‐ or (R)‐2‐tert‐butyl‐5‐methyl‐4H‐1,3‐dioxine. The crystal structures indicate an envelope conformation of the oxazolidine moiety for both compounds.     

(1R,2R)‐1,2‐Di­phenyl‐1,2‐bis(8‐quinoline­sulfonyl­amino)ethyl­enedi­amine–acetone (1/1)

The crystal structure of the new chiral complex (1R,2R)‐1,2‐di­phenyl‐1,2‐bis(8‐quinoline­sulfonyl­amino)‐ ethyl­enedi­amine–acetone (1/1), C₃₂H₂₆N₄O₄S₂^.C₃H₆O, is reported. The conformation of the C₃₂H₂₆N₄O₄S₂ (BQSDA) mol­ecule is determined by a bifurcated N—H?N hydrogen‐bond system. The acetone of solvation is linked to the BQSDA mol­ecule by an N—H?O hydrogen bond.     

Synthesen und Eigenschaften von Bis(perfluoralkyl)zink‐Verbindungen

Syntheses and Properties of Bis(perfluoroalkyl)zinc Compounds The conditions for the syntheses of bis(perfluoroalkyl)zinc compounds Zn(R_f)₂ · 2 D (R_f = C₂F₅, n‐C₃F₇, i‐C₃F₇, n‐C₄F₉, n‐C₆F₁₃, n‐C₇F₁₅, and n‐C₈F₁₇; D = CH₃CN, tetrahydrofurane, dimethylsulfoxide) are described. Mass spectra, thermal decompositions, ¹⁹F‐ and ¹³C‐NMR spectra are discussed.     

Oligo‐ and poly(fullerene)s for photovoltaic applications: Modeled electronic behaviors and synthesis

The atom transfer radical addition polymerization (ATRAP) of fullerene to give poly(fullerene)s (PFs) for organic electronics is explored. Quantum chemistry maps the expected electronic behavior of PFs with respect to common electron acceptors, namely fullerene, phenyl‐C₆₁‐butyric acid methyl ester and its bis‐adduct, and mono‐ and bis‐indine‐fullerene derivatives. Surprisingly, it is found that PFs should demonstrate electron affinities and LUMO energy levels closer to the bis‐derivatives than the mono‐adducts, even though only one C₆₀ double‐bond is used in PF chain formation. A self‐consistent library of PFs is synthesized and a correlation between structural characteristics and molecular weights is found. While comonomers with –OC₁₆H₃₃ linear side‐chains lead to the highest known ATRAP molecular weights of 21000 g mol ^{? 1}, like‐for‐like, branched side‐chains permit syntheses of higher molecular weights and more soluble polymers. Of the series, however, PFs with ‐OC₁₂ side‐chains are expected to be of the greatest interest for opto‐electronic applications due to their ease of handling and highest regioregularity. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1345–1355     

Bis(2,4,7‐tri­methyl­indenyl)­cobalt(II) and rac‐2,2′,4,4′,7,7′‐hexamethyl‐1,1′‐biindene

The crystal and molecular structures of bis(η⁵‐2,4,7‐tri­methyl­indenyl)­cobalt(II), [Co(C₁₂H₁₃)₂], (I), and rac‐2,2′,4,4′,7,7′‐hexamethyl‐1,1′‐biindene, C₂₄H₂₆, (II), are reported. In the crystal structure of (I), the Co atom lies on an inversion centre and the structure represents the first example of a bis(indenyl)cobalt complex exhibiting an eclipsed indenyl conformation. The (1R,1′R) and (1S,1′S) enantiomers of the three possible stereoisomers of (II), which form as by‐products in the synthesis of (I), cocrystallize in the monoclinic space group P2₁/c. In the unit cell of (II), alternating (1R,1′R) and (1S,1′S) enantiomers pack in non‐bonded rows along the a axis, with the planes of the indenyl groups parallel to each other and separated by 3.62 and 3.69 Å.     

Hexakis‐Adducts of [60]Fullerene with Different Addition Patterns: Templated Synthesis,Physical Properties,and Chemical Reactivity

Representatives of two classes of hexakis‐adducts of C₆₀ were prepared by templated synthesis strategies. Compound 8 with a dipyridylmethano addend in a pseudo‐octahedral addition pattern was obtained by DMA‐templated addition (DMA=9,10‐dimethylanthracene; Scheme 1) and served as the starting material for the first supramolecular fullerene dimer 2 . Hexakis‐adduct 12 also possesses a pseudo‐octahedral addition pattern and was obtained by a sequence of tether‐directed remote functionalization, tether removal, and regioselective bis‐functionalization (Scheme 2). With its two diethynylmethano addends in trans‐1 position, it is a precursor for fascinating new oligomers and polymers that feature C₆₀ moieties as part of the polymeric backbone (Fig. 1). With the residual fullerene π‐electron chromophore reduced to a `cubic cyclophane'‐type sub‐structure (Fig. 4), and for steric reasons, 8 and 12 no longer display electrophilic reactivity. As a representative of the second class of hexakis‐adducts, (±)‐ 1 , which features six addends in a distinct helical array along an equatorial belt, was prepared by a route that involved two sequential tether‐directed remote functionalization steps (Schemes 3 and 5). In compound (±)‐ 1 , π‐electron conjugation between the two unsubstituted poles of the carbon sphere is maintained via two (E)‐stilbene‐like bridges (Fig. 4). As a result, (±)‐ 1 features very different chemical reactivity and physical properties when compared to hexakis‐adducts with a pseudo‐octahedral addition pattern. Its reduction under cyclic voltammetric conditions is greatly facilitated (by 570 mV), and it readily undergoes additional, electronically favored Bingel additions at the two sterically well‐accessible central polar 6‐6 bonds under formation of heptakis‐ and octakis‐adducts, (±)‐ 30 and (±)‐ 31 , respectively (Scheme 6). The different extent of the residual π‐electron delocalization in the fullerene sphere is also reflected in the optical properties of the two types of hexakis‐adducts. Whereas 8 and 12 are bright‐yellow (end‐absorption around 450 nm), compound (±)‐ 1 is shiny‐red, with an end‐absorption around 600 nm. This study once more demonstrates the power of templated functionalization strategies in fullerene chemistry, providing addition patterns that are not accessible by stepwise synthetic approaches.     

Light‐Controlled Regioselective Synthesis of Fullerene Bis‐Adducts

Multi‐functionalization and isomer‐purity of fullerenes are crucial tasks for the development of their chemistry in various fields. In both current main approaches—tether‐directed covalent functionalization and supramolecular masks—the control of regioselectivity requires multi‐step synthetic procedures to prepare the desired tether or mask. Herein, we describe light‐responsive tethers, containing an azobenzene photoswitch and two malonate groups, in the double cyclopropanation of [60]fullerene. The formation of the bis‐adducts and their spectroscopic and photochemical properties, as well as the effect of azobenzene photoswitching on the regiochemistry of the bis‐addition, have been studied. The behavior of the tethers depends on the geometry of the connection between the photoactive core and the malonate moieties. One tether lead to a strikingly different adduct distribution for the E and Z isomers, indicating that the covalent bis‐functionalization of C₆₀ can be controlled by light.     

Enantioselective Synthesis of β‐Amino Acids,Part 13

Inexpensive acryloyl chloride was converted in 91% overall yield to two derivatives of β‐alanine, (R,R,R)‐ 6 and (R,R,S)‐ 6 , containing two chiral auxiliaries. C‐Alkylation of (R,R,R)‐ and (R,R,S)‐ 6 via a dianion derivative, was performed by direct metallation with 2.2 equiv. of lithium hexamethyldisilazane (LHMDS) in THF at ?78°. C‐Alkylation of (R,R,S)‐ 6 ‐Li₂ (‘matched' pair of chiral auxiliaries) afforded the mono‐alkylated products 8 – 11 in 29–96% yield and 54–95% stereoselectivity. Employment of LiCl as an additive generally increased stereoselectivities, whereas the effect of HMPA as a cosolvent was erratic. Chemical correlation of the major diastereoisomer from the alkylation reactions with (S)‐α‐alkyl‐β‐alanine ( 12 – 15 ) showed that addition of the electrophile preferentially takes place on the enolate's Si‐face. This conclusion is also supported by molecular‐modeling studies (ab initio HF/3‐21G), which indicate that the lowest‐energy conformation for (R,R,S)‐ 6 ‐Li₂ presents the more sterically hindered Re‐face of the enolate. The theoretical studies also predict a determining role for N? Li? O chelation in (R,R,S)‐ 6 ‐Li₂, giving rise to an interesting ‘ion‐triplet' configuration for the dilithium dianion.     

Synthesis of Amphiphilic Fullerene Derivatives and Their Incorporation in Langmuir and Langmuir‐Blodgett Films

Various amphiphilic fullerene derivatives were prepared by functionalization of [5,6]fullerene‐C₆₀‐I_h (C₆₀) with malonate or bis‐malonate derivatives obtained by esterification of the malonic acid mono‐esters 5 – 7 . Cyclopropafullerene 10 was obtained by protection of the carboxylic acid function of 6 as a tert‐butyl ester, followed by Bingel addition to C₆₀ and a deprotection step (Scheme 2). The preparation of 10 was also attempted directly from the malonic acid mono‐ester 6 under Bingel conditions. Surprisingly, the corresponding 3′‐iodo‐3′H‐cyclopropa[1,9][5,6]fullerene‐C₆₀‐I_h‐3′‐carboxylate 11 was formed instead of 10 (Scheme 3). The general character of this new reaction was confirmed by the preparation of 15 and 16 from the malonic acid mono‐esters 13 and 14 , respectively (Scheme 4). All the other amphiphilic fullerene derivatives were prepared by taking advantage of the versatile regioselective reaction developed by Diederich and co‐workers which led to macrocyclic bis‐adducts of C₆₀ by a cyclization reaction at the C‐sphere with bis‐malonate derivatives in a double Bingel cyclopropanation. The bis‐adducts 37 – 39 with a carboxylic acid polar head group and four pendant long alkyl chains of different length were prepared from diol 22 and acids 5 – 7 , respectively (Scheme 9). In addition, the amphiphilic fullerene derivatives 45, 46, 49, 54 , and 55 bearing different polar head groups and compound 19 with no polar head group were synthesized (Schemes 11–13, 15, and 5, resp.). The ability of all these compounds to form Langmuir monolayers at the air‐water interface was investigated in a systematic study. The films at the water surface were characterized by their surface pressure vs. molecular area isotherms, compression and expansion cycles, and Brewster‐angle microscopy. The spreading behavior of compound 10 was not good, the two long alkyl chains in 10 being insufficient to prevent aggregation resulting from the strong fullerene‐fullerene interactions. While no films could be obtained from compound 19 with no polar head group, all the corresponding amphiphilic fullerene bis‐adducts showed good spreading characteristics and reversible behavior upon successive compression/expansion cycles. The encapsulation of the fullerene in a cyclic addend surrounded by four long alkyl chains is, therefore, an efficient strategy to prevent the irreversible aggregation resulting from strong fullerene‐fullerene interactions usually observed for amphiphilic C₆₀ derivatives at the air‐water interface. The balance of hydrophobicity to hydrophilicity was modulated by changing the length of the surrounding alkyl chains or the nature of the polar head group. The best results in terms of film formation and stability were obtained with the compounds having the largest polar head group, i.e. 45 and 46 , and dodecyl chains. Finally, the Langmuir films obtained from the amphiphilic fullerene bis‐adducts were transferred onto solid substrates, yielding high‐quality Langmuir‐Blodgett films.     

Poly[[μ2‐1,3‐bis(pyridin‐4‐yl)propane](μ3‐1,4‐phenylenediacetato)cadmium]

Solvothermal reaction between Cd(NO₃)₂, 1,4‐phenylenediacetate (1,4‐PDA) and 1,3‐bis(pyridin‐4‐yl)propane (bpp) afforded the title complex, [Cd(C₁₀H₈O₄)(C₁₃H₁₄N₂)]_n. Adjacent carboxylate‐bridged Cd^II ions are related by an inversion centre. The 1,4‐PDA ligands adopt a cis conformation and connect the Cd^II ions to form a one‐dimensional chain extending along the c axis. These chains are in turn linked into a two‐dimensional network through bpp bridges. The bpp ligands adopt an anti–gauche conformation. From a topological point of view, each bpp ligand and each pair of 1,4‐PDA ligands can be considered as linkers, while the dinuclear Cd^II unit can be regarded as a 6‐connecting node. Thus, the structure can be simplified to a two‐dimensional 6‐connected network.     

Preparation of C2‐Symmetric Bis[2‐(diphenylphosphino)ferrocen‐1‐yl]‐ methane and Its Use in Rhodium‐ and Ruthenium‐Catalyzed Hydrogenation

The two diphosphine ligands (R_p,R_p)‐ and (S_p,S_p)‐bis[2‐(diphenylphospino)ferrocenyl]methane, (R_p,R_p)‐ and (S_p,S_p)‐ 1 , resp., were prepared in six steps from (S)‐ and (R)‐ferrocenyl tolyl sulfoxide, respectively (Scheme). In the solid state, both the diborane complex (R_p,R_p)‐ 1 ? (BH₃)₂ and the palladium dichloride complex [PdCl₂((R_p,R_p)‐ 1 )] were found to adopt C₂‐pseudosymmetric structures according to X‐ray analyses (Figs. 2 and 3). In the Rh‐ and Ru‐catalyzed hydrogenation of selected alkenes and ketones in the presence of the new ligands, enantioselectivities of up to 55% ee were obtained.     

1,1′‐[(Ethane‐1,2‐diyldioxy)di‐o‐phenylene]bis(indoline‐2,3‐dione) (L) and a novel [Ag2L2]2+ metallocycle based on coordination‐driven Ag—O and Ag—π bonds

1,1′‐[(Ethane‐1,2‐diyldioxy)di‐o‐phenylene]bis(indoline‐2,3‐dione), C₃₂H₂₄N₂O₆, L or (I), adopts a trans conformation with the two terminal indoline‐2,3‐dione groups located on opposite sides of the central ether bridge, as required by a centre of inversion located at the mid‐point of the ethane C—C bond. However, in the discrete binuclear Ag^I metallocycle complex salt bis{μ‐1,1′‐[(ethane‐1,2‐diyldioxy)di‐o‐phenylene]bis(indoline‐2,3‐dione)}disilver(I) bis(hexafluoridoantimonate), [Ag₂(C₃₂H₂₄N₂O₆)₂][SbF₆]₂, (II), synthesized by combination of L with AgSbF₆, L adopts a gauche conformation to bind Ag^Ivia the two indolinedione O atoms and two C atoms from the phenoxy ring. One dione O atom from the opposite side of the ether bridge completes the irregular coordination environment of each Ag^I atom. The complex is on a centre of inversion located between the Ag^I atoms. In the solid state, these binuclear [Ag₂L₂]²⁺ metallocycles stack together via intermolecular π–π interactions to generate a one‐dimensional chain motif, with the [SbF₆]⁻ counter‐ions, which are disordered, located between the chains.     

Metabolism of Deuterated Isomeric 6,7‐Dihydroxydodecanoic Acids in Saccharomyces cerevisiae – Diastereo‐ and Enantioselective Formation and Characterization of 5‐Hydroxydecano‐4‐lactone (=4,5‐Dihydro‐5‐(1‐hydroxyhexyl)furan‐2(3H)‐one) Isomers

The chemical synthesis of deuterated isomeric 6,7‐dihydroxydodecanoic acid methyl esters 1 and the subsequent metabolism of esters 1 and the corresponding acids 1a in liquid cultures of the yeast Saccharomyces cerevisiae was investigated. Incubation experiments with (6R,7R)‐ or (6S,7S)‐6,7‐dihydroxy(6,7‐²H₂)dodecanoic acid methyl ester ((6R,7R)‐ or (6S,7S)‐(6,7‐²H₂)‐ 1 , resp.) and (±)‐threo‐ or (±)‐erythro‐6,7‐dihydroxy(6,7‐²H₂)dodecanoic acid ((±)‐threo‐ or (±)‐erythro‐(6,7‐²H₂)‐ 1a , resp.) elucidated their metabolic pathway in yeast (Tables 1–3). The main products were isomeric ²H‐labeled 5‐hydroxydecano‐4‐lactones 2 . The absolute configuration of the four isomeric lactones 2 was assigned by chemical synthesis via Sharpless asymmetric dihydroxylation and chiral gas chromatography (Lipodex ^® E). The enantiomers of threo‐ 2 were separated without derivatization on Lipodex ^® E; in contrast, the enantiomers of erythro‐ 2 could be separated only after transformation to their 5‐O‐(trifluoroacetyl) derivatives. Biotransformation of the methyl ester (6R,7R)‐(6,7‐²H₂)‐ 1 led to (4R,5R)‐ and (4S,5R)‐(2,5‐²H₂)‐ 2 (ratio ca. 4 : 1; Table 2). Estimation of the label content and position of (4S,5R)‐(2,5‐²H₂)‐ 2 showed 95% label at C(5), 68% label at C(2), and no ²H at C(4) (Table 2). Therefore, oxidation and subsequent reduction with inversion at C(4) of 4,5‐dihydroxydecanoic acid and transfer of ²H from C(4) to C(2) is postulated. The 5‐hydroxydecano‐4‐lactones 2 are of biochemical importance: during the fermentation of Streptomyces griseus, (4S,5R)‐ 2 , known as L‐factor, occurs temporarily before the antibiotic production, and (?)‐muricatacin (=(4R,5R)‐5‐hydroxy‐heptadecano‐4‐lactone), a homologue of (4R,5R)‐ 2 , is an anticancer agent.     

Synthesis of (P)‐ and (M)‐6,7‐Bis[(diphenylphosphanyl)methyl]‐8,12‐diphenylbenzo[a]heptalenes – Potential Ligands for Homogeneous Asymmetric Catalysis

The title bis(phosphane) ligands have been prepared starting from optically pure diisopropyl (P)‐ and (M)‐8,12‐diphenylbenzo[a]heptalene‐6,7‐dicarboxylates ((P)‐ 1b and (M)‐ 1b ) that had been obtained by HPLC separation of rac‐ 1b on a semi‐preparative Chiralcel OD column. Reduction of (P)‐ 1b and (M)‐ 1b with diisobutylaluminum hydride (DIBAH) gave optically pure (P)‐ and (M)‐dimethanols 3 (Scheme 6 and Fig. 5). Unfortunately, the almost quantitative chlorination of rac‐ 3 with PCl₅ in CHCl₃ at −60° led with (M)‐ 3 to nearly complete loss of optical integrity. However, mesylate formation of (P)‐ 3 , followed by phosphanylation with LiP(BH₃)Ph₂ gave (P)‐ 6 with only a small loss of optical activity. Optically pure (P)‐ 6 was obtained by crystallization from Et₂O/hexane, which removed the nearly insoluble rac‐ 6 . The pure bis(phosphane) ligands (P)‐ 2 and (M)‐ 2 can be liberated quantitatively from 6 by warming 6 in toluene in the presence of 1,4‐diazabicyclo[2.2.2]octane (DABCO). First Rh^I‐catalyzed asymmetric hydrogenation reactions of (Z)‐α‐(acetamido)cinnamic acid ((Z)‐ 14 ) in the presence of (P)‐ 2 led to (R)‐N‐acetylphenylalanin ((R)‐ 15 ) in optical purities up to 77% (see Table 1).     

Metabolism of Deuterated threo‐Dihydroxy Fatty Acids in Saccharomyces cerevisiae: Enantioselective Formation and Characterization of Hydroxylactones and γ‐Lactones

Biotransformation of (±)‐threo‐7,8‐dihydroxy(7,8‐²H₂)tetradecanoic acids (threo‐(7,8‐²H₂)‐ 3 ) in Saccharomyces cerevisiae afforded 5,6‐dihydroxy(5,6‐²H₂)dodecanoic acids (threo‐(5,6‐²H₂)‐ 4 ), which were converted to (5S,6S)‐6‐hydroxy(5,6‐²H₂)dodecano‐5‐lactone ((5S,6S)‐(5,6‐²H₂)‐ 7 ) with 80% e.e. and (5S,6S)‐5‐hydroxy(5,6‐²H₂)dodecano‐6‐lactone ((5S,6S)‐5,6‐²H₂)‐ 8 ). Further β‐oxidation of threo‐(5,6‐²H₂)‐ 4 yielded 3,4‐dihydroxy(3,4‐²H₂)decanoic acids (threo‐(3,4‐²H₂)‐ 5 ), which were converted to (3R,4R)‐3‐hydroxy(3,4‐²H₂)decano‐4‐lactone ((3R,4R)‐ 9 ) with 44% e.e. and converted to ²H‐labeled decano‐4‐lactones ((4R)‐(3‐²H₁)‐ and (4R)‐(2,3‐²H₂)‐ 6 ) with 96% e.e. These results were confirmed by experiments in which (±)‐threo‐3,4‐dihydroxy(3,4‐²H₂)decanoic acids (threo‐(3,4‐²H₂)‐ 5 ) were incubated with yeast. From incubations of methyl (5S,6S)‐ and (5R,6R)‐5,6‐dihydroxy(5,6‐²H₂)dodecanoates ((5S,6S)‐ and (5R,6R)‐(5,6‐²H₂)‐ 4a ), the (5S,6S)‐enantiomer was identified as the precursor of (4R)‐(3‐²H₁)‐ and (2,3‐²H₂)‐ 6 ). Therefore, (4R)‐ 6 is synthesized from (3S,4S)‐ 5 by an oxidation/keto acid reduction pathway involving hydrogen transfer from C(4) to C(2). In an analogous experiment, methyl (9S,10S)‐9,10‐dihydroxyoctadecanoate ((9S,10S)‐ 10a ) was metabolized to (3S,4S)‐3,4‐dihydroxydodecanoic acid ((3S,4S)‐ 15 ) and converted to (4R)‐dodecano‐4‐lactone ((4R)‐ 18 ).     

The Control of the Stereochemistry in the Palladium‐Catalyzed Alternating Styrene/Carbon Monoxide Copolymerization: Effect of the Chirality of the Ligand and of the Ligand‐to‐Palladium Ratio,Preliminary Communication

Diaquapalladium(2+) trifluoromethanesulfonates modified with (4R,4′S)‐ or (4S,4′S)‐2,2′‐bis(4‐benzyl‐4,5‐dihydrooxazole) (C_s‐ and C₂‐ligands) produce isotactic poly(1‐oxo‐2‐phenylpropane‐1,3‐diyl) through copolymerization of styrene with carbon monoxide. However, the same meso‐catalyst in the presence of the free ligand leads to prevailingly syndiotactic growth of the copolymer, whereas the optically active catalyst, when used in the presence of the free enantiomeric ligand, gives an atactic copolymer.     

Conformations of the Nine‐Membered Ring in the B‐Nor‐5,10‐secosteroids. X‐Ray and NMR Analysis

The conformations of (Z)‐ and (E)‐5‐oxo‐B‐nor‐5,10‐secocholest‐1(10)‐en‐3β‐yl acetates ( 2 and 3 , resp.) were examined by a combination of X‐ray crystallographic analysis and NMR spectroscopy, with emphasis on the geometry of the cyclononenone moiety. The ¹H‐ and ¹³C‐NMR spectra showed that the unsaturated nine‐membered ring of (E)‐isomer 3 in C₆D₆ and (D₆)acetone solution exists in a sole conformation of type B ₁ , which is similar to its solid‐state conformation. The (Z)‐isomer 2 in C₆D₆, CDCl₃, and (D₆)acetone solution, however, exists in two conformational forms of different families, with different orientation of the carbonyl group, the predominant form (85%) corresponding to the conformation of type A ₁ and the minor (15%) to the conformation A ₂ present also in the crystalline state. In this solid‐state conformations of the nine‐membered ring of both compounds, the 19‐Me and 5‐oxo groups are ‘β’‐oriented. The NMR analysis suggests that the nine‐membered ring of 4 has a conformation of type C ₁ in CDCl₃ solution.