Development of a switchable multidimensional/comprehensive two-dimensional gas chromatographic analytical system

In this study, a new system for analysis using a dual comprehensive two-dimensional gas chromatography/targeted multidimensional gas chromatography (switchable GC × GC/targeted MDGC) analysis was developed. The configuration of this system not only permits the independent operation of GC, GC × GC and targeted MDGC analyses in separate analyses, but also allows the mode to be switched from GC × GC to targeted MDGC any number of times through a single analysis. By incorporating a Deans switch microfluidics transfer module prior to a cryotrapping device, the flow stream from the first dimension column can be directed to either one of two second dimension columns in a classical heart-cutting operation. Both second columns pass through the cryotrap to allow solute bands to be focused and then rapidly remobilized to the respective second columns. A short second column enables GC × GC operation, whilst a longer column is used for targeted MDGC. Validation of the system was performed using a standard mixture of compounds relevant to essential oil analysis, and then using compounds present at different abundances in lavender essential oil. Reproducibility of retention times and peak area responses demonstrated that there was negligible variation in the system over the course of multiple heart-cuts, and proved the reliable operation of the system. An application of the system to lavender oil, as a more complex sample, was carried out to affirm system feasibility, and demonstrate the ability of the system to target multiple components in the oil. The system was proposed to be useful for study of aroma-impact compounds where GC × GC can be incorporated with MDGC to permit precise identification of aroma-active compounds, where heart-cut multidimensional GC-olfactometry detection (MDGC-O) is a more appropriate technology for odour assessment.     

Application of Comprehensive Two‐Dimensional Gas Chromatography (GC×GC) to the Qualitative Analysis of Essential Oils

This paper investigates the separation of moderately complex samples by comprehensive two‐dimensional gas chromatography (GC×GC). The analysis of peppermint (Mentha piperita) and spearmint (Mentha spicata) essential oil components, including acetates, alcohols, furans, ketones, sesquiterpenes, and terpenes, was achieved by one‐dimensional gas chromatography with quadrupole mass spectrometry detection (GC/MSD) and GC×GC with flame ionization detection. Peppermint essential oil was found to contain 89 identifiable peaks by GC×GC compared to 30 peaks in the GC/MSD chromatogram. Likewise, 68 peaks were found in the GC×GC chromatogram of spearmint (compared to 28 in GC/MSD). Plots of the first dimension versus second dimension retention times provided a fingerprint of the two essential oils, which revealed 52 similar compounds between the two essential oils as opposed to 18 matches by 1D GC.     

Irresolvable complex mixture of hydrocarbons in soybean oil deodorizer distillate

Aliphatic hydrocarbons (HCs) can be used as a fingerprint of a given seed oil. Only by characterization of aliphatic HCs could contamination by mineral oil in that seed oil be confirmed. During the isolation of squalene from soybean oil deodorizer distillate, a significant amount of unknown HCs, ca. 44 wt%, was obtained. These seemingly‐easy‐to‐identify HCs turned out to be much more difficult to elucidate due to the presence of an irresolvable complex mixture (ICM). The objective of this study was to purify and identify the unknown ICM of aliphatic HCs from soybean oil deodorizer distillate. Purification of the ICM was successfully achieved by using modified Soxhlet extraction, followed by modified preparative column chromatography, and finally by classical preparative column chromatography. FT‐IR, TLC, elemental analysis, GC/FID, NMR and GC‐MS analyses were then performed on the purified HCs. The GC chromatogram detected the presence of ICM peaks comprising two major peaks and a number of minor peaks. Validation methods such as IR and NMR justified that the unknowns are saturated HCs. This work succeeded in tentatively identifying the two major peaks in the ICM as cycloalkane derivatives.     

Enantioselective comprehensive two‐dimensional gas chromatography of lavender essential oil

The enantiomeric composition of several chiral markers in lavender essential oil was studied by flow modulated comprehensive two‐dimensional gas chromatography operated in the reverse flow mode and hyphenated to flame ionization and quadrupole mass spectrometric detection. Two capillary column series were used in this study, 2,3‐di‐O‐ethyl‐6‐O‐tert‐butyldimethylsilyl‐β‐cyclodextrin or 2,3,6‐tri‐O‐methyl‐β‐cyclodextrin, as the chiral column in the first dimension and α polyethylene glycol column in the second dimension. Combining the chromatographic data obtained on these column series, the enantiomeric and excess ratios for α‐pinene, β‐pinene, camphor, lavandulol, borneol, and terpinen‐4‐ol were determined. This maybe a possible route to assess the authenticity of lavender essential oil.     

Retention time locking procedure for comprehensive two-dimensional gas chromatography

In gas chromatography (GC) reproducible retention times are in many cases highly favorable or in some cases even required. In one-dimensional GC, retention time shifts can be eliminated or minimized using a procedure called retention time locking (RTL). This procedure is based on adjusting the (constant) column head pressure. Unfortunately, this RTL procedure cannot be used in comprehensive two-dimensional gas chromatography (GC × GC) given the fact that peaks will shift in both dimensions. Adjusting the column head pressure in GC × GC will only minimize or eliminate the primary retention time shifts. In this paper, a fast and easy to perform, two-step retention time locking procedure for two-dimensional gas chromatography (2D-RTL) is proposed and its feasibility is demonstrated. This 2D-RTL procedure involves adjustment of the column head pressure or constant column flow, followed by the adjustment of the so-called effective secondary column length. The secondary column length is increased or decreased, simply by moving it stepwise through the modulator. It is demonstrated that retention time shifts in both the primary- and secondary-dimension, which may occur after e.g. replacing the column set, can be minimized to less than half peak base width. The proposed 2D-RTL procedure is used successfully for approximately 1 year in our laboratory.     

Phenomenon of dual‐ and single‐retention behaviors of solutes and its validation by computational simulation in linear programmed temperature gas chromatography

The current theory of programmed temperature gas chromatography considers that solutes are focused by the stationary phase at the column head completely and does not explicitly recognize the different effects of initial temperature (T_o) and heating rate (r_T) on the retention time or temperature of a homologue series. In the present study, n‐alkanes, 1‐alkenes, 1‐alkyl alcohols, alkyl benzenes, and fatty acid methyl esters standards were used as model chemicals and were separated on two nonpolar columns, one moderately polar column and one polar column. Effects of T_o and r_T on the retention of nonstationary phase focusing solutes can be explicitly described with isothermal and cubic equation models, respectively. When the solutes were in the stationary phase focusing status, the single‐retention behavior of solutes was observed. It is simple, dependent upon r_T only and can be well described by the cubic equation model that was visualized through four sequential slope analyses. These observed dual‐ and single‐retention behaviors of solutes were validated by various experimental data, physical properties, and computational simulation.     

Projection of multidimensional GC data into alternative dimensions—exploiting sample dimensionality and structured retention patterns

Comprehensive multidimensional gas chromatography (GC×GC) is a powerful separation technique. One of the features of this technique is that it offers separations with more apparent structure than that offered by conventional one-dimensional GC (1-D GC). While some previous studies have alluded to this structure, and used structured retention patterns for some simple classifications, the topic of structured retention in GC×GC has not been studied in any great detail. Using the separation of fatty acid methyl esters (FAME) on both nonpolar/polar and polar/nonpolar column sets, the interaction between the separation dimensions and the sample dimensions is explored here. The GC×GC separation of a series of compounds is presented as a projection of the sample from sample space, a p-dimensional space with dimensions defined by the dimensionality of the sample, into separation space: for GC×GC, a two-dimensional plane passing through the sample space in an orientation defined by the separation conditions. Using this conceptual model and some a priori knowledge of the sample, it is shown how the image of the sample in the separation space can be used to construct an image of the sample in alternate dimensions, such as second dimension retention factor (²k) vs. chain length in the case of FAME. These projections into alternate dimensions should facilitate the interpretation of the complex patterns found within the GC×GC chromatogram for the identification and classification of compounds.     

Integrated multidimensional and comprehensive 2D GC analysis of fatty acid methyl esters

Fatty acid methyl ester (FAME) profiling in complex fish oil and milk fat samples was studied using integrated comprehensive 2D GC (GC × GC) and multidimensional GC (MDGC). Using GC × GC, FAME compounds – cis‐ and trans‐isomers, and essential fatty acid isomers – ranging from C18 to C22 in fish oil and C18 in milk fat were clearly displayed in contour plot format according to structural properties and patterns, further identified based on authentic standards. Incompletely resolved regions were subjected to MDGC, with Cn (n = 18, 20) zones transferred to a ²D column. Elution behavior of C18 FAME on various ²D column phases (ionic liquids IL111, IL100, IL76, and modified PEG) was evaluated. Individual isolated Cn zones demonstrated about four‐fold increased peak capacities. The IL100 provided superior separation, good peak shape, and utilization of elution space. For milk fat‐derived FAME, the ²D chromatogram revealed at least three peaks corresponding to C18:1, more than six peaks for cis/trans‐C18:2 isomers, and two peaks for C18:3. More than 17 peaks were obtained for the C20 region of fish oil‐derived FAMEs using MDGC, compared with ten peaks using GC × GC. The MDGC strategy is useful for improved FAME isomer separation and confirmation.     

Off‐line comprehensive two‐dimensional reversed‐phase countercurrent chromatography with high‐performance liquid chromatography: Orthogonality in separation of Polygonum cuspidatum Sieb. et Zucc

Off‐line comprehensive two‐dimensional reversed‐phase countercurrent chromatography with high‐performance liquid chromatography was investigated in separation of crude ethanol extract from traditional Chinese medicinal herb Polygonum cuspidatum Sieb. et Zucc. Two‐dimensional contour plots for countercurrent chromatography with high‐performance liquid chromatography was obtained after comprehensive separation was completed. Total peak capacity was evaluated and approximately 810 peaks were obtained through a comprehensive two‐dimensional separation. A highly orthogonality of 52.23% and a large separation space occupancy of 88.86% were achieved. Meanwhile, it was found that several components could be well separated by countercurrent chromatography while they could not be separated by high‐performance liquid chromatography, and vice versa, which further indicated the orthogonality of the two separation methods. The off‐line comprehensive two‐dimensional countercurrent chromatography with high‐performance liquid chromatography provided a promising and powerful method for separation of complex natural products.     

Compositional studies of high-temperature coal tar by GC/FTIR analysis of light oil fractions

Summary A method for determination of the composition of the light oil fractions in high-temperature coal tar by means of distillation, followed by gas chromatography on a crosslinked fused-silica, capillary column coated with optimum amount of stationary phase and identification by capillary gas chromatography/Fourier transform infrared spectrometry combined with GC retention indices (GC/FTIR-RI) is described. This method was effectively used to identify complex mixture such as coal tar without any standard samples, especially, adapted for isomeric compounds. More than 60 and 50 compounds were also separated and identified respectively in light oil fractions. This shows the capability of the capillary GC/FTIR combined with GC retention indices to identify isomers not accomplished by GC/MS.     

Comparison of Thermal Sweeper and Cryogenic Modulator Technology for Comprehensive Gas Chromatography

The two current technologies for achieving comprehensive gas chromatography (GC×GC) – the thermal sweeper and the cryogenic modulator – are compared in an interlaboratory study using a multicomponent semi‐volatile aromatic compound sample. The same column set (phases, film thickness, dimensions of columns) and conditions of oven temperature program were used. Carrier gas flow settings however were different for the data reported here. The thermal sweeper has a longer overall length due to the extra ca. 30 cm length of narrow bore tubing used for the modulator/accumulator section. Data reveal that the two methods behave in an analogous manner in respect of delivering GC×GC results, with key peak parameters of peak widths and symmetry measures showing good correlation. Retention time dissimilarity on the first dimension columns in the two systems arises from different flow rates used, however the second column retention is similar, and this is due to the resulting different elution temperatures that peaks elute on the first dimension in each system. Overall, the two approaches to GC×GC appear to produce equivalent results within the scope of the application studied. Each system does have its experimental limitations; the thermal sweeper has what may be called a ‘thick film effect’, where at high temperature it can be difficult to sufficiently trap the migrating bands in the accumulator column, and the pulsing of solutes in the cryogenic system may suffer from a ‘thick wall effect’ if a column with too thick a wall dimension is used at low oven temperature.     

Separation of phenol‐containing pyrolysis products using comprehensive two‐dimensional chromatography with columns based on pyridinium ionic liquids

We describe the application of columns with highly polar stationary liquid phases based on pyridinium ionic liquids for the two‐dimensional chromatography separation of bio‐oil and product of coal pyrolysis. By using inverse combination columns—a first ionic liquid column and a second nonpolar column—good separation results have been obtained. In the analysis of coal pyrolysis products, the suggested approach provides a much better resolution between components in comparison with a less polar first‐dimension column (based on polyethylene glycol). A good selectivity for the peaks of phenols is observed, and the group of phenols is well detached and separated from the group of diaromatics. A good separation picture was obtained also for bio‐oil, the groups of phenols and guaiacol derivatives are distinguished with good resolution of substances within each group.     

Fast Multi‐residue Screening for 84 Pesticides in Tea by Gas Chromatography with Dual‐tower Auto‐sampler,Dual‐column and Dual Detectors

A fast multi‐residue screening method for determining pesticides in tea is described. Pesticides are extracted from tea with acetone and methylene chloride, then enriched and cleaned up with solid phase extraction (SPE) prior to gas chromatographic determination. The fast screening is achieved by a gas chromatograph system equipped with dual‐column, dual‐tower auto‐sampler and both electron capture detector (ECD) and flame photometric detector (FPD). Optimal conditions are investigated for the prospective pesticides including column selection, detection mode, the retention behaviors, quantitative calibration, as well as the recoveries and repeatability of pesticides from tea samples. Under the optimal conditions, with the FPD‐P detector accompanied CP‐SIL 13CB column, 48 pesticides can be separated well and detected within 38 min; and with a DB‐5 column, 35 ECD‐detectable pesticides can be separated and detected within 46 min. The recoveries of 84 pesticides in tea samples are 65–120% with 0.34–16% RSD for spiking 0.02–3.0 mg/kg standard species. Because of the thermal instability of most pesticides, direct cold extraction of pesticides from a tea sample is recommended. The proposed method provided a very fast and efficient procedure to screen 84 pesticides from a complicated tea sample matrix.     

Cellulose Derivatives Used as Chiral Stationary Phases in Capillary Gas Chromatography

Abstract

In this work, we present the first separation of enantiomers in gas chromatography (GC) using a fused‐silica capillary column containing cellulose triacetate, cellulose triphenylcarbamate, or cellulose tris(3,5‐dimethylphenylcarbamate) as the new chiral stationary phase. The separated solutes included alcohols, amine, ketone, ether, ester, and amino acid. Their column efficiency, polarity, and chiral selectivity were studied. The retention mechanism was discussed. The results showed that those derivatives had relatively high chiral recognition abilities and can be used as the chiral stationary phases in GC.     

Development and validation of a multiresidue method for determination of 37 pesticides in soil using GC-NPD

In this study, a multiresidue analytical method for the detection of 37 pesticides in a soil matrix was developed and validated. The soil sample was fortified with a known quantity of pesticides at two different concentration levels (0.1 and 0.01 µg/g) and the analytes were extracted via a liquid–solid extraction method. The pesticides were separated on an HP5 capillary column and were analyzed with a gas chromatograph coupled to a nitrogen–phosphorous detector (GC‐NPD). Method validation was accomplished with good linearity (r² = 0.994–0.999) within a considerable range of concentrations. Satisfactory recoveries (70.5–110.4%) were obtained with 32 pesticides at both spiking concentration levels, whereas five pesticides—dimepiperate, buprofezin, prometryn, pirimicarb, and fludioxonil—were recovered at relatively low levels (43.6–61.8%). The applicability of the method was demonstrated by analyzing field samples collected from 24 different sites around Yeongsan and Sumjin rivers in the Republic of Korea. No residues of the selected pesticides were detected in any of the samples. The developed method could be employed as a simple and cost‐effective method for the routine detection and analysis of 37 pesticides in soil samples. Copyright © 2010 John Wiley & Sons, Ltd.     

Proper Tuning of Comprehensive Two‐Dimensional Gas Chromatography (GC×GC) to Optimize the Separation of Complex Oil Fractions

Comprehensive two‐dimensional gas chromatography (GC×GC) is an utterly suitable separation technique for the analysis of complex samples, such as oil fractions. Once the two columns and the operating conditions are properly tuned, the technique is able to provide a detailed characterization of such materials. Some considerations applying to the tuning of a GC×GC system for a specific separation are presented and discussed. The authors present a number of different column sets and conditions which allow the separation of a non‐aromatic hydrocarbon solvent, a kerosene, the light end of a crude oil, and an olefinic fraction, respectively. The highly structured GC×GC chromatograms, together with chemical knowledge about the samples, provide a much more comprehensive characterization of the samples than hitherto possible.     

Identification of compounds in gasoline range mixtures using combined group-type and capillary GC separations

Summary A procedure is described to improve the identification of the hydrocarbon isomers separated on a single capillary column. Group-type PNA separation was combined with capillary GC analysis. Different paraffin and naphthene groups separated by carbon number on the 13X column of a PNA-analyzer were heart-cut and analysed off-line by capillary GC. Capillary GC chromatograms of the trapped groups compared to that of the original sample helped to identify the peaks (at least by group-type), to clear up mixed peaks and to find out the ratio of the compounds co-eluting in that particular peak. Results were used to create identification tables for different types of naphthas. Presented at Balaton Symposium on High Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

气相色谱-质谱联用分析茶树油的成分

采用常规水蒸气蒸馏法从茶树枝叶中提取茶树油，经气相色谱-质谱联用分析，分离出47种成分，检索NI蚋8质谱数据库，与标准谱图对照鉴定了其中32种成分。应用Hewlett—Packard软件，按峰面积归一化法定量，所鉴定成分的馏出峰面积占总馏出峰面积的96．08％。     

Comprehensive two‐dimensional monolithic liquid chromatography of polar compounds

Two‐dimensional liquid chromatography largely increases the number of separated compounds in a single run, theoretically up to the product of the peaks separated in each dimension on the columns with different selectivities. On‐line coupling of a reversed‐phase column with an aqueous normal‐phase (hydrophilic interaction liquid chromatography) column yields orthogonal systems with high peak capacities. Fast on‐line two‐dimensional liquid chromatography needs a capillary or micro‐bore column providing low‐volume effluent fractions transferred to a short efficient second‐dimension column for separation at a high mobile phase flow rate. We prepared polymethacrylate zwitterionic monolithic micro‐columns in fused silica capillaries with structurally different dimethacrylate cross‐linkers. The columns provide dual retention mechanism (hydrophilic interaction and reversed‐phase). Setting the mobile phase composition allows adjusting the separation selectivity for various polar substance classes. Coupling on‐line an organic polymer monolithic capillary column in the first dimension with a short silica‐based monolithic column in the second dimension provides two‐dimensional liquid chromatography systems with high peak capacities. The silica monolithic C₁₈ columns provide higher separation efficiency than the particle‐packed columns at the flow rates as high as 5 mL/min used in the second dimension. Decreasing the diameter of the silica monolithic columns allows using a higher flow rate at the maximum operation pressure and lower fraction volumes transferred from the first, hydrophilic interaction dimension, into the second, reversed‐phase mode, avoiding the mobile phase compatibility issues, improving the resolution, increasing the peak capacity, and the peak production rate.