Preparation and Characterization of New C2‐ and C1‐Symmetric Nitrogen,Oxygen, Phosphorous,and Sulfur Derivatives and Analogs of TADDOL. Part III

A brief overview is presented of the field of organocatalysis using chiral H‐bond donors, chiral Brønsted acids, and chiral counter‐anions (Fig. 1). The role of TADDOLs (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanols) as H‐bond donors and the importance of an intramolecular H‐bond for acidity enhancement are discussed. Crystal structures of TADDOLs and of their N‐, S‐, and P‐analogs (Figs. 2 and 3) point the way to proposals of mechanistic models for the action of TADDOLs as organocatalysts (Scheme 1). Simple experimental two‐step procedures for the preparation of the hitherto strongest known TADDOL‐derived acids, the bicyclic phosphoric acids ( 2 in Scheme 2) and of a phosphoric‐trifluorosulfonic imide ( 9 in Scheme 4), are disclosed. The mechanism of sulfinamide formation in reactions of TADDAMIN with trifluoro‐sulfonylating reagents is discussed (Scheme 3). pK_a Measurements of TADDOLs and analogs in DMSO (reported in the literature; Fig. 5) and in MeO(CH₂)₂OH/H₂O (described herein; Fig. 6) provide information about further possible applications of this type of compounds as strong chiral Brønsted acids in organocatalysis.     

Catalytic Asymmetric Chlorination of β‐Keto Esters with Hypervalent Iodine Compounds

(Dichloroiodo)toluene (=dichloro(4‐methylphenyl)iodine; 2 ) was found to be a suitable chlorinating agent in the catalytic asymmetric chlorination of β‐keto esters 3 catalyzed by the [Ti(TADDOLato)] complex 1 (=bis(acetonitrile)dichloro[(4R,5R)‐2,2‐dimethyl‐α,α,α′,α′‐tetra(naphthalen‐1‐yl)‐1,3‐dioxolane‐4,5‐dimethanolato(2?)‐κO,κO′]titanium), whereby α‐chlorinated products were obtained in moderate to good yields and enantioselectivities of up to 71% (Scheme 2, Table 2). The enantioselectivity of the reaction shows a remarkable temperature dependence, the maximum selectivity being obtained at ca. 50°.     

Synthesis and Antibacterial Activity of Novel (4‐Fluorophenyl)(4‐(naphthalen‐2‐yl)‐6‐aryl‐2‐thioxo‐2,3‐dihydropyrimidin‐1(6H)‐yl)methanone Derivatives

A novel series of (4‐fluorophenyl)(4‐(naphthalen‐2‐yl)‐6‐aryl‐2‐thioxo‐2,3‐dihydropyrimidin‐1(6H)‐yl)methanone derivatives were synthesized from reaction of 6‐(naphthalen‐2‐yl)‐4‐aryl‐3,4‐dihydropyrimidine‐2(1H)‐thiones with 4‐fluorobenzoylchloride in dichloromethane in the presence of triethylamine. The synthesized compounds were screened for antibacterial activity against Gram positive bacteria, namely, Staphylococcus aureus ATCC25923 and Listeria monocytogenes MTCC657, and Gram negative bacteria, namely, Escherichia coli ATCC25922 and Klebsiella pneumoniae ATCC700603, respectively. Some of the tested compounds showed significant antimicrobial activity.     

Preparation of TADOOH,a Hydroperoxide from TADDOL,and Use in Highly Enantioface‐ and Enantiomer‐Differentiating Oxidations

Replacement of one OH group in TADDOL (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol) by an OOH group gives a stable, crystalline chiral hydroperoxy alcohol TADOOH (={(4R,5R)‐5‐[(hydroperoxydiphenyl)methyl]‐2,2‐dimethyl‐1,3‐dioxolan‐4‐yl}diphenylmethanol) 3 , the crystal structure of which resembles those of numerous other TADDOL derivatives (Fig. 2). The new hydroperoxide was tested as chiral oxidant in three types of reactions: the epoxidation of enones with base catalysis (Scheme 2), the sulfoxidation of methyl phenyl sulfide (Scheme 3), and the Baeyer‐Villiger oxidation of bicyclic and tricyclic cyclobutanones, rac‐ 10a – d with kinetic resolution (Scheme 4, Fig. 3, and Table). Products of up to 99% enantiomer puritiy were isolated (the highest values yet observed for oxidations with a chiral hydroperoxide!). Mechanistic models are proposed for the stereochemical courses of the three types of reactions (Schemes 5 and 6, and Fig. 4). Results of AM1 calculations of the relative transition‐state energies for the anionic rearrangements of the exo Criegee adducts of TADOOH to the enantiomeric bicyclo[3.2.0]heptan‐6‐ones are in qualitative agreement with the observed relative rates (Table and Fig. 5).     

Three closely related 1‐(naphthalen‐2‐yl)prop‐2‐en‐1‐ones: pseudosymmetry,disorder and supramoleular assembly mediated by C—H…π and C—Br…π interactions

It has been observed that when electron‐rich naphthyl rings are present in chalcones they can participate in π–π stacking interactions, and this can play an important role in orientating inhibitors within the active sites of enzymes, while chalcones containing heterocyclic substituents additionally exhibit fungistatic and fungicidal properties. With these considerations in mind, three new chalcones containing 2‐naphthyl substituents were prepared. 3‐(4‐Fluorophenyl)‐1‐(naphthalen‐2‐yl)prop‐2‐en‐1‐one, C₁₉H₁₃FO, (I), crystallizes with Z ′ = 2 in the space group P and the four molecules in the unit cell adopt an arrangement which resembles that in the space group P 2₁/a . Although 3‐(4‐bromophenyl)‐1‐(naphthalen‐2‐yl)prop‐2‐en‐1‐one, C₁₉H₁₃BrO, (II), with Z ′ = 1, is not isostructural with (I), the molecules of (I) and (II) adopt very similar conformations. In 1‐(naphthalen‐2‐yl)‐3‐(thiophen‐2‐yl)prop‐2‐en‐1‐one, C₁₇H₁₂OS, (III), the thiophene unit is disordered over two sets of atomic sites, with occupancies of 0.780 (3) and 0.220 (3), which are related by a near 180° rotation of the thiophene unit about its exocyclic C—C bond. The molecules of compound (I) are linked by three independent C—H…π(arene) hydrogen bonds to form centrosymmetric octamolecular aggregates, whereas the molecules of compound (II) are linked into molecular ladders by a combination of C—H…π(arene) and C—Br…π(arene) interactions, and those of compound (III) are linked into centrosymmetric dimers by C—H…π(thiophene) interactions.     

An Efficient Synthesis of 3‐(1H‐Tetrazol‐5‐yl)coumarins (=3‐(1H‐Tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) via Domino Knoevenagel Condensation,Pinner Reaction,and 1,3‐Dipolar Cycloaddition in Water

A novel straightforward synthesis of 3‐(1H‐tetrazol‐5‐yl)coumarins (=3‐(1H‐tetrazol‐5‐yl)‐2H‐1‐benzopyran‐2‐ones) 6 via domino Knoevenagel condensation, Pinner reaction, and 1,3‐dipolar cycloaddition of substituted salicylaldehydes (=2‐hydroxybenzaldehydes), malononitrile (propanedinitrile), and sodium azide in H₂O is reported (Scheme 1 and Table 2). This general protocol provides a wide variety of 3‐(1H‐tetrazol‐5‐yl)coumarins in good yields under mild reaction conditions.     

A Simple Multistep Conversion of 1,2‐Dihydro‐1,1‐dimethoxynaphthalen‐2‐ones to (3,4‐Dihydro‐3,4‐dioxonaphthalen‐2‐yl)acetates

On irradiation (λ=350 nm) in the presence of 1,1‐dimethoxyethene, naphthalene‐1,2‐dionemonoacetals 1 regioselectively afford 1,1,4,4‐tetramethoxycyclobuta[a]naphthalen‐3‐ones 3 . Sequential deprotection of these bis‐acetals first lead to 1,1‐dimethoxycyclobuta[a]naphthalene‐3,4‐diones 4 and then to cyclobuta[a]naphthalene‐1,3,4‐triones 6 , which, in turn, are converted into (3,4‐dihydro‐3,4‐dioxonaphthalen‐2‐yl)acetates 7 by treatment with SiO₂/MeOH/air.     

Perchloric Acid–Silica (HClO4⋅SiO2)‐Catalyzed Synthesis of 14‐Alkyl‐ or 14‐Aryl‐14H‐dibenzo[a,j]xanthenes and N‐[(2‐Hydroxynaphthalen‐1‐yl)methyl]amides

The synthesis of 14‐aryl‐ or 14‐alkyl‐14H‐dibenzo[a,j]xanthenes 3 involving the treatment of naphthalen‐2‐ol ( 1 ) with arenecarboxaldehydes or alkanals 2 in the presence of HClO₄?SiO₂ as a heterogeneous catalyst was achieved (Table 1), and this reaction was extended to the preparation of N‐[(2‐hydroxynaphthalen‐1‐yl)methyl]amides 5 by a three‐component reaction with urea ( 4a ) or an amide 4b – d as a third reactant (Table 2).     

A Convenient Synthesis of 2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridin‐4‐ones by the Reaction of the Corresponding 1‐(Chloropyridinyl)alk‐2‐en‐1‐ones with NaSH

2,3‐Dihydro‐4H‐thiopyrano[2,3‐b]pyridin‐4‐ones 4 were prepared by a three‐step sequence from commercially available 2‐chloropyridine ( 1 ). Thus, successive treatment of 1 with ⁱPr₂NLi (LDA) and α,β‐unsaturated aldehydes gave 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ols 2 , which were oxidized with MnO₂ to 1‐(2‐chloropyridin‐3‐yl)alk‐2‐en‐1‐ones 3 . The reactions of 3 with NaSH?n H₂O proceeded smoothly at 0° in DMF to provide the desired thiopyranopyridinones. Similarly, 2,3‐dihydro‐4H‐thiopyrano[2,3‐c]pyridin‐4‐ones 8 and 2,3‐dihydro‐4H‐thiopyrano[3,2‐c]pyridin‐4‐ones 12 were obtained starting from 3‐chloropyridine ( 5 ) and 4‐chloropyridine ( 9 ), respectively.     

Preparation and Characterization of New C2‐ and C1‐Symmetric Nitrogen,Oxygen, Phosphorous,and Sulfur Derivatives and Analogs of TADDOL. Part II

TADDOL (=α,α,α′,α′‐Tetraaryl‐1,3‐dioxolane‐4,5‐dimethanol) and the corresponding dichloride are converted to TADDAMINs (=(4S,5S)‐2,2,N,N′‐tetramethyl‐α,α,α′,α′‐tetraphenyl‐1,3‐dioxolan‐4,5‐dimethanamines) (Scheme 2) and ureas, 12 – 15 , and to TADDOP derivatives with seven‐membered O? P? O ester rings (Schemes 3 and 4). Cl/P‐Replacement via the Michaelis? Arbuzov reaction (Scheme 7) on mono‐ and dichlorides, derived from TADDOL, are described. It was not possible to obtain phosphines with the P‐atom attached to the benzhydrylic C‐atom of the TADDOL skeleton (Schemes 6 and 7). The X‐ray crystal structures (Figs. 1 and 2) of ten of the more than 30 new TADDOL derivatives are discussed. Full experimental details are presented.     

Preparation and Characterization of New C2‐ and C1‐Symmetric Nitrogen,Oxygen, Phosphorous,and Sulfur Derivatives and Analogs of TADDOL. Part I

The chloro alcohols 4 – 6 derived from TADDOLs (=α,α,α′,α′‐tetraaryl‐1,3‐dioxolan‐4,5‐dimethanols) are used to prepare corresponding sulfanyl alcohols, ethers, and amines (Scheme 1 and Table 1). The dithiol analog of TADDOL and derivatives thereof, 45 – 49 , were also synthesized. The crystal structures of 16 representatives of this series of compounds are reported (Figs. 1–3 and Scheme 2). The thiols were employed in Cu‐catalyzed enantioselective conjugate additions of Grignard reagents to cyclic enones, with cycloheptenone giving the best results (er up to 94 : 6). The enantioselectivity reverses from Si‐addition with the sulfanyl alcohol to Re‐addition with the alkoxy or dimethylamino thiols (Table 4). Cu^I‐Thiolates, 50 – 53 , could be isolated in up to 84% yield (Scheme 2) and were shown to have tetranuclear structures in the gas phase (by ESI‐MS), in solution (CH₂Cl₂, THF; by vapor‐pressure osmometry and by NMR pulsed‐gradient diffusion measurements; Table 5), and in the solid state (X‐ray crystal structures in Scheme 2). The Cu complex 50 of the sulfanyl alcohol is stable in air and in the presence of weak aqueous acid, and it is a highly active catalyst (0.5 mol‐%) for the 1,4‐additions, leading to the same enantio‐ and regioselectivities observed with the in situ generated catalyst (6.5 mol‐%; Scheme 3). Since the reaction mixtures contain additional metal salts (MgX₂, LiX) it is not possible at this stage, to propose a mechanistic model for the conjugate additions.     

Synthesis of (1α)‐1,25‐Dihydroxyvitamin D3 with a β‐Positioned Seven‐Carbon Side Chain at C(12)

A convergent synthesis of an analogue of (1α)‐1,25‐dihydroxyvitamin D₃ ( 1b ) with a C₇ side chain at C(12), i.e., of 5 (Fig.), is described. A key step of the synthesis is the assembly of the triene system by a Pd^II‐catalyzed ring closure of an enol triflate (‘bottom’ fragment) followed by coupling of the resulting Pd^II intermediate with an alkenylboronate (‘upper’ fragment) (Scheme 2). The synthetic strategy allows isotopic labelling at the end of the synthesis.     

Photochemical Transformations of Some 2‐(5‐Methylthiophen‐2‐yl)‐3‐[(naphthalen‐2‐yl)methoxy]‐4H‐chromen‐4‐ones Involving Type‐II Process

Photo‐irradiation of 2‐(5‐methylthiophen‐2‐yl)‐3‐[(naphthalen‐2‐yl)methoxy]‐4H‐chromen‐4‐ones yielded the fascinating angular tetracyclic products via cyclization involving both 2‐thienyl ring and naphthylmethoxy group via 1,4‐biradical generated in the Norrish type‐II process. The stereochemical dispositions of the products were determined by MM2 energy minimized programme and spectroscopic analysis.     

Reductive Elimination of Phenylsulfonyl Groups in the 3‐Position of Benzo[a]heptalene‐2,4‐diols

3‐(Phenylsulfonyl)benzo[a]heptalene‐2,4‐diols 1 can be desulfonylated with an excess of LiAlH₄/MeLi?LiBr in boiling THF in good yields (Scheme 6). When the reaction is run with LiAlH₄/MeLi, mainly the 3,3′‐disulfides 6 of the corresponding 2,4‐dihydroxybenzo[a]heptalene‐3‐thiols are formed after workup (Scheme 7). However, the best yields of desulfonylated products are obtained when the 2,4‐dimethoxy‐substituted benzo[a]heptalenes 2 are reduced with an excess of LiAlH₄/TiCl₄ at ?78→20° in THF (Scheme 10). Attempts to substitute the PhSO₂ group of 2 with freshly prepared MeONa in boiling THF led to a highly selective ether cleavage of the 4‐MeO group, rather than to desulfonylation (Scheme 13).     

Three‐Step Synthesis of 3‐Aryl‐2‐sulfanylthieno[2,3‐b]‐, ‐[2,3‐c]‐, or ‐[3,2‐c]pyridines from the Corresponding Aryl(halopyridinyl)methanones

A convenient three‐step procedure for the synthesis of three types of 3‐aryl‐2‐sulfanylthienopyridines 4, 8 , and 12 has been developed. The first step of the synthesis of thieno[2,3‐b]pyridine derivatives 4 is the replacement of the halo with a (sulfanylmethyl)sulfanyl group in aryl(2‐halopyridin‐3‐yl)methanones 1 by successive treatment with Na₂S?9 H₂O and chloromethyl sulfides to give aryl{2‐[(sulfanylmethyl)sulfanyl]pyridin‐3‐yl}methanones 2 . In the second step, these were treated with LDA (LiNⁱPr₂) to give 3‐aryl‐2,3‐dihydro‐2‐sulfanylthieno[2,3‐b]pyridin‐3‐ols 3 , which were dehydrated in the last step with SOCl₂ in the presence of pyridine to give the desired products. Similarly, thieno[2,3‐c]pyridine and thieno[3,2‐c]pyridine derivatives, 8 and 12 , respectively, can be prepared from aryl(3‐chloropyridin‐4‐yl)methanones 5 and aryl(4‐chloropyridin‐3‐yl)methanones 9 , respectively.     

Novel Intramolecular Cyclization of 2‐(Buta‐1,3‐dienyl)benzyl Anions to 6,7(9)‐Dihydro‐5H‐benzocycloheptenyl Anions Leading to Successive Formation of 1,2‐Dihydrocyclopropa[a]naphthalenes

When treated with LiNⁱPr₂ (LDA) at ?78°, 1‐[(methylsulfanyl)methyl]‐2‐[(1Z,3E)‐4‐phenylbuta‐1,3‐dien‐1‐yl]benzene easily cyclized to form benzocycloheptenyl anion, which successively underwent intramolecular nucleophilic substitution to give a cyclopropanaphthalene. Similar LDA‐mediated cyclization also occurred for 4‐phenyl‐ or 4‐methyl‐substituted 1‐[2‐(methoxymethyl)phenyl]buta‐1,3‐dienes to furnish the corresponding benzocycloheptenes and cyclopropanaphthalenes. A 4‐tert‐butyl analog also underwent LDA‐mediated cyclization to give a benzocycloheptene, but not a cyclopropanaphthalene.     

Synthesis and Characterization of New 7‐Substituted 6,14‐Ethenomorphinane Derivatives: N‐{5‐[(5α,7α)‐4,5‐Epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐yl]‐1,3,4‐oxadiazol‐2‐yl}arenamines

In this study, (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylic acid hydrazide ( 5 ) was synthesized by the condensation of methyl (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylate ( 4 ) with NH₂NH₂⋅H₂O. The (5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐carboxylic acid 2‐[(arylamino)carbonyl]hydrazides 6a – 6q were prepared by the reaction of 5 with corresponding substituted aryl isocyanates, and the N‐{5‐[(5α,7α)‐4,5‐epoxy‐3,6‐dimethoxy‐17‐methyl‐6,14‐ethenomorphinan‐7‐yl]‐1,3,4‐oxadiazol‐2‐yl}arenamines 7a – 7q were obtained via the cyclization reaction of 6a – 6q in the presence of POCl₃. The synthesized compounds have a rigid morphine structure, including the 6,14‐endo‐etheno bridge and the 5‐(arylamino)‐1,3,4‐oxadiazol‐2‐yl residue at C(7) adopting the (S)‐configuration (7α). The structures of the compounds were confirmed by high‐resolution mass spectrometry (HR‐MS) and various spectroscopic methods such as FT‐IR, ¹H‐NMR, ¹³C‐NMR, APT, and 2D‐NMR (HETCOR, COSY, INADEQUATE).     

A Novel and Efficient Synthesis of 3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐ones (=3‐[(4,5‐Dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐1‐benzopyran‐2‐ones)

An efficient one‐pot synthesis of 3‐[(4,5‐dihydro‐1H‐pyrrol‐3‐yl)carbonyl]‐2H‐chromen‐2‐one (=3‐[(4,5‐dihydro‐1H‐pyrrol‐3yl)carbonyl]‐2H‐1‐benzopyran‐2‐one) derivatives 4 by a four‐component reaction of a salicylaldehyde 1 , 4‐hydroxy‐6‐methyl‐2H‐pyran‐2‐one, a benzylamine 2 , and a diaroylacetylene (=1,4‐diarylbut‐2‐yne‐1,4‐dione) 3 in EtOH is reported. This new protocol has the advantages of high yields (Table), and convenient operation. The structures of these coumarin (=2H‐1‐benzopyran‐2‐one) derivatives, which are important compounds in organic chemistry, were confirmed spectroscopically (IR, ¹H‐ and ¹³C‐NMR, and EI‐MS) and by elemental analyses. A plausible mechanism for this reaction is proposed (Scheme 2).     

New domino‐reaction for the synthesis of N4‐(5‐aryl‐1,3‐oxathiol‐2‐yliden)‐2‐phenylquinazolin‐4‐amines and 4‐[4‐aryl‐5‐(2‐phenylquinazolin‐4‐yl)‐1,3‐thiazol‐2‐yl]morpholine

The model morpholine‐1‐carbothioic acid (2‐phenyl‐3H‐quinazolin‐4‐ylidene) amide (1) reacts with phenacyl bromides to afford N⁴‐(5‐aryl‐1,3‐oxathiol‐2‐yliden)‐2‐phenylquinazolin‐4‐amines (4) or N⁴‐(4,5‐diphenyl‐1,3‐oxathiol‐2‐yliden)‐2‐phenyl‐4‐aminoquinazoline ( 5 ) by a thermodynamically controlled reversible reaction favoring the enolate intermediate, while the 4‐[4‐aryl‐5‐(2‐phenylquinazolin‐4‐yl)‐1,3‐thiazol‐2‐yl]morpholine ( 8 ) was produced by a kinetically controlled reaction favoring the C‐anion intermediate. ¹H nmr, ¹³C nmr, ir, mass spectroscopy and x‐ray identified compounds ( 4 ), ( 5 ) and ( 8 ).     

1‐Bromo‐2‐(cyclopropylidenemethyl)benzene: A Useful Building Block in the Palladium‐Catalyzed Reaction of 2‐Alkynylbenzenamine

A novel palladium‐catalyzed domino reaction of 1‐bromo‐2‐(cyclopropylidenemethyl)benzene and 2‐alkynylbenzenamine is reported, which generates 2‐(naphthalen‐2‐yl)benzenamines and 5H‐indeno[1,2‐c]quinolines via 6‐endo and 5‐exo cyclization, respectively. The regioselectivity for the final outcome can be affected by phosphine and N‐heterocyclic carbene ligands.