选择性氧化HMF

近年来,利用储量丰富且可再生的生物质资源制备高附加值化学品和液体燃料是目前化学研究领域的热点之一,同时契合可持续发展的国家战略.5-羟甲基糠醛(HMF)是关键的生物质平台化合物之一,广泛应用于制备精细平台化合物、药物的中间体、聚合物的合成、液体燃料的前驱体等.因此,HMF的选择性氧化逐渐成为生物质领域的研究热点.本文主...     

果糖一步转化制备呋喃基燃料：溶剂效应及离子液体修饰活性金属对产物选择性的决定作用

在众多生物基化合物中,2,5-二甲基呋喃(DMF)是一种有实用前景的可再生液体生物质燃料,也是一种具有重要价值的化学品,可作为生产对苯二甲酸的原料.2,5-二甲基四氢呋喃(DMTF)是DMF进一步加氢产物,该化合物比DMF更稳定,适合长期保存;由于具有更高的氢碳比,用作生物燃料燃烧时能够释放更多能量.研究生物质资源制备DMF和DMTF对可再生资源制备液体燃料和化学品具有重要意义.从生物质多糖出发制备这两类化合物,中间经历了水解、脱水、加氢、加氢脱氧等多个反应步骤,每一步反应都十分复杂,包含许多副反应途径.此外,由于每一步反应条件的不兼容性,大多数研究集中在分步反应阶段,鲜有文献能够实现从碳水化合物原料直接转化为DMF和DMTF.发展由生物质一锅法多步耦合转化技术制备化学品和燃料,不仅具有科学意义,而且可大大简化反应过程,避免中间产物分离和损失,节省资源和时间,历来受到化学家和工业界的关注.本文利用离子液体对Ru/C催化剂电子性质的修饰作用以及溶剂效应的影响,设计了离子液体/THF双相体系中果糖直接催化转化制备2,5-二甲基呋喃(DMF)和2,5-二甲基四氢呋喃(DMTF)的新路线.该转化过程耦合了果糖脱水制HMF、HMF加氢及加氢脱氧生成DMF和DMTF等多步反应.通常在HMF加氢转化过程中, Ru/C催化剂的高活性易导致HMF深度加氢生成大量开环产物及气体,我们借助离子液体与有机溶剂的不同溶解性,筛选出[BMIm]Cl/THF双相溶剂体系,使极性HMF在离子液体层反应,生成弱极性的DMF和DMTF能及时被THF萃取出来,有效稳定了目标产物.其次,果糖转化为HMF会产生少量水,通常水的存在易导致HMF发生水合等副反应,对下一步的加氢转化是不利因素;然而在本催化体系中,由于[BMIm]Cl能与水以较强的氢键结合形成水合物,对水分子起到了束缚作用,减少了HMF发生水解、水合等副反应的机会.另一方面,离子液体粘度较大,微量水的存在能降低离子液体层粘度,改善传质,从而提高反应速率.在HMF加氢处理过程中,离子液体对DMF和DMTF的生成起了决定作用.当反应体系中不添加离子液体,以THF为溶剂,反应结束后未检测到DMF生成, DMTF的收率仅为2%,但HMF已经完全转化.取气体样品进行GC分析,发现有部分气相产物生成,包括CO2、CH4和C2H6等.液体混合物进行GC-MS检测,发现产物主要包括DHMTF、5-甲基四氢糠醇(MTFA)、四氢糠醇(TFA)、1,2-戊二醇、DMTF、2-己醇和少量戊醇,产物中所有呋喃环结构的双键都发生加氢反应.以上结果表明,没有离子液体的THF中, Ru/C催化的HMF涉氢反应平衡已发生改变.当反应体系中添加0.2 g离子液体[BMIm]Cl进行HMF的加氢时,此时开始有DMF生成,随着[BMIm]Cl量依次增加, DMF以及DMTF的收率也呈上升趋势.1.0 g离子液体获得两种产物最高收率为68%.然而,如果进一步增加[BMIm]Cl的量到2.0 g,呋喃基液体燃料DMF和DMTF的收率却开始下降.综合以上实验结果,我们认为适量的[BMIm]Cl存在有可能会对催化剂物理化学性质造成影响,从而对产物的选择性起了决定性作用.通过对催化剂进行元素分析、XPS、H2-TPR表征以及一系列对比实验证明,离子液体不仅促进果糖脱水转化为HMF,同时在HMF选择性加氢反应中可修饰活性金属电子性质,改变催化路径,是多步串联反应能够耦合的关键因素.在[BMIm]Cl/THF双相溶剂体系中,离子液体的“溶剂笼效应”促进DMF和DMTF高效生成, THF的萃取功能对目标产物的稳定起了关键作用.以上对催化剂和溶剂的合理设计共同促进高产率呋喃基燃料的获得.该研究实现由六碳糖直接选择转化获取DMF和DMTF,为生物质高效催化转化制备生物基能源化学品提供了新思路.     

催化选择转化多羟基化合物制备高附加值化学品研究进展

对近年来催化转化多羟基化合物制备5-羟甲基糠醛、乙二醇、1,2-丙二醇、1,3-丙二醇等高附加值化学品进行了综述. 分析了果糖、葡萄糖、纤维素等不同结构的碳水化合物制5-羟甲基糠醛存在的挑战, 并对相应的解决方法进行了总结. 对于5-羟甲基糠醛的转化, 我们重点讨论了5-羟甲基糠醛选择性氧化制备2,5-二甲酰基呋喃和2,5-呋喃二甲酸以及它们作为聚合单体的潜在应用. 概述了催化氢解纤维素、糖醇、甘油等多羟基化合物制备乙二醇、1,2-丙二醇、1,3-丙二醇等二元醇的方法, 并对可能的机理进行了讨论. 依据近年来多羟基化合物催化选择性转化制备高附加值化学品的研究现状, 对今后的研究热点进行了展望.     

载体对其负载的Cu-Co双金属催化剂上5-羟甲基糠醛氢解选择性生成2,5-二甲基呋喃的影响

碳-氧键氢解是生物质呋喃基化合物制备交通燃料常见的模型反应,其中5-羟甲基糠醛(HMF)转化为汽油添加剂2,5-二甲基呋喃(DMF)尤为引人关注.本文采用CeO2,ZrO2和Al2O3负载的Cu-Co双金属催化剂用于HMF选择性氢解制DMF的反应中.采用X射线衍射、N2吸附-脱附、投射电镜、H2-程序升温还原、氨-程序升温脱附和元素分析表征了新鲜的和使用过催化剂的结构,并将其与催化活性相关联.Cu-Co/CeO2催化剂通过在大的Cu颗粒上还原C=O键生成了最多的2,5双(羟甲基呋喃)(BHMF).但Cu-Co/Al2O3催化剂具有高度分散的Cu,Cu-Co复合氧化物和大量的弱酸位,因而生成DMF的选择性最高.Cu-Co/ZrO2催化剂则由于存在强酸位,DMF选择性较低,生成了各种过度氢解产物,如2,5而甲基四氢呋喃和5,5-二(亚甲基)双(2-甲基呋喃).因此,考察了Cu-Co/Al2O3催化剂上的反应路径,以及温度、氢气压力和时间等操作条件的影响,使其具有较优的HMF转化率和DMF选择性.     

Highly efficient and N-bromosuccinimide-mediated conversion of carbohydrates to 5-hydroxymethylfurfural under mild conditions

Highly efficient and selective conversion of different carbohydrates to 5-hydroxymethylfurfural (HMF) has been successfully performed with N-bromosuccinimide (NBS) as a promoter. In the presence of single NBS, a 64.2 % yield of HMF from fructose was obtained in N-methylpyrrolidone for 2 h. The effects of time, temperature and reaction media are discussed. It was concluded that the preliminary bromination of substrate could improve the generation of HMF compared to the direct dehydration process. Moreover, the HMF yield could be elevated to 79.6 and 82.3 % when FeCl₃ and SnCl₄ were used as the additives, respectively. Furthermore, the addition of CrCl₃ facilitated the conversion pathway from glucose, sucrose, inulin, or cellulose to HMF. A 57.3, 68.2, 62.4, or 6.1 % yield of HMF was, respectively, obtained in the presence of CrCl₃ and NBS under mild conditions, which will therefore generate a promising application strategy for biomass transformation.     

Synthesis of polymers by use of divalent metal salts of monohydroxyethyl phthalate: Metal-containing isocyanurate-type crosslinked polyurethanes

Divalent metal salts (I) of monohydroxyethyl phthalate have catalytic activity for polymerization of isocyanate groups. The synthesis of novel metal-containing isocyanurate-type crosslinked polyurethanes were investigated by the crosslinking reaction of I in DMF with diisocyanates or urethane prepolymers, that is, diisocyanate adducts of polyethylene glycol. 2,4-Toluene diisocyanate and diphenylmethane diisocyanate were used as diisocyanates, and DMF was the solvent. The crosslinking reactions were followed by determining the gelation time. Gelation time decreased with increasing temperature. The Ca salt was more effective than the Mg salt in the crosslinking reaction. The yields of resulting metal-containing three-dimensional polymers decreased with increasing metal content in the feed. The Ca salt was more easily introduced into the network polymers than the Mg salt was. Decomposition temperatures decreased on introducing metals into the network polymers. Some physical properties of the metal-containing network polymers are also discussed.     

Solution‐Mediated Transformation of a 1D [Zn(Im)(HIm)2(OAc)] Precursor to Several Different 3D Zn(Im)2 Frameworks

1D compound [Zn(Im)(HIm )₂(OAc )] was used as a single precursor of metal and imidazole to prepare several 3‐dimensional (3D ) Zn(Im)₂ frameworks by solution‐mediated transformation. Specifically, three known topologies, zni, coi and crb (BCT ) were obtained using a solution‐mediated transformation with CH₃OH , DMF and DMA as solvent, respectively. Structural studies by ¹³C MAS NMR spectroscopy and TG imply that in the transformation process from 1D compound to coi‐[Zn(Im)₂]•(DMF )_x and crb‐[Zn(Im)₂]•(DMA )_x (ZIF ‐1), DMF and DMA solvent molecules acted as structure‐directing agent and, therefore, were occluded inside the framework, respectively. In contrast, in the formation of zni‐[Zn(Im)₂], no solvent molecules were present in the frameworks; therefore the transformation from 1D compound to zni was induced by temperature. Thus, solution‐mediated transformation of a single precursor (1D compound) approach was established for the synthesis of ZIFs .     

1,1'-二(N-水杨酰腙乙基 )二茂铁及其过渡金属(Ⅱ)的配合物

本文合成了1,1'-二(N-水杨酰腙乙基)二茂铁及其过渡金属配合物,ML.nH~2O[M=Mn(II)、Co(II)、Ni(II)、Cu(II)、Zn(II)和Cd(II)],并用元素分析、UV、IR、^1HNMR、TG-DTA和摩尔电导进行了表征.配体以烯醇式以通过亚胺基氮原子和酰胺基氧负离子与金属离子配位,按摩尔比1:1结合.Ni(II)配合物有一分子DMF配位.大部分配合物比配体热稳定性高.     

Recent Progress in Metal-Catalyzed Selective Oxidation of 5-Hydroxymethylfurfural into Furan-Based Value-Added Chemicals

5-hydroxymethylfurfural (HMF), one of the most significant biomass-derived renewable resources, has been widely utilized to create furan-based value-added chemicals such as 2,5-diformylfuran (DFF), 5-hydroxymethyl-2-furancarboxylic acid (HMFCA), 5-formyl-2-furancarboxylic acid (FFCA), and 2,5-furan dicarboxylic acid (FDCA). Indeed, DFF, HMFCA and FFCA are key intermediate products during the oxidation of HMF to FDCA. Herein, this review aims to demonstrate the recent advances in metal-catalyzed oxidation of HMF into FDCA via two different reaction routes (HMF-DFF-FFCA-FDCA and HMF-HMFCA-FFCA-FDCA). All the four furan-based compounds are comprehensively discussed by the selective oxidation of HMF. Additionally, various metal catalysts, reaction conditions, and reaction mechanisms used to obtain the four different products are systematically reviewed. It is anticipated that this review will provide related researchers with new perspectives and speed up the development of this field.     

纤维素及其衍生物催化脱氧转化制化学品

Biomass, as a renewable carbon resource in nature, has been considered as an ideal starting feedstock to produce various valuable chemicals, fuels, and materials, and thus, can help build a sustainable chemical industry. Because cellulose is one of the richest components in lignocellulosic biomass, the efficient transformation of cellulose plays a crucial role in biomass utilization. However, there are many oxygen-containing groups in cellulose, and therefore, the selective removal of particular functional groups from cellulose becomes an essential step in the synthesis of the chemicals or fuels that can meet the requirements set by current chemical industries. In the past decades, several efficient catalytic systems have been developed to selectively split the C―O bonds inside cellulose and its derivatives, thereby producing various valuable chemicals. In this review article, we highlight recent progress made in the selective deoxygenation of cellulose and its derived key platforms such as glucose and 5-hydroxymethyl furfural (HMF) into ethanol, dimethyl furfural (DMF), 1, 6-hexanediol (1, 6-HD), and adipic acid. The selection of these reactions is primarily because these chemicals are of great significance in chemical industries. More importantly, the formation of these chemicals represents the cleavage of different C―O bonds in biomass molecules. For instance, the synthesis of ethanol requires cleaving of only one C―O bond and two C―C bonds of the glucose unit inside cellulose. If two or more C―O bonds in the sugar or sugar acids are cleaved, olefins, oxygen-reduced sugars, and adipic acid will be attained. HMF has a furan ring linked by hydroxyl/carbonyl groups, and hence, either a furanic compound (e.g., DMF) or linear products (e.g., 1, 6-HD and adipic acid) can be synthesized by selective removal of hydroxyl/carbonyl oxygen or ring oxygen atoms. This article focuses on the selective cleavage of particular C―O bonds via heterogeneous catalysis. Efficient catalytic systems using hydrogenolysis and/or deoxydehydration strategies for these transformations are discussed. Moreover, the functions of typical catalysts and reaction mechanisms are presented to obtain insight into the C―O bond cleavage in these biomass molecules. Additionally, other factors such as reaction conditions that also influence the deoxygenation performance are analyzed. We hope that these knowledge gained on the catalytic deoxygenation of cellulose and its derived platforms will promote the rational design of effective strategies or catalysts in the future utilization of lignocellulosic biomass.     

纤维素及其衍生物催化脱氧转化制化学品

纤维素是木质纤维素生物质中最为丰富的组分,将其催化转化制备高附加值化学品在生物质资源化利用中占据极为重要的一席之地。由于纤维素中氧含量过高,需选择性地脱除部分氧原子才可获得满足当前化学工业对各类高值化学品的要求。近年来,针对纤维素以及由其衍生的关键平台分子葡萄糖和5-羟甲基糠醛(HMF)等催化脱氧的研究已引起广泛关注,并取得诸多重要进展。在此,我们总结了具有代表性的多相催化剂体系,讨论了利用氢解或脱水脱氧策略分别将纤维素和葡萄糖等分子中一个或多个C―O键裁剪制备乙醇、烯烃或己二酸等的研究。我们还着重介绍了HMF和其衍生的呋喃化合物选择性剪切C―OH/C＝O键或呋喃环中的C―O―C键分别制备二甲基呋喃和1, 6-己二醇等催化体系。此外,对各多相催化剂的作用机制和特定C―O断键机理也分别进行了探讨,以期深入理解纤维素及其衍生物的催化脱氧反应。     

Kinetics and mechanism of complex formation of nickel(II) with tetra-N-alkylated cyclam in N,N-dimethylformamide (DMF): comparative study on the reactivity and solvent exchange of the species Ni(DMF)6(2+) and Ni(DMF)5Cl+

13C NMR was used to study the rate of DMF exchange in the nickel(II) cation Ni(DMF)6(2+) and in the monochloro species Ni(DMF)5Cl+ with 13C-labeled DMF in the temperature range of 193-395 K in DMF (DMF = N,N-dimethylformamide). The kinetic parameters for solvent exchange are kex = (3.7 +/- 0.4) x 10(3) s-1, delta H++ = 59.3 +/- 5 kJ mol-1, and delta S++ = +22.3 +/- 14 J mol-1 K-1 for Ni(DMF)6(2+) and kex = (5.3 +/- 1) x 10(5) s-1, delta H++ = 42.4 +/- 4 kJ mol-1, and delta S++ = +6.7 +/- 15 J mol-1 K-1 for Ni(DMF)5Cl+. Multiwavelength stopped-flow spectrophotometry was used to study the kinetics of complex formation of the cation Ni(DMF)6(2+) and of the 100-fold more labile cation Ni(DMF)5Cl+ with TMC (1,4,8,11-tetramethyl-1,4,8,11-tetraazacyclotetradecane) and TEC (1,4,8,11-tetraethyl-1,4,8,11-tetraazacyclotetradecane) in DMF at 298 K and I = 0.6 M (tetra-n-butylammoniumperchlorate). Equilibrium constants K for the addition of the nucleophiles DMF, Cl-, and Br- to the complexes Ni(TMC)2+ and Ni(TEC)2+ were determined by spectrophotometric titration. Formation of the complexes Ni(TMC)2+ and Ni(TEC)2+ was found to occur in two stages. In the initial stage, fast, second-order nickel incorporation with rate constants k1(TMC) = 99 +/- 5 M-1 s-1 and k1 (TEC) = 235 +/- 12 M-1 s-1 leads to the intermediates Ni(TMC)int2+ and Ni(TEC)int2+, which have N4-coordinated nickel. In the second stage, these intermediates rearrange slowly to form the stereochemically most stable configuration. First-order rate constants for the one-step rearrangement of Ni(TMC)int2+ and the two-step rearrangment of Ni(TEC)int2+ are presented. Because of the rapid formation of Ni(DMF)5Cl+, the reactions of Ni(DMF)6(2+) with TMC and TEC are accelerated upon the addition of tetra-n-butylammoniumchloride (TBACl) and lead to the complexes Ni(TMC)Cl+ and Ni(TEC)Cl+, respectively. For initial concentrations such that [TBACl]o/[nickel]o > or = 20, intermediate formation is 230 times (TMC) and 47 times (TEC) faster than in the absence of chloride. The mechanism of complex formation is discussed.     

Ultrafast vibrational dynamics of SCN(-) and N3(-) in polar solvents studied by nonlinear infrared spectroscopy

In this paper, we report on our investigation into the vibrational dynamics of the antisymmetric stretching modes of SCN(-) and N(3)(-) in several polar solvents. We used an infrared (IR) pump-probe method to study orientational relaxation processes. In two aprotic solvents (N,N-dimethylformamide (DMF) and dimethyl sulfoxide (DMSO)), the anisotropy decay shows a bimodal feature, whereas in other solvents the anisotropy decay can be fitted well by a single exponential function. We consider that the relative contribution of fast-decaying components is smaller in the other solvents than in DMF and DMSO. We discuss the possible origins of the different anisotropy decay behavior in different solvents. From the three-pulse IR photon echo measurements for SCN(-) and N(3)(-), we found that the time-correlation functions (TCFs) of vibrational frequency fluctuations decay on two different time scales, one of which is less than 100 fs and the other is approximately 3-6 ps. In aprotic solvents, the fast-decaying components of the TCFs on a <100 fs time scale play an important role in the vibrational frequency fluctuation, although the contribution of collective solvent reorganization in aprotic solvents was clearly observed to have small amplitudes. On the other hand, we found that the amplitude of components that decay in a few picoseconds and/or the constant offset of the TCF in protic solvents is relatively large compared with that in aprotic solvents. With the formation and dissociation of hydrogen bonds between ion solute and solvent molecules, the spectra of different solvated species are exchanged with each other and merged into one band. We considered that this exchange may be an origin of slow-decaying components of the TCFs and that the decay of the TCFs corresponds to the time scales of the exchange for protic solvents such as formamide. The mechanism of vibrational frequency fluctuations for the antisymmetric stretching modes of SCN(-) and N(3)(-) is discussed in terms of the difference between protic and aprotic solvents.     

Chromium(V) peptide complexes: synthesis and spectroscopic characterization

A series of stable Cr(V) model complexes that mimic the binding of Cr(V) to peptide backbones at the C-terminus of proteins have been prepared for N,N-dimethylurea derivatives of the tripeptides Aib3-DMF, AibLAlaAib-DMF, and AibDAlaAib-DMF (Aib = 2-amino-2-methylpropanoic acid, DMF = N,N-dimethylformamide). The Cr(ll) precursor complexes were synthesized by the initial deprotonation of the amide and acid groups of the peptide ligands in DMF with potassium tert-butoxide in the presence of CrCl2. The Cr(II) intermediates thus formed were then immediately oxidized to Cr(V) using tert-butyl hydroperoxide. Spectroscopic and mass-spectrometric analyses of the Cr(V) complexes showed that a new metal-directed organic transformation of the ligand had occurred. This involved a DMF solvent molecule becoming covalently bound to the amine group of the peptide ligand, yielding a urea group, and a third coordinated deprotonated urea nitrogen donor. A metal-directed oxidative coupling has been proposed as a possible mechanism for the organic transformation. The Cr(V/IV) reduction potential was determined for the three Cr(V) complexes using cyclic voltammetry, and in all cases it was quasi-reversible. These are the first isolated and fully characterized Cr(V) complexes with non-sulfur-containing peptide ligands.     

Copper(II) and copper(I) complexes with an open-chain N4 Schiff base ligand modeling CuZn superoxide dismutase: structural and spectroscopic characterization and kinetics of electron transfer

The structure of the complex [CuII(PuPy)](ClO4)2 (PuPy = L = 1,8-bis(2-pyridyl)-2,7-diazaoctadiene-1,7) and the structure of the corresponding copper(I) complex were determined. In CuIIL(ClO4)2, a model compound with CuZnSOD activity, the unit CuIIL2+ has a tetrahedrally distorted square-planar N4 coordination geometry. The copper(I) complex with L was found to be dimeric, (CuIL)2(ClO4)2.DMF (DMF = N,N-dimethylformamide). The binuclear unit (CuIL)2(2+) has a helical structure with two ligands L bridging the two copper atoms to provide tetrahedral N4 coordination of each copper(I). In solutions of (CuIL)2(ClO4)2.DMF, solvent-dependent dissociation occurs according to D reversible 2M (D = (CuIL)2(2+); M = CuILSx+; S = solvent). Stopped-flow spectrophotometry was used to determine the rate constants for the dissociation of the dimer D (kM) and dimerization of the monomer M (kD) for S = acetonitrile and DMF. Equilibrium constants Kdim = kM/kD were determined spectrophotometrically. In aqueous solution, the oxidation of the dimer (CuIL)2(2+) by CoIII(NH3)5Cl2+ and cis- and trans-CoIII(en)2Cl2+ follows a second-order rate law, rate = kox[(CuIL)2(2+)][Co(III)]. Data for rate constant kox and for the activation parameters delta H++ and delta S++ are presented. In DMF, the oxidation of (CuIL)2(2+) by CoIII(NH3)5Cl2+ occurs via the monomer CuIL(DMF)x+ and the dissociation of (CuIL)2(2+) becomes rate-controlling. The reduction of CuIIL2+ by RuII(edta)H2O2- was found to be too fast to be resolved by stopped-flow spectrophotometry. The kinetic results are discussed mechanistically in terms of the redox switch aspects of the system.     

Tetrakis(thiadiazole)porphyrazines. 8. Singlet oxygen production, fluorescence response and liposomal incorporation of tetrakis(thiadiazole)porphyrazine macrocycles [TTDPzM] (M = Mg(II)(H2O), Zn(II), Al(III)Cl, Ga(III)Cl, Cd(II), Cu(II), 2H(I))

The photoactivity for the generation of singlet oxygen, (1)O(2), the key cytotoxic agent in the anticancer treatment known as photodynamic therapy (PDT), and the fluorescence response of the highly electron-deficient tetrakis(thiadiazole)porphyrazines of formula [TTDPzM] (M = Mg(II)(H(2)O), Zn(II), Al(III)Cl, Ga(III)Cl, Cd(II), Cu(II), 2H(I)) were examined (c ? 10(-5) M) in dimethylformamide (DMF) and/or in DMF preacidified with HCl (DMF/HCl; [HCl] = 1-4 × 10(-4) M). The singlet oxygen quantum yield (Φ(Δ)) of all the compounds was determined by using a widely employed procedure based on the selective oxidation of the 1,3-diphenylisobenzofuran (DPBF), modified in part as reported. The list of the Φ(Δ) values indicates excellent photosensitizing properties for the series of compounds carrying "closed shell" metal ions, with values measured in DMF/HCl respectful of the "heavy atom effect" for the first four lighter centers, increasing in the order Mg(II) < Al(III) < Zn(II) < Ga(III). Data of Φ(Δ) concerning the unmetalated species [TTDPzH(2)], present in solution in the form of the corresponding anion [TTDPz](2-), and the Cd(II) and Cu(II) complexes are also presented and discussed. Extensive discussion is also developed on the fluorescence quantum yield values Φ(F), with data on the Mg(II) and Al(III) compounds in DMF/HCl (0.44 and 0.53, respectively) indicative of promising perspectives for applications in fluorescence imaging techniques. The Φ(F) data of the studied porphyrazine series, Φ(F)(Pz), correlate linearly with those of the homologous phthalocyaninato complexes, Φ(F)(Pc), suggesting a closely similar behaviour between the two classes of compounds. The incorporation of [TTDPzZn] into liposomes was successfully achieved following the detergent depletion method (DDM) from a mixed micellar solution by means of gel-filtration. Retention of [TTDPzZn] (~40%) in its photoactive monomeric form into liposomes is proved by absorption and fluorescence spectra, this proposing the Zn(II) complex as a promising candidate for use in PDT.     

Crystal-to-crystal transformations in heterometallic yttrium(III)-copper(I) iodide derivatives in a confined solvent-free environment: influence of solvated yttrium cations on the nuclearity and dimensionality of iodocuprate clusters

The solvated yttrium iodide precursors [Y(L)(8)]I(3) (L = DMSO or DMF), prepared in situ by stirring YI(3)(Pr(i)OH)(4) in DMSO or DMF, react with CuI in the presence of NH(4)I to give ionic hetero-metallic species [Y(DMSO)(8)][Cu(2)(mu-I)I(4)] (1) and [Y(DMF)(8)][Cu(4)(mu(3)-I)(2)(mu-I)(3)I(2)] (2) in excellent yields. Re-crystallization of 1 from DMF afforded the mixed-solvate complex [Y(DMSO)(6)(DMF)(2)][CuI(3)][I] (3). Compounds 2 and 3 undergo unique crystal-to-crystal transformation via progressive substitution of DMF by water molecules in a confined, solvent-free environment. Thus, crystals of 3 transform into [Y(DMSO)(6)(H(2)O)(2)][CuI(3)][I] (4), whereas a discrete ion-pair assembly of 2 is first converted into a 1-D zig-zag structure [Y(DMF)(6)(H(2)O)(2)](3+)[Cu(7)(mu(4)-I)(3)(mu(3)-I)(2)(mu-I)(4)(I)](1infinity)(3-) (5) and finally into a 2-D sheet containing mixed-valent copper atoms, [Y(DMF)(6)(H(2)O)(3)](3+)[Cu(I)(7)Cu(II)(2)(mu(3)-I)(8)(mu-I)(6)](2infinity)(3-) (6). The bi- and tetrafurcate H-bonding between water ligands on yttrium and iodides of the Cu-I cluster plays a pivotal role in the evolution of structures 4-6. Formation of a wide range of iodocuprate structures in 1-6, from discrete mono-, di- or tetranuclear units to one- and two-dimensional extended arrays, reflects the influence of solvated yttrium cations on the nuclearity and dimensionality of Cu-I clusters. TG-DTA-MS studies and DFT calculations for these complexes have also been carried out in order to determine their thermal stability and have insight about aforesaid transformations.     

Preconcentration of iron (III), cobalt (II) and copper (II) nitroso-R complexes on tetradecyldimethylbenzylammonium iodide-naphthalene adsorbent

Iron, cobalt and copper form coloured water soluble anionic complexes with disodium 1-nitroso-2-naphthol-3-6-disulphonate (nitroso R-salt). The anionic complex is retained quantitatively as a water insoluble neutral ion associated complex (M-nitroso R-TDBA) on tetradecyldimethylbenzylammonium iodide on naphthalene (TDBA(+)I(-)-naphthalene) packed column in the pH range of: Fe(III): 3.1-6.5, Co: 3.4-8.5 and Cu 5.9-8.0 when their solutions are passed individually over this adsorbent at a flow rate of 0.5-5.0 ml/min. The solid mass consisting of an ion associated metal complex along with naphthalene is dissolved out of the column with 5 ml dimethylformamide/chloroform and metals are determined spectrophotometrically. The absorbance is measured at 710 nm for iron, 425 nm for cobalt and 480 nm for copper. Beers law is obeyed in the concentration range 9.2-82 mug of iron, 425 nm for cobalt cobalt and 3.0-62 mug of copper in 5 ml of final DMF/CHCl(3) solution. The molar absorptivities are calculated to be Fe: 7.58 x 10(3), Co: 1.33 x 10(4) and Cu: 4.92 x 10(4)M(-1)cm(-1). Ten replicate determinations containing 25 mug of iron, 9.96 mug of cobalt and 3.17 mug of copper gave mean absorbances 0.677, 0.450 and 0.490 with relative standard deviations of 0.88, 0.98 and 0.92%, respectively. The interference of large number of metals and anions on the estimations of these metals has been studied. The optimized conditions so developed have been employed for the trace determination of these metals in standard alloys, waste water and fly ash samples.     

The Increasing Value of Biomass: Moving From C6 Carbohydrates to Multifunctionalized Building Blocks via 5-(hydroxymethyl)furfural

Recent decades have been marked by enormous progress in the field of synthesis and chemistry of 5-(hydroxymethyl)furfural (HMF), an important platform chemical widely recognized as the “sleeping giant” of sustainable chemistry. This multifunctional furanic compound is viewed as a strong link for the transition from the current fossil-based industry to a sustainable one. However, the low chemical stability of HMF significantly undermines its synthetic potential. A possible solution to this problem is synthetic diversification of HMF by modifying it into more stable multifunctional building blocks for further synthetic purposes.     

VISCOMETRIC STUDY OF POLY(METHYL METHACRYLATE) AND POLYSTYRENE BLENDS IN DIFFERENT SOLVENTS

The intermolecular interaction between poly(methyl methacrylate) (PMMA) and polystyrene (PS) intetrahydrofuran (THF) and N,N'-dimethyl formamide (DMF) solvents was studied at 28℃ using a dilute solution viscometrymethod. Solvent is believed to play a key role in characterizing the viscosity behavior of the polymer solution. The intrinsicviscosity and viscosity interaction parameter were experimentally measured for the binary (solvent/polymer) and for theternary systems in two solvents. The compatibility of the polymer mixture was discussed in terms of the sign of △b_m. Theresults show that the compatibility of PMMA/PS blend in DMF is larger than that in THF.