Impact of phase ratio, polydimethylsiloxane volume and size, and sampling temperature and time on headspace sorptive extraction recovery of some volatile compounds in the essential oil field

This study evaluates concentration capability of headspace sorptive extraction (HSSE) and the influence of sampling conditions on HSSE recovery of an analyte. A standard mixture in water of six high-to-medium volatility analytes (isobutyl methyl ketone, 3-hexanol, isoamyl acetate, 1,8-cineole, linalool and carvone) was used to sample the headspace by HSSE with stir bars coated with different polydimethylsiloxane (PDMS) volumes (20, 40, 55 and 110 microL, respectively), headspace vial volumes (8, 21.2, 40, 250 and 1000 mL), sampling temperatures (25, 50 and 75 degrees C) and sampling times (30, 60 and 120 min, and 4, 8 and 16 h). The concentration factors (CFs) of HSSE versus static headspace (S-HS) were also determined. Analytes sampled by the PDMS stir bars were recovered by thermal desorption (TDS) and analysed by capillary GC-MS. This study demonstrates how analyte recovery depends on its physico-chemical characteristics and affinity for PDMS (octanol-water partition coefficients), sampling temperatures (50 degrees C) and times (60 min), the volumes of headspace (40 mL) and of PDMS (in particular, for high volatility analytes). HSSE is also shown to be very effective for trace analysis. The HSSE CFs calculated versus S-HS with a 1000 mL headspace volumes at 25 degrees C during 4 h sampling ranged between 10(3) and 10(4) times for all analytes investigated while the limits of quantitation determined under the same conditions were in the nmol/L range.     

Comparison of different extraction methods for the determination of α‐ and β‐thujone in sage (Salvia officinalis L.) herbal tea

Salvia officinalis L. (sage) is an important industrial plant used both for food and pharmaceutical purposes. The terpene fraction of this plant is responsible for many of its therapeutic and culinary properties. We used different extraction methods Tenax TA® purge and trap, headspace (HS) solid‐phase microextraction, HS sorptive extraction, and stir bar sorptive extraction to analyze the terpene fraction extracted from sage tea by GC–MS. Twenty compounds were identified, including α‐, β‐thujone, and several other oxygenated monoterpenes (1,8‐cineole, linalool, camphor, boneol, and bornyl acetate) and oxygenated sesquiterpenes (caryophyllene oxide, viridiflorol, humulene epoxide I, II, and III). Tenax TA® and HS sorptive extraction extracted a lower number of identified compounds, whereas HS solid‐phase microextraction allowed the complete extraction of volatiles with particular reference to α‐ and β‐thujone. The importance of the determination of thujones content in sage herbal tea is also discussed.     

Solvent‐enhanced headspace sorptive extraction in the analysis of the volatile fraction of matrices of vegetable origin

The solvent‐enhanced headspace sorptive extraction technique aims at modifying PDMS polarity using a solvent to increase its concentration capability. In solvent‐enhanced headspace sorptive extraction, a PDMS tubing closed at both ends by small glass stoppers and filled with an organic solvent is suspended in the sample headspace for a fixed time. After sampling, the sampled analytes are recovered from the PDMS tubing by thermal desorption and online transferred to a GC–flame ionization detector or GC‐MS system for analysis. Cyclohexane, iso‐octane, ethyl acetate, acetone, acetonitrile and methanol were tested as PDMS modifiers to sample the volatile fractions of sage (Salvia lavandulifolia Vahl.), thyme (Thymus vulgaris L.) and roasted coffee. Ethyl acetate was found to be the most effective PDMS modifier for all matrices investigated; although to a lesser extent, cyclohexane also increased component recoveries with sage and thyme. Acetone, acetonitrile and methanol did not increase PDMS recovery, while isooctane was excluded because of its interaction with the polymer. The results show that solvent‐modified PDMS extends the range of sampled headspace components with different polarities, increases the recovery of many of them, improves sensitivity in trace analysis, speeds up recovery and gives repeatability comparable with that of unmodified PDMS.     

Quantitative analysis of perfumes in talcum powder by using headspace sorptive extraction

Quantitative analysis of perfume dosage in talcum powder has been a challenge due to interference of the matrix and has so far not been widely reported. In this study, headspace sorptive extraction (HSSE) was validated as a solventless sample preparation method for the extraction and enrichment of perfume raw materials from talcum powder. Sample enrichment is performed on a thick film of poly(dimethylsiloxane) (PDMS) coated onto a magnetic stir bar incorporated in a glass jacket. Sampling is done by placing the PDMS stir bar in the headspace vial by using a holder. The stir bar is then thermally desorbed online with capillary gas chromatography-mass spectrometry. The HSSE method is based on the same principles as headspace solid-phase microextraction (HS-SPME). Nevertheless, a relatively larger amount of extracting phase is coated on the stir bar as compared to SPME. Sample amount and extraction time were optimized in this study. The method has shown good repeatability (with relative standard deviation no higher than 12.5%) and excellent linearity with correlation coefficients above 0.99 for all analytes. The method was also successfully applied in the quantitative analysis of talcum powder spiked with perfume at different dosages.     

Sorptive tape extraction in the analysis of the volatile fraction emitted from biological solid matrices

Sorptive tape extraction (STE) is a recent sorption-based sampling technique in which a flexible polydimethylsiloxane (PDMS) tape is used to recover analytes at the surface of a solid matrix by direct contact as well as from the headspace in equilibrium with it. Solutes thus enriched on the inert PDMS material can be recovered either by solvent desorption or by thermo-desorption. The concentration capability of both direct contact and headspace STE was evaluated by sampling (a) aromatic plants to study the reaction of a vegetable matrix submitted to stress, and (b) fruits at the surface of the pulp or inside the pulp; the composition of the volatile fraction released from the skin when a perfume is sprayed on the back of the hand was also studied. The concentration capability of direct contact and headspace STE was compared to that of HSSE with a 20 microL PDMS twister and HS-SPME with a PDMS 100 microm fibre, by determining the relative abundances (RA) of the characterizing components of the aromatic plants under investigation. Repeatability and influence of tape surface on STE recovery were also evaluated.     

Speciation of inorganic and tetramethyltin by headspace solid‐phase microextraction and gas chromatography–mass spectrometry

A headspace solid‐phase microextraction (HS‐SPME) method coupled to GC‐MS was developed in order to determine trace levels of tetramethyltin (TeMT) and inorganic tin (iSn) after ethylation to tetraethyltin (TeET) in various matrices. The derivatization of iSn and the extraction of both TeMT and iSn as TeET were performed in one step. Sodium tetraethylborate (NaBEt₄) was used as derivatization agent and the volatile derivatives were absorbed on a PDMS‐coated fused silica fiber. The conditions for the HS‐SPME procedure were optimized in order to gain in repeatability and sensitivity. Several critical parameters of GC‐MS were also studied. The detection of TeMT and iSn as TeET peaks was performed by the SIM mode. The precision of the proposed method is satisfactory providing RSD values below 10% for both tin species and good linearity up to 10 μg/L. The developed method was successfully applied to the determination of tin species in several samples like canned fish, fish tissues, aquatic plants, canned mineral water and sea water. The proposed HS‐SPME‐GC‐MS method was proved suitable to monitor the concentration levels of toxic tin compounds in environmental and biological samples.     

Headspace stir bar sorptive extraction-gas chromatography/mass spectrometry characterization of the diluted vapor phase of cigarette smoke delivered to an in vitro cell exposure chamber

Advanced smoke generation systems, such as the Borgwaldt RM20S^® smoking machine used in combination with the BAT exposure chamber, allow for the generation, dilution and delivery of fresh cigarette smoke to cell or tissue cultures for in vitro cell culture analyses. Recently, our group confirmed that the Borgwaldt RM20S^® is a reliable tool to generate and deliver repeatable and reproducible exposure concentrations of whole smoke to in vitro cultures [1]. However, the relationship between dose and diluted smoke components found within the exposure chamber has not been characterized. The current study focused on the development of a headspace stir bar sorptive extraction (HSSE) method to chemically characterize some of the vapor phase components of cigarette smoke generated by the Borgwaldt RM20S^® and collected within a cell culture exposure chamber. The method was based on passive sampling within the chamber by HSSE using a Twister™ stir bar. Following exposure, sorbed analytes were recovered using a thermal desorption unit and a cooled injection system coupled to gas chromatograph/mass spectrometry for identification and quantification. Using the HSSE method, sixteen compounds were identified. The desorption parameters were assessed using ten reference compounds and the following conditions led to the maximal response: desorption temperature of 200 °C for 2 min with cryofocussing temperature of −75 °C. During transfer of the stir bars to the thermal desorption system, significant losses of analytes were observed as a function of time; therefore, the exposure-to-desorption time interval was kept at the minimum of 10 ± 0.5 min. Repeatability of the HSSE method was assessed by monitoring five reference compounds present in the vapor phase (10.1–12.9% RSD) and n-butyl acetate, the internal standard (18.5% RSD). The smoke dilution precision was found to be 17.2, 6.2 and 11.7% RSD for exposure concentrations of 1, 2 and 5% (v/v) cigarette vapor phase in air, respectively. A linear response of analyte abundance was observed as a function of dilution. Extrapolation to 100% (v/v) cigarette vapor phase, i.e., undiluted smoke, gave yields for the five compounds ranging from 6 to 450 ng for 10 min exposure.     

Automated headspace solid-phase dynamic extraction to analyse the volatile fraction of food matrices

High concentration capacity headspace techniques (headspace solid-phase microextraction (HS-SPME) and headspace sorptive extraction (HSSE)) are a bridge between static and dynamic headspace, since they give high concentration factors as does dynamic headspace (D-HS), and are as easy to apply and as reproducible as static headspace (S-HS). In 2000, Chromtech (Idstein, Germany) introduced an inside-needle technique for vapour and liquid sampling, solid-phase dynamic extraction (SPDE), also known as "the magic needle". In SPDE, analytes are concentrated on a 50 microm film of polydimethylsiloxane (PDMS) and activated carbon (10%) coated onto the inside wall of the stainless steel needle (5 cm) of a 2.5 ml gas tight syringe. When SPDE is used for headspace sampling (HS-SPDE), a fixed volume of the headspace of the sample under investigation is sucked up an appropriate number of times with the gas tight syringe and an analyte amount suitable for a reliable GC or GC-MS analysis accumulates in the polymer coating the needle wall. This article describes the preliminary results of both a study on the optimisation of sampling parameters conditioning HS-SPDE recovery, through the analysis of a standard mixture of highly volatile compounds (beta-pinene, isoamyl acetate and linalool) and of the HS-SPDE-GC-MS analyses of aromatic plants and food matrices. This study shows that HS-SPDE is a successful technique for HS-sampling with high concentration capability, good repeatability and intermediate precision, also when it is compared to HS-SPME.     

Headspace Single-Drop Microextraction with Gas Chromatography for Determination of Volatile Halocarbons in Water Samples

A simple, rapid and inexpensive procedure for extraction and analysis of volatile halocarbons in water samples was presented using the headspace single-drop microextraction (HS-SDME) technique and gas chromatography with microcell electron capture detector (GC-μECD). Operation parameters. such as extraction solvent. headspace volume. organic drop volume. salt concentration. temperature and sampling time, were studied and optimized. Extraction of 10 volatile halocarbon compounds was achieved using the optimized method. Calibration curves of 10 target compounds yielded good linearity in the respective range of concentration (R ² ≥ 0.9968, chlorodibromomethane in the concentration range of 0.05–50 μg/L). The limits of detection were found between 0.002 (tetrachloroethene) and 0.374μg/L (1,1,2-trichloroethane). and relative standard deviations (RSD%) ranged between 4.3 (chloroform) and 9.7% (1,1,2,2-tetrachloroethane). Spiked recoveries of tap water and ground water agreed well with the known values between 118.97 (20.0μg/L of 1,1,2-trichloroethane) and 82.61% (10.0μg/L of tetrachloroethene), demonstrating that the HS-SDME combined GC-μECD was a useful and reliable technique for the rapid determination of volatile halocarbon compounds in water samples.     

Impact of water/PDMS phase ratio,volume of PDMS,and sampling time on Stir Bar Sorptive Extraction (SBSE) recovery of some pesticides with different KO/W

In Stir Bar Sorptive Extraction (SBSE) organic analytes are enriched from aqueous samples by sorption onto a thick film of polydimethylsiloxane (PDMS) coated on a glass‐enveloped magnet. Sampled analytes are recovered by thermodesorption (TDS) and analysed on‐line by cGC‐MS. This study evaluates the SBSE recovery as a function of K_O/W, the phase ratio (β), PDMS volume (20, 40, and 110 μL), sample volumes (4, 10, 100, and 1000 mL), and sampling time (0.67, 1, 2, 4, 5, 6, and 24 h) for three pesticides with different K_O/W [parathion methyl (K_O/W: 7.24×10²), β‐endosulfan (K_O/W: 6.8×10³), and buprofezin (K_O/W: 2.0×10⁴)]. Experimental recoveries with SBSE in reasonable sampling times were found to be mainly conditioned by β, which must be as low as possible either by operating on small sample volumes or by using stir bars coated with high PDMS volume when samples of relatively large volume are analysed.     

碳纳米管顶空固相微萃取测定水中的多溴联苯醚

建立了顶空固相微萃取联结气相色谱-电子捕获检测器（HS-SPME-GC-ECD）测定水中多溴联苯醚的方法。制作了多壁碳纳米管涂层固相微萃取探头。优化了萃取时间,萃取温度,搅拌速度,顶空体积,溶液的pH,离子强度及有机溶剂等影响萃取效率的各种因素。比较了室温和100 ℃顶空萃取和直接萃取的效率。结果表明,室温下直接萃取比顶空萃取的效率高2-4倍,而在100 ℃时顶空萃取比直接萃取的效率高1-8倍。除BDE-154外,无论直接萃取还是顶空萃取,100 ℃时的萃取效率均高于室温。方法的线性范围50-1600 ng/L,相关系数为0.995-0.998,5种多溴联苯醚的最低检出限（S/N=3）为1.14-16.25 ng/L,相对标准偏差（RSD%,n=5）小于10%。本方法用于真实水样的测定,回收率为74.2%-98.7%。     

Headspace needle-trap analysis of priority volatile organic compounds from aqueous samples: application to the analysis of natural and waste waters

Combining headspace (HS) sampling with a needle-trap device (NTD) to determine priority volatile organic compounds (VOCs) in water samples results in improved sensitivity and efficiency when compared to conventional static HS sampling. A 22 gauge stainless steel, 51-mm needle packed with Tenax TA and Carboxen 1000 particles is used as the NTD. Three different HS-NTD sampling methodologies are evaluated and all give limits of detection for the target VOCs in the ng L⁻¹ range. Active (purge-and-trap) HS-NTD sampling is found to give the best sensitivity but requires exhaustive control of the sampling conditions. The use of the NTD to collect the headspace gas sample results in a combined adsorption/desorption mechanism. The testing of different temperatures for the HS thermostating reveals a greater desorption effect when the sample is allowed to diffuse, whether passively or actively, through the sorbent particles. The limits of detection obtained in the simplest sampling methodology, static HS-NTD (5 mL aqueous sample in 20 mL HS vials, thermostating at 50 °C for 30 min with agitation), are sufficiently low as to permit its application to the analysis of 18 priority VOCs in natural and waste waters. In all cases compounds were detected below regulated levels.     

Influence of polydimethylsiloxane outer coating and packing material on analyte recovery in dual-phase headspace sorptive extraction

Dual phase twisters (DP twisters), consisting of a polydimethylsiloxane (PDMS) outer coating and a second complementary (ad)sorbent as inner packing, have recently been shown to extend the applicability of headspace sorptive extraction (HSSE). In comparison to HSSE using PDMS only, the recovery of analytes from the headspace of a solid or liquid matrix is increased by combining the concentration capabilities of two sampling materials operating on different mechanisms (sorption and adsorption). This study compares the performance of DP twisters consisting of different PDMS outer coatings and different packing materials, including Tenax GC, a bisphenol-PDMS copolymer, Carbopack coated with 5% of Carbowax and beta-cyclodextrin, for the analysis of the headspace of roasted Arabica coffee, dried sage leaves and an aqueous test mixture containing compounds with different water solubility, acidity, polarity and volatility as test samples. In general, DP twisters showed a higher concentration capability than the corresponding conventional PDMS twisters for the analytes considered. The highest recoveries were obtained with DP twisters consisting of 0.2mm thick PDMS coating combined with Tenax GC, a bisphenol-PDMS copolymer and Carbopack coated with 5% of Carbowax as inner adsorption phase.     

Headspace SPME followed by GC/PFPD for the analysis of malodorous sulfur compounds in liquid industrial effluents

Headspace SPME was used to analyse malodorous sulfur compounds in liquid industrial effluents. A pulsed flame photometric detector (PFPD) was selected for a specific and sensitive analysis. Two fibres, PDMS/Dvb and PDMS/Carboxen, which are particularly convenient for extracting small and volatile molecules were tested. To compare these fibres, both sensitivity and artefact formation were considered. The PDMS/Carboxen fibre showed the lower limits of detection and moreover the least artefact formation yields. It was therefore selected and headspace SPME extraction conditions were optimised. Limits of detection of the target compounds evaluated were 12–31 ng L^–1 and repeatability was around 7%. Due to the adsorption mechanism involved, extraction is strongly influenced by the sample matrix and the low affinity compounds can suffer displacement effects. To investigate the occurrence of this phenomenon, two sampling times corresponding to non-equilibrium (5 min) and equilibrium conditions (60 min) were investigated. An external calibration was carried out by using standard solutions for both sampling times. The developed procedure was then compared to the standard addition method on a real industrial effluent. The results obtained from the two methods and for the two extraction times were in good agreement, demonstrating that even a long sampling time can be used. Therefore, the simple and timesaving external calibration was defined as relevant for an accurate quantification of sulfur compounds by headspace SPME.     

Phosphorus and Its Water-Extractable Inorganic Form in Medicinal Herb Infusions

Abstract

The concentration of total phosphorus (P), its water-extractable inorganic form (P-PO₄), and Mg, Mn, Cu, Zn, and Fe, was established in 57 samples of Polish medicinal herbs originating from 6 plant species—Mentha piperita, Urtica dioica, Salvia officinalis, Melissa officinalis, Tussilago farfara, and Betula sp. Total P, P-PO₄, and Mg were determined at average levels of mg/g, whereas the other elements were at mg/kg of dry plant weight. A higher level of P and P-PO₄ was detected in Menthae piperitae folium and Salviae folium—plants of the same Labiatae family. With the other elements, an extremely high level of total Mn and Zn was found in Betulae folium. Analysis of relations between P, P-PO₄, and the essential elements in the study showed that an especially strong inter-relation occurred in the pairs: P and P-PO₄, P-PO₄ and Mg, Mn and Zn, both between their total concentrations and extractable forms. This would indicate synergistic activity on the part of these elements in the physiology of plants.

GRAPHICAL ABSTRACT      

Analysis of the Volatile Components in the Leaves of Cinna-momum camphora by Static Headspace Gas Chromatography Mass Spectrometry Combined with Accurate Weight Measurement

The volatile components in the leaves of C. camphora were analyzed by static headspace‐gas chromatography/mass spectrometry (HS‐GC‐MS) combined with accurate weight measurement. Accurate weight measurement obtained by Time‐of‐Flight mass spectrometry (TOF‐MS) helped to confirm the identification of volatiles in the analysis. 59 volatile components in the leaves of C. camphora were identified, which mainly included cis‐3‐hexen‐1‐ol (5.6%), 3‐hexen‐1‐ol, acetate (Z) (11.1%), β‐caryophyllene (15.4%), bicyclogermarene (8.4%), trans‐nerolidol (19.5%) and 9‐oxofarnesol (7.7%). The results show that method using HS‐GC‐MS combined with accurate weight measurement achieves reliable identification and has extensive application in the analysis of volatile components present in complex samples.     

Considerations on Static and Dynamic Sorptive and Adsorptive Sampling to Monitor Volatiles Emitted by Living Plants

Static and dynamic headspace sampling have been applied for the enrichment of volatiles emitted by living plants. For solid phase microextraction (SPME) the sorptive fibers polydimethylsiloxane (PDMS) and polyacrylate (PA) have been compared and, in accordance with the like‐like principle, polar compounds exhibit more affinity for the PA fiber while apolar solutes favor the PDMS fiber. For dynamic sampling, tubes packed with PDMS particles show greater inertness than Tenax; some Tenax decomposition products, e.g. benzaldehyde and acetophenone, interfere with the analyses. With PDMS particles operated in the breakthrough mode, the obtained profiles are similar to those obtained by SPME on the PA fiber. Recoveries relative to a packed PDMS bed are 85% for Tenax, 2.4% for SPME‐PDMS, and 6.2% for SPME‐PA.     

Determination of aromatic compounds in eluates of pyrolysis solid residues using HS-GC-MS and DLLME-GC-MS

A method for the determination of 15 aromatic hydrocarbons in eluates from solid residues produced during the co-pyrolysis of plastics and pine biomass was developed. In a first step, several sampling techniques (headspace solid phase microextraction (HS-SPME), static headspace sampling (HS), and dispersive liquid-liquid microextraction (DLLME) were compared in order to evaluate their sensitivity towards these analytes. HS-SPME and HS sampling had the better performance, but DLLME was itself as a technique able to extract volatiles with a significant enrichment factor.HS sampling coupled with GC-MS was chosen for method validation for the analytes tested. Calibration curves were constructed for each analyte with correlation coefficients higher than 0.999. The limits of detection were in the range of 0.66-37.85 ng/L. The precision of the HS method was evaluated and good repeatability was achieved with relative standard deviations of 4.8-13.2%. The recoveries of the analytes were evaluated by analysing fortified real eluate samples and were in the range of 60.6-113.9%.The validated method was applied in real eluate samples. Benzene, toluene, ethylbenzene and xylenes (BTEX) were the compounds in higher concentrations.The DLLME technique coupled with GC-MS was used to investigate the presence of less volatile contaminants in eluate samples. This analysis revealed the presence of significant amounts of alkyl phenols and other aromatic compounds with appreciable water solubility.     

Phenylpropanoids from Medicinal Plants: Distribution, Classification, Structural Analysis, and Biological Activity

The literature and our own research results on phenylpropanoids from medicinal plants were reviewed and systematized. Data were presented for the distribution of phenylpropanoids. Their classification was proposed. The biological structure-activity relationships for compounds found in roseroot (Rhodiola rosea), thorny eleutherococcus (Eleutherococus senticosus), common lilac (Syringa vulgaris), purple echinacea (Echinacea purpurea), medicinal melissa (Melissa officinalis), variegated milk-thistle (Silybum marianum), and others were discussed.     

Headspace sampling of the volatile fraction of vegetable matrices

The evolution of vapour phase sampling of the volatile fraction of vegetable matrices, or of products directly related to them, over the period 1996-2007 is reviewed. High concentration capacity headspace (HCC-HS) and dynamic headspace (D-HS) techniques, that is headspace sampling approaches where the analytes in the vapour phase are concentrated into a sorbent, an adsorbent or a solvent, are considered. Advantages, disadvantages and applications to the vegetable field of several successful techniques based on these approaches are critically presented, including in-tube sorptive extraction (INCAT, HS-SPDE), headspace sorptive extraction (HSSE), solid-phase aroma concentrate extraction (SPACE), large surface area HCC-HS sampling (MESI, MME, HS-STE), headspace liquid-phase microextraction (HS-LPME) and dynamic headspace samplings (D-HS). The developments necessary to overcome some of the limits of the above approaches and techniques are also discussed in view of their application to new fields.