Structure and dynamics of water at water|Pt interface as seen by molecular dynamics computer simulation

Five molecular dynamics computer simulations were performed to study the structural and dynamical properties of water next to uncharged and charged Pt surfaces. The results show that the structure of a water layer adsorbed on the metal surface is very sensitive to the details of the water–metal potential. While patches of short-living hexagonal ice-like structure are observed in the adsorbed water layer next to the uncharged Pt(111) surface, a square lattice solid-like structure is seen for the layer on top of the uncharged Pt(100) surface. The orientational ordering for the following two layers of water next to uncharged Pt is displaying a preference towards the orientations that are characteristic of hexagonal ice-I, while water is liquid-like in these layers. In the presence of a high value external electric field water reorients and undergoes a layering transition.     

Effect of external electrical field on phase behavior and morphology development of polymer dispersed liquid crystal

Phase diagrams for mixtures of liquid crystal (LC)/monomer with and without an external electrical field applied have been established using polarized light microscope (PLM).The (isotropic + nematic) coexistent phase region and (isotropic + isotropic) phase boundary of LC/monomer mixtures were observed to shift upward to higher temperatures when the external electrical field exists. It was found that the electrical field applied during the cross-linking polymerization has a significant influence on the phase diagrams for the LC/polymer mixtures by rendering the coexistent phase regions shift upward to higher temperatures. The influence of the external electrical field on the processes of the isotropic-isotropic phase separation and liquid crystal ordering in PDLC formation has also been investigated. The results revealed that both the processes could be highly accelerated by the electrical field.     

Molecular orientation of monododecyl pentaethylene glycol at water/air and water/oil interfaces. A molecular dynamics computer simulation study

With a molecular dynamics computer simulation we investigated the dynamic properties of a monododecyl pentaethylene glycol (C₁₂E₅) molecule adsorbed at air/water and oil/water interfaces. In these simulations we investigated the molecular orientation of the surfactant molecules in detail. At the air/water interface the maximum of the C₁₂ chain tilt angle distribution measured with respect to the water surface is about 50°. This result is in fairly good agreement with neutron reflection experiments of monododecyl glycol ethers at the air/water interface. At the oil/water interface no significant changes were detected in the molecular orientation. We found that at equilibrium oil molecules penetrate into the hydrophobic monododecyl layer, this was also found by neutron reflection studies of the interactions between C₁₂E₅ and dodecane. The observed oil penetration results in an increase in the surface area per surfactant molecule. Received: 16 July 1999/Accepted in revised form: 28 August 1999     

Aggregation states and molecular motion of polymer ultrathin films prepared at the air/water interface

Surface structure and dynamics in three different polymeric ultrathin systems, such as organosilane monolayers, poly(methyl methacrylate) (PMMA) brushes and poly(amido amine) dendrimer monolayers are discussed.     

H NMR study of hydrogen bonding and molecular dynamics of 5CB confined to molecular sieves

It has been found that the main mechanism of ¹H protons spin–lattice relaxation of bulk 5CB at 200 MHz is its intramolecular motion, namely, the reorientation of CH₂ and CH₃ groups of its alkyl chain. Activation parameters of such motions have been estimated.

Drastic decrease in proton spin–lattice relaxation times at the nematic-to-isotropic phase transition can be explained by the activation of molecular translational diffusion and reorientations around long and short molecular axes of bulk 5CB.

Our NMR analysis revealed the slowing-down of molecular dynamics of confined 5CB molecules and their fragments. This can be explained by the interaction of some part of 5CB molecules with the surface active Si(Al)–OH centers of MCM matrix via hydrogen bonds of Si(Al)–OHN≡C-type.     

Topography of bent-core liquid crystals at the air/liquid crystal interface

Bent-core liquid crystals show a variety of novel structures involving the interplay of molecular bend, tilt and polarisation. Here we investigate the microstructures of the B4, B7 and the dark conglomerate (DC) phases at the air/liquid crystal interface. In these phases, bent-core molecules undergo complex self-assembly, forming helical nanofilaments (the B4 phase), layer undulations (the B7 phase) and disordered focal conics (the DC phase) in the bulk. However, due to the fluidity of the phases and the homeotropic alignment at the interface, several different topographies are observed at the air/liquid crystal interface. We will discuss the surface structures discovered so far in the B4, B7 and DC phases and show how they help us to understand the microstructure and the self-assembly of the liquid crystal phases of bent-core molecules.     

Phase stabilisation of blue-phase liquid crystals using a polymerisable chiral additive

We report a novel polymer stabilisation of blue phase by a chiral agent itself without additional reactive monomers. In this way, the structural difference in phase stabilisation gives rise to novel electro-optic properties such as the hysteresis-free with low-operating voltages. The number of constituents in polymer-stabilised blue-phase mixture is reduced and the polymer network more directly engages the structure of the blue phase, so that the hysteresis is free with less contamination for liquid crystals to be rearranged by electric fields. Also, relatively low operating voltage is achieved because the chiral pitch becomes longer owing to the chiral agent becoming polymerised. This result would open up an innovative way from a material perspective on stabilisation of blue-phase liquid crystals.     

Molecular dynamics simulation of the water|nitrobenzene interface

The structure and dynamics of the neat water|nitrobenzene liquid|liquid interface are studied at 300 K using molecular dynamics computer simulations. The water is modeled using the flexible SPC potential, and the nitrobenzene is modeled using an empirically determined nitrobenzene potential energy function. Although nitrobenzene is a polar liquid with a large dielectric constant, the structure of the interface is similar to other water|non-polar organic liquid interfaces. Among the main structural features we describe are an enhancement of interfacial water hydrogen bonds, the specific orientation of water dipoles and nitrobenzene molecules, and a rough surface that is locally sharp. Surface roughness is also characterized dynamically. The dynamics of molecular reorientation are shown to be only mildly modified at the interface. The effect due to the polarizable many-body potential energy functions of both liquids is investigated and is found to affect only mildly the above results.     

Laser-induced breakdown spectroscopy at a water/gas interface: A study of bath gas-dependent molecular species

Single-pulse laser-induced breakdown spectroscopy has been performed on the surface of a bulk water sample in an air, argon, and nitrogen gas environment to investigate emissions from hydrogen-containing molecules. A microplasma was formed at the gas/liquid interface by focusing a Nd:YAG laser beam operating at 1064 nm onto the surface of an ultra-pure water sample. A broadband Echelle spectrometer with a time-gated intensified charge-coupled device was used to analyze the plasma at various delay times (1.0–40.0 μs) and for incident laser pulse energies ranging from 20–200 mJ. In this configuration, the dominant atomic spectral features at short delay times are the hydrogen H-alpha and H-beta emission lines at 656 and 486 nm, respectively, as well as emissions from atomic oxygen liberated from the water and air and nitrogen emission lines from the air bath gas. For delay times exceeding approximately 8 μs the emission from molecular species (particularly OH and NH) created after the ablation process dominates the spectrum. Molecular emissions are found to be much less sensitive to variations in pulse energy and exhibit a temporal decay an order of magnitude slower than the atomic emission. The dependence of both atomic hydrogen and OH emission on the bath gas above the surface of the water was studied by performing the experiment at standard pressure in an atmospheric purge box. Electron densities calculated from the Stark broadening of the H-beta and H-gamma lines and plasma excitation temperatures calculated from the ratio of H-beta to H-gamma emission were measured for ablation in the three bath gases.     

Phase behavior of bile acid/lipid/water systems containing model dietary lipids

Dietary lipids are solubilized in bile acid micelles in the small intestine. In the present study, we investigate the phase behavior of bile acid/model rapeseed oil (or model beef tallow)/water systems to predict interfacial phenomena during consumption of a variety of foods. The structures of molecular assemblies are identified based on polarizing microscope images, wide-angle X-ray diffraction (WAXD) and small-angle X-ray scattering (SAXS). The results of in vitro tests suggest that an increase in the intake of model rapeseed oil causes the formation of multi-lamellar vesicles and lamellar liquid crystals. The molecules in the lamellar liquid crystal are formed highly ordered layer structure with the spacing of 8.8 nm along the c-axis, while monoclinic packed structure is constructed as two-dimensional structure in ab-plane due to bulky molecular structures of bile acid and unsaturated fatty acid. When the model beef tallow composition in the model system is more than several wt.%, stearic acid crystals are extracted. Moreover, bicarbonate ions are important ingredients to solubilize >10 wt.% of the model lipids. These phase transitions might be induced by the addition of dietary lipids in vivo during the consumption of oil or meat. Our findings are significant for understanding the lipid absorption process in the small intestine, and for developing medical and healthcare products.     

Phase morphology and molecular dynamics of a polyurethane ionomer reinforced with a liquid crystalline filler

Solution-blended binary composites of ionic segmented polyurethane (SPU-I) and liquid crystalline oligomer (LCO) were characterized by wide-angle (WAXS) and small-angle (SAXS) X-ray scattering, differential scanning calorimetry (DSC), thermally stimulated depolarization currents (TSDC) and dielectric relaxation spectroscopy (DRS).Both components mutually influenced their states of aggregation in blends (most significantly, promoting smearing-out of interfaces between stiff and soft chain fragments of SPU-I into broad interfacial regions of intermediate composition). Apparently, the blend with w=0.10 happened to be most favorable for crystallization of the LCO, while the degree of microphase separation for SPU-I became lower and the distribution of stiff domains by sizes became broader, the higher the LCO content. The overall molecular mobility of SPU-I in blends was significantly reduced. This reduction included the intensity of the secondary and the primary relaxations, and of the interfacial Maxwell-Wagner-Sillars (MWS) relaxation, whereas the transition temperatures remained essentially composition-invariant. The Arrhenius-like behavior for the dc conductivity concomitant to the non-Arrhenius (i.e., Vogel-Tammann-Fulcher) frequency dependence for the α relaxation in blends suggested a decoupling of conductivity from the motion of the SPU-I soft chain segments.     

微乳胶粒的形成与表面活性剂的作用——粗粒化力场分子动力学模拟研究

从微观机理上研究表面活性剂对微乳胶粒形成的影响有利于推动微乳状液在各个领域的应用研究．本文采用分子动力学模拟方法研究了微乳胶粒的形成过程及表面活性剂对微乳胶粒形成的影响．正十二烷（C12H26）和十二烷基硫酸钠（SDS）作为油分子和表面活性剂分子的模型,Martini粗粒化（coarse．grained,CG）力场描述分子间和分子内的相互作用,对含有不同浓度的正十二烷和表面活性剂的12个模型分别进行了100ns的分子动力学模拟．模拟结果显示,不含表面活性剂的体系迅速发生水油相分离,且分离过程伴随着势能的明显下降;含有表面活性剂的体系中,在相同时间内通过模拟得到了稳定的、表面活性剂分子包裹油分子的胶粒．对不同温度下模拟得到的数据分析发现,胶粒形成初期的动力学特征可以近似地表达为二级反应,聚集活化能为14．6kJ／mol．     

Gemini surfactants at the air/water interface: a fully atomistic molecular dynamics study

Gemini surfactants typically consist of two single-chain surfactants chemically linked by a spacer molecule. We report herein the results of fully atomistic molecular dynamics (MD) simulations of a series of Gemini surfactants: CsH2s-alpha,omega-bis(C12H25N+(CH3)2Cl-), at the air/water interface with s = 3, 4, 6, 12, 14, and 16, at values of the initial surface area per surfactant AS = 70 A2, 77 A2, 95 A2, 151 A2, 133 A2, and 103 A2, respectively. The AS values employed were obtained from surface tension and neutron reflection experiments at the respective cmc of each surfactant. The Gemini surfactant corresponding to s = 3 was also simulated at AS = 105 A2, which is the experimentally derived value of surface area per surfactant at 1/10th of cmc. Only the surfactants with s = 12 and 14 and the surfactant with s = 3 at AS = 105 A2 gave a stable monolayer at the air/water interface. In other cases, we observe movement of some surfactant molecules from the air/water interface into the aqueous phase, resulting in a stable primary monolayer of surfactants at the air/water interface and a small concentration of surfactant molecules below it. The latter form aggregates, with their hydrophobic chains in the core. The density profiles along the normal to the interface are compared with the ones obtained from neutron reflection experiments. The MD simulations confirm the bending of the spacer toward the hydrophobic chains as the spacer length is increased and the spacer becomes more hydrophobic. The simulations have helped to shed light on the low-resolution picture which emerges from experimental analyses.     

Interfacial behaviors of PMMA-PEO block copolymers at the air/water interface

Amphiphilic block copolymers are attracting con-siderable attention because they exhibit unique self- assembly properties in selective organic solvents[1―4]. Semicrystalline poly(ethylene oxide) (PEO), having many interesting physicochemical properties s…     

Evaluation of phase state and rotational viscosity of fast response liquid crystals using a fully atomistic molecular dynamics

Rational design of liquid crystals (LCs) with excellent phase state and rotational viscosity has been a crucial technique for response speed improvement of LC wavefront corrector. A complete process for theoretically evaluating the phase state and rotational viscosity of fast response LCs using a fully atomistic molecular dynamics is reported. Predicted trends in molecular order, phase-transition temperature between metastable states and rotational viscosity show excellent agreement with experimental results. We also demonstrate that overestimation of the attraction both between and within molecules in the general Amber force field mainly leads to a systematic shift in the phase-transition temperature, rotational viscosity and figure-of-merit for fast response LCs. With further optimisations of intermolecular potential, simulation procedure and data processing, this fully atomistic simulation will be a useful evaluation method of response performance of LC materials.     

Separation of amino acids in glucose isomerase crystal: Insight from molecular dynamics simulations

The separation of amino acids (Arg, Phe and Trp) in a liquid chromatography is investigated using molecular dynamics simulations. A bioorganic nanoporous material – glucose isomerase crystal – is used as the stationary phase and water as the mobile phase. The transport velocities of amino acids decrease in the order Arg > Phe > Trp, consistent with experimental measurement. The elution order is not affected by the solute concentration or by the flowing rate of mobile phase. Arg is highly hydrophilic and charged, interacts with water the most strongly, and thus moves with flowing water the fastest. Trp has the largest van der Waals volume and encounters the largest steric hindrance, leading to the slowest velocity. From the number distributions of amino acids around protein surface, Trp and Phe are found to stay closer to protein than Arg. The solvent-accessible surface areas of amino acids and the numbers of hydrogen bonds between amino acids and water further elucidate the observed velocity difference. The simulation results provide useful microscopic insight into the retention mechanisms in chromatographic separation process and suggest that glucose isomerase crystal has the capability to separate amino acids.     

Phase behavior, conformations, thermodynamic properties, and molecular motion of multicomponent paraffin waxes: A Raman spectroscopy study

Variable-temperature (72–20 °C) studies of Raman spectra (3100–800 cm⁻¹) and thermal analysis of multicomponent paraffin wax have been carried out. The disorder–order transition under liquid–solid transition was observed and their temperature ranges were obtained through the S_lateral order parameter as a function of temperature. From 56 to 43 °C, the paraffin undergoes a conformational state transition of non-extended chain state (NECS) to extended chain state (ECS). The enthalpy and entropy change for the transition obtained by van’t Hoff analysis were 214.286 ± 21 kJ/mol and 0.661 ± 0.066 kJ/mol/K, respectively. The enthalpy determined by differential scanning calorimetry (DSC) was 52.165 ± 5.2 kJ/mol, which is smaller than the van’t Hoff enthalpy due to larger effective non-extended chain state. The variation of Raman spectra with decreasing temperature presents the structure evolution and molecular motion during the crystallization of paraffin wax.     

Equations of states for an ionic liquid under high pressure: A molecular dynamics simulation study

The high-pressure dependence of density given by empirical equation of states (EoS) for the ionic liquid 1-butyl-3-methylimidazolium trifluoromethanesulfonate (or triflate), [C₄C₁im][TfO], is compared with results obtained by molecular dynamics (MD) simulations. Two EoS proposed for [C₄C₁im][TfO] in the pressure range of tens of MPa, which give very different densities when extrapolated to pressures beyond the original experiments, are compared with a group contribution model (GCM). The MD simulations provide support that one of the empirical EoS and the GCM is valid in the pressure range of hundreds of MPa. As an alternative to these EoS that are based on modified Tait equations, it is shown that a perturbed hard-sphere EoS based on the Carnahan–Starling–van der Waals equation also fits the densities calculated by MD simulations of [C₄C₁im][TfO] up to ∼1.0 GPa.     

Molecular theory on dielectric constant at interfaces: a molecular dynamics study of the water/vapor interface

Though the local dielectric constant at interfaces is an important phenomenological parameter in the analysis of surface spectroscopy, its microscopic definition has been uncertain. Here, we present a full molecular theory on the local field at interfaces with the help of molecular dynamics simulation, and thereby provide microscopic basis for the local dielectric constant so as to be consistent to the phenomenological three-layer model of interface systems. To demonstrate its performance, we applied the theory to the water/vapor interface, and obtained the local field properties near the interface where the simple dielectric model breaks down. Some computational issues pertinent to Ewald calculations of the dielectric properties are also discussed.