Preparation and characterization of thermoresponsive hyperbranched polyethylenimine with plenty of reactive primary amine groups

Certain amount of primary amine （NH2） groups of hyperbranched polyethylenimine （HPEI） was first protected by Boc groups. Subsequently, the residual reactive amine groups were reacted with isobutyric anhydride to introduce isobutyramide （IBAm） groups to HPEI. Finally, Boc groups were deprotected to result in HPEI-IBAm-NH2 with 18% of primary amine terminals on the periphery and 80% of IBAm terminal groups （abbreviated as HPEI-IBAm0.80-NH2）. 1H-NMR characterization proved the successful preparation of the product in each step. Compared with its spatial isomer HPEI- IBAm0.8o without primary amine groups, IH-NMR spectra verified that more IBAm groups were located in the interior of HPEI-IBAm0.80-NH2. The further modification of HPEI-IBAmo.so-NH2 and HPEI-IBAmo.8o with p-nitrobenzaldehyde demonstrated that HPEI-IBAm0.so-NH2 was more reactive than HPEI-IBAm0.80 due to its possession of primary amines. Turbidimetry measurements showed that HPEI-IBAm0.80-NH2 was thermoresponsive in water. In the pH range of 9.5-10 its cloud point temperature （Top） was constant, and it increased obviously upon decreasing the pH below 9.5. The thermoresponsive HPEI-IBAmo.8 exhibited the similar trend, but the pH threshold to achieve the constant Top was around 8.5. Moreover, HPEI-IBAm0.8-NH2 showed higher Top and broader phase transition than HPEI-IBAm0.8. The mechanism leading to the different thermoresponsive properties between HPEI-IBAm0.8-NH2 and its spatial isomer HPEI-IBAm0.8 was discussed.     

Specific thermoresponsive behaviours exhibited by optically active and inactive phenylalanine modified hyperbranched polyethylenimines in water

Optically active and inactive hyperbranched polymers with specific thermoresponsive behaviours in water were reported.Through two steps hyperbranched polyethylenimine (HPEI) polymers terminated with different amount of D-phenylalanine (D-Phe),L-phenylalanine (L-Phe) or DL-phenylalanine (DL-Phe) were prepared and characterized.The analyses on the solution properties by turbidimetry,dynamic light scattering,fluorescence probe and 1H-NMR demonstrated that all the polymers exhibited specific thermoresponsive behaviours in water,including:(1) In the dilute polymer concentration region,increasing the polymer concentration led to the increase of phase transition temperature;(2) The optically inactive thermoresponsive hyperbranched polymers showed a higher cloud-point temperature (Tcp) than their corresponding optically active ones in a relatively higher polymer concentration;(3) At the same polymer concentration the hydrophobic groups of the optically inactive HPEI-DL-Phe formed more perfect hydrophobic domain than those of the optically active HPEI-L-Phe and HPEI-D-Phe.     

Influence of sodium dodecyl sulfate on the phase transition of thermoresponsive hyperbranched polymer in water

The influence of sodium dodecyl sulfate(SDS) on the cloud point temperature(Tcp) of the aqueous solution of thermoresponsive hyperbranched polyethylenimine derivative HPEI-IBAm was studied systematically. When p H was below 8.5, HPEI-IBAm was positively-charged. Initially, the Tcp of HPEI-IBAm decreased significantly, followed by an obvious increase with the increase of SDS concentration. The lower the p H was, the higher the SDS concentration was required to achieve the minimum Tcp. When p H was above 8.5, HPEI-IBAm was neutral and raising the SDS concentration led to the gradual increase of Tcp. Compared to linear poly(N-isopropyl acrylamide)(PNIPAm), the Tcp of the current hyperbranched HPEI-IBAm was more sensitive to SDS. The thermoresponsive HPEI-IBAm/SDS complex was used as host to accommodate the non-polar pyrene in water. The lowest SDS concentration for effectively enhancing the solubility of pyrene in water was around 6.4 mmol·L~(-1). When HPEI-IBAm was present, the SDS concentration threshhold was decreased to about 0.31 mmol·L~(-1). Fluorescence technique with pyrene as the hydrophobic probe demonstrated that the SDS concentration of 7.2 mmol·L~(-1) was required to form the hydrophobic domain to accommodate pyrene guests without HPEI-IBAm, while only 0.2 mmol·L~(-1) of SDS was required in the presence of HPEI-IBAm.     

Synthesis, characterization and mechanical properties of polyester-based aliphatic polyurethane elastomers containing hyperbranched polyester segments

Aliphatic polyester-based polyurethane (PU) elastomers with hyperbranched polyester segments were synthesized from polyester diol, hydroxyl-terminated hyperbranched polyester (HB-20), isophorone diisocyanate (PDI) and 1,4-butanediol. The crosslinking density of the PU elastomer was calculated by using Flory-Rehner equation. The degree of hydrogen bonding, the microstructure and the morphologies of these PU materials were characterized by means of FT-IR, WAXD and DSC, respectively. The experimental results showed that the PU elastomers containing small amount of HB-20 exhibited the enhanced hydrogen bonding and mechanical properties. As compared with the comparable PU specimen, the tensile strength of the polyester-based aliphatic PU containing 6 wt% HB-20 increased by 71.2 times, up to 36.1 MPa, and the elongation at break was still as high as 333.1%, resulting from the dual effects of the hydrogen bonding and the crosslinking density in the PU system.     

Investigation of thermodynamic properties of hyperbranched aliphatic polyesters by inverse gas chromatography

Thermodynamic properties of a series of commercial hyperbranched aliphatic polyesters (Boltorn^® H20, H30 and H40) were examined for the first time by inverse gas chromatography (IGC) using 13 different solvents at infinite dilution as probes. Retention data of probes were utilized for an extensive characterization of polymers, which includes the determination of the Flory–Huggins interaction parameter, the weight fraction activity coefficient as well as the total and partial solubility parameters. Analysis of the results indicated that the total and partial solubility parameters decrease with increase of temperature. Furthermore, upon increase of the molecular weight, while the hydrogen bonding component decreases, no influence on the total solubility parameter is noticed within the experimental error margins. Results from the present study while providing new insight to the thermodynamic characteristics of the examined systems, they are also expected to reflect more general aspects of the behavior of hyperbranched polymers bearing similar end-groups.     

Spectral insights into microdynamics of thermoresponsive polymers from the perspective of two-dimensional correlation spectroscopy

Generalized two-dimensional correlation spectroscopy (2DCOS) and its derivate technique,perturbation correlation moving window (PCMW),have found great potential in studying a series of physico-chemical phenomena in stimuli-responsive polymeric systems.By spreading peaks along a second dimension,2DCOS can significantly enhance spectral resolution and discern the sequence of group dynamics applicable to various external perturbation-induced spectroscopic changes,especially in infrared (IR),near-infrared (NIR) and Raman spectroscopy.On the basis of 2DCOS synchronous power spectra changing,PCMW proves to be a powerful tool to monitor complicated spectral variations and to find transition points and ranges.This article reviews the recent work of our research group in the application of 2DCOS and PCMW in thermoresponsive polymers,mainly focused on liquid crystalline polymers and lower critical solution temperature (LCST)-type polymers.Details of group motions and chain conformational changes upon temperature perturbation can thus be elucidated at the molecular level,which contribute to the understanding of their phase transition nature.     

Pervaporation properties of EC membranes modified by aliphatic hyperbranched polyester

Pervaporation membranes containing hyperbranched polymer were prepared from the blends of ethyl cellulose (EC) and hyperbranched polyester (HBPE). The FT-IR analysis indicated that the interactions between EC and HBPE decreased as increasing the generation of HBPE. The membrane containing HBPE (EC-HBPE) showed both higher sorption ratio and selectivity than pure EC membrane. The effects of HBPE content as well as temperature of feed solutions on the membrane performance were investigated in detail. The EC-HBPE membrane exhibited much higher permeate flux than the EC membrane, while the separation factor maintained at same level.     

Synthesis and properties of UV curable waterborne hyperbranched aliphatic polyester

The UV curable waterborne hyperbranched polyester (WBHP) consisting of a multi-hydroxy functional aliphatic polyester core, which is endcapped with methacrylic and salt-like groups in different ratios was synthesized. The core is second generation of hyperbranched aliphatic polyester Boltorn™ H20 with approximately 16 hydroxyl groups. The effects of different ratios of chemical structure of end groups were studied by evaluating various properties of WBHP such as solubility in water, dynamic viscosity, UV curing rate and final unsaturation conversion. A natural good control over the solubility of the samples was possible by salt-like functionality and raising the temperature. The investigation of solubility characteristics of the modified hyperbranched polyester illustrated that those with higher concentration of salt-like moiety were more soluble while those of having lower salt-like moiety were less soluble. The viscosity of the resin WBHP was reduced rapidly by dilution with water and raising temperature. Water showed a favorable viscosity reduction effect as compared to monomer and its blend with water. The polymerization rate of the resins under UV irradiation in the presence of a photoinitiator showed an increasing trend with higher concentration of methacrylate functionality.     

A novel procedure able to predict the rheological behavior of trifunctional epoxy resin/hyperbranched aliphatic polyester mixtures

A hyperbranched polymer (HBP), based on a highly branched polyester, was added to a trifunctional triglycidyl-p-aminophenol (TGAP) epoxy resin as a possible route to increase the toughness of the resin. Different amounts of the HBP, up to 26.5% wt. of resin, were dispersed in the TGAP resin. The rheological behavior of the formulations produced was studied as function of the shear rate and the filler content using a cone and plate rheometer. The rheological behavior of the TGAP resin, initially Newtonian, was modified displaying a pseudo-plastic trend when the hyperbranched polymer was added. An increase in the viscosity of the resin was observed with increasing volume fraction of the filler. The Cross equation was used to predict the viscosity of each formulation as a function of the shear rate. A novel procedure was developed to predict the viscosity of each mixture as a function of the filler volume fraction. This could be employed to provide quantitative information on the filler volume fraction in epoxy/HBP systems, necessary to achieve the characteristic viscosity values corresponding to the typical shear rates for a specific processing technology.     

New type of nanofiltration membrane based on crosslinked hyperbranched polymers

Novel nanofiltration (NF) membrane was developed from hydroxyl-ended hyperbranched polyester (HPE) and trimesoyl chloride (TMC) by in situ interfacial polymerization process using ultrafiltration polysulfone membrane as porous support. Fourier transform infrared spectroscopy (FTIR-ATR), scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray photoelectron spectroscopy (XPS) and water contact angle (CA) measurements were employed to characterize the resulting membranes. The results indicated that the crosslinked hyperbranched polyester produced a uniform, ultra-thin active layer atop polysulfone (PSf) membrane support. FTIR-ATR spectra indicated that TMC reacted sufficiently with HPE. Water permeability and salts rejection of the prepared NF membrane were measured under low trans-membrane pressures. The resulting NF membranes exhibited significantly enhanced water permeability while maintaining high rejection of salts. The salts rejection increase was accompanied with the flux decrease when TMC dosage was increased. The flux and rejection of NF 1 for Na₂SO₄ (1 g/L) reached to 79.1 l/m² h and 85.4% under 0.3 MPa. The results encourage further exploration of NF membrane preparation using hyperbranched polymers (HBPs) as the selective ultra-thin layer.     

Synthesis of well-defined hyperbranched polymers bio-based on multifunctional phenolic acids and their structure-thermal property relationships

A number of multifunctional ABx-type monomers exist in plant metabolites, and studies on the formation of hyperbranching polymers from ABx-type monomers are very significant in the development of bio-related polymeric materials. We established a method for the preparation of well-defined structures in bio-based, hyperbranched (HB) polyarylates by the copolycondensation of caffeic acid (DHCA) as an AB₂-monomer and p-coumaric acid (4HCA) as an AB-monomer, using the highly efficient catalyst Na₂HPO₄ to regulate the polymerization speed. ¹H NMR analysis revealed the time course of the formation of the hyperbranching structures. which strongly affected the glass transition and degradation temperatures, as well as the molecular weight and composition.     

Investigation of thermodynamic properties of hyperbranched poly(ester amide) by inverse gas chromatography

Thermodynamic properties of the hyperbranched poly (ester amide) (Hybrane® 1200) were investigated by inverse gas chromatography (IGC) using 19 different solvents as the probes at infinite dilution. Retention data of probes were used for an extensive characterization of the polymer, which includes the determination of the Flory‐Huggins interaction parameter, the weight fraction activity coefficient, the total, partial, and additive solubility parameters. The analysis of the results indicated that the additive value of the solubility parameter is lower than the value obtained from a standard procedure. Furthermore, the solubility parameter decreases with increase of temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2166–2172, 2008     

One‐pot synthesis of soluble and fluorescent aliphatic hyperbranched poly(amide‐imide) with solvent‐dependent emission

Aliphatic hyperbranched poly(amide‐imide) was facilely prepared by employing a functional thiolactone‐maleimide monomer. Highly efficient, selective and quantitative properties of amine‐maleimide Michael addition and aminolysis of a thiolactone guaranteed the generation of an ABB' thiol‐yne intermediate without side products, followed by consecutive thiol‐yne click reaction in one‐pot. The hyperbranched structure of the poly(amide‐imide) was confirmed by NMR spectroscopy and triple‐detector GPC/SEC analysis. Additionally, due to the presence of aminosuccinimide fluorophores and intrinsic physical property of hyperbranched polymers, this aliphatic hyperbranched poly(amide‐imide) possessed solvent‐dependent emission and presented good solubility in various organic solvents. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 2053–2060     

Effect of branching architecture on glass transition behavior of hyperbranched copolystyrenes: the experiment and simulation studies

By controlling the feed ratio of CMS/styrene and the polymerization time, a series of hyperbranched copolystyrenes(HBCPS) were synthesized with comparable weight-averaged molecular weights(Mw) but different degree of branching(DB) through atom transfer radical self-condensing vinyl copolymerization(ATR-SCVCP) with Cu Br/2,2?-bipyridyl as the catalyst. The resulting HBCPS samples were used to investigate the effect of branching architecture on their glass transition behavior. With the DB increased, the glass transition temperatures(Tg) of HBCPS samples measured by DMA and DSC both decreased. Their spin-lattice relaxation times(1H T1r) of protons displayed the same downtrend with increasing DB. Besides, a correlation between the Tgs and the DB was well established by all-atom molecular dynamics(MD) simulations. The values of MD-determined Tgs are little higher than the corresponding experimental ones. However, the dependence of Tgs on DB is in good agreement with the experimental results, i.e., Tg decreases both in experiments and simulations with increasing DB.     

Degree of branching of the hyperbranched polymers resulted from ab<Subscript>2</Subscript> polycondensation with substitution effect

The analytical expressions of the various structural units and the average degree of branching for the hyperbranched polymers resulted from AB₂ polycondensation with substitution effect were derived by the kinetic mechanism.The reactivity difference between the B group in linear unit and that in terminal group has great effect on the molecular parameters of the products obtained.The concentration of terminal units has a maximum with the increase of the conversion of A groups（x）.The higher the reactivity ratio（r） of linear B group to branched one is,the later the maximum appears and the larger it is.The degree of branching of the hyperbranched polymers obtained is controllable by adjusting the parameters of r and x,which increases with increasing both x and r.     

Influences of hyperbranched polyethylenimine on the reactive compatibilization of polycarbonate/polyamide blends

The influences of hyperbranched polyethylenimine(h PEI), which possesses many reactive amino end-groups, on the blending properties of bisphenol-A polycarbonate(PC) and amorphous polyamide(a PA) were systematically investigated. Scanning electron microscopy(SEM) and differential scanning calorimetry(DSC) were used to observe the effect of h PEI on morphologies of PC and a PA phases in bulk blends. While the interfacial fracture toughness between planar PC and a PA layers with and without h PEI was studied by using augmented double cantilever beam(ADCB) method. Results show that the compatibility in PC/a PA blends can be significantly improved by adding a small amount of h PEI, mainly due to the interchange reactions between the polymers leading to the formation of block copolymers, cross-linked polymers and molecules with other constitutions. The augmented double cantilever beam experiments showed that the reactive process drastically reinforced the interfacial adhesion between planar layers of PC and a PA. However, degradation takes place during annealing at 180 °C, which was responsible for the production of small molar mass species of PC.     

The effect of amide solvent structure on the direct arylation polymerization (DArP) of 2‐Bromo‐3‐hexylthiophene

In this work, we investigate the influence of the amide solvent chemical structure on the properties of poly(3‐hexylthiophene) (P3HT) prepared via direct arylation polymerization (DArP). Our findings indicate that for successful polymerization the amide must possess an acyclic aliphatic structure since cyclization of an amide results in a complete shutdown of DArP reactivity as evidenced by failed polymerization in N‐methylpyrrolidone, whereas the presence of an aromatic motif renders the amide solvent susceptible to C? H activation and leads to incorporation of the solvent structure into the P3HT backbone, as demonstrated on the example of N,N‐diethylbenzamide. Additionally, we observed that the steric bulk of alkyl substituents on both the nitrogen atom and the carbonyl group within the amide structure has to be delicately balanced for optimal DArP reactivity. In the optimal cases, P3HT is obtained in high yield, with high molecular weight and contains a minimal amount of structural defects. The obtained polymer samples were comprehensively studied in terms of their chemical structure, optical, thermal and solid‐state properties in thin films using GPC analysis, ¹H NMR, MALDI, UV–vis, GIXRD spectroscopy, and DSC. We additionally note a drastic difference of the amide solvent effect between DArP and Stille polymerization. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 2494–2500     

Tuning the optical properties of hyperbranched polymers through the modification of the end groups

Dye‐capped, hyperbranched, conjugated polymers were prepared by the modification of the peripheral bromo end groups of the hyperbranched polymer core with a palladium‐catalyzed Suzuki–Miyaura cross‐coupling reaction. The dye‐modified, hyperbranched polymers had high molecular weights and displayed good solubility in common organic solvents such as tetrahydrofuran, toluene, and chloroform. The structure of the dye‐modified, hyperbranched polymers was characterized by ¹H and ¹³C NMR and elemental analysis. The thermal properties of five kinds of hyperbranched polymers were investigated with thermogravimetric analysis and differential scanning calorimetry. The optical properties of the dye‐capped, hyperbranched polymers were investigated with ultraviolet‐absorption and fluorescence spectroscopy. The hyperbranched structure could effectively reduce the aggregation of the peripheral dyes. The emission colors of the hyperbranched polymers could be easily tuned by end‐group modification. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 111–124, 2007     

Investigation on properties of aqueous foams stabilized by aliphatic alcohols and polypropylene glycol

Foams stabilized by nonionic surfactants are usually moderately stable due to high drainage rate and intense bubble coalescence and coarsening. This study aimed to investigate comparatively the foam properties of aliphatic alcohols (methyl isobutyl carbinol (MIBC) and 2-octanol) and polypropylene glycol (PPG400). Experiments were conducted using the FoamScan method at various surfactant concentrations and gas flow rates where the foam volume, liquid content of foam and foam half-life were determined. The results showed that both foamability and foam stability of surfactant solution increased with increasing gas flow rate and surfactant concentration for all tested surfactants. PPG400 was an unusually strong surfactant having the largest surface activity compared with MIBC and 2-octanol, which exhibited the maximum foaming performance and foam stability at all tested gas flow rates and concentrations. The present study suggested that foam properties depended primarily on the type of surfactant and its concentration and secondarily on the gas flow rate. In addition, properties of interface are closely related to that of foam, which is a significant point if one wants to produce foams for specific applications.     

A versatile approach for the syntheses of poly(ester amide)s with pendant functional groups

Poly(ester amide)s (PEAs) are emerging as promising materials for a wide range of biomedical applications due to their potential for both hydrolytic and enzymatic degradation, as well as the ease with which their properties can be tuned by the choice of monomers. The incorporation of pendant functional handles along the PEA backbone has the potential to further expand their applications by allowing the charge and hydrophilicity of the polymers to be altered, and facilitating the conjugation of active molecules such as drugs, targeting groups, and cell signaling molecules. Described here is a simple and versatile strategy based on orthogonal protecting groups, by which L ‐lysine and L‐ aspartic acid can be incorporated into several families of PEAs based on monomers including the diacids succinic and terephthalic acid, the diols 1,4‐butanediol and 1,8‐octanediol, and the amino acids L‐ alanine and L‐ phenylalanine. All polymers were thoroughly characterized by nuclear magnetic resonance spectroscopy, infrared spectroscopy, size exclusion chromatography, thermogravimetric analysis, and differential scanning calorimetry. It was demonstrated that the side chain protecting groups could be readily removed, allowing the pendant amines or carboxylic acids to be functionalized. In particular, the carboxylic acid groups on a polymer containing L‐ aspartic acid units were converted to N‐hydroxysuccinimidyl esters, providing a useful template for further derivatization. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 3757–3772, 2009