Studies on antimony oxides: Part I

Thermogravimetry (TG), differential thermal analysis (DTA) and X-ray diffraction studies of antimony(III) oxide, (Sb₂O₃), in air, nitrogen and argon atmospheres have been made. In air Sb₂O₃ becomes oxidized to Sb₂O₄ above 510°. The oxidation reaction proceeds in two stages as revealed by the TG and DTA curves. The behaviour of Sb₂O₃ is similar in both N₂ and Ar. Sb₂O₃ remains unaffected up to 430°, above which there is a slow, and continuous mass loss up to 550°. Above 550° Sb₂O₃ volatilizes resulting in an enormous weight loss. X-ray studies of the sublimate and the residue indicate the former to be the cubic form of Sb₂O₃ (Senarmontite) while the residue is the orthorhombic (Valentinite) structure. From the DTA curves in air, N₂ and Ar, the transition temperature for the cubic to the orthorhombic modification has been estimated to be around 610°.     

Lattice vibrations of manganese oxides. Part I. Periodic structures

Raman scattering (RS) and Fourier transform-infrared (FT-IR) spectroscopy have been applied to the structural characterisation of manganese dioxides (MDOs). A variety of synthetic battery-grade MDOs are investigated for comparison to the natural phases. The RS and FT-IR spectra are analysed on the basis of the local environment in the MDO structures considering the vibrations of the MnO6 octahedral building the lattices. The vibrational modes of the MnO6 units expand over 400-650 cm(-l) with additional bands in the low-wavelength region. Structural trends are deduced from the comparison of the vibrational spectra of the MDO phases investigated: birnessite, bixbyite, coronadite, groutite, hausmannite, hollandite, manganosite, pyrolusite, ramsdellite, romanechite, spinel, and todorokite.     

Alkaline steeping of dissolving pulp. Part I: cellulose degradation kinetics

The production of cellulosic man made fibres by the viscose process has been known for more than 120 years now, but still some aspects are not sufficiently understood in detail. The carbohydrates in the pulp are exposed to varying conditions during the manufacturing process. In the first production step of steeping, the strong alkaline treatment leads to undesirable loss reactions of the cellulose. In this study, a comprehensive kinetic model was developed for process simulation of cellulose degradation for the fist time comprising primary and secondary peeling, stopping and alkaline hydrolysis. A total chlorine free bleached beech sulfite pulp was treated with 18 % sodium hydroxide at 40, 50 and 60 °C for time periods up to 80 h. The corresponding reaction rates, activation energies and frequency factors for all reaction steps were calculated. The peeling-off reaction was of great significance for the cellulose yield loss, due to a contribution of the secondary peeling after random chain scission. The moderate decrease of the intrinsic viscosity and the changes in molar mass distribution indicated the validity of the assumption. Further, a reduction of the carbonyl and an increase of the carboxyl groups in the cellulose were observed due to the formation of the stable metasaccharinic acid at the reducing ends of the molecules. The fibre morphology was investigated by SEM measurements. Already short alkaline treatment times favored the dissolution of fibril fragments from the fibre surface leading to a smooth fibre surface.     

Mesoporous zirconium titanium oxides. Part 1: Porosity modulation and adsorption properties of xerogels

A series of zirconium titanium oxide mesophases containing 33 atom % Zr have been prepared using carboxylic acids of different alkyl chain lengths (Cy ) from y=4-18 through organic-inorganic polymer phase segregation as the gel transition is approached. Thermal treatment of these transparent gels up to 450 degrees C eliminated the organic template, and domain coarsening occurred affording stable worm-hole mesoporous materials of homogeneous composition and pore diameters varying from about 3 to 4 nm in fine increments. With such materials, it was subsequently possible to precisely study the adsorption of vanadium oxo-anions and cations from aqueous solutions and, more particularly, probe the kinetics of intraparticle mass transport as a function of the associated pore dimension. The kinetics of mass transport through the pore systems was investigated using aqueous vanadyl (VO2+) and orthovanadate (VO3(OH)2-) probe species at concentrations ranging from 10 to 200 ppm (0.2 to 4 mmol/L) and pH values of 0 and 10.5, respectively. In the case of both of these vanadium species, the zirconium titanate mesophases displayed relatively slow kinetics, taking in excess of about 500 min to achieve maximum uptake. By using a pseudo-second-order rate law, it was possible to extract the instantaneous and overall rate of the adsorption processes and then relate these to the pore diameters. Both the instantaneous and overall rates of adsorption increased with increasing surface area and pore diameter over the studied pore size range. However, the equilibrium adsorption capacity increased linearly with pore diameter only for the higher concentrations and was independent of pore diameter for the lower concentration. These results have been interpreted using a model in which discrete adsorption occurs at low concentrations and is then followed by multilayer adsorption at higher concentration.     

Non-stoichiometric molybdenum oxides as cathodes for lithium cells: Part I. Primary batteries

Some non-stoichiometric Mo oxides have been tested as cathodes for primary Li cells. Their performance has been evaluated as a function of current density, electrolyte, temperature, cathode porosity and formulation. Specific capacities exceeding 0.4·Ah g^?1 could be reached at low rates. As found with MoO₃, these oxides give rise to the formation of ternary phases of the type Li_myMo_mO_3m?1. Li⁺ insertion in the lattices allows structure retention for Li/Mo ratios lower than 0.7–0.8, whereas higher Li⁺ contents result in the appearance of new phases.     

The thermal degradation kinetics of polypropylene: Part I. Molecular weight distribution

A kinetic model for the thermal degradation of polypropylene was developed and fit to molecular weight distribution data obtained by high-temperature size-exclusion chromatography. In a series of ampoule experiments, reaction temperatures of 275 to 315 °C were examined with reaction times of up to 48 h. A single-parameter version of the model, containing an apparent rate constant, was found to provide excellent fits of all molecular weight distributions. Values of the parameter varied with both temperature and reaction time. The variations with temperature provided Arrhenius plots at each time. A lower-than-expected overall activation energy of 123.8 kJ/mol was attributed to the temperature range examined and the presence of ‘weak links’ due to oxidized moieties in the polymer. The ‘weak links’ were below the detectability limit of Fourier transform infra-red spectroscopy applied to the reacted samples. However, other data on heavily oxidized polypropylene and a recent study using thermal gravimetric analysis¹ where an activation energy of 98.3 kJ/mol was determined for similar temperatures, did provide further support for the hypothesis.     

Electronic structure and properties of the ground state of copper in semiconducting cuprates

The spin-polarized discrete variational X_a method is used to calculate clusters that model the electronic structures of CuO, La₂CuO₄, and Nd₂CuO₄. It, is shown that in each of the compounds the unoccupied portion of the valence band involves mainly the O2p states, the contributions from the Cu3d orbitals being significantly smaller. The effects of the nature of holes in the valence band and of the structure of the close environment of copper on the low-energy CuK spectra and the X-ray photoelectron spectra of the above systems are discussed. Institute of Solid State Chemistry, Ural Branch, Russian Academy of Sciences. Translated fromZhumal Struktumoi Khimii, Vol. 36, No. 4, pp. 636–643, July–August., 1995. Translated by I. Izvekova     

Catalytic properties of iron oxides impregnated with copper acetate

Textural and catalytic properties of iron oxides impregnated with copper acetate were investigated. In order to get satisfactory performance in the high temperature shift reaction, 4 impregnation hours are necessary.     

Voltammetry of copper species in estuarine waters: Part I. Electrochemistry of copper species in chloride media

Theoretical and experimental voltammetric studies of copper reduction in chloride media show that electrodeposition on the hanging mercury drop electrode (HMDE) is controlled by competitive reduction between Cu(II) organic species and the Cu(I)Cl₂^? intermediate. For reversible Cu(II) species reduction, the change from organic ligand to chloride control of the final reduction step can be predicted by thermodynamic calculation. On the other hand in irreversible systems (e.g. estuarine waters) involvement of the CuCl₂^? intermedite in the electrodeposition is more complex and can occur both before and after amalgamation.     

Synthesis, crystal structures and thermal properties of new copper(I)halide 2-ethylpyrazine coordination polymers: the influence of solid-state kinetics on product formation

Three new copper(I) coordination polymers were prepared by the reaction of copper(I) chloride with 2-ethylpyrazine in water at room temperature or under solvothermal conditions. In poly[CuCl(μ₂-2-ethylpyrazine-N,N′)] (I), “zig-zag”-like CuCl chains are present, which are connected by the 2-ethylpyrazine ligand to a three-dimensional network. In comparison in catena[Cu₃Cl₃(μ₂-2-ethylpyrazine-N,N′)₂] (II) six-membered Cu₃Cl₃ rings occur, which are connected to chains by the organic ligands. In poly[Cu₂Cl₂(μ₂-2-ethylpyrazine-N,N′)] (III), CuCl double chains are found, which are linked by the ligands to form sheets. The thermal behaviour of the different compounds was investigated using simultaneous thermogravimetry, differential thermoanalysis and mass spectroscopy as well as temperature-dependent X-ray powder diffraction. Two mass steps are found upon heating compound I in a thermobalance with 1°C/min, where the first corresponds to the transformation into compound III, and the second to the loss of the remaining ligands under formation of CuCl. If the heating rate is increased to 16°C/min, compound II is formed as an intermediate in a consecutive reaction. Therefore, the product formation depends on the actual heating rate, which shows that the solid-state kinetics plays an important role in such thermal reactions.     

Mesoporous zirconium titanium oxides. Part 2: Synthesis, porosity, and adsorption properties of beads

Mesoporous zirconium titanium mixed-oxide beads having disordered wormhole textures and mole fractions of Zr (x) ranging from x=0.25 to 0.67 have been prepared. The bead preparation method combined the forced hydrolysis of mixtures of zirconium-titanium alkoxides in the presence of long-chain carboxylates with external gelation. Uniformly sized beads could be produced in the size range 0.5-1.1 mm by varying the droplet size and viscosity of the mixed-oxide sol, thus making them suitable for large-scale column chromatographic applications. The beads exhibited narrow pore size distributions with similar mean pore diameters of around 3.7 nm. The specific surface areas of the beads were linked to the Zr mole fraction in the precursor solution and were generally greater than 350 m2/g for x=0.5. A combination of scanning transmission electron microscopy and X-ray absorption fine structure analysis indicated that the pore walls of the beads were composed of atomically dispersed Zr and Ti to form a continuous network of Zr-O-Ti bonds. Mass transport in the beads was evaluated by monitoring the kinetics of vanadate and vanadyl adsorption at pH 10.5 and 0.87, respectively.     

ESCA studies of copper oxides and copper molybdates

Valence band, $\text{Cu}\text{2p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}\text{,}\text{O}\text{1s,}\text{Mo}\text{3d}$, and Cu L₃M₄₅M₄₅ photoelectron and X-ray-induced Auger spectra were recorded for metallic copper, Cu₂O, CuO, Cu₂Mo₃O₁₀, Cu₆Mo₄O₁₅, CuMoO₄, Cu₃Mo₂O₉, and Cu_3.85Mo₃O₁₂. $\text{Cu}\text{2p}{}_{\mathrm{<mtext>3</mtext><mtext>2</mtext>}}$ binding energy is 0.9 eV lower for Cu⁺-containing molybdates than for Cu₂O and 0.7 eV higher for Cu²⁺-containing molybdates with respect to that of CuO. Calculation of net chemical shift demonstrates the influence of Madelung potential on the binding energy of core electrons. On the basis of differences in binding energy it was possible to distinguish between various Cu-containing phases and to follow the surface redox processes of copper molybdates which, as it was seen, follow the same reactions as in the bulk processes. Auger spectra suggest the presence of a very thin layer of “surface phase” common for all five studied molybdates and independent of bulk structure and composition.     

Electric and adsorption properties of pharmaceutical polymers. Part I: Electrokinetics of Aquacoat

The characterization of the electrical surface properties of Aquacoat, a polymer latex of great interest in pharmaceutical sciences, is described. The technique used is electrophoresis. Analysis was carried out of the effect of pH, electrolyte and surfactant concentration on the electrophoretic mobility of the latex particles. Increasing the pH of the dispersion medium provokes a monotonous increase in the value of the negative mobility. The electrolytes LiCl, KCl and NaCl give rise to larger mobilities when their concentration in solution is increased up to ca. 10^–3 M, and a similar behavior is found in the presence of Na₂SO₄. The effect of raising the concentration of CaCl₂ is to decrease the absolute value of the mobility as a consequence of double layer compression. Sodium dodecyl sulphate seems to adsorb on the particle surface increasing its negative charge, but when its concentration is close to 10^–3 M saturation of the surface appears to take place, and an approximately constant mobility is suggested by data, whatever the pH of the medium. Finally, the mobility variations with LaCl₃ concentration indicate adsorption of the La³⁺ cation when it is hydrolyzed (pH5), whereas non-hydrolyzed lanthanum has little effect on the particle charge.     

Thermotropic rigid chain copolymers I. crystallization kinetics and thermodynamic properties

The kinetics of structure formation and the thermal properties of the ordered phase were analyzed calorimetrically for a rigid polymer, characterized by an irregular chemical structure. The transition from the nematic melt to a partially ordered state was found to involve two different processes, a fast and a slow one. The fast one corresponds apparently to a thermally activated nucleation and growth mechanism, whereas the slow one is strongly self delaying. Its transition rate is only weakly dependent on the temperature. The thermal properties of the ordered phase, resulting from this process, vary strongly with the annealing temperature and annealing time. The enthalpy and entropy of fusion, characteristic for the pure ordered phase, are lower by a factor of about 10 in comparison to the corresponding values of flexible chain molecules.     

Dendrimers with a copper(I) bis(phenanthroline) core: synthesis, electronic properties, and kinetics

The copper(I) bis(chelate) complex Cu(L(0))(2) has been prepared from 2,9-diphenethyl-1,10-phenanthroline and Cu(CH(3)CN)(4)BF(4). Derivative Cu(L(0))(2) has been characterized by NMR, UV-vis spectroscopy, and X-ray crystallography. Interestingly, owing to the presence of the ethylene linker, the interligand pi-pi stacking interactions between the phenyl rings and the phenanthroline subunits in Cu(L(0))(2) do not induce significant distortions of the pseudotetrahedral symmetry around the Cu(I) center in the solid state or in solution. Following the synthesis of Cu(L(0))(2), dendrimers Cu(L(1)(-)(4))(2) with a Cu(I) bis(2,9-diphenethyl-1,10-phenanthroline) core surrounded by Fréchet type dendritic branches have been prepared and the kinetics of their cyanide-assisted demetalation studied. Importantly, the surrounding dendritic wedges have no significant influence on the coordination geometry of the Cu(I) center, as deduced from their absorption spectra. Therefore, the variations of the rate constants only reflect changes resulting from the presence of the dendritic branches. The kinetics of the cyanide-mediated demetalation reaction indeed revealed that cyanide diffusion through the dendritic shell is slightly influenced by the size of the branches. Significant effects were observed in the kinetics when going from the third to the fourth generation and have been ascribed to changes in the lipophilicity around the metallic core as a result of dendritic encapsulation.     

Physico-chemical aspects of polyethylene processing in an open mixer. Part 32: Formal kinetics of γ-lactone formation from secondary products. Heterogeneous kinetics

Oxidation of aldehydes and γ-hydroxy-trans-vinylene groups can yield γ-lactones. These intermediates account for γ-lactone formation in the advanced stages of polyethylene processing in air. The acyl-peroxy radical formed on free radical induced oxidation of aldehydes can abstract intramolecularly a δ-hydrogen atom to yield a peracid. Reaction of the alkyl radical formed in this reaction with the hydroperoxide group of the peracid gives a γ-lactone with simultaneous release of a hydroxyl radical. The calculated rate of γ-lactone formation according to the mechanism envisaged decreases slightly with increasing temperature (activation energy of about −5 kcal/mol). It is in agreement with the experiments that do not show significant activation energy in the high temperature range for the advanced stages of polyethylene processing. The calculated rate of γ-lactone formation is found to increase by a factor of about 2.7 if the processing experiments are performed in pure oxygen instead of in air. This is close to the experimental factor of about 2.Peroxidation of γ-hydroxy-trans-vinylene groups can also yield γ-lactones. The first possibility involves addition of a peroxy radical to the double bond followed by oxygen addition to the alkyl radical. This reaction possibly yields an α-peroxy-hydroperoxide. Intramolecular decomposition involving the two reactive groups of the α-peroxy-hydroperoxide can give an ozonide that on thermal decomposition yields among others an acid group in 4-position to the alcohol. The activation energy calculated is strongly negative so that the rate should decrease strongly with increasing temperature. Hence, the mechanism cannot contribute significantly to γ-lactone formation in the whole temperature range of the experiments. This is so in spite of the fact that the rate is estimated to increase by a factor of about 1.7 on passing from air to pure oxygen, which is close to the experimental value of approximately 2. The second possibility of transformation of γ-hydroxy-trans-vinylene groups is based on stress-induced oxygen addition to the double bond. Acid catalyzed decomposition of the allylic hydroperoxide that is formed in the reaction yields a pair of aldehydes with one of the aldehyde groups in 4-position to the alcohol group. Peroxidation of the aldehyde pair can give an acid group in 4-position to the hydroxyl group so that a γ-lactone can be formed. The activation energy calculated for the process is very small and the effect of the oxygen concentration corresponds to an increase by a factor of approximately 4.5 on passing from air to pure oxygen. It is postulated that simultaneous contribution by different mechanisms might well account for the experimental value of about 2.The heterogeneous kinetics discussed in detail allows for complementary data interpretation. It is especially suited for the understanding of the advanced stages of polyethylene processing, after some induction time.