The solvent extraction and spectrophotometric determination of vanadium (V) with 4-(2-thiazolylazo)resorcinol and tetrazolium salts

The formation and extraction of ion-associate complexes between the vanadium(V)-4-(2-thiazolylazo)resorcinol (TAR) anionic chelate and the cations of some mono-and ditetrazolium salts {3-(4,5-dimethyl-2-thiazol)-2,5-diphenyl-2H-tetrazolium bromide (Thiazolyl blue, MTT), 3-(2-naphtyl)-2,5-diphenyl-2H-tetrazolium chloride (Tetrazolium violet), 2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride (Iodonitrotetrazolium chloride), 3,3′-[3,3′-dimetoxy(1,1′-biphenyl)-4,4′-diyl]-bis[2,5-diphenyl-2H-tetrazolium] chloride (Tetrazolium blue chloride) and 3,3′-(3,3′-dimetoxy-4,4′-biphenylene)bis[2-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride] (Nitro blue tetrazolium chloride)} have been studied. The optimum extraction conditions have been found. The composition of the V-TAR-monotetrazolium and V-TAR-ditetrazolium complexes extracted into chloroform has been determined to be 1:2:3 and 2:4:3 respectively. The extraction, distribution and association constants, and the recovery factors have been calculated. The relationship between the molecular weight of tetrazolium cations, and the association constants of their complexes has been discussed. The special behavior of the tetrazolium cations, containing-NO₂ groups has been noticed. The effects of foreign ions and reagents on the extraction of vanadium with TAR and the best tetrazolium salt-MTT have been studied. A sensitive, selective, simple and fast method for the determination of vanadium has been developed.      

Extraction-spectrophotometric investigations on two ternary ion-association complexes of gallium(III)

Complex formation and liquid-liquid extraction were studied in systems containing Ga(III), azoderivative of resorcinol {4-(2-pyridylazo)resorcinol (PAR) or 4-(2-thiazolylazo)resorcinol (TAR)}, 2,3,5-triphenyltetrazolium chloride (TTC), water and chloroform. The optimum conditions w.r.t. pH, extraction time, concentration of ADR and concentration of TTC for the extraction of Ga(III) as an ion-associate complex were found.. The composition of the extracted complexes, (TT⁺)[Ga(PAR)₂] (I), (TT⁺)[Ga(TAR)₂] (II) or (TT⁺)₂[Ga(OH)(TAR)₂] (III), and the constants of association (β) between 2,3,5-triphenyltetrazolium cation (TT⁺) with corresponding anionic chelates were established by several methods. The constants of distribution (K_D) and extraction (K_ex) of the principal species I and III were determined as well. The apparent molar absorptivities of the chloroform extract at the optimum extraction-spectrophotometric conditions were ɛ′₅₁₀=9.5×10⁴ L mol⁻¹ cm⁻¹ (I) and ɛ′₅₃₀=4.6×10⁴ L mol⁻¹ cm⁻¹ (III). The validity of Beer’s law was checked and analytical characteristics that were calculated are reported herein.      

Investigation of the extraction equilibrium of ternary ion-association complexes of thallium(III) with monotetrazolium salts triphenyltetrazolium chloride and thizolyl blue

The extraction equilibrium of ternary ion-association complexes obtained during the reaction of tetrachloride complex of thallium(III) and monotetrazolium salts triphenyltetrazolium chloride (TTC) or thiazolyl blue (MTT) has been studied. The optimum conditions that are required to carry out the investigations have been found. As a result of using a developed chemical model, the constants of extraction, distribution and association, the distribution coefficients and the recovery factor of investigated ionassociates have been determined radiochemically.     

Investigations of the use of 4-(5-nonyl)pyridine as a liquid anion exchanger for tetrachloroferrate ions in aqueous chloride media

In an attempt to gain an understanding of factors affecting the extraction of iron(III) by 4-(5-nonyl)pyridine, the equilibria between hydrogen chloride and benzene solutions of 4-(5-nonyl)pyridine have been studied. From acid distribution data and visible absorption spectra of the organic phases, it was concluded that FeCl ₄ ⁻ ion, with a tetrahedral sp³ configuration is the principal iron containing species. The pyridine extraction of macro and trace amounts of the metal has indicated the formation of 1∶1 and 2∶1 complexes respectively. The 2∶1 complexes are assumed to result from association of a 1∶1 complex with a molecule of the pyridine hydrochloride. The salting-out effect increases in the order, LiCl<NaCl<MgCl₂<AlCl₃ and these differences in the effect have been attributed to the different degree of hydration of cations of the salts present and to the ionic radii. The effect of various anions including the reducing agents have been described. Separation factors of several metal ions relative to ferric iron, in 6M HCl, are also reported.     

Some tetrazolium salts and their ion-association complexes with the molybdenum(VI) — 4-nitrocatechol anionic chelate

Several commercially available 2H-tetrazolium salts (TS) {2,3,5-triphenyl-2H-tetrazolium chloride (TTC), 3-(1-naphthyl)-2,5-diphenyl- 2H-tetrazolium chloride (Tetrazolium Violet, TV), 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT), 2-(4-iodophenyl)-3-(4-nitrophenyl)-5-phenyl-2H-tetrazolium chloride (INT) and 3,3′-(3,3′-dimethoxy-4,4′-biphenylene)-bis(2,5-diphenyl- 2H-tetrazolium) chloride (Tetrazolium Blue Chloride, BTC)} and their ion-associated complexes (IAC) with the Mo(VI) — 4-nitrochatechol (4-NC) anionic chelate [MoO₂(4-NC)₂]²⁻ have been investigated by differential thermal analysis (DTA) and thermogravimetric analysis (TG). Some special features of the thermal behavior of the compounds have been discussed. The results show that the thermal stability of IAC depends on the factors determining the values of their association constants β: molecular mass and the presence of nitrophenyl substituent(s) in the tetrazolium ring.     

Studies on the Synthesis and Thermodynamic Stability of Two Multidentate Ligands 2,9-disubstituted 1,10-phenanthroline

Two multidentate ligands: N,N′-di-(propionic acid-2′-yl-)-2,9-di-aminomethylphenanthroline (L₁) and N,N′-di-(3′-methylbutyric acid-2′-yl-)-2,9-di-amino-methylphenanthroline (L₂) were synthesized and fully characterized by ¹H NMR and elemental analysis. The binding ability of L₁ and L₂ to metal ions such as M(II) (M = Cu, Zn, Co and Ni) and Ln(III) (Ln = La, Nd, Sm, Eu, and Gd) has been investigated by potentiometric titration in aqueous solution and 0.1 mol dm⁻³KNO₃ at 25.0 ± °C. In view of the structure of L₁ and L₂, mononuclear metal complexes can be formed in solution. The stability constants of binary complexes of ligands L1 and L2 with metal ions M(II) and Ln(III) have been determined respectively and further discussed.     

Ternary Complexes of La(III), Ce(III), Pr(III) or Er(III) with Adenosine 5′-mono, 5′-di,and 5′-triphosphate as Primary Ligands and some Biologically Important Zwitterionic Buffers as Secondary Ligands

Equilibrium constant measurements have been performed potentiometrically at (25±0.1) °C and an ionic strength I=0.1 mol⋅dm⁻³ KNO₃ for the interaction of La(III), Ce(III), Pr(III) and Er(III) with the purine nucleotides adenosine 5′-mono, 5′-di, and 5′-triphosphate and with the biologically relevant secondary ligand zwitterionic buffers 3-(cyclohexyl amino)-1-propanesulfonic acid (CAPS), 3-(cyclohexylamino)-2-hydroxy-1-propane sulfonic acid (CAPSO), N-tris(hydroxymethyl)methyl-3-aminopropanesulfonic acid (TAPS), 3-[N-bis(hydroxyethyl)amino]-2-hydroxypropanesulfonic acid (DIPSO), N,N-bis(2-hydroxyethyl)glycine (BICINE), and N-(2-acetamido)-2-iminodiacetic acid (ADA) in a 1:1:1 ratio. The formation of various 1:1:1 normal and protonated mixed-ligand complex species was inferred from the potentiometric pH titration curves. The experimental conditions were selected such that self-association of the purine nucleotides and their complexes was negligibly small; that is, the monomeric normal and protonated ternary complexes were studied. Initial estimates of the formation constants of the resulting species and the acid dissociation constants of adenosine 5′-mono-, 5′-di-, and 5′-triphosphate and the zwitterionic buffer secondary ligands were refined with the Superquade computer program. In some Ln(III) mixed-ligand systems, interligand interactions between the coordinating ligands, possibly involving H-bond formation, have been found to be the most important factors in deciding the stability of the mixed-ligand complexes in solutions. The thermodynamic ΔG° values of the monomeric normal and protonated ternary complexes were calculated and discussed.     

Use of complexones for the extraction separation of rare earth and transplutonium elements with amines

The extraction distribution and separation of rare earth elements and americium from the concentrated lithium nitrate solution with solutions of tertiary amines in organic solvents has been studied as a function of the composition and structure of complexones of the polyaminepolyacetic acid series by a radioactive tracer method. It has been found that diethylenetriaminepentaacetic acid is suitable for the separation of REE from americium(III). The apparent stability constants for the lanthanide complexes with EDTA and DTPA in concentrated litium nitrate solutions have been obtained by extraction, pH-metric titration and solubility. Using these constants, the optimum conditions of separation have been found and the separation factors of REE calculated. The calculated and experimental values are in good agreement. The optimum conditions for the separation of americium(III) from REE in a wide range of lanthanide and complexone concentrations (10⁻¹–10⁻⁶ M) have been determined.     

Synthesis, structures, and conductivities of salts (BEDT-TTF)[9,9′(12′)-I2-3,3′-Co(1,2-C2B9H10)2] and (TTF)[9,9′,12,12′-I4-3,3′-Co(1,2-C2B9H9)2]

The radical cation salts of tetrathiafulvalene (TTF) and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) with iodo derivatives of cobalt bis(dicarbollide), (TTF)[9,9′,12,12′-I₄-3,3′-Co(1,2-C₂B₉H₉)₂] and (BEDT-TTF)[9,9′(12′)-I₂-3,3′-Co(1,2-C₂B₉H₁₀)₂], respectively, were synthesized and their crystal structures were determined. The introduction of iodine atoms into the lower rim of the dicarbollide ligands, unlike the substitution at the upper rim, leads to insignificant changes in the crystal structure and the conductivity of the radical cation salts compared to the analogous salts based on unsubstituted cobalt bis(dicarbollide).     

Chelate polypyridine ligand rearrangement in Au(III) complexes

The reaction of gold(III) neutral complexes AuBr(CN)₂(N–N) {N–N = 2,2′-bipyridine (bpy), 5,5′-dimethyl-2,2′-bipyridine (^Me2bpy), 1,10-phenanthroline (phen)} with a stoichiometric amount of K[AuCl₄] · 2H₂O in nitromethane at room temperature led to the formation of 1:1 electrolytes which were characterized by NMR and IR spectroscopy, conductivity measurements, elemental analyses and X-ray diffraction. Both the anions and the cations of these salts are singly charged square-planar Au(III) complexes and the cations have general formula [AuCl₂(N–N)]⁺. A hypothesis on the possible reaction mechanisms is presented to give an explanation for the formation of the reaction products.     

Complexes of pyrimidine DNA bases with thallium(I)

The stability constants of complexes of a thallium(I) ion with cytosine and thymine were determined in aqueous solution at 25°C and 0.1 mol dm⁻³ ionic media, using a combination of potentiometric and spectrophotometric techniques. Sodium perchlorate was used to maintain the ionic strength. The composition of the formed complexes was determined and it was shown that thallium(I) forms two mononuclear 1:1 species with cytosine of the type TIHL⁺ and TIL, and a mononuclear 1:1 complex species with thymine in the form TIHL, in the pH range of study (1–11), where L represents the fully dissociated ligand. The cumulative stability constants, β _xyz, of the complexes, [(thallium)_x(H)_y(ligand)_z], were calculated by a nonlinear fitting method and their distributions were presented as a function of-log[H⁺]. This text was submitted by the authors in English.     

Complexation of europium(III) with 2,2′-dipyridyl in Eu(An)<Subscript>3</Subscript>-2,2′-dipyridyl ethyl acetate systems

Complexation of europium(III) with 2,2′-dipyridyl in Eu(An)₃-2,2′-dipyridyl-ethyl acetate systems, where An is acetylacetonate, trichloroacetate, or trifluoroacetate ions, was studied by spectrophotometric methods. The stability constants of the complexes at different temperatures were determined, and Gibbs energy, enthalpy, and entropy changes in complexation were calculated. The influence of the initial organic ligands on complexation was elucidated.     

Ternary ion-association complexes between the indium(III) - 4-(2-pyridylazo)resorcinol anionic chelate and some tetrazolium cations

Complex formation and liquid-liquid extraction were studied in systems containing indium(III), 4-(2-pyridylazo)resorcinol (PAR), tetrazolium salt (TZS), water and chloroform. Two different TZS were used: 2,3,5-triphenyl-2H-tetrazolium chloride (TTC) and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide (MTT). The optimum conditions for extraction of In(III) as a ternary complex, (TT⁺)[In(PAR)₂] or (MTT⁺)[In(PAR)₂], were found: pH, extraction time, concentration of PAR and concentration of TZS. The constants of extraction (K_ex), constants of association (β), constants of distribution (K_D) and recovery factors (R%) were determined. The apparent molar absorptivities in chloroform were calculated to be ɛ′₅₂₀=6.6×10⁴ L mol⁻¹ cm⁻¹ and ɛ′₅₁₅=7.1×10⁴ L mol⁻¹ cm⁻¹ for the systems with TTC (I) and MTT (II), respectively. Beer’s law was obeyed for In(III) concentrations up to 3.4 μg mL⁻¹ in both the cases. The limits of detection (LOD=0.07 μg mL⁻¹ I and LOD=0.12 μg mL⁻¹ II), limits of quantification (LOQ=0.24 μg mL⁻¹ I and LOQ=0.41 μg mL⁻¹ II) and Sandell’s sensitivities (SS) were estimated as well.      

Untersuchung Der Kcmplexbildung Von Thallium(III) Mit 1-Phenyl-3-Methyl-4-Benzoylpyrazolon-5

Abstract

A study has been made of the method used for extracting the complex formed between thallium(III) and PhMBP. It has been demonstrated that thallium(III) can be readily extracted as a complex with PhMBP by organic solvents at low pH. The extraction of thallium(III) has been studied as a function of pH, concentration of reagent, nature of solvent, duration of contact of the phases and concentration of thallium(III). It has been established that thallium(III) forms a complex with PhMBP of the type MA_n, where n=3. The stability constants and distribution constant of the neutral complex has been calculated by the method of Leden-Rydberg.     

Complexation of plutonium(IV) with sulfate at variable temperatures

The complexation of plutonium(IV) with sulfate at variable temperatures has been investigated by solvent extraction method. A NaBrO₃ solution was used as holding oxidant to maintain the plutonium(IV) oxidation state throughout the experiments. The distribution ratio of Pu(IV) between the organic and aqueous phases was found to decrease as the concentrations of sulfate were increased. Stability constants of the 1:1 and 1:2 Pu(IV)-HSO₄ ⁻ complexes, dominant in the aqueous phase, were calculated from the effect of [HSO₄ ⁻] on the distribution ratio. The enthalpy and entropy of complexation were calculated from the stability constants at different temperatures using the Van’t Hoff equation.     

Mixed-Ligand Complexes of 2-(Aminomethyl)benzimidazole Palladium(II) with Various Biologically Relevant Ligands

cis-Dichloro(2-(aminomethyl)benzimidazole)palladium(II), [Pd(AMBI)Cl₂], was synthesized and characterized. The stoichiometry and stability constants of the complexes formed between [Pd(AMBI)(H₂O)₂]²⁺ with various biologically relevant ligands containing different functional groups are investigated. The ligands used are dicarboxylic acids, amino acids, peptides and DNA constitutents. The results show the formation of 1:1 complexes with amino acids and dicarboxylic acids. The effect of the chelate ring size of the dicarboxylic acid complexes on their stability constants is examined. Peptides form both 1:1 complexes and the corresponding deprotonated amide species. Structural effects of the peptide on the amide deprotonation are investigated. DNA pyrimidinic constituents such as uracil, uridine, thymidine and thymine form 1:1 and 1:2 complexes, whereas purinic constituents such as inosine 5′-monophosphate (5′-IMP) and guanosine 5′-monophosphate (5′-GMP) form only 1:1 complexes. The concentration distribution of the complexes in solution was evaluated. The effect of increasing chloride ion concentration on the formation constant of CBDCA with Pd(AMBI)²⁺ was reported.     

Radiochemical extraction of mercury(II) from acidic chloride solutions using dialkylsulphides

The liquid-liquid extraction behavior of Hg(II) from aqueous acidic chloride solutions has been investigated by tracer techniques using dialkylsulphides (R₂S) namely, dibutylsulphide (DBS) and dioctylsulphide (DOS) as extractants. These extraction data have been analyzed by both graphical and theoretical methods by taking into account complexation of the metal ion in the aqueous phase with inorganic ligands and all plausible complexes extracted into the organic phase. The results clearly indicate that Hg(II) is extracted into xylene as HgCl₂ ^. nDBS/nDOS (where n = 2 and 3). The equilibrium constants of the extracted complexes have been deduced by non-linear regression analysis. The separation possibilities of Hg(II) from other metal ions viz. Ca(II), Mg(II), Ba(II) and Fe((III), which are present in the industrial wastes of the chlor-alkali industry has also been discussed.     

Extraction and separation of gallium, indium and thallium with several carboxylic acids from chloride media

A method is proposed for the extraction and individual separation of trivalent gallium, indium and thallium with sec-octylphenoxy acetic acid (CA-12), sec-nonylphenoxy acetic acid (CA-100) and naphthenic acid (NA) from chloride media. The distribution equilibria of gallium (III), indium (III), thallium (III) and thallium (I) between carboxylic acids (CA-12, CA-100 and NA) dissolved in kerosene and acidic aqueous chloride media has been investigated as a function of the concentration of extractants and the concentration of hydrogen ion in aqueous phase. A possible mechanism of the extraction is discussed. The method permits rapid and precise individual separation of gallium (III), indium (III) and thallium (III), and is applicable to the analysis of alloy samples.     

Synthesis,DNA-binding and photocleavage studies of cobalt(III) complexes [Co(bpy)<Subscript>2</Subscript>(dpta)]<Superscript>3+</Superscript> and [Co(bpy)<Subscript>2</Subscript>(amtp)]<Superscript>3+</Superscript>

Two novel cobalt(III) mixed-polypyridyl complexes [Co(bpy)₂(dpta)]³⁺ and [Co(bpy)₂(amtp)]³⁺ (bpy = 2,2′-bipyridine, dpta = dipyrido-[3,2-a;2′,3′-c]-thien-[3,4-c]azine, amtp = 3-amino-1,2,4-triazino[5,6-f]-1,10-phenanthroline) have been synthesized and characterized. The interaction of Co^III complexes with calf thymus DNA was investigated by spectroscopic and viscosity measurements. Results suggest that the two complexes bind to DNA via an intercalative mode. Moreover, Co^III complexes have been found to promote the photocleavage of plasmid DNA pBR322 under irradiation at 365 nm. The mechanism studies reveal that hydroxyl radical (OH^•) is likely to be the reactive species responsible for the cleavage of plasmid DNA by [Co(bpy)₂(dpta)]³⁺ and superoxide anion radical (O ₂ ^•− ) acts as the key role in the cleavage reaction of plasmid DNA by [Co(bpy)₂(amtp)]³⁺.     

Studies on mixed ligand complexes of samarium(III), europium(III) and dysprosium(III) with 1-nitroso-2-naphthol and trioctylphosphine oxide

The extraction behavior of Sm(III), Eu(III) and Dy(III) with 1-nitroso-2-naphthol (HA) and trioctylphosphine oxide (TOPO) in methyl isobutyl ketone (MIBK) from aqueous NaClO₄ solutions in the pH range 4–9 at 0.1M ionic strength has been studied. The equilibrium concentrations of Sm and Dy were measured using their short-lived neutron activation products,¹⁵⁵Sm and^165mDy, respectively. In the case of Eu, the concentrations were assayed through the^152,154Eu radiotracer. The distribution ratios of these elements were determined as a function of pH, 1-nitroso-2-naphthol and TOPO concentrations. The extractions of Sm, Eu and Dy were found to be quantitative with MIBK solutions in the pH range 5.9–7.5, 5.6–7.5 and 5.8–7.5, respectively. Quantitative extraction of Eu was also obtained between pH 5.8 and 8.8 with chloroform solutions. The results show that these lanthanides (Ln) are extracted as LnA₃ chelates with 1-nitroso-2-naphthol alone, and in the presence of TOPO as LnA₃(TOPO) and LnA₃(TOPO)₂ adducts. The extraction constants and the adduct formation constants of these complexes have been calculated.