Spontaneous Formation of Biocompatible Vesicles in Aqueous Mixtures of Amino Acid‐Based Cationic Surfactants and SDS/SDBS

The spontaneous formation of vesicles by six amino acid‐based cationic surfactants and two anionic surfactants (sodium dodecylbenzene sulfonate (SDBS) and sodium dodecyl sulfate (SDS)) is reported. The head‐group structure of the cationic surfactants is minutely altered to understand their effect on vesicle formation. To establish the regulatory role of the aromatic group in self‐aggregation, both aliphatic and aromatic side‐chain‐substituted amino acid‐based cationic surfactants are used. The presence of aromaticity in any one of the constituents favors the formation of vesicles by cationic/anionic surfactant mixtures. The formation of vesicles is primarily dependent on the balance between the hydrophobicity and hydrophilicity of both cationic and anionic surfactants. Vesicle formation is characterized by surface tension, fluorescence anisotropy, transmission electron microscopy, dynamic light scattering, and phase diagrams. These vesicles are thermally stable up to 65 °C, determined by temperature‐dependent fluorescence anisotropy. According to the MTT assay, these catanionic vesicles are nontoxic to NIH3T3 cells, thus indicating their wider applicability as delivery vehicles to cells. Among the six cationic surfactants examined, tryptophan‐ and tyrosine‐based surfactants have the ability to reduce HAuCl₄ to gold nanoparticles (GNPs), which is utilized to obtain in‐situ‐synthesized GNPs entrapped in vesicles without the need for any external reducing agent.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (2): Aggregation Behavior

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in the aqueous solution were investigated by surface tension, rheology, and dynamic light scattering measurements. It was shown that the key‐lock interactions between β‐CD and mixed cationic‐anionic surfactants were stronger than the electrostatic/hydrophobic interactions between cationic and anionic surfactants. The inclusion of β‐CD to surfactants could destroy the ion‐pair and aggregates of cationic‐anionic surfactants, and even inhibited the precipitation of the mixed cationic‐anionic surfactants. Furthermore, the inclusion of β‐CD to surfactants could also destroy the hydrogen bond between β‐CD molecules, inducing the disassociation of the aggregation formed by β‐CD themselves.     

Characterization and Aggregation Behaviors of Mixed DDAB/SDS Solution With and Without Poly(4-styrenesulfonic Acid-Co-Maleic Acid) Sodium

Synthetic vesicles are formed by cationic and anionic surfactants, didodecyldimethylammonium bromide (DDAB), and sodium dodecylsulfate (SDS). The morphology, size, and aqueous properties of cationic/anionic mixtures are investigated at various molar ratios between cationic and anionic surfactants. The charged vesicular dispersions made of DDAB/SDS are contacted or mixed with negatively charged polyelectrolyte, poly(4-styrenesulfonic acid-co-maleic acid) sodium (PSSAMA), to form complexes. Depending on DDAB/SDS molar ratio or PSSAMA/vesicle charge ratio, complexes flocculation or precipitation occur. Characterization of the cationic/anionic vesicles or complexes formed by the catanionic vesicles and polyelectrolytes is performed by transmission electron microscope (TEM), dynamic light scattering (DLS), conductivity, turbidity, and zeta potential measurements. The size, stability, and the surface charge on the mixed cationic/anionic vesicles or complexes are determined.     

Specific interactions of poly(4-vinyl phenol) gel with cationic and anionic surfactants

Binding behaviors of ionic surfactants (decyl- and dodecyltrimethylammonium bromide (C(10)TAB, C(12)TAB), sodium decane sulfonate (SDeSo), and sodium dodecyl sulfate (SDS)) to poly(4-vinyl phenol) (P4VPh) gel were investigated to elucidate a specific swelling behavior that has been found for P4VPh gel in aqueous solutions of tetraalkylammonium salts. With increasing cationic surfactant concentration, P4VPh gel significantly deswelled and then remarkably reswelled at a concentration somewhat below the respective cmc values. On the other hand, in the case of the anionic surfactants, the gel only showed a marked swelling at a concentration just below the respective cmc values. A similar charge-specific behavior of the surfactants was also found for the P4VPh dispersion system studied with a UV-vis spectroscopy; namely, in the cationic surfactant-P4VPh systems, the turbidity of the dispersion first increased with increasing the surfactant concentration and then decreased. This result suggests that aggregation of P4VPh particles first occurred and finally the particles were solubilized. A red shift followed by a blue shift observed for a pi-pi absorption of phenol at around 278 nm was also consistent with the aggregation-solubilization behavior. In the anionic surfactant-P4VPh system, however, only solubilization of the polymer particle was observed, and the UV peak only showed a blue shift. All these results in the gel and the dispersion systems strongly suggest that the cation-pi interaction is involved in the binding of the cationic surfactants to P4VPh.     

Concise synthesis of pyrrolidine and indolizidine alkaloids by a highly convergent three-component reaction

The synthesis of pyrrolidine and indolizidine derivatives through radical carboazidation of alkenes with α-iodoketones, followed by reductive amination, is described. When properly substituted, further lactamization afforded pyrrolizidinones in good yield. This carboazidation/reductive amination sequence was efficiently applied to the total synthesis of three different simple alkaloids, including (±)-monomorine I.     

Interaction between β‐Cyclodextrin and Mixed Cationic‐Anionic Surfactants (1): Thermodynamic Study

The interactions between β‐cyclodextrin (β‐CD) and the mixtures of cationic‐anionic surfactants in aqueous solution were investigated by surface tension and ¹H NMR measurements. It was shown that the critical micelle concentration (cmc) increased linearly with the increase of β‐CD concentration. Furthermore, β‐CD formed 1∶1 inclusion complex with both cationic and anionic surfactants in the mixed surfactant systems, and no significant selective inclusion was observed. The thermodynamic parameters of the inclusion process of β‐CD to mixed cationic‐anionic surfactants were calculated by a numerical method based on the surface tension measurements, and it was found that the inclusion process was both enthalpy and entropy favorable.     

Effect of Surfactants on the Formation,Morphology, and Surface Property of Synthesized SiO2 Nanoparticles

Abstract

This study investigated the effect of cationic, anionic (saturated and unsaturated), and nonionic surfactants on the formation, morphology, and surface properties of silica nanoparticles synthesized by the ammonium‐catalyzed hydrolysis of tetraethoxysilane in alcoholic media. Results indicate that at a relatively low surfactant concentration (1 × 10^?3–1 × 10^?6 M), cationic surfactants significantly affected the growth of silica particles as measured by dynamic light scattering and transmission electron microscopic analyses. In contrast, the anionic and nonionic surfactants showed relatively minor effects in the low concentration range. The magnitude of negative zeta potential was reduced for silica colloids that were synthesized in the presence of cationic surfactant because of charge neutralization. The presence of anionic surfactants only slightly increased the negative zeta potential while the nonionic surfactant showed no obvious effects. At high surfactant concentrations (>1 × 10^?3 M), cationic and anionic surfactants both induced colloid aggregation, while the nonionic surfactant showed no effect on particle size. Raman spectroscopic analysis suggests that molecules of cationic surfactants adsorb on silica surfaces via head groups, aided by favorable electrostatic attraction, while molecules of anionic and nonionic surfactants adsorb via their hydrophobic tails.     

阴、阳离子表面活性剂混合体系在硅胶/水及硅胶/矿化水界面上的吸附

研究阴、阳离子表面活性剂混合体系(十二烷基氯代吡啶,辛基磺酸钠,辛基三乙基溴化铵/十二烷基苯磺酸钠)在硅胶,纯水和硅胶,矿化水界面上的吸附作用,探讨阴(阳)离子表面活性剂的存在对阳(阴)离子表面活性剂吸附作用的影响．结果表明,阴离子表面活性剂的存在基本不影响阳离子表面活性剂在带负电固体表面的吸附;而阳离子表面活性剂的存在却使本来吸附量就不大的阴离子表面活性剂在带负电的固体表面上不再吸附．在矿化水中阳离子表面活性剂的吸附量比在纯水中明显降低．从硅胶表面吸附机制解释了所得结果．     

Effect of anionic and cationic micelles on the oxidation of <Emphasis Type="SmallCaps">D</Emphasis>-glucose by cerium(IV) in presence of H<Subscript>2</Subscript>SO<Subscript>4</Subscript>

The influence of surfactants (anionic and cationic) on the reactivity of the redox couple cerium(IV) and D-glucose was examined spectrophotometerically. Various kinetic parameters have been determined in the absence and presence of surfactants. The kinetics were followed by monitoring the disappearance of the absorbance of cerium(IV) at 385 nm. The reaction obeyed first-order kinetics with respect to [D-glucose] in both media. No effect of anionic micelles of sodium dodecyl sulfate (SDS) was observed due to electrostatic repulsion between the negative head group of SDS and reactive species of cerium(IV) (Ce(SO₄) ₃ ²⁻ ). A twofold increase in the oxidation rate was observed in the presence of cationic micelles of cetyltrimethylammonium bromide (CTAB). The observed catalytic role has been analyzed in terms of the Menger–Portnoy model. The effects of various inorganic salts (Na₂SO₄, NaNO₃ and NaCl) were also studied in micellar media.     

Interaction between the water soluble poly{1,4-phenylene-[9,9-bis(4-phenoxy butylsulfonate)]fluorene-2,7-diyl} copolymer and ionic surfactants followed by spectroscopic and conductivity measurements

The interaction has been studied in aqueous solutions between a negatively charged conjugated polyelectrolyte poly{1,4-phenylene-[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer (PBS-PFP) and several cationic tetraalkylammonium surfactants with different structures (alkyl chain length, counterion, or double alkyl chain), with tetramethylammonium cations and with the anionic surfactant sodium dodecyl sulfate (SDS) by electronic absorption and emission spectroscopy and by conductivity measurements. The results are compared with those previously obtained on the interaction of the same polymer with the nonionic surfactant C12E5. The nature of the electrostatic or hydrophobic polymer-surfactant interactions leads to very different behavior. The polymer induces the aggregation with the cationic surfactants at concentrations well below the critical micelle concentration, while this is inhibited with the anionic SDS, as demonstrated from conductivity measurements. The interaction with cationic surfactants only shows a small dependence on alkyl chain length or counterion and is suggested to be dominated by electrostatic interactions. In contrast to previous studies with the nonionic C12E5, both the cationic and the anionic surfactants quench the PBS-PFP emission intensity, leading also to a decrease in the polymer emission lifetime. However, the interaction with these cationic surfactants leads to the appearance of a new emission band (approximately 525 nm), which may be due to energy hopping to defect sites due to the increase of PBS-PFP interchain interaction favored by charge neutralization of the anionic polymer by cationic surfactant and by hydrophobic interactions involving the surfactant alkyl chains, since the same green band is not observed by adding either tetramethylammonium hydroxide or chloride. This effect suggests that the cationic surfactants are changing the nature of PBS-PFP aggregates. The nature of the polymer and surfactant interactions can, thus, be used to control the spectroscopic and conductivity properties of the polymer, which may have implications in its applications.     

EVALUATION OF MODEL FOR STRATUM CORNEUM LIPID BARRIER AGAINST STEROID DIFFUSION

The ability of three matrices to model the barrier properties of the lipid domain of stratum corneum (SC) against permeation of seven steroids was studied. Model matrices were water and oleic acid/oleate; a mixture of unsaturated and saturated fatty acids/soap; or a more complex matrix also containing phospholipids, sphingolipids, cholesterol and ceramides.

Permeability coefficients (K.) were similar in the three models, supporting the hypothesis that the barrier to steroid permeation is determined by the structural organization of the lipids, not by the chemical structure of individual substances. Parabolic relationships were found between K values and octanol/water partition coefficients (P_oct) of the steroids, with an optimum permeability at log P_oct, of 3·0. All three models showed good resistance to permeability by steroids. The effects of cationic, anionic and non-ionic surfactants on the permeability of hydrocortisone within the water oleic acid/oleate matrix were also investigated. Permeability increased with anionic surfactants, decreased with cationic surfactants and varied little with non-ionic surfactants. The matrices tested appeared able to model the effect of surfactants on the permeability of hydrocortisone through the SC     

Three-phase contact parameters measurements for silica-mixed cationic–anionic surfactant systems

The stability and interactions in thin wetting films between the silica surface and air bubble containing (a) straight chain C₁₀ amine and (b) cationic/anionic surfactant mixture of a straight chain C₁₀ amine with sodium C₈, C₁₀ and (straight chain) C₁₂ sulfonates, were studied using the microscopic thin wetting film method developed by Platikanov [D. Platikanov, J. Phys. Chem. 68 (1964) 3619]. Film lifetimes, three-phase contact (TPC) expansion rate, receding contact angles and surface tension were measured. The presence of the mixed cationic/anionic surfactants was found to lessen contact angles and suppresses the thin aqueous film rupture, thus inducing longer film lifetime, as compared to the pure amine system. In the case of mixed surfactants heterocoagulation could arise through the formation of positively charged interfacial complexes. Mixed solution of cationic and anionic surfactants shows synergistic lowering in surface tension. The formation of the interfacial complex at the air/solution interface was confirmed by surface tension data. It was also shown, that the chain length compatibility between the anionic and cationic surfactants system controls the strength of the interfacial complex. The observed phenomena were discussed in terms of the electrostatic heterocoagulation theory, where the interactions can be attractive or repulsive depending on the different surface activity and charge of the respective surfactants at the two interfaces.     

胶束催化作用下实现聚苯乙烯的氯甲基化

用紫外分光光度法测定了离子型表面活性剂胶束溶液对聚苯乙烯四氯化碳溶液的增溶性能; 用胶束催化法实现了聚苯乙烯的氯甲基化, 用红外光谱法和佛尔哈德法表征了氯甲基化聚苯乙烯的化学结构与组成; 通过比较阴、 阳离子表面活性剂及结构不同的阳离子表面活性剂的催化效果, 探索了胶束催化的作用机理, 考察了表面活性剂结构对催化作用的影响规律. 结果表明, 表面活性剂胶束溶液可增溶聚苯乙烯的四氯化碳溶液, 随着四氯化碳在胶束中的增溶, 聚苯乙烯可转移至表面活性剂的胶束中; 胶束催化是实现聚苯乙烯的氯甲基化的有效途经, 仅用3.35 g/L的十六甲基三甲基溴化铵(CTAB),  于65 ℃， 5 h内即可使聚苯乙烯大分子链中的苯环氯甲基化程度达到37%; 聚苯乙烯与甲醛、 氯化氢的反应过程由亲电取代和亲核取代串联而成, 阳离子表面活性剂比阴离子表面活性剂的催化作用更加有效, 说明亲核取代是慢步骤; 阳离子表面活性剂疏水链越长, 对聚苯乙烯的增溶效果越好, 催化作用越强.     

Sensing micelle hydration by proton-transfer dynamics of a 3-hydroxychromone dye: role of the surfactant headgroup and chain length

The dynamics of the excited-state intramolecular proton-transfer (ESIPT) reaction of 2-(2'-furyl)-3-hydroxychromone (FHC) was studied in micelles by time-resolved fluorescence. The proton-transfer dynamics of FHC was found to be sensitive to the hydration and charge of the micelles, demonstrated through a decrease of the ESIPT rate constant (k(PT)) in the sequence cationic → nonionic → anionic micelles. A remarkably slow ESIPT with a time constant (τ(PT)) of ~100 ps was observed in the anionic sodium dodecyl sulfate and sodium tetradecyl sulfate micelles, whereas it was quite fast (τ(PT) ≈ 15 ps) in the cationic cetyltrimethylammonium bromide and tetradecyltrimethylammonium bromide micelles. In the nonionic micelles of Brij-78, Brij-58, Tween-80, and Tween-20, ESIPT occurred with time constants (τ(PT) ≈ 35-65 ps) intermediate between those of the cationic and anionic micelles. The slower ESIPT dynamics in the anionic micelles than the cationic micelles is attributed to a relatively stronger hydration of the negatively charged headgroups of the former than the positively charged headgroups of the latter, which significantly weakens the intramolecular hydrogen bond of FHC in the Stern layer of the anionic micelles compared to the latter. In addition, electrostatic attraction between the positively charged -N(CH(3))(3)(+) headgroups and the negatively charged 4-carbonyl moiety of FHC effectively screens the intramolecular hydrogen bond from the perturbation of water molecules in the micelle-water interface of the cationic micelles, whereas in the anionic micelles, this screening of the intramolecular hydrogen bond is much less efficient due to an electrostatic repulsion between its negatively charged -OSO(3)(-) headgroups and the 4-carbonyl moiety. As for the nonionic micelles, a moderate level of hydration, and the absence of any charged headgroups, causes an ESIPT dynamics faster than that of the anionic but slower than that of the cationic micelles. Furthermore, the ESIPT rate decreased with a decrease of the hydrophobic chain length of the surfactants due to the stronger hydration of the micelles of shorter chain surfactants than those of longer chain surfactants, arising from a less compact packing of the former surfactants compared to the latter surfactants.     

表面活性剂双水相界面性质的研究

表面活性剂双水相是指正、负离子表面活性剂混合水溶液在一定浓度及混合比 范围内，自发分离形成的两个互不相溶的水相。前文报道了将其作为一种新型萃取 体系，用于生物活性物质的分离。目前有关其相行为、化学物质和生物大分子的分 配方面已有较多研究，但未见两相之间界面化学性质研究的报道。表面活性剂双水 相的形成是一种奇特的相分离现象，两个稀水溶液（含水量可高达99%以上）互不 相溶、平衡共存，其界面结构和界面张力必有其特殊性。     

表面胶团修饰电极电化学测定双酚A的增敏机理及抗污性能研究

分别以2种阴离子表面活性剂(SDS、SDBS)、3种季铵盐阳离子表面活性剂(CTAB、TTAB、DTAB)和2种季铵盐型双子表面活性剂(12-3-12、12-4-12)修饰碳糊电极。通过原子力显微镜、接触角以及分析物在电极表面的电化学行为探讨了不同表面活性剂在电极表面的吸附情况,推测在浓度大于临界胶束浓度(CMC)时,季铵盐型阳离子表面活性剂CTAB、TTAB、12-3-12和12-4-12在碳糊电极表面形成了圆柱形的表面胶团,而DTAB和SDS可能是饱和单分子层吸附。以BPA为分析物,研究了表面活性剂修饰电极对BPA的电化学增敏机理,结果表明修饰电极对双酚A(BPA)的电化学增敏作用主要是因为表面胶团对BPA的增溶作用,表面活性剂和BPA间的阳离子-π作用是表面胶团增溶BPA的主要原因。     

Micellar Effects on the Reduction of 4‐Nitroimidazole Derivative: Detection and Quantification of the Nitroradical Anion

The reductive electrochemistry of 1‐methyl‐4‐nitro‐2‐hydroxymethylimidazole, a 4‐nitroimidazole derivative, was examined in the presence of surfactants anionic as sodium dodecyl sulfate (SDS), nonionic, Triton‐X, Cationic, Hyamine and Cetyl Trimethyl Ammonium Bromide (CTAB). The reductive mechanism of the nitroimidazole derivative was found to be dependent of both, nature and concentration of the surfactants.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

Ion-selective electrodes for anionic surfactants using a cyclam derivative as ionophore

The cyclam derivative 1,4,8,11-tetra(n-octyl)-1,4,8,11-tetraazacyclotetradecane (L) has been used as carrier for the preparation of PVC-based membrane ion-selective electrodes for anionic surfactants. Different membranes were prepared using L as ionophore, tetra-n-octylammonium bromide (TOAB) as cationic additive and dibutyl phthalate (DBP) or o-nitrophenyl octyl ether (NPOE) as plasticizers. The final used electrode contained a membrane of the following composition: 56% DBP, 3.4% ionophore, 3.8% TOAB and 36.8% PVC. This electrode displays a Nernstian slope of -60.0+/-0.9 mV/decade in a 2.0 x 10(-3) to 7.9 x 10(-6) mol dm(-3) concentration range and a limit of detection of 4.0 x 10(-6) mol dm(-3). The electrode can be used for 144 days without showing significant changes in the value of slope or working range. The electrode shows a selective response to dodecyl sulfate (DS-) and a poor response to common inorganic cations and anions. The selective sequence found was DS->ClO4->HCO3->SCN->NO3- approximately CH3COO- approximately I->Cl->Br->IO3- approximately NO2- approximately SO3(2-)>HPO4(2-)>C2O4(2-)>SO4(2-), i.e. basically following the Hoffmeister series except for the hydrophilic anion bicarbonate. Most of the potentiometric coefficients determined are relatively low indicating that common anions would not interfere in the DS- determination. A complete study of the response of the electrode to a family of surfactant was also carried out. The electrode showed a clear anionic response to DS- and to Na-LAS and a much poorer response to other anionic surfactants and to non-ionic surfactants. Also the electrode shows certain non-linear cationic response in the presence of cationic and zwitterionic surfactants. The electrode was used for the determination of anionic surfactants in several mixtures, and the results obtained were compared to those found using a commercially available sensor.     

Reductive Amination by Photoredox Catalysis and Polarity‐Matched Hydrogen Atom Transfer

The excitation of a Ru^II photosensitizer in the presence of ascorbic acid leads to the reduction of iminium ions to electron‐rich α‐aminoalkyl radical intermediates, which are rapidly converted into reductive amination products by thiol‐mediated hydrogen atom transfer (HAT). As a result, the reductive amination of carbonyl compounds with amines by photoredox catalysis proceeds in good to excellent yields and with broad substrate scope and good functional group tolerance. The three key features of this work are 1) the rapid interception of electron‐rich α‐aminoalkyl radical intermediates by polarity‐matched HAT in a photoredox reaction, 2) the method of reductive amination by photoredox catalysis itself, and 3) the application of this new method for temporally and spatially controlled reactions on a solid support, as demonstrated by the attachment of a fluorescent dye on an activated cellulose support by photoredox‐catalyzed reductive amination.