Preparation, coordination properties and catalytic use of 1′-(diphenylphosphanyl)-1-ferrocenecarboxamides bearing 2-hydroxyethyl pendant groups

Polar amido-phosphane ligands, viz 1-(diphenylphosphanyl)-1′-[N-(2-hydroxyethyl)carbamoyl]ferrocene (1) and 1-(diphenylphosphanyl)-1′-[N,N-bis(2-hydroxyethyl)carbamoyl]ferrocene (2) were synthesised from 1′-(diphenylphosphanyl)-1-ferrocenecarboxylic acid (Hdpf) by direct amide coupling or via Hdpf-pentafluorophenyl ester 3. Subsequent reactions of 1 and 2 with [PdCl₂(cod)] (cod = η²:η²-cyclocta-1,5-diene) gave the respective bis(phosphane) complexes trans-[PdCl₂L₂] (4, L = 1; 5, L = 2). Depending on the solvent used in their subsequent crystallisation (ethanol or chloroform), these complexes were isolated in several defined solvated forms. The structure determination for free ligands and their solvated complexes (4·2EtOH, 4·6CHCl₃, 5·2EtOH, and 5·4CHCl₃) revealed the dominating role of hydrogen bonding in their crystal assemblies, the nature and complexity of the formed hydrogen-bonded arrays strongly varying with the ligand structure (one vs. two 2-hydroxethyl chains), their number in the discrete species (free ligands vs. the complexes), and also with the solvate. Catalytic tests performed with 4 and 5 in Suzuki-Miyaura cross-coupling reaction showed that both complexes form active catalysts for the coupling of aryl bromides with phenylboronic acid in common polar organic solvents, in water and in toluene-water biphasic mixture. Yet, complex 4 gave rise to hydrolytically more stable catalyst, which could be used five times without any detectable loss of activity in the toluene/water system. Complex 4 was also successfully applied to the synthesis of biaryl anti-inflammatory drugs and their analogues in pure water and in the toluene-water mixture.     

Preparation, structural characterisation and electrochemical properties of iron(0) and tungsten(0) carbonyl complexes with 1-(diphenylphosphanyl)-1′-vinylferrocene and 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene as P-monodentate ligands

A new organometallic phosphanylalkene, 1-(diphenylphosphanyl)-1′-(dimethylvinylsilyl)ferrocene (2) was prepared and—together with 1-(diphenylphosphanyl)-1′-vinylferrocene (1)—studied as a ligand in iron- and tungsten-carbonyl complexes. The following complexes featuring the mentioned phosphanylalkenes as P-monodentate donors were isolated and characterised by spectral methods: [Fe(CO)₄(L-κP)] (4, L = 1; 5, L = 2) and trans-[W(CO)₄(L-κP)₂] (6, L = 1; 7, L = 2). In addition, the solid-state structures of 4 and 6 have been determined by single-crystal X-ray diffraction and the electrochemical properties of compounds 1, 2, 4 and 6 were studied by cyclic voltammetry at platinum electrode.     

Synthesis, structural characterization, and initial electroluminescent properties of bis-cycloiridiated complexes of 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine

A series of bis-cyclometalated Ir(III) complexes (8-10, 12, 15, 17, 19, 21, 23, 25, 28, 29 and 33) bearing two chromophoric N^∧C cyclometalated ligands derived from 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine (1) and a third nonchromophoric ligand has been synthesized. A palladium-catalyzed cross-coupling reaction between 2-chloro-4-methylpyridine (2) and 3,5-bis(trifluoromethyl)phenylboronic acid (3) was used to prepare 2-(3,5-bis(trifluoromethyl)phenyl)-4-methylpyridine (1). Cyclometalation of (1) by IrCl₃ was carried out in (MeO)₃PO, with the formation of chloro-bridged dimer [N^∧C]₂Ir(μ-Cl)₂Ir[C^∧N]₂ (8). Reaction of (8) with lithium 2,4-pentanedionate, lithium 2,2,6,6-tetramethyl-heptane-3,5-dionate (13), dipivaloyltrimethylsilylphosphine (14), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octadione (16), 1,1,1,3,3,3-hexafluoro-2-pyridin-2-yl-propan-2-ol (18), 1,1,1,3,3,3-hexafluoro-2-pyrazol-1-ylmethyl-propan-2-ol (20), 2-diphenylphosphanylethanol (22), and 1-diphenylphosphanylpropan-2-ol (24), afforded octahedral iridium complexes 9, 12, 15, 17, 19, 21, 23 and 25, respectively. Complex 10, which contains three different ligands (L₁ = N^∧C of 1; L₂ = N^∧C of 4,4′-dimethyl-[2,2′]bipyridinyl 4; L₃ = O^∧O of 2,4-pentanedione), and complex 11, which contains no cyclometalated ligands (L₁ = 4; L₂ = L₃ = Cl; L₄ = O^∧O of 2,4-pentanedione) were also isolated as minor products in a one-pot reaction between a 94:5 mixture of 1 and 4, IrCl₃ and lithium 2,4-pentanedionate. Reaction of 8 with diphenylphosphanylmethanol (27) in 1,2-dichloroethane unexpectedly led to complexes 28 and 29. The reactions of 8 with benzoylformic acid resulted in the formation of hydroxyl-bridged dimer [N^∧C]₂Ir(μ-OH)₂Ir[C^∧N]₂ (33). According to X-ray analyses, Ir-to-Ir distances in the crystal cell increase from 6.86 Å for 10 to 13.31 Å for 33. The angle theta, which represents the twisting of two cyclometalated C-Ir-N planes relative to each other, varies from 97.5° for 21 to 90.76 for complex 28. OLED devices were fabricated from several Ir complexes and preliminary results are discussed.     

New Alq3 derivatives with efficient photoluminescence and electroluminescence properties for organic light-emitting diodes

Two new ligands prepared under solvent free conditions and five aluminum complexes derived from 8-hydroxyquinoline have been synthesized and characterized. The majority of the new aluminum tris(8-hydroxyquinoline) derivatives have nitrogen functionalities at position-4 of the quinolate ligand. The photoluminescence emission wavelengths of the new Alq₃ derivatives are shifted according to the electronic properties of the substituents at position-4. Results from differential scanning calorimetry (DSC) investigations of the new Alq₃ derivatives indicate that the complexes 9 and 10 are non crystalline and have higher transition glass temperatures than the parent Alq₃. The EL measurements of OLED devices with complexes 7, 9, and 10 as emitters revealed that complexes 7, 9, and 10 are efficient emitters in organic light emitting diodes.     

A facile stereoselective synthesis of (E)-1,2-disubstituted vinylstannanes via hydromagnesiation of alkylarylacetylenes

Hydromagnesiation of alkylarylacetylenes 1 in diethyl ether gave (E)-α-arylvinyl Grignard reagents 2, which reacted with trialkylstannyl chlorides 3 in diethyl ether to afford stereoselectively (E)-1,2-disubstituted vinylstannanes 4 in high yields.     

Photophysical properties and computational investigations of tricarbonylrhenium(I)[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]L and tricarbonylrhenium(I)[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]L derivatives (X = N-CH3, O, or S; L = Cl, pyridine)

We report a combined experimental and computational study of new rhenium tricarbonyl complexes based on the bidentate heterocyclic N-N ligands 2-(4-methylpyridin-2-yl)benzo[d]-X-azole (X = N-CH₃, O, or S) and 2-(benzo[d]-X-azol-2-yl)-4-methylquinoline (X = N-CH₃, O, or S). Two sets of complexes are reported. Chloro complexes, described by the general formula Re(CO)₃[2-(4-methylpyridin-2-yl)benzo[d]-X-azole]Cl (X = N-CH₃, 1; X = O, 2; X = S, 3) and Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]Cl (X = N-CH₃, 4; X = O, 5; X = S, 6) were synthesized heating at reflux Re(CO)₅Cl with the appropriate N-N ligand in toluene. The corresponding pyridine set {Re(CO)₃[2-(4-methylpyridin-2-yl)benzo-X-azole]py}PF₆ (X = N-CH₃, 7; X = O, 8; X = S, 9) and {Re(CO)₃[2-(benzo[d]-X-azol-2-yl)-4-methylquinoline]py}PF₆ (X = N-CH₃, 10; X = O, 11; X = S, 12) was synthesized by halide abstraction with silver nitrate of 1-6 followed by heating in pyridine and isolated as their hexafluorophosphate salts. All complexes have been fully characterized by IR, NMR, electrochemical techniques and luminescence. The crystal structures of 1 and 7 were obtained by X-ray diffraction. DFT and time-dependent (TD) DFT calculations were carried out for investigating the effect of the organic ligand on the optical properties and electronic structure of the reported complexes.     

Preparation of phosphinoferrocene carboxamides from isocyanates. Synthesis and structural characterisation of palladium(II) and platinum(II) complexes with 1′-(diphenylphosphino)-1-(N-phenylcarbamoyl)ferrocene

The reaction of in situ generated 1′-(diphenylphosphino)-1-lithioferrocene with isocyanates RNCO affords the respective phosphino-carboxamides Ph₂PfcCONHR (fc = ferrocene-1,1′-diyl, R = cyclohexyl (2), and Ph (3)) in moderate yields. The coordination behaviour of 3 chosen as a representative was studied in palladium(II) and platinum(II) complexes. Depending on the metal precursor and the reaction conditions, the following compounds featuring this ligand as a P-monodentate or an O,P-chelating donor were isolated and characterised by spectroscopic methods (IR, multinuclear NMR and electrospray ionisation MS): trans-[PdCl₂(3-κP)₂] (5), trans-[PtCl₂(3-κP)₂] (6), cis-[PtCl₂(3-κP)₂] (7), [SP-4-4]-[(L^NC)PdCl(3-κP)] (8; L^NC = 2-[(dimethylamino-κN)methyl]phenyl-κC¹), and [SP-4-3]-[(L^NC)PdCl(3-κ²O,P)]SbF₆ (9). Besides, the crystal structures of a phosphine oxide resulting by oxidation of 2, viz Ph₂P(O)fcCONHCy (4), and of complexes 5·2Et₂O and 9 have been determined by single-crystal X-ray diffraction analysis.     

Conversion of novel palladacycles into oxopyrrolo[3,4-b]quinolines

The quinolinylcyclopalladated complexes 3a–b were synthesised in good yields (81% and 77%) by the insertion reaction of the prepared dinuclear palladium complexes [Pd(C,N-2-C₉H₄N-CHO-3-R-6)Cl(PPh₃)]₂ [(R = H (2a), R = OMe (2b)] with isonitrile XyNC (Xy = 2,6-Me₂C₆H₃). The cyclopalladated complexes 3a–b were also obtained in low yields (39% and 33.5%) via a one pot oxidative addition reaction of quinoline chloride 1a–b with isonitrile XyNC:Pd(dba)₂ (4:1). The reactions of 3a–b with Tl(TfO) (TfO = triflate, CF₃SO₃) in the presence of H₂O or EtOH causes depalladation reactions of the complexes to provide the corresponding organic compounds 4a–b, 5a–b and 6a–b in yields (41%, 27% and 18–19%). The products were characterized by satisfactory elemental analyses and spectral studies (IR, ¹H, ¹³C and ³¹P NMR). The crystal structures of 2a, 3a and 3b were determined by X-ray diffraction studies.     

Syntheses, characterization and crystal structures of di- and triorganotin (IV) derivatives with 6-amino-1,3,5-triazine-2,4-dithiol

A series of organotin (IV) complexes with 6-amino-1,3,5-triazine-2,4-dithiol of the type [(R_nSnCl_4−n)₂ (C₃H₂N₄S₂)] (n = 3: R = Me 1, n-Bu 2, PhCH₂3, Ph 4; n = 2: R = Me 5, n-Bu 6, PhCH₂7, Ph 8) have been synthesized. All the complexes 1-8 have been characterized by elemental analysis, IR, ¹H and ¹³C NMR spectra. Among them complexes 1, 4, 5 and 8 have also been characterized by X-ray crystallography diffraction analyses, which revealed that the tin atoms of complexes 1, 4, 5 and 8 are all five-coordinated with distorted trigonal bipyramid geometries.     

Synthesis and structural characterization of rac-2-[(diphenylphosphino)methyl]ferrocenecarboxylic acid, its selected derivatives and some rhodium complexes

rac-2-[(Diphenylphosphino)methyl]ferrocenecarboxylic acid (1) was prepared in a good yield from rac-2-(N,N-dimethylaminomethyl)bromoferrocene (2) via rac-2-(hydroxymethyl)bromoferrocene (4) and rac-2-[(diphenylphosphino)methyl]bromoferrocene (5), and further converted to the respective phosphine oxide (6), phosphine sulfide (7) and methyl ester (8). The phosphines 1 and 8 were studied as ligands in rhodium complexes. The reaction of di-μ-chloro-bis[chloro-(η⁵-pentamethylcyclopentadienyl)rhodium(III)] with the stoichiometric amounts of 1 and 8 yielded the corresponding mononuclear complexes with P-monodentate ligands: [RhC₂(η⁵-C₅Me₅)(L-κP)], 9 and 10, respectively. Attempted deprotonation of 9 with LiBu or KOt-Bu gave intractable mixtures, in which the parent complex 9 as the major component was accompanied by two new compounds, likely the diastereoizomeric phosphinocarboxylate complexes. A defined O,P-chelating phosphinocarboxylate complex, [SP-4-2]-carbonyl-[rac-2-{(diphenylphosphino)methyl}ferrocenecarboxylato-κ²O,P]-tricyclohexylphosphinerhodium(I) (12), was obtained from the displacement of acetylacetonate(1−) (acac) ligand in [Rh(acac)(CO)(PCy₃)] (Cy = cyclohexyl) with acid 1. The structures of 1, 6 · CHCl₃, and 7 · 1/2 CH₂Cl₂, 10, and hydrated complexes 9 and 12 were determined by single-crystal X-ray diffraction.     

Synthesis, structural characterization, and reactivity of organolanthanides derived from a new chiral ligand (S)-2-(pyrrol-2-ylmethyleneamino)-2′-hydroxy-1,1′-binaphthyl

Condensation of (S)-2-amino-2′-hydroxy-1,1′-binaphthyl with 1 equiv. of pyrrole-2-carboxaldehyde in toluene in the presence of molecular sieves at 70 °C gives (S)-2-(pyrrol-2-ylmethyleneamino)-2′-hydroxy-1,1′-binaphthyl (1H₂) in 90% yield. Deprotonation of 1H₂ with NaH in THF, followed by reaction with LnCl₃ in THF gives, after recrystallization from a toluene or benzene solution, dinuclear complexes (1)₃Y₂(thf)₂ · 3C₇H₈ (3 · 3C₇H₈) and (1)₃Yb₂(thf)₂ · 3C₆H₆ (4 · 3C₆H₆), respectively, in good yields. Treatment of 1H₂ with Ln[N(SiMe₃)₂]₃ in toluene under reflux, followed by recrystallization from a benzene solution gives the dimeric amido complexes {1-LnN(SiMe₃)₂}₂ · 2C₆H₆ (Ln = Y (5 · 2C₆H₆), Yb (6 · 2C₆H₆)) in good yields. All compounds have been characterized by various spectroscopic techniques, elemental analyses and X-ray diffraction analyses. Complexes 5 and 6 are active catalysts for the polymerization of methyl methacrylate (MMA) in toluene, affording syn-rich poly-(MMA)s.     

Preparation, crystal structure, and spectroscopic, chemical, and electrochemical properties of (2E,4E)-4-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)-1,3-butadiene compared with those of (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene

Wittig reaction of 3-[4-(dimethylamino)phenyl]propanal (5) with (3-guaiazulenylmethyl)triphenylphosphonium bromide (4) in ethanol containing NaOEt at 25 °C for 24 h under argon gives the title (2E,4E)-1,3-butadiene derivative 6E in 19% isolated yield. Spectroscopic properties, crystal structure, and electrochemical behavior of the obtained new extended π-electron system 6E, compared with those of the previously reported (E)-2-[4-(dimethylamino)phenyl]-1-(3-guaiazulenyl)ethylene (12), are documented. Furthermore, reaction of 6E with 1,1,2,2-tetracyanoethylene (TCNE) in benzene at 25 °C for 24 h under argon affords a new Diels-Alder adduct 8 in 59% isolated yield. Along with spectroscopic properties of the [π4+π2] cycloaddition product 8, the crystal structure, possessing a cis-3,6-substituted 1,1,2,2-tetracyano-4-cyclohexene unit, is shown. Moreover, reaction of 6E with (E)-1,2-dicyanoethylene (DCNE) under the same reaction conditions as the above gives no product; however, this reaction in p-xylene at reflux temperature (138 °C) for four days under argon affords a new Diels-Alder adduct 9 in 54% isolated yield. Although reaction of 6E with DCNE in toluene at reflux temperature (110 °C) for four days under argon provides 9 very slightly, reaction of 6E with dimethyl acetylenedicarboxylate (DMAD) in toluene at reflux temperature for two days under argon yields a new Diels-Alder adduct 10, in 58% isolated yield, which upon oxidation with MnO₂ in CH₂Cl₂ at 25 °C for 1 h gives 11, converting a (CH₃)₂N-4″ into CH₃NH-4″ group, in 37% isolated yield. The crystal structure of 11 supports the molecular structure 10 possessing a partial structure cis-3,6-substituted 1,2-dimethoxycarbonyl-1,4-cyclohexadiene. The title basic studies on the above are reported in detail.     

The synthesis of oligoether-substituted benzimidazolium bromides and their use as ligand precursors for the Pd-catalyzed Heck coupling in water

The oligoether-substituted (CH₃(OCH₂CH₂)_n-; n = 1, 2 or 3) benzimidazolium bromides (3-7) and oligoether-linked (-CH₂(CH₂OCH₂)_nCH₂-, n = 1, 2 or 3) bisbenzimidazolium dibromides (8-13) were prepared by quarternization of N-substituted benzimidazoles (1 and 2) with the bulky benzyl bromides (ArCH₂Br: Ar = C₆H₂(CH₃)₃-2,4,6 and C₆(CH₃)₅). trans-Bis(carbene) palladium(II) complexes 14 and 15 derived from 4 and 6 were synthesized by using Ag complexes as carbene-transfer agents in dichloromethane at ambient temperature. In addition, the reactions of 4 and 6 with Pd(OAc)₂ and NaBr gave the Pd(II) dimers 16 and 17 which can readily be cleaved by triphenylphosphine to afford the benzannulated monocarbene (NHC) monophosphine Pd(II) complexes [PdBr₂(NHC)(PPh₃)] (18 and 19). All compounds have been fully characterized by using elemental analysis, ¹H, ¹³C and ³¹P NMR spectroscopies. X-ray diffraction studies on single crystals of 19a and 19b confirm the cis square planar geometry. In situ formed complexes from Pd(OAc)₂ and benzimidazolium salts (3-13) and preformed Pd(II) complexes 14, 15, 18 and 19 were tested as catalyst for the Heck coupling reaction in water. The influence of the oligoether and benzyl substituents on N atoms and CH₃-substituents on the 5,6-positions of benzimidazole frame were investigated under the same conditions in the Heck coupling reaction. In situ formed catalysts showed better conversions than the isolated Pd(II) complexes. The length of the oligoether spacer significantly increases the activity. The salts with two benzimidazole moieties connected by an oligoether as the spacer 8-13 showed similar catalytic activities in the Heck coupling reaction with the mono salts 3-7 bearing corresponding oligoethers on the N atom.     

Synthesis of sulfur containing analogues of the soluble guanylate cyclase inhibitor 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazin-1-one NS2028

Sulfur analogues of the soluble guanylate cyclase (sGC) inhibitor NS2028 1a are synthesized. Treating 8-bromo-2H-benzo[b][1,4]oxazin-3(4H)-one oxime (6) with 1,1′-thiocarbonyldiimidazole (1.1 equiv) gave the carbamothioate 8-bromo-4H-[1,2,4]oxadiazolo[3,4-c][1,4]benzoxazine-1-thione (3a) in 83% yield. Alternatively reacting NS2028 1a with P₂S₅ (0.5 equiv) affords the carbamothioate 3a in 80% yield. Similar treatment of 8-aryl substituted NS2028 analogues 1b-d with P₂S₅ gave the carbamothioates 3b-d in 64-91% yields. Although quite stable, the carbamothioates 3a-d could be thermally isomerized in the presence of Cu (10 mol %) to afford the thiocarbamates 4a-d in high yields. Interestingly, in the case of carbamothioate 3a Pd and In metals also facilitated the isomerization. Furthermore, treatment of the thiocarbamates 4a-d with P₂S₅ (0.5 equiv) affords the carbamodithioates 5a-d in 72-89% yields. All new compounds are fully characterized including single crystal X-ray data for carbamothioate 3a and thiocarbamate 4a. Finally, a mechanism is proposed for the carbamothioate to thiocarbamate isomerization.     

Palladium complexes of 8-(di-tert-butylphosphinooxy) quinoline

The preparation of the new ligand 8-(di-tert-butylphosphinooxy)quinoline (1) and the palladium derivatives [PdCl₂(1)] (2), [Pd(η³-all)(1)]⁺ [all = C₃H₅ (3a), 1-PhC₃H₄ (3b) and 1,3-Ph₂C₃H₃ (3c)] and [Pd(η²-ol)(1)] [ol = dimethyl fumarate (4a) and fumaronitrile (4b)] is reported. The cationic species 3a-3c have been isolated as salts. The complex 3a(BF₄) is obtained either from the reaction of 1 with [Pd(μ-Cl)(η³-C₃H₅)]₂ or from the reaction of ClP(CMe₃)₂ with [Pd(η³-C₃H₅)(8-oxyquinoline)], followed in both cases by chloride abstraction with NaBF₄. In the complexes, the ligand 1 is P,N chelated to the central metal, as shown by the X-ray structural analysis of 3a(BF₄). At 25 °C in solution, 3a(BF₄) and 3b(BF₄) undergo a fast η³−η¹−η³ dynamic process which brings about a syn-anti exchange only for the allylic protons cis to phosphorus, while for 4a and 4b a slow rotation of the olefin around its bond axis to palladium takes place. The complexes 2 and 3a(BF₄) are efficient catalyst precursors in the coupling of the phenylboronic acid with aryl bromides and chlorides.     

Dinuclear copper(II) perchlorate complexes with 6-(benzylamino)purine derivatives: Synthesis,X-ray structure,magnetism and antiradical activity

The reactions of Cu(ClO₄)₂·6H₂O with 6-(benzylamino)purine derivatives in a stoichiometric 1:2 metal-to-ligand ratio led to the formation of penta-coordinated dinuclear complexes of the formula [Cu₂(μ-L^1–8)₄(ClO₄)₂](ClO₄)₂·nsolv, where L¹ = 6-(2-fluorobenzylamino)purine (complex 1), L² = 6-(3-fluorobenzylamino)purine (2), L³ = 6-(4-fluorobenzylamino)purine (3), L⁴ = 6-(2-chlorobenzylamino)purine (4), L⁵ = 6-(3-chlorobenzylamino)purine (5), L⁶ = 6-(4-chlorobenzylamino)purine (6), L⁷ = 6-(3-methoxybenzylamino)purine (7) and L⁸ = 6-(4-methoxybenzylamino)purine (8); n = 0–4 and solv = H₂O, EtOH or MeOH. All the complexes have been fully characterized by elemental analysis, FTIR, UV–Vis and EPR spectroscopy, and by magnetic and conductivity measurements. Variable temperature (80–300 K) magnetic susceptibility data of 1–8 showed the presence of a strong antiferromagnetic exchange interaction between two Cu(II) (S = 1/2) atoms with J ranging from −150.0(1) to −160.3(2) cm⁻¹. The compound 6·4EtOH·H₂O was structurally characterized by single crystal X-ray analysis. The Cu?Cu separation has been found to be 2.9092(8) Å. The antiradical activity of the prepared compounds was tested by in vitro SOD-mimic assay with IC₅₀ in the range 8.67–41.45 μM. The results of an in vivo antidiabetic activity assay were inconclusive and the glycaemia in pre-treated animals did not differ significantly from the positive control.     

Preparation of 2,2-difluoro-1-trialkylsilylethenylstannanes and their cross-coupling reactions

Reaction of 2 with bis(tributyltin) in the presence of 3 mol % Pd₂(dba)₃, 6 mol % XPhos, and 30 equiv of LiBr in wet and air bubbled THF at reflux for 8 h afforded the desired products 3 in 73–74% yields. The cross-coupling reaction of 3a with aryl iodides in the presence of 10 mol % Pd(PPh₃)₄ and 10 mol % CuI afforded the coupled products 4a–p in 47–90% yields. The coupling reaction of 3b with various alkynyl bromides having aryl-, alkyl, or trialkylsilyl group also afforded the corresponding 1,3-enynes 5a–g in 61–77% yields.     

Syntheses, crystal structures and coordination modes of tri- and di-organotin derivatives with 2-mercapto-4-methylpyrimidine

The organotin (IV) derivatives of 2-mercapto-4-methylpyrimidine (Hmpymt) R₃SnL (R = Ph 1, PhCH₂2, n-Bu 3), R₂SnCl_mL_n (m = 1, n = 1, R = CH₃4, Ph 5, n-Bu 6, PhCH₂7; m = 0, n = 2, R = CH₃8, n-Bu 9, Ph 10, PhCH₂11) were obtained by the reaction of the organotin(IV) chlorides R₃SnCl or R₂SnCl₂ with 2-mercapto-4-methylpyrimidine hydrochloride (HCl · Hmpymt) in 1:1 or 1:2 molar ratio. All complexes 1-11 were characterized by elemental analyses, IR, ¹H, ¹³C and temperature-dependent ¹¹⁹Sn NMR spectra. Except for complexes 3 and 6, the structures of complexes 1, 2, 4, 5, 7, 8-11 were confirmed by X-ray crystallography. Including tin-nitrogen intramolecular interaction, the tin atoms of complexes 1-7 are all five-coordinated and their geometries are distorted trigonal bipyramidal. While the tin atoms of complexes 8-11 are six-coordinated and their geometries are distorted octahedral. Besides, the ligand adopts the different coordination modes to bond to tin atom between the complexes 1, 6, 7 and 2, 3, 4, 5, 8-11. Furthermore, intermolecular Sn?N or Sn?S interactions were recognized in crystal structures of complexes 4, 7 and 11, respectively.     

Subtle role of counteranions in molecular construction: Structures and properties of novel Cu(II) coordination complexes with bis-(1-benzoimidazolymethylene)-(2,5-thiadiazoly)-disulfide

The direct self-assembly of bis-(1-benzoimidazolymethylene)-(2,5-thiadiazoly)-disulfide (L) with CuSO₄, Cu(NO₃)₂ and CuCl₂ affords three novel supramolecular complexes: 1-D ladder-like chain complex {[Cu(SO₄)(L)] · (CH₃OH)}_n (1), dimer complexes {[Cu(L)(CH₃O)]₂(NO₃)₂} · 2H₂O (2) and [Cu(L)(Cl)(N₃)]₂ · 2CH₃OH (3). The nature of the anions is the underlying reason behind the differences in the structures of this series of complexes. Furthermore, utilizing the coordinatively unsaturated complexes 2 and 3 as precursor complexes, two new derivative complexes [Cu(L)(NCS)(CH₃O)]₂ · 2CH₃OH (2A) and [Cu(L)(ClO₄)(N₃)]₂ · 2CH₃OH (3A) are obtained by the addition and exchange reactions of complexes 2 and 3 with anions. X-ray crystallographic analysis shows that the two derivatives retain the skeletons of their precursor complexes, and the anions with the stronger coordination capacity only bind to the active position of precursor complexes. In addition, different from the obvious effects on the structures in the direct self-assembly of the metal and ligand, the change of counteranions has no great impact on the structures in the anion exchange reactions. We also study the catalytic activities of the complexes 2, 2A, 3, and 3A, which have similar skeletons, for the oxidative coupling polymerization of 2,6-dimethylphenol (DMP). And we find that the introductions of different coordination counterions produce significant impacts on the catalytic properties of these complexes.     

Dinuclear copper(I) complexes of tris(3,5-dimethylpyrazol-1-yl)methane: Synthesis, structure, and reactivity

The reaction of [Cu(NCMe)₄](BF₄) with equimolar amounts of the tris(substituted-pyrazolyl)methane ligand HCPz₃ or HC(3,5-Me₂Pz)₃ yields the respective salts [Cu(HCPz₃)(NCMe)](BF₄) (1a) or [Cu(HC(3,5-Me₂Pz)₃)(NCMe)](BF₄) (1). The acetonitrile ligand of 1 can be replaced by prazine, 4,4′-dipyridine or 1,4-diisocyanobenzene to yield related mononuclear complexes [Cu(HC(3,5-Me₂Pz)₃)(pyrazine)](BF₄) (2), [Cu(HC(3,5-Me₂Pz)₃)(4,4′-bipyridine)] (BF₄) (3) or [Cu(HC(3,5-Me₂Pz)₃)(1,4- CNC₆H₄NC)](BF₄) (7), respectively. A series of binuclear copper(I) complexes {[Cu(HC(3,5-Me₂Pz)₃)]₂(μ -BL)}(BF₄)₂ (4, BL = pyrazine; 5, BL = 4,4′-dipyridine; 8, BL = 1,4-diisocyanobenzene) were prepared by treating equal molar ratio of 1 with related mononuclear complexes 2, 3 and 7. In addition, binuclear copper(I) complexes were also prepared from treatment of 2 equiv of 1 with the related bridge ligand. Both of 4 and 5 reformed mononuclear starting complex 1 in acetonitrile solution. However, the more robust complex 8 was stable in acetonitrile solutions. The structure of complexes 1a, 4, 5, and 7 were confirmed by X-ray crystallography. The redox properties of 4 and 8 were examined by cyclic voltammetry and exhibited two quasi-reversible waves suggesting that no significant structural reorganization occurs during the redox process on the electrochemical time scale.