Arylcyanation of alkynes catalyzed by nickel

A nickel catalyst prepared from Ni(cod)₂ and PMe₃ is found to effect arylcyanation reaction of alkynes, namely, cleavage of a C-CN bond of an aryl cyanide followed by addition of each fragment across an alkyne. A wide range of functional groups in aryl cyanides tolerated the catalysis, giving variously functionalized β-arylalkenenitriles stereoselectively.     

Hydrocarboxylation of unactivated internal alkynes with carboxylic acids catalyzed by dinuclear palladium complexes

Dinuclear palladium complexes catalyzed addition reactions of carboxylic acid O-H bond to unactivated internal alkynes. The reaction afforded a trans-adduct selectively.     

Addition of alkynes at bridging vinyliminium ligands in diiron complexes: Unprecedented diene formation by enyne-like metathesis

The zwitterionic bridging vinyliminium complex [Fe₂{μ-η¹:η³-C(Tol)C(CS₂)CN(Me)₂}(μ-CO)(CO)(Cp)₂] (5a) undergoes the addition of two equivalents of MeO₂C-CC-CO₂Me affording the bridging bis-alkylidene complex [Fe₂{μ-η¹:η³-C(Me)C{C(CO₂Me)C(CO₂Me)CSC(CO₂Me)C(CO₂Me)S}CNMe₂}(μ-CO)(CO)(Cp)₂] (6). One alkyne unit inserts into a C-CS₂ bond of the bridging ligand, with consequent rearrangement that leads to the formation of a diene. The reaction shows analogies with the enyne metathesis. The second alkyne is incorporated into the bridging frame via cycloaddition at the thiocarboxylate function, affording a 1,3-dithiolene. The complexes [Fe₂{μ-η¹:η³-C(R′)C(CS₂)CN(Me)(R)}(μ-CO)(CO)(Cp)₂] (R = Xyl, R′ = Tol, 5b; R = p-C₆H₄OMe, R′ = Me, 5c; Xyl = 2,6-Me₂C₆H₃), treated with MeO₂C-CC-CO₂Me and then with HBF₄, undergo the cycloaddition of the alkyne with the dithiocarboxylate group and protonation of the dithiocarboxylate carbon, affording the complexes [Fe₂{μ-η¹:η³-C(R′)C{C(H)SC(CO₂Me)C(CO₂Me)S}CN(Me)(R)}(μ-CO)(CO)(Cp)₂][BF₄] (R = Xyl, R′ = Tol, 7a; R = p-C₆H₄OMe, R′ = Me, 7b), respectively.The X-ray molecular structure of 6 has been determined.     

Hydrosilylation of alkynes catalyzed by ruthenium carbene complexes

Hydrosilylation of terminal alkynes with a variety of silanes catalyzed by Cl₂(PCy₃)₂RuCHPh (1) affords mainly the Z-isomer via trans addition in excellent yields. The presence of a hydroxyl group in close proximity to the triple bond was observed to exert a strong directing effect, resulting in the highly selective formation of the α-isomer. Intramolecular hydrosilylation of a homopropargylic silyl ether was demonstrated to give the cis addition product.     

基于铁催化的C-H键活化构建C-C键的研究进展

过渡金属催化的C-H键活化及在此基础上的C-C键形成的反应因其高原子经济性和高效的合成效率而备受人们的关注.铁元素具有含量丰富、廉价、易得、环境友好等优点,在催化反应中得到了越来越广泛的应用.近几年来,人们关于Fe催化的C-H键活化构建C-C键反应的研究也取得了一定的进展.本文对铁催化的C-H键活化构建C-C键的最新研究进展作了综述,并且按照铁催化剂的不同价态进行了分类归纳,也对催化机理进行了阐述与总结.     

Nickel-catalyzed multi-component coupling reaction of aldimine, alkyne, and dimethylzinc via dimerization of butadiene

In the presence of a Ni/phosphine ligand catalyst, dimethylzinc, alkyne, butadiene, aldehyde, and primary amine were successively combined via dimerization of butadiene to provide (3E,7E,10Z)-dodecatrienylamine in good yields with excellent regio and stereoselectivities.     

Selective cis-addition of C-H bonds of pyrroles and thiophenes to alkynes catalyzed by a dinuclear palladium complex

Pyrroles and thiophenes reacted with alkynes in the presence of dinuclear palladium complexes with high stereoselectivity (cis-addition) in almost all cases. While regioselectivity in the reaction with pyrroles depended on substituents on the nitrogen atom and alkynes, all reactions of thiophenes afforded 2-alkenylthiophenes.     

镍催化偶联反应机理研究进展(英文)

近期发展了很多镍催化的偶联反应作为在有机合成中高效构建C–C键的方法,同时开展了很多关于控制镍催化反应活性和选择性的机理研究.这些研究发现,镍催化反应机理往往和相应的钯催化反应机理不同,因为镍催化偶联经常包括自由基和双金属机理.本文总结了镍催化偶联反应机理的最新进展.对于这些反应机理的理解为发展具有更高效率和选择性的镍催化偶联反应提供了帮助.     

Regioselectivity in nickel(0)/phosphine catalyzed cycloadditions of alkynes and isocyanates

The regioselectivity of Ni(0)-catalyzed cycloadditions of various isocyanates and asymmetrical alkynes to afford pyridones was explored. The use of PEt₃ provided, in most cases, two of the four possible pyridone regioisomers in high overall yields. Mechanistic rationale for the product distribution is provided.     

Mechanistic study of palladium catalyzed S-S and Se-Se bonds addition to alkynes

The mechanistic study of palladium catalyzed S-S and Se-Se bonds addition to alkynes revealed the involvement of dinuclear transition metal complexes in the catalytic cycle. Coordination of alkyne to dinuclear transition metal complex was found to be the rate determining step of the reaction. An unusual phosphine ligand effect increasing the yield of addition reaction was found in the studied system. A new synthetic procedure was developed to perform the catalytic reaction using easily available Pd(II) complex. The scope of the reaction and the reactivity of S-S and Se-Se bonds toward alkynes were investigated. The X-ray structure of the product of S-S bond addition reaction showed favorable geometry for the possible application as a chelate ligand.     

Selective annulation of benzamides with internal alkynes catalyzed by an electron-deficient rhodium catalyst

An electron-deficient [Cp^ERhCl₂]₂ catalyzed annulation of N-pentafluorophenylbenzamides with internal alkynes was successfully established under mild reaction conditions, with the assistance of Lewis acid silver salt. Particularly, electron-deficient benzamide substrates were smoothly transformed into the desired products in this catalytic system. The catalytic system showed a broad tolerance for different substituents on the aromatic rings or aryl, alkyl-substituted alkynes.     

An efficient copper(I) complex catalyzed Sonogashira type cross-coupling of aryl halides with terminal alkynes

A wide range of arylated alkynes are synthesized from the corresponding aryl halides and terminal alkynes through Sonogashira type cross-coupling reactions through C(aryl)-C bond formation in the presence of a catalytic amount of N,N′-dibenzyl BINAM-CuI complex under mild reaction conditions.     

Intermolecular Morita-Baylis-Hillman reactions using dicobalthexacarbonyl complexed acetylenic acetals

An intermolecular Morita-Baylis-Hillman (MBH) reaction using dicobalthexacarbonyl complexed acetylenic acetals as the electrophile is reported. Employing BF₃-OEt₂ as the Lewis acid with a sulfide as the Lewis base MBH adducts were obtained.     

Divergent intramolecular reactions between phosphines and alkynes

A divergent intramolecular reaction of phosphine tethered alkyne in protic solvent was developed.This provided a novel and simple access to a large variety of(Z)-alkenylphosphine oxides and phospholane oxides.Our preliminary studies suggested that these divergent reactions are closely related to the reaction condition and molecular structure.A possible mechanism of C-P bond cleavage of a pentacoordinated hydroxyphosphorane intermediate was proposed.     

Microwave-assisted direct addition of cycloethers to alkynes

Under microwave conditions, tetrahydrofuran (THF), tetrahydropyran and 1,4-dioxane are added directly onto alkynes and generated various vinyl cycloethers.     

Transition metal catalyzed hydroarylation of olefins using unactivated substrates: Recent developments and challenges

The addition of aromatic C-H bonds across olefin CC bonds (olefin hydroarylation) is an important synthetic methodology for the preparation of alkylated arenes. Traditional methods utilizing Friedel-Crafts catalysts result in a significant waste stream and substantial polyalkyated products. In order to achieve high overall yield of monoalkylated compounds, Friedel-Crafts catalysis must be combined with a second transalkylation catalytic step. Reactions that incorporate substituted olefins are selective for branched products. In addition, the regioselective synthesis of disubstituted alkyl arenes is difficult to achieve. Recent development of transition metal based catalysts provides non-Friedel-Crafts pathways for the production of alkyl arenes. Systems based on Ru(II), Ir(III), and Pt(II) have been developed, and mechanistic studies have begun to provide insight into the details of these catalysts. Herein, we review recently published results in the area of transition metal catalyzed olefin hydroarylation with a comparison of known catalysts and discussion of challenges yet to be overcome.     

Recent advances in the synthetic and mechanistic aspects of the ruthenium-catalyzed carbon-heteroatom bond forming reactions of alkenes and alkynes

The group’s recent advances in catalytic carbon-to-heteroatom bond forming reactions of alkenes and alkynes are described. For the C-O bond formation reaction, a well-defined bifunctional ruthenium-amido catalyst has been successfully employed for the conjugate addition of alcohols to acrylic compounds. The ruthenium-hydride complex (PCy₃)₂(CO)RuHCl was found to be a highly effective catalyst for the regioselective alkyne-to-carboxylic acid coupling reaction in yielding synthetically useful enol ester products. Cationic ruthenium-hydride catalyst generated in-situ from (PCy₃)₂(CO)RuHCl/HBF₄·OEt₂ was successfully utilized for both the hydroamination and related C-N bond forming reactions of alkenes. For the C-Si bond formation reaction, regio- and stereoselective dehydrosilylation of alkenes and hydrosilylation of alkynes have been developed by using a well-defined ruthenium-hydride catalyst. Scope and mechanistic aspects of these carbon-to-heteroatom bond forming reactions are discussed.     

Ethylene polymerization catalyzed by substituted pyrazole nickel complexes

(Pyrazole)nickel dibromide complexes, (3,5-Me₂pz)₂NiBr₂ (1), (3-Mepz)₄NiBr₂ (2), (pz)₄NiBr₂ (3) and (3,5-^tBu₂pz)₂NiBr₂ (4), were prepared by the reaction of the appropriate pyrazole with (DME)NiBr₂. Solid-state structures of these complexes show a direct relation between the steric bulk of the pyrazole ligand and structure, with more bulky ligands forming four-coordinate complexes (1 and 4) whereas the less bulky ligands formed six-coordinate complexes (2 and 3). Activation of selected complexes (1 and 3) with methylaluminoxane (MAO) produced species that catalyzed the polymerization of ethylene to form high density polyethylene.     

Cationic iridium-BINAP complex-catalyzed addition of aryl ketones to alkynes and alkenes via directed C-H bond cleavage

Cationic Ir complex ([Ir(cod)₂]BF₄ + BINAP) catalyzed the addition of ortho-C-H bonds in aryl ketones to alkynes, which gave alkenylated products in good to high yield. Styrene derivatives were good substrates, and the enantioselective addition to norbornene was also described.     

钌催化C-H键活化构建C-C键反应的研究进展

根据定位基团类型并结合其反应机理,介绍了近几年来钌催化的C-H键活化构建C-C键的研究进展.参考文献40篇.