Interaction between the conjugated polyelectrolyte poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer and the lecithin mimic 1-O-(l-Arginyl)-2,3-O-dilauroyl-sn-glycerol in aqueous solution

In this paper, the interaction between the water-soluble conjugated polyelectrolyte poly{1,4-phenylene[9,9-bis(4-phenoxybutylsulfonate)]fluorene-2,7-diyl} copolymer and the amino acid glyceride conjugate 1-O-(L-arginyl)-2,3-O-dilauroyl-sn-glycerol dichlorohydrate (a mimic for the phospholipid lecithin) has been studied in aqueous solution by electronic spectroscopy (absorption and fluorescence) and small-angle neutron scattering (SANS). A significant increase in the polymer fluorescence and blue shift in its emission are observed on association with the surfactant. This is suggested to be due to breakup of polymer aggregates. In addition, the spectroscopic and photophysical data suggest this is followed by the vesicle to ribbon transition characteristic of this surfactant, leading to incorporation of single chains of the polymer within mixed polymer-surfactant aggregates. Support for this comes from preliminary SANS measurements, from which evidence for polymer dissolution and formation of two-dimensional structures has been obtained.     

一种新型低带隙共轭聚合物的合成及其光学性质

在钯催化剂作用下, 通过4,7-二(5-溴-2-噻吩基)[2,1,3]苯并噻二唑与2,5-二乙炔基-3-辛基噻吩的偶联反应, 合成了一种新的共轭高分子聚4,7-二(2-噻吩基)苯并噻二唑-3-辛基噻吩二炔(PTE-DTBT). 通过紫外可见吸收光谱及荧光光谱对其光学性质进行了研究. 紫外-可见吸收谱结果表明, PTE-DTBT的固体膜光学带隙为1.71 eV; 电化学测试其带隙为1.88 eV. TiO₂/PTE-DTBT共混固体膜的荧光发射谱结果表明电子供体PTE-DTBT分子与电子受体TiO₂分子间存在有效的电子转移.     

Controlling layer thickness and photostability of water-soluble cationic poly(p-phenylenevinylene) in multilayer thin films by surfactant complexation

In this work we build on prior studies of the novel water-soluble cationic conjugated polymer known as "P2" (poly{2,5-bis[3-( N, N, N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene}) with a focus on its incorporation into thin films for such applications as photovoltaics or electroluminescent devices. Multilayer assemblies were constructed using P2, the anionic surfactant sodium dodecyl sulfate (SDS), and the polyanion poly(sodium 4-styrene-sulfonate) (PSS) using the technique of layer-by-layer electrostatic self-assembly (LBL-ESA). SDS was observed to affect the layer thicknesses and absorbance characteristics of the films. We show that the optical properties and photo-oxidative resistance can be improved by varying the SDS content in the assemblies. Specifically, the surfactant-complexed poly( p-phenylenevinylene) (PPV) shows an enhanced absorption at longer wavelengths as well as improved photostability. Therefore, our work may have broad implications on the development of stable PPV-based materials in general and their efficient integration into thin films technologies.     

Tuning the optical properties of a water-soluble cationic poly(p-phenylenevinylene): surfactant complexation with a conjugated polyelectrolyte

In this work, we investigate the emission and absorbance properties of the novel water-soluble cationic conjugated polymer poly{2,5-bis[3-(N,N,N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene}, denoted here as P2, in the presence of varying amounts of the anionic surfactant sodium dodecylsulfate (SDS). We show that the absolute photoluminescence quantum efficiency (PLQE), the absorption wavelength, and the emission wavelength of an aqueous solution of P2 can be adjusted according to the surfactant/polymer ratio in aqueous solution. In particular, we show that the addition of SDS to P2 increases the polyelectrolyte's PLQE to approximately 40%. An observed red shift in the emission spectra upon addition of the surfactant is attributed to the reduction in electrostatic repulsive interactions between side chains that minimize the benzene ring twisting along the backbone structure. At the surfactant's critical micelle concentration, the P2 chains wrap around the outer surface of the SDS micelles. This work has implications on the development of new stable poly(p-phenylenevinylene)-based photovoltaic and electroluminescent materials with tunable optical properties.     

Syntheses, structures, and electrochemical properties of platinum(II) complexes containing di-tert-butylbipyridine and crown ether annelated dithiolate ligands

A series of new platinum(II) complexes containing both 4,4'-di-tert-butyl-2,2'-bipyridine (dbbpy) and the extended tetrathiafulvalenedithiolate ligands have been prepared and characterized. These complexes include [Pt(dbbpy)(C8H4S8)] (1; C8H4S82- = 2-{(4,5-ethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(ptdt)] (2; ptdt = 2-{(4,5-cyclopentodithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(mtdt)] (3; mtdt = 2-{(4,5-methylethylenedithio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(btdt)] (4; btdt = benzotetrathiafulvalenedithiolate), [Pt(dbbpy)(C8H6S8)] (5; C8H6S82- = 2-{4,5-bis(methylthio)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), [Pt(dbbpy)(3O-C6S8)] (6; 3O-C6S82- = 2-{4,5-dithia-(3',6',9'-trioxaundecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate), and [Pt(dbbpy)(4O-C6S8)] (7; 4O-C6S82- = 2-{4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene}-1,3-dithiol-4,5-dithiolate). The crystal structures of a new ligand precursor (2-[4,5-dithia-(3',6',9',12'-tetraoxatetradecyl)-1,3-dithiol-2-ylidene]-4,5-bis(2-cyanoethylsulfanyl)-1,3-dithiole, IIIc) and complexes 5-7 have been determined by X-ray crystallography. Complexes 1-7 show intense electronic absorption bands in the UV-vis region due to the intramolecular mixed metal/ligand-to-ligand charge-transfer transition, and they display significant solvatochromic behavior. Redox properties of these compounds have been investigated by cyclic voltammetry, and complex 7 shows a significant response for Na+ ions with a large positive shift of ca. 45 mV.     

新型亲水性共轭聚合物的制备及光催化制氢性能

制备了聚({4,8-双[(2,5,8,11,14,17,20-七氧二十二烷-22-基)氧基]苯并[1,2-b∶4,5-b']二噻吩}-交替-[2,5-二(噻唑-2-基)吡嗪])(P7O-2N-2N)和聚({4,8-双[(2,5,8,11,14,17,20-七氧二十二烷-22-基)氧基]苯并[1,2-b∶4,5-b']二噻吩}-交替-[3,6-双(5-溴-2-噻吩基)-1,2,4,5-四嗪])(P7O-4N)2个亲水性共轭聚合物, 通过调节主链含氮杂环上氮原子的位置, 系统研究了主链结构对材料吸收光谱、 能级、 氢结合自由能及光催化性能的影响. 研究发现, 与P7O-2N-2N相比, P7O-4N表现出更强的链间聚集、 更低的氢结合自由能及更好的光催化制氢性能.     

Stabilization and Large Nonlinearity of Gold Nanoparticles Functionalized with a π‐Conjugated Polymer

Gold nanoparticles protected by a novel π‐conjugated polymer [poly(p‐phenylene ethynylene) containing pendent disulfide and bipyridine groups] are synthesized and characterized. The polymer can stabilize the gold nanoparticles effectively. The nonlinear optical properties of the gold nanoparticle colloid solutions in toluene are investigated by using the Z‐scan technique at a wavelength of 532 nm and pulse width of 4 ns. The gold‐nanoparticle colloid solutions show an exceptional nonlinear absorption effect, which simultaneously contains the saturated absorption resulting from third‐order nonlinearity and a large reverse‐saturated absorption resulting from fifth‐order nonlinearity. In addition, asymmetric self‐focusing refractive effects are investigated in the colloid solutions.     

旋光性聚{(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯}的合成与表征

设计、合成了一个带有横挂三联苯侧基的手性乙烯基单体——(+)-甲基丙烯酸-2,5-二[4′-((S)-2-甲基丁氧基)苯基]苄酯,进行了普通自由基和原子转移自由基聚合反应.所得聚合物具有比单体低30°左右的比旋光度,且在侧基的紫外吸收处呈现明显不同于单体的Cotton效应,说明其主链可能形成了具有相反旋光方向的螺旋构象.在所研究范围内,聚合条件对聚合物的旋光度没有明显的影响.在分子量较小时,聚合物的比旋光度随着分子量的增加而降低,说明主链螺旋构象的贡献在增大,而当分子量达到一定值后,聚合物的比旋光度不再随分子量的增加而显著变化.     

Conjugated polyelectrolytes with pH-dependent conformations and optical properties

We report here the synthesis and characterization of two new conjugated polymers: poly{2,5-bis[3-(N,N-diethylammonium acetate)-1-oxapropyl]-1,4-phenylenevinylene} (P1') and poly{2,5-bis[3-(N,N,N-triethylammonium bromide)-1-oxapropyl]-1,4-phenylenevinylene} (P2). Both polymers exhibit unique pH-dependent optical properties in aqueous solution. These pH-dependent optical properties are attributed to the mutual electrostatic repulsions of positive charges pendent on the benzene rings. This electrostatic repulsion leads to an increased or decreased torsional angle in the conjugated backbone, thus affecting the effective conjugation length of these polymers. The UV-vis spectra of P1 in various pH solutions exhibit a near-isosbestic point, which indicates changes in the composition of the two distinct conformations (the charged and the neutral forms). The transition between the highly charged state and the neutral state was clearly observed in the UV-vis and photoluminescence studies on both P1 and P2. This transition is particularly sensitive in the pH range from 6.2 to 7.0, a range that would allow the detection of minor environmental changes. P2 has a quantum efficiency of 14% in water, which is considered to be relatively high among water-soluble PPVs.     

A novel cationic conjugated polymer for homogeneous fluorescence-based DNA detection

A novel water-soluble cationic conjugated polymer, poly({2,5-bis[3-(N,N-diethylamino)-1-oxapropyl]-para-phenylenevinylene}-alt-para-phenylenevinylene) dibromide, was synthesized and used to develop a simple label-free DNA detection essay.     

一种含噁二唑基甲壳型聚合物的合成与表征

电荷传输材料(空穴或电子传输)广泛应用于电致发光、有机光电池、非线性光学等领域．有机电荷传输材料可分为有机小分子和聚合物两类．有机小分子构建传输层时存在(1)与成膜性聚合物的相容性;(2)容易出现析出、结晶或团聚;(3)热稳定性差及机械强度欠佳．克服这些不足的途径之一是制备有电荷传输性能的聚合物,这种聚合物可以通过在主链或侧链接入含有电荷传输功     

（＋）-甲基丙烯酸{2,5-双[4′-（（S）-2-甲基丁氧基）苯基]苯基}酯的合成及其螺旋选择性自由基聚合

设计合成了手性单体（＋）-甲基丙烯酸{2,5-双[4′-（（S）-2-甲基丁氧基）苯基]苯基}酯,并进行了自由基溶液聚合.相比于单体,聚合物的比旋光度有显著的同向增长,且在其圆二色光谱上对应于三联苯侧基以及酯基的吸收区域呈现明显的Cotton效应,说明其主链可能采取某一旋向占优的螺旋构象.研究了聚合条件对聚合物旋光性质的影响.结果表明,采用极性大的芳香族溶剂或增加单体浓度有利于获得旋光度大的聚合物;随聚合温度增加,聚合物旋光度先增加后减小,在80℃时聚合达到最大值.该聚合物比甲基丙烯酸三芳基甲基酯类光学活性螺旋链聚合物具有更好的化学结构稳定性和立体结构稳定性.     

Single molecule nanoparticles of the conjugated polymer MEH-PPV, preparation and characterization by near-field scanning optical microscopy

We have developed a straightforward method for producing a stable, aqueous suspension of hydrophobic, fluorescent pi-conjugated polymer nanoparticles consisting primarily of individual conjugated polymer molecules. Features of the method are the facile preparation, purity, unique optical properties, and small size (approximately 5-10 nm) of the resulting nanoparticles. The results of TEM, scanning force microscopy, and near-field scanning optical microscopy of particles cast from the suspension indicate that the particles are single conjugated polymer molecules. The NSOM results yield estimates of the optical cross-sections of individual conjugated polymer molecules. The UV-vis absorption spectra of the nanoparticle suspensions indicate a reduction in conjugation length attributed to deformations of the polymer backbone. Fluorescence spectra of the aqueous nanoparticle suspensions indicate interactions between segments of the polymer chain and intramolecular energy transfer.     

Enhanced two-photon singlet oxygen generation by photosensitizer-doped conjugated polymer nanoparticles

We have prepared photosensitizer-doped conjugated polymer nanoparticles by using a reprecipitation method. The conjugated polymer, poly[9,9-dibromohexylfluorene-2,7-ylenethylene-alt-1,4-(2,5-dimethoxy)phenylene] (PFEMO), was used as the host matrix to disperse tetraphenylporphyrin (TPP). These TPP-doped PFEMO nanoparticles are stable and have a uniform size of ～50 nm. Efficient intraparticle energy transfer from PFEMO to TPP has been observed. The TPP emission of the nanoparticles was found to be enhanced by 21-fold by PFEMO under two-photon excitation. Enhanced two-photon excitation singlet oxygen generation efficiency in the TPP-doped PFEMO nanoparticles has been demonstrated. Our results suggest that these photosensitizer-doped conjugated polymer nanoparticles can act as novel photosensitizing agents for two-photon photodynamic therapy and related applications.     

Modulating the Properties of Azulene‐containing Polymers Through Functionalization at the 2‐Position of Azulene

Poly(2‐arylazulene‐alt‐fluorene) and poly(2‐arylazulene‐alt‐thiophene) are synthesized via Suzuki and Stille cross‐coupling polymerization, respectively, using 1,3‐dibromo‐2‐arylazulenes as monomers, which are prepared by a novel directed C?H activation method of 2‐carboxylic azulene and subsequent bromination reaction. Our study shows that functionalization at the 2‐position of azulene monomers influences polymer properties. For instance, different from electron‐withdrawing groups that discourage the protonation of azulene, electron‐donating aryl groups, however, enhances the sensitivity of response to acid. Protonation of the polymers leads to significant shifts in absorption spectra accompanying with obvious color changes from green to brown in majority cases because of the formation of poly(azulenium cation). The electrochromic properties of polymers are examined, exhibiting that nature of aryl group at the 2‐position of azulene influences the stability of their electrochromic devices.     

Nanoparticle Size and Concentration Dependence of the Electroactive Phase Content and Electrical and Optical Properties of Ag/Poly(vinylidene fluoride) Composites

This paper describes the processing of silver‐nanoparticle‐doped poly(vinylidene fluoride). The effects of the concentration and size of the filler on the electroactive phase of the polymer and the optical and electrical properties are discussed. Spherical silver nanoparticles incorporated into the poly(vinylidene fluoride) polymeric matrix induce nucleation of the electroactive γ phase. The electroactive phase content strongly depends on the content and size of the nanoparticles. In particular, there is a critical nanoparticle size, below which the filler losses its nucleation efficiency due to its small size relative to that of the polymer macromolecules. Furthermore, the presence of surface plasmon resonance absorption in the composites is observed, which once again shows a strong dependence on the concentration and size of the particles. The absorption is larger for higher concentrations, and for a given concentration increases with particle size. This behavior is correlated to the electrical response and is related to the extra bands and electrons provided by the nanoparticles in the large energy band gap of the polymer.     

Theoretical and experimental study of low band gap polymers for organic solar cells

A combined theoretical and experimental investigation of the electronic structure and optical properties of poly(3-hexylthiophene) (P3HT), poly[3-(4-octylphenyl)thiophene] (POPT) and poly[3-(4-octylphenoxy)thiophene] (POPOT) is reported. In comparison with P3HT, POPT and POPOT exhibit better stabilities and the presence of an oxygen atom and/or a phenyl ring in the side chains enhances conjugation. Quantum chemical calculations have been performed on oligomers of increasing chain length to establish the changes in the electronic and optical properties when going from P3HT to the new derivative POPOT. The knowledge of the structure of these polymers is of utmost importance in understanding their optical properties in different phases (solution and condensed phase). The calculations indicate that, in opposition to P3HT and POPT polymers where the introduction of alkyl chains and the pendant phenyl disturbs the planarity of the backbone of the conjugated segment, POPOT has a better degree of organization in both states: the conjugated chain remains planar even in the presence of the phenoxy groups. Finally, the exciton binding energy is evaluated for these polymers and allows us to conclude that the POPOT is a promising polymer for photovoltaic applications when compared to P3HT and POPT.     

SYNTHESIS AND OPTICAL-ELECTRONIC PROPERTIES OF POLY [METHYLTETRAPHENYLPHENYLSILYLENE-CO- BIS（METHYLPHENYLSILYL）ACETYLENE]

Poly(methyltetraphenylphenylsilylene-co-bis(methylphenylsilyl)acetylene) (PSA) was synthesized by the cocondensation reaction of methyltetraphenylphenyldichlorosilane and bis(chloromethylphenylsilyl)acetylene with sodium in toluene. The PSA thus obtained was soluble in most organic solvents, and its molecular weight was smaller than that of poly[(disilanylene)acetylenes] with alkyl- or aryl-substitution because of the great steric congestion of tetraphenylphenyl groups. The optical and electronic properties of the polymer were investigated. The results show that PSA has strong UV absorption and fluorescence emission, the maximum UV absorption wavelength of PSA is 330 nm, which shows a considerable red-shift in comparison with that of poly(methylphenylsilylene-co-methylphenylsilylacetylene) (PSI) and alkylsubstituted poly[(disilanylene)acetylenes]. A strong photoluminescence band at 470 nm in THF and 432 nm in benzene can be observed in the visible region, respectively. Treatment of the films of PSA with I2 vapor afforded conducting films. The conductivity of PSA thin film doped with I2 was measured to be 0.35 Scm-1 in the air which is lower than that of poly(methyltetraphenylphenylsilylene-co-bis(methylphenylsilyl)phenylene), but higher than that of σ-π polymers without tetraphenylphenyl groups. As an explanation, the tetraphenylphenyl group is a large π-electron-conjugated group; after being introduced to the Si atoms of the polysilanes, the interaction between π-electrons of the tetraphenylphenyl groups and the σ-electrons conjugated along the Si-Si bonds is increased strongly, and the σ-electrons can be conjugated more extensively along the main chain of the polysilanes.     

Nanocomposites based on polyimide thermoplastics and magnesium silicate nanoparticles with montmorillonite structure

Nanocomposites based on a thermoplastic polyimide, poly{1,3-bis(3′,4-dicarboxyphenoxy)benzene[4,4′-bis(4″-N-phenoxy)diphenyl sulfone]imide}, and synthetic magnesium silicate nanoparticles with montmorillonite structure were prepared from melts. Efficient modification of the surface of the initial nanoparticles with (aminoethylaminomethyl)phenethyltrimethoxysilane was performed.     

Formation and photoluminescence of silver nanoparticles stabilized by a two-armed polymer with a crown ether core

Silver nanoparticles were synthesized by the use of a two-armed polymer with a crown ether core [poly(styrene)]-dibenzo-18-crown-6-[poly(styrene)] based on the flexibility of the polymer chains and the complex effect of crown ether with Ag(+) and Ag. The size of silver nanoparticles could be tailored by controlling the initial concentrations of the polymer and Ag(+), and the molecular weight of the polymer. The emission of silver nanoparticles was blue-shifted, and the intensity of the photoluminescence of silver nanoparticles stabilized by the polymer was significantly increased due to the complex effect between the crown ether embedded in the polymer and the silver nanoparticles.